aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2019-10-11ata: ahci: Don't forget to clear upper address regs.Oleksandr Rybalko
In 32bits mode upper bits need to be set to 0, otherwise controller will try to DMA into not existing memory and stops with error. Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Oleksandr Rybalko <ray@ddteam.net>
2019-10-11ahci-pci: ASM1061 report wrong class, but support AHCI.Oleksandr Rybalko
Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Oleksandr Rybalko <ray@ddteam.net>
2019-08-26dm: scsi: Scan the actual number of portsPark, Aiden
The scsi_scan_dev() is looping over the number of uc_plat->max_id. The number of actual ports a AHCI controller has can be greater than max_id. Update uc_plat->max_id to make SCSI scan all detected ports. Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-23ata: fsl_ahci: Add sata DM support for Freescale powerpc socsPeng Ma
This patch is to support Freescale sata driver with dts initialized. Also resolved the following problems. ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22scsi: ceva: Clean up the driver codePeng Ma
Distinguish the ecc val by chassis version and move the ecc addr to dts. Add ls1028a soc support. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-18ata: ahci: drop read-only ahci_ioports membersChristian Gmeiner
Also get rid of ahci_setup_port(..). Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2019-05-09ata: ahci: fix memory leakChristian Gmeiner
malloc(..) and memalign(..) are both allocating memory and as a result we leak the memory allocated with malloc(..). Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17sunxi: update SATA driver to always use DM_SCSIAndre Przywara
It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant. It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen. The board defconfigs stay untouched. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-13ata: dwc_ahsata: Add ahci driver model supportSoeren Moch
Disable this support for cm_fx6 to avoid breakage. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-13ata: dwc_ahsata: Fix sector reports for large disksSoeren Moch
Do not report negative sector numbers for disks > 1TB, do not limit sector numbers to 32 bit if CONFIG_SYS_64BIT_LBA is enabled. Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-12sata: sata_mv: add orion-sata compatible stringMichael Walle
The kirkwood devices are compatible with this driver. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12sata: sata_mv: support kirkwood architectureMichael Walle
Fix the worng include and offset macros. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12sata: sata_mv: use correct format specifier in debug()Michael Walle
This fixes a compile error on kirkwood. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12ata: ahci_mvebu: add support for Armada 38xBaruch Siach
With board_ahci_enable() implementation for Armada 38x in place we can now enable 38x support in the ahci_mvebu driver. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-04-12sata: sata_mv: Add DM support to enable CONFIG_BLK usageStefan Roese
This patch adds DM support to the Armada XP SATA driver. This is needed to enable CONFIG_BLK on this platform. It adds the SATA controller as AHCI device, which is strictly speaking not correct, as the controller is not AHCI compatible. But the U-Boot AHCI uclass interface enables the usage of this DM driver and the creation of the corresponding BLK devices. This conversion is done to get rid of the compile warning: Reviewed-by: Chris Packham <judge.packham@gmail.com> ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2018-12-06scsi: ceva: add ls2080a soc supportPeng Ma
Add ahci compatible support for ls2080a soc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Acked-by: Michal Simek <michal.simek@xilinx.com> [YS: add fallthrough comment] Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06scsi: ceva: add ls1088a soc supportPeng Ma
Add ahci compatible support for ls1088a soc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06scsi: ceva: add ls1046a soc supportPeng Ma
Add ahci compatible support for ls1046a soc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-29Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Switch to driver model for eSDHC on Layerscape SoCs including LS1021A, LS1043A, LS1046A, LS1088A, LS2088A. Switch to driver model for SATA on LS1021A and LS1043A. Add support for LS1012AFRWY rev C board. Enable SMMU for LS1043A.
2018-09-27scsi: ceva: add ls1021a soc support.Peng Ma
Add ahci compatible support for ls1021a soc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27scsi: ceva: add ls1043a soc supportPeng Ma
Add ahci compatible support for ls1043a soc. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-25ata: ahci: Don't cap AHCI port count under CONFIG_DM_SCSITuomas Tynkkynen
When using device model this sort of hardcoded limits aren't used or necessary. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-25ata: ahci: Loop over the actual number of ports, not the maximumTuomas Tynkkynen
The loop in ahci_start_ports() is looping over the maximum number of SCSI devices in the system, which can be larger than the amount of ports a particular AHCI controller has. The extra looping isn't directly harmful because the link_port_map bitmap won't have the bit set for a nonexistent port, but it is wasteful. Replace the loop limit with the port count of the AHCI controller instead. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-26scsi: ceva: add ls1012a soc supportYuantian Tang
Make the code structure more general so that more socs can be added easily and also remove speed limitation restriction. Add the ls1012a sata support as well. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (with and without CONFIG_OF_LIVE on zynqmp zcu102) Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-29ata: ahci_mvebu: add scsi supportKen Ma
Mvebu AHCI is AHCI driver which uses SCSI under the hood. This patch adjusts AHCI setup to support SCSI by creating a SCSI device as a child. Since the functions of creating SCSI device need the kconfig option DM_SCSI, so let AHCI_MVEBU select DM_SCSI. Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ata: ahci_mvebu: a8040 a0: remove bad port register offsets workaroundsDavid Sniatkiwicz
This workaround was added for A8040/7040 A0. A8040/7040 A0 is no longer supported so this workaround can be removed. Signed-off-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-29ata: mvebu: move mvebu sata driver to drivers/ata directoryKen Ma
Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this patch moves it to drivers/ata directory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux. New ahci driver's kconfig option is added as AHCI_MVEBU which selects SCSI_AHCI and is based on AHCI. Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-11scsi: ceva: Convert driver to use UCLASS_AHCI instead of SCSIMichal Simek
In v2018 the patch "dm: ahci: Correct uclass private data" (sha1: bfc1c6b4838501d10aa48c0e92eaf70976f4b2dd) was causing an issue for ceva_sata. But this issue is not in v2018.05-rc1 but still converting to UCLASS_AHCI would make more sense. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-27Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTRTom Rini
We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-13dwc_ahci: Fix breakageJean-Jacques Hiblot
The dwc_ahci has been broken for quite some time now. The breakage has been introduced by the series "dm: scsi: Enhance SCSI support for driver model" Use ahci_bind_scsi() and ahci_probe_scsi() to properly bind and probe the driver. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-02-08Move most CONFIG_HAVE_BLOCK_DEVICE to KconfigAdam Ford
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-12-12ata: Migrate CONFIG_MVSATA_IDE to KconfigTuomas Tynkkynen
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_LIBATA to KconfigTuomas Tynkkynen
This symbol enables some library code used by various SATA drivers, so make this a non-user-visible symbol select'ed by the respective drivers, and let moveconfig handle the rest. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen
And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_DWC_AHSATA to KconfigTuomas Tynkkynen
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_FSL_SATA to KconfigTuomas Tynkkynen
Use 'imply' here liberally to avoid the combinatorial explosion of defconfig changes in the PowerPC boards. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SATA_MV to KconfigTuomas Tynkkynen
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SATA_SIL3114 to KconfigTuomas Tynkkynen
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Migrate CONFIG_SATA_SIL to KconfigTuomas Tynkkynen
Use 'imply' here liberally to avoid the combinatorial explosion of defconfig changes in the PowerPC boards. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Drop CONFIG_MX51_PATATuomas Tynkkynen
The last user of this driver went away in August 2015 in commit: b6073fd2115 ("arm: Remove mx51_efikamx, mx51_efikasb boards") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-12ata: Drop CONFIG_SATA_DWCTuomas Tynkkynen
The last user of this driver went away in June 2017, in commit: 98f705c9ce ("powerpc: remove 4xx support") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-11-28ata: Fix ahci wordingMichal Simek
s/achi_/ahci_/g Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-03scsi: ceva: Start port in probeMichal Simek
The patch: "dm: ahci: Unwind the confusing init code" (sha1: 7cf1afce7fa3fe64189020fe14b93f7326dd0758) introduce bug for ceva sata because port didn't start. On the other hand the dwc_ahci.c was fixed correctly. Do the same change for ceva too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
2017-10-04treewide: replace with error() with pr_err()Masahiro Yamada
U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-12dma: import linux/dma-direction.h to consolidate enum dma_data_directionMasahiro Yamada
Import include/linux/dma-direction.h from Linux 4.13-rc7 and delete duplicated definitions of enum dma_data_direction. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-08-17dm: sata: dwc_ahsata: Add support for driver modelSimon Glass
Update this driver to support driver model. This involves implementing the AHCI operations and reusing existing common code. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17dm: sata: Update the AHCI uclass to support operationsSimon Glass
At present the AHCI uclass is just a shell and we still use the global functions to access SATA. Fix this by adding operations to the uclass. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-08-17dm: sata: dw_sata: Set up common versions of operationsSimon Glass
Driver model wants to use the core functions in this file but accesses the uclass-private data in a different way. Move the code into new 'common' functions and set up stubs to call these. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 16:14:17 +0000