aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2024-05-07ata: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2023-11-20Merge tag 'v2024.01-rc3' into nextTom Rini
Prepare v2024.01-rc3
2023-11-10bootstd: Skip over bad device during bootflows scanningTony Dinh
During bootstd scanning for bootdevs, if bootdev_hunt_drv() encounters a device not found error (e.g. ENOENT), let it return a successful status so that bootstd will continue scanning the next devices, not stopping prematurely. Background: During scanning for bootflows, it's possible for bootstd to encounter a faulty device controller. Also when the same u-boot is used for another variant of the same board, some device controller such as SATA might not exist. I've found this issue while converting the Marvell Sheevaplug board to use bootstd. This board has 2 variants, the original Sheevaplug has MMC and USB only, but the later variant comes with USB, MMC, and eSATA ports. We have been using the same u-boot (starting with CONFIG_IDE and later with DM CONFIG_SATA) for both variants. This worked well with the old envs-scripting booting scheme. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-11-07scsi: Forceably finish migration to DM_SCSITom Rini
The migration deadline for moving to DM_SCSI was v2023.04. A further reminder was sent out in August 2023 to the remaining platforms that had not migrated already, and that a few more over the line (or configs deleted). With this commit we: - Rename CONFIG_DM_SCSI to CONFIG_SCSI. - Remove all of the non-DM SCSI code. This includes removing other legacy symbols and code and removes some legacy non-DM AHCI code. - Some platforms that had previously been DM_SCSI=y && SCSI=n are now fully migrated to DM_SCSI as a few corner cases in the code assumed DM_SCSI=y meant SCSI=y. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-10-23bootstd: sata: bootdev scanning for ahci sata with no drive attachedTony Dinh
It's normal to have no SATA drive attached to the controller, so return a successful status when there is no block device found after probing. Note: this patch depends on the previous patch https://patchwork.ozlabs.org/project/uboot/patch/20230917230649.30357-1-mibodhi@gmail.com/ Resend the right patch. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-10-23bootstd: sata: Add bootstd support for ahci sataTony Dinh
Add ahci sata bootdev and corresponding hunting function. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-10-22sunxi: remove CONFIG_SATAPWRAndre Przywara
The CONFIG_SATAPWR Kconfig symbol was used to point to a GPIO that enables the power for a SATA harddisk. In the DT this is described with the target-supply property in the AHCI DT node, pointing to a (GPIO controlled) regulator. Since we need SATA only in U-Boot proper, and use a DM driver for AHCI there, we should use the DT instead of hardcoding this. Add code to the sunxi AHCI driver to check the DT for that regulator and enable it, at probe time. Then drop the current code from board.c, which was doing that job before. This allows us to remove the SATAPWR Kconfig definition and the respective values from the defconfigs. We also select the generic fixed regulator driver, which handles those GPIO controlled regulators. Please note that the OrangePi Plus is a bit special here, it's a H3 board without native SATA, but with a USB-to-SATA bridge. The DT models the SATA power via a VBUS supply regulator, which we don't parse yet in the USB PHY driver. Use the hardcoded CONFIG_USB3_VBUS_PIN for that board meanwhile. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Samuel Holland <samuel@sholland.org>
2023-10-16arm: mvebu: sata_mv: Add bootstd hook to enable sata_bootdevTony Dinh
Add hook in sata_mv probe to enable bootstd bootdev. Note: bootdev_setup_for_sibling_blk() invocation is a noop if bootsd is not enabled for ahci sata yet. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2023-10-10blk: Use a macro for the typical block sizeBin Meng
Avoid using the magic number 512 directly. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-09-24common: Drop linux/printk.h from common headerSimon Glass
This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-09-13scsi: ceva: Use generic_phy_valid() helperJonas Karlman
The documentation for struct phy state that "The content of the structure is managed solely by the PHY API and PHY drivers". Change to use the generic_phy_valid() helper to check if phy is valid. Fixes: f6f5451d469b ("scsi: ceva: Enable PHY and reset support") Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2023-07-28ata: dwc_ahci: Fix support for other platformsJonas Karlman
The dwc_ahci driver use platform specific defines, place the platform specific code behind a ifdef CONFIG_ARCH_OMAP2PLUS to allow build and use of the driver on Rockchip platform. Fixes: 02a4b4297901 ("drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata device") Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
2023-07-21arm64: zynqmp: Switch to amd.com emailsMichal Simek
Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
2023-05-06drivers: use dev_read_addr_ptr when cast to pointerJohan Jonker
The fdt_addr_t and phys_addr_t size have been decoupled. A 32bit CPU can expect 64-bit data from the device tree parser, so use dev_read_addr_ptr instead of the dev_read_addr function in the various files in the drivers directory that cast to a pointer. As we are there also streamline the error response to -EINVAL on return. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-25ata: pci: enable bus masteringChristian Gmeiner
The non DM code path already would enable pci bus mastering. Do the same for the DM code path. Fixes AHCI problems I am seeing on an Intel Apollolake device. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [trini: Use ahci_dev not dev in the calls] Signed-off-by: Tom Rini <trini@konsulko.com>
2023-04-06ata: don't use SYS_SCSI_MAX_SCSI_ID for SATAHeinrich Schuchardt
CONFIG_SYS_SCSI_MAX_SCSI_ID is not defined if CONFIG_SCSI=n. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-06ata: fix requirements for CONFIG_AHCI_PCIHeinrich Schuchardt
Building with CONFIG_AHCI_PCI=y and CONFIG_SCSI_AHCI=n leads to drivers/ata/ahci-pci.o: in function `ahci_pci_probe': drivers/ata/ahci-pci.c:21: undefined reference to `ahci_probe_scsi_pci' Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-23ata: Don't try to use non-existent portsSimon Glass
The controller indicates the number of ports but also has a port map which specifies which ports are actually valid. Make use of this to avoid trying to send commands to an invalid port. This avoids a crash on some controllers. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-11ata: Fix dependency for CONFIG_SATA_SILPali Rohár
sata_sil.c is PCI driver and without CONFIG_PCI is building of U-Boot failing: LD u-boot ld.bfd: drivers/ata/sata_sil.o: in function `sil_exec_cmd': drivers/ata/sata_sil.c:148: undefined reference to `dm_pci_phys_to_bus' ld.bfd: drivers/ata/sata_sil.o: in function `sil_pci_probe': drivers/ata/sata_sil.c:687: undefined reference to `dm_pci_get_bdf' ld.bfd: drivers/ata/sata_sil.c:691: undefined reference to `dm_pci_read_config16' ld.bfd: drivers/ata/sata_sil.c:701: undefined reference to `dm_pci_map_bar' ld.bfd: drivers/ata/sata_sil.c:704: undefined reference to `dm_pci_map_bar' ld.bfd: drivers/ata/sata_sil.c:713: undefined reference to `dm_pci_write_config16' ld.bfd: drivers/ata/sata_sil.c:717: undefined reference to `dm_pci_read_config16' ld.bfd: drivers/ata/sata_sil.o: in function `sil_cmd_identify_device': drivers/ata/sata_sil.c:256: undefined reference to `dm_pci_phys_to_bus' ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd': drivers/ata/sata_sil.c:330: undefined reference to `dm_pci_phys_to_bus' ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd_ext': drivers/ata/sata_sil.c:377: undefined reference to `dm_pci_phys_to_bus' make: *** [Makefile:1778: u-boot] Error 1 Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-12-08ata: ahci-pci: Replace magic constant by macroPali Rohár
Replace 0x1b21 by macro PCI_VENDOR_ID_ASMEDIA with the same value. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-25blk: Rename if_type to uclass_idSimon Glass
Use the word 'uclass' instead of 'if_type' to complete the conversion. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Switch over to using uclass IDsSimon Glass
We currently have an if_type (interface type) and a uclass id. These are closely related and we don't need to have both. Drop the if_type values and use the uclass ones instead. Maintain the existing, subtle, one-way conversion between UCLASS_USB and UCLASS_MASS_STORAGE for now, and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Select SPL_LEGACY_BLOCK automaticallySimon Glass
Selecting this option can be handled in the Kconfig option itself, as it is with BLK. Update this an drop the various 'select' clauses. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Rename HAVE_BLOCK_DEVICESimon Glass
This option is fact really related to SPL. For U-Boot proper we always use driver model for block devices, so CONFIG_BLK is enabled if block devices are in use. It is only for SPL that we have two cases: - SPL_BLK is enabled, in which case we use driver model and blk-uclass.c - SPL_BLK is not enabled, in which case (if we need block devices) we must use blk_legacy.c Rename the symbol to SPL_LEGACY_BLOCK to make this clear. This is different enough from BLK and SPL_BLK that there should be no confusion. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16ata: Fix an instance of SPL_SATA_SUPPORTSimon Glass
The _SUPPORT suffix should be dropped. This happened because the rename was applied around the same time as this new option, so did not include renaming the new option. The relevant commits are: f7560376ae sata: Rename SATA_SUPPORT to SATA 73059529b2 ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCI Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Enable CONFIG_BLK for all mediaSimon Glass
Enable this option on all boards which support block devices. Drop the related depencies on BLK since these are not needed anymore. Disable BLOCK_CACHE on M5253DEMO as this causes a build error. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28ata: sata_sil: Remove useless BLK guard in sata_sil.hTom Rini
Now that the driver only supports CONFIG_BLK, remove the useless guard in sata_sil.h. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_FSL_SATA_V2 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_SATA_V2 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: fsl_sata: Remove legacy non-BLK codeTom Rini
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI codeTom Rini
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-03pci: Add mask parameter to dm_pci_map_bar()Andrew Scull
Add a mask parameter to control the lookup of the PCI region from which the mapping can be made. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03pci: Map bars with offset and lengthAndrew Scull
Evolve dm_pci_map_bar() to include an offset and length parameter. These allow a portion of the memory to be mapped and range checks to be applied. Passing both the offset and length as zero results in the previous behaviour and this is used to migrate the previous callers. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-04-11ahci: add PCI bindings for Marvell 88SE6121/45 SATA controllersHajo Noerenberg
Add AHCI PCI bindings for Marvell 88SE6121/45 SATA controllers. The 88SE6121 controller is used, for example, in the Seagate Blackarmor NAS440 or the Iomega ix4-200d NAS. As Pali Rohár explained [1], these controllers do not match the standard AHCI class code and therefore require an explizit PCI binding. The Linux kernel also uses this approach [2]. [1] https://lists.denx.de/pipermail/u-boot/2022-March/479197.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/ahci.c?h=v5.17#n557 Signed-off-by: Hajo Noerenberg <hajo-uboot@noerenberg.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-04-09sata: call device_probe() after scanningAKASHI Takahiro
Every time a sata bus/port is scanned and a new device is detected, we want to call device_probe() as it will give us a chance to run additional post-processings for some purposes. In particular, support for creating partitions on a device will be added. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-02-21Merge tag 'xilinx-for-v2022.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
2022-02-15scsi: ceva: Enable PHY and reset supportMichal Simek
Add phy and reset support for ceva sata IP. Phy and reset are optional properties that's why detect if description is available. If not just continue with operation. This code was tested on Xilinx Kria SOM kv260-revA with sata connector populated. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/eb3adf649be866aab19fc70ecc0fc8921545b1ac.1644226590.git.michal.simek@xilinx.com
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09ahci: Make ahci drivers depend on AHCISimon Glass
At present all ahci drivers depend on AHCI except for DWC_AHCI. But no boards enable that without also enabling AHCI: /tools/moveconfig.py -f ~AHCI DWC_AHCI 0 matches Group them together and sort them in order by Kconfig name (except for AHCI_MVEBU which uses a different naming convention). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: sata_sil: Only support BLKSimon Glass
No boards use this driver without CONFIG_BLK, so clean up the dead code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: Rearrange Kconfig for SATASimon Glass
Move the SATA options inside an 'if SATA' part, so they are grouped. Fix the 'Complient' typo while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: Only support BLKSimon Glass
No boards currently use SATA without BLK: ./tools/moveconfig.py -f SATA ~BLK 0 matches Make SATA depend on BLK to avoid any future confusion. Drop the dead code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: Drop Silicon Image SIL3114 SATA driverSimon Glass
This is not used in U-Boot and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-09scsi: ceva: rename the resource name to match the linux kernel oneMichael Walle
The driver will look for a named resource "ecc-addr", but this isn't the official binding. In fact, the official device tree binding documentation doesn't mention any resource names at all. But it is safe to assume that it's the linux ones we have to use if we want to be compatible with the linux device tree. Thus rename "ecc-addr" to "sata-ecc" and convert all the users in u-boot. While at it, also rename "sata-base" to "ahci" although its not used at all. This change doesn't affect the SATA controller on the ZynqMP. Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-09-16pci: Fix mismerge with v2021.10-rc4Tom Rini
With legacy PCI code removed and thus DM_PCI also removed, a few places did not get correctly updated with the merge to next and thus broke. Remove now extraneous dependencies on DM_PCI. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-13pci: acpi: Drop DM_PCI check from ahciSimon Glass
We don't need these checks anymore since when PCI is enabled, driver model is always used. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-10arm: mvebu : sata_mv should probe all portsTony Dinh
While a board could have multiple SATA ports, some of the ports might not have a disk attached to them. So while probing for disks, sata_mv_probe() should continue probing all ports, and skip one with no disk attached. Tests with: - Seagate Goflex Net (Marvell Kirkwood 88F6281) out-of-tree u-boot. - Zyxel NSA325 (Marvell Kirkwood 88F6282 out-of-tree u-boot. Observation: If a board has 2 or more SATA ports, and there is only one disk attached to one of the ports, sata_mv_probe() does not return a successful probe status. And if only one disk is attached to the 2nd port (i.e. port 1), it is not probed at all. Patch Description: Let sata_mv_probe() continues probing all ports, even if there is error in probing a given port, and then return a successful status if there is at least one port was probed successfully. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-01ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCIPali Rohár
This new option allows to disable ahci-pci driver in SPL. Disabling it is needed when SPL_PCI is not enabled as ahci-pci depends on PCI. This change fixes following compile error when CONFIG_SPL_SATA_SUPPORT is enabled and SPL_PCI is disabled. LD spl/u-boot-spl arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.o: in function `ahci_probe_scsi_pci': drivers/ata/ahci.c:1205: undefined reference to `dm_pci_map_bar' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1215: undefined reference to `dm_pci_read_config16' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1216: undefined reference to `dm_pci_read_config16' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1220: undefined reference to `dm_pci_map_bar' make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1 make: *** [Makefile:1977: spl/u-boot-spl] Error 2 LD spl/u-boot-spl arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci-pci.o: in function `ahci_pci_probe': drivers/ata/ahci-pci.c:21: undefined reference to `ahci_probe_scsi_pci' make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1 make: *** [Makefile:1977: spl/u-boot-spl] Error 2 Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-01ata: ahci-pci: Fix dependency on DM_PCIPali Rohár
File drivers/ata/ahci-pci.c calls function ahci_probe_scsi_pci() which is compiled only when DM_PCI is enabled. So add missing dependency into Kconfig. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 22:29:32 +0000