| Age | Commit message (Collapse) | Author |
|---|
|
Add support for the Variscite VAR-SOM-IMX93 evaluation kit. The SoM
consists of an NXP iMX93 dual A55 CPU. The SoM is mounted on a Variscite
Symphony SBC.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
|
|
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
|
|
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Provide a configuration fragment to enable ACPI on QEMU.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Standard passage provides for a bloblist to be passed from one firmware
phase to the next. That can be used to pass the devicetree along as well.
Add an option to support this.
Tests for this will be added as part of the Universal Payload work.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
Documentation updates for endeavoru, lg_x3, grouper and transformers,
addition of MIPI calibration clock name for T114 (inline with T124+),
conversion of TEGRA_SUPPORT_NON_SECURE into Kconfig and endeavoru
stability improvements.
|
|
Manorit Chawdhry <m-chawdhry@ti.com> says:
K3 devices have firewalls that are used to prevent illegal accesses to
memory regions that are deemed secure. The series prevents the illegal
accesses to ATF and OP-TEE regions that are present in different K3
devices.
AM62X, AM62AX and AM64X are currently in hold due to some firewall
configurations that our System Controller (TIFS) needs to handle.
The devices that are not configured with the firewalling nodes will not
be affected and can continue to work fine until the firewall nodes are
added so will be a non-blocking merge.
Test Logs: https://gist.github.com/manorit2001/4cead2fb3a19eb5d19005b3f54682627
CICD Run: https://github.com/u-boot/u-boot/pull/442
|
|
This commit adds a general flow to explain the usage of firewalls and
the chain of trust in K3 devices.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
|
|
The previous documentation had been very crude so refactor it to make it
cleaner and concise.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
|
|
Prepare v2024.01-rc6
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Recently, the U-Boot installation process has changed significantly.
This should be depicted in documentation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
|
|
Align the documentation with the v0.9 spec.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
If one defines HUSH_MODERN_PARSER, it is then possible to use modern parser with:
=> cli get
old
=> cli set modern
=> cli get
modern
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
This command can be used to print the current parser with 'cli get'.
It can also be used to set the current parser with 'cli set'.
For the moment, only one value is valid for set: old.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
|
|
pkcs11 : change engine uri to use full pk11-URI as defined in:
https://www.rfc-editor.org/rfc/rfc7512.html
Signed-off-by: Ayoub Zaki <ayoub.zaki@embetrix.com>
|
|
Currently the wget command is hard wired to HTTP port 80. This is
inconvenient, as it is extremely easy to start trivial HTTP server
as an unprivileged user using e.g. python http module to serve the
files, but such a server has to run on one of the higher ports:
"
$ python3 -m http.server -d $(pwd) 8080
"
Make it possible to configure HTTP server port the same way it is
possible to configure TFTP server port, using environment variable
'httpdstp' (similar to 'tftpdstp'). Retain port 80 as the default
fallback port. This way, users can start their own trivial server
and conveniently download whatever files they need into U-Boot.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
|
|
The contents of README.sha1 only refer to process around verification
of the pcs440ep board firmware in flash. The device was removed in
commit 242836a893ae ("powerpc: ppc4xx: remove pcs440ep support") in
2015 so this readme isn't really relevant anymore so can be removed.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Prepare v2024.01-rc5
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Both SHA1 and (especially) MD5 are no longer as safe as they once were for
cryptographic use. Replaces examples which use them with examples using
SHA256 instead. This will provide more-secure defaults for users who use
documentation examples as a base for their own use. This is not too
necessary for non-verified-boot scenarios (since someone could just replace
the checksum), but I wanted to be complete.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Mention TI_DM argument can be used to fetch a custom DM binary in the
A72 build instructions for K3 devices.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
|
|
Update to use the new docs.u-boot.org URL for documentation.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Allow showing a menu and automatically booting, with 'bootflow scan'.
This is more convenient than using a script.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
To quote the author:
I wanted to add support for ti,lp5562, and found an old submission
from Doug. While trying to modify that to work in current U-Boot, I
found a problem with the "move label handling to core" patches.
Patch 1 is a prerequisite for the ti,lp5562 driver, which turned out
to be needed by Christian as well.
Patch 2 is an attempt at (quick-)fixing the mentioned "move label
handling to core" problem. The real fix consists of changing remaining
drivers to not bind the same driver to the top node as to the child
nodes, but I can't test those other drivers.
Patch 3 introduces a helper which should allow removing some
boilerplate in most individual drivers, and 4,5 apply that in the gpio
and pwm drivers. Converting remaining drivers is trivial, but left out
for now.
Finally patch 6 is the reworked lp5562 driver. While I've changed it
to match existing DT bindings (with the goal of making it work with
our .dts that is known to work with the linux driver), most of the
logic is unchanged from Doug's original patch, so he is still listed
as author.
Changes in v2: Interchange order of patches 1 and 2, add a few R-bs,
and try to trim down the commit message in patch 2.
|
|
Driver for the TI LP5562 4 channel LED controller. Supports
independent on/off control of all 4 channels. Supports LED_BLINK on 3
independent channels: blue/green/red. The white channel can blink, but
shares the blue channel blink rate.
Heavily based on patch originally from Doug Zobel [1].
I have modified it so it matches the DT bindings in the linux tree,
and also follows the linux driver implementation more closely. This
should address Tom's concerns, and also matches my goal of making the
U-Boot driver work with our existing .dts which is known to work in
linux.
As our boards only have the R,G,B outputs connected, I have not
actually tested how the white channel behaves, but the R,G,B work
exactly as expected.
[1] https://lore.kernel.org/u-boot/1547150757-1561-1-git-send-email-douglas.zobel@climate.com/
Cc: Doug Zobel <douglas.zobel@climate.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
|
|
The first four patches are actual fixes. The last three patches add
support for the apparently popular OrangePi Zero 3 board: multiple
people seem to be champing at the bit, so I'd rather give them
something real instead of people using random trees they found on the
Internet. It's actually mostly the new defconfig file anyway, so the
chances for regressions are very slim.
|
|
The mtd_debug write does not work in this context. The flashcp command does
work, provides both the erase and write functions and with the verbose
option gives good feedback.
Signed-off-by: Stephen Graf <stephen.graf@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
|
|
Prepare v2024.01-rc4
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmVuHrwACgkQFHw5/5Y0
# tyy3Tgv+LB/X0ZR3IHnu1mvQ7kpOFvAjjKr0BUpcEEzsrDZeJnS6sy06m+REez2E
# UmuLeKFj5NUCYXNKtxn2+gVnJt8Tk6ftxhMTiZHmR4Y4NVc5aPtqYmVsv6Q29j0U
# mcg7AGcZTniu9/naNM+ZcDeHzLDAB0whmE9eVfixXVgyitILoLHNdFiQ7W4oR7Kh
# /mBgdMDBS3rqiRi6CuqKUnl4ADX8T3AXaSfi3hqOC5Pj+HPkZSUfyWx31mu9mN1D
# wXTHASZX06Dop25fm/ZSdWk1blBw29WqRiJBdwNatvyC5pqMsotTvAfH2AcHBEYg
# tpoper+WDOBAipt6b6Y1B7q4VPvJ97L9dFCAYqN0nGCe+rkdi+k+cly7M6Ye9xLt
# e7rVUfnKgIMP8jkLcVBYoWkFY5FiJ82O5qjoF5N3dAuHeWacDFsB5TugDTOQvblH
# LWCmcIyU1N9Ma/Ib0rTvNduvpBUYBKXYlD1+rjPZUbTUnfc79mf+ReFpcoW6Kxh+
# bkz81p8P
# =ebIZ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 04 Dec 2023 01:47:24 PM EST
# gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C
# gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate]
|
|
This is a common typo listed in scripts/spelling.txt. Fix it to match the
patchwork status, which is superseded.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
At this point, clang can be used on both 32bit and 64bit targets without
issue. Make note of logic we have that will inform clang of the
architecture to build for.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Fix the devicetree used with sandbox. This is needed because the
default (full) devicetree must be used by all phases of boot, with
sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
Device tree improvents for Paz00 and DM PMIC convertion of recently
merged Tegra boards.
|
|
To quote the author:
"Scmi" command will be re-introduced per Michal's request.
The functionality is the same as I put it in my patch set of adding
SCMI base protocol support, but made some tweak to make UT, "ut dm
scmi_cmd," more flexible and tolerable when enabling/disabling a specific
SCMI protocol for test purpose.
Each commit may have some change history inherited from the preceding
patch series.
Test
====
The patch series was tested on the following platforms:
* sandbox
|
|
This is a help text for scmi command.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Etienne Carriere <etienne.carriere@foss.st.com>
|
|
To quote the author:
This adds a PCI UFS controller support and enables the support on
QEMU RISC-V for testing.
Requiring QEMU v8.2+.
|
|
This enables UFS support for QEMU RISC-V 'virt' machine.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Add generic boot-flow diagrams, and SoC-specific info around build
steps.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Move esm-k3.txt to ti,j721e-esm.yaml in line with the devicetree
documentation in kernel.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Add base documentation for BeagleBone AI-64.
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Move BeaglePlay documentation to beagle as a board vendor and update
references accordingly.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
Add am62x_beagleplay_* defconfig customized for the configuration of
BeaglePlay and drop the config fragments.
This is in preparation for dropping the dependency on ti vendor folder
entirely.
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
When using include directives within a section that is included by non
TI board rst file, k3.rst and other include paths need to be relative to
doc/board/ base.
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
%s/fdtaddr_addr_r/fdt_addr_r/
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Sphinx 6.0 removed the execfile_() function, which we use as part of the
configuration process. They *did* warn us... Just open-code the
functionality as is done in Sphinx itself.
Tested (using SPHINX_CONF, since this code is only executed with an
alternative config file) on various Sphinx versions from 2.5 through 6.0.
Reported-by: Martin Liška <mliska@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Rebased for U-Boot
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Add the README files for the HiSilicon boards to the HTML documentation.
This required a bit of reformatting.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Prepare v2024.01-rc3
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
