aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata
AgeCommit message (Collapse)Author
2023-04-25ata: pci: enable bus masteringChristian Gmeiner
The non DM code path already would enable pci bus mastering. Do the same for the DM code path. Fixes AHCI problems I am seeing on an Intel Apollolake device. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [trini: Use ahci_dev not dev in the calls] Signed-off-by: Tom Rini <trini@konsulko.com>
2023-04-06ata: don't use SYS_SCSI_MAX_SCSI_ID for SATAHeinrich Schuchardt
CONFIG_SYS_SCSI_MAX_SCSI_ID is not defined if CONFIG_SCSI=n. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-06ata: fix requirements for CONFIG_AHCI_PCIHeinrich Schuchardt
Building with CONFIG_AHCI_PCI=y and CONFIG_SCSI_AHCI=n leads to drivers/ata/ahci-pci.o: in function `ahci_pci_probe': drivers/ata/ahci-pci.c:21: undefined reference to `ahci_probe_scsi_pci' Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-23ata: Don't try to use non-existent portsSimon Glass
The controller indicates the number of ports but also has a port map which specifies which ports are actually valid. Make use of this to avoid trying to send commands to an invalid port. This avoids a crash on some controllers. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-11ata: Fix dependency for CONFIG_SATA_SILPali Rohár
sata_sil.c is PCI driver and without CONFIG_PCI is building of U-Boot failing: LD u-boot ld.bfd: drivers/ata/sata_sil.o: in function `sil_exec_cmd': drivers/ata/sata_sil.c:148: undefined reference to `dm_pci_phys_to_bus' ld.bfd: drivers/ata/sata_sil.o: in function `sil_pci_probe': drivers/ata/sata_sil.c:687: undefined reference to `dm_pci_get_bdf' ld.bfd: drivers/ata/sata_sil.c:691: undefined reference to `dm_pci_read_config16' ld.bfd: drivers/ata/sata_sil.c:701: undefined reference to `dm_pci_map_bar' ld.bfd: drivers/ata/sata_sil.c:704: undefined reference to `dm_pci_map_bar' ld.bfd: drivers/ata/sata_sil.c:713: undefined reference to `dm_pci_write_config16' ld.bfd: drivers/ata/sata_sil.c:717: undefined reference to `dm_pci_read_config16' ld.bfd: drivers/ata/sata_sil.o: in function `sil_cmd_identify_device': drivers/ata/sata_sil.c:256: undefined reference to `dm_pci_phys_to_bus' ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd': drivers/ata/sata_sil.c:330: undefined reference to `dm_pci_phys_to_bus' ld.bfd: drivers/ata/sata_sil.o: in function `sil_sata_rw_cmd_ext': drivers/ata/sata_sil.c:377: undefined reference to `dm_pci_phys_to_bus' make: *** [Makefile:1778: u-boot] Error 1 Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-12-08ata: ahci-pci: Replace magic constant by macroPali Rohár
Replace 0x1b21 by macro PCI_VENDOR_ID_ASMEDIA with the same value. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-25blk: Rename if_type to uclass_idSimon Glass
Use the word 'uclass' instead of 'if_type' to complete the conversion. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Switch over to using uclass IDsSimon Glass
We currently have an if_type (interface type) and a uclass id. These are closely related and we don't need to have both. Drop the if_type values and use the uclass ones instead. Maintain the existing, subtle, one-way conversion between UCLASS_USB and UCLASS_MASS_STORAGE for now, and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Select SPL_LEGACY_BLOCK automaticallySimon Glass
Selecting this option can be handled in the Kconfig option itself, as it is with BLK. Update this an drop the various 'select' clauses. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Rename HAVE_BLOCK_DEVICESimon Glass
This option is fact really related to SPL. For U-Boot proper we always use driver model for block devices, so CONFIG_BLK is enabled if block devices are in use. It is only for SPL that we have two cases: - SPL_BLK is enabled, in which case we use driver model and blk-uclass.c - SPL_BLK is not enabled, in which case (if we need block devices) we must use blk_legacy.c Rename the symbol to SPL_LEGACY_BLOCK to make this clear. This is different enough from BLK and SPL_BLK that there should be no confusion. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16ata: Fix an instance of SPL_SATA_SUPPORTSimon Glass
The _SUPPORT suffix should be dropped. This happened because the rename was applied around the same time as this new option, so did not include renaming the new option. The relevant commits are: f7560376ae sata: Rename SATA_SUPPORT to SATA 73059529b2 ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCI Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-16blk: Enable CONFIG_BLK for all mediaSimon Glass
Enable this option on all boards which support block devices. Drop the related depencies on BLK since these are not needed anymore. Disable BLOCK_CACHE on M5253DEMO as this causes a build error. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-06-28ata: sata_sil: Remove useless BLK guard in sata_sil.hTom Rini
Now that the driver only supports CONFIG_BLK, remove the useless guard in sata_sil.h. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_FSL_SATA_V2 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_SATA_V2 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: fsl_sata: Remove legacy non-BLK codeTom Rini
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI codeTom Rini
The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-03pci: Add mask parameter to dm_pci_map_bar()Andrew Scull
Add a mask parameter to control the lookup of the PCI region from which the mapping can be made. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03pci: Map bars with offset and lengthAndrew Scull
Evolve dm_pci_map_bar() to include an offset and length parameter. These allow a portion of the memory to be mapped and range checks to be applied. Passing both the offset and length as zero results in the previous behaviour and this is used to migrate the previous callers. Signed-off-by: Andrew Scull <ascull@google.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-04-11ahci: add PCI bindings for Marvell 88SE6121/45 SATA controllersHajo Noerenberg
Add AHCI PCI bindings for Marvell 88SE6121/45 SATA controllers. The 88SE6121 controller is used, for example, in the Seagate Blackarmor NAS440 or the Iomega ix4-200d NAS. As Pali Rohár explained [1], these controllers do not match the standard AHCI class code and therefore require an explizit PCI binding. The Linux kernel also uses this approach [2]. [1] https://lists.denx.de/pipermail/u-boot/2022-March/479197.html [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/ata/ahci.c?h=v5.17#n557 Signed-off-by: Hajo Noerenberg <hajo-uboot@noerenberg.de> Reviewed-by: Pali Rohár <pali@kernel.org>
2022-04-09sata: call device_probe() after scanningAKASHI Takahiro
Every time a sata bus/port is scanned and a new device is detected, we want to call device_probe() as it will give us a chance to run additional post-processings for some purposes. In particular, support for creating partitions on a device will be added. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-02-21Merge tag 'xilinx-for-v2022.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
2022-02-15scsi: ceva: Enable PHY and reset supportMichal Simek
Add phy and reset support for ceva sata IP. Phy and reset are optional properties that's why detect if description is available. If not just continue with operation. This code was tested on Xilinx Kria SOM kv260-revA with sata connector populated. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/eb3adf649be866aab19fc70ecc0fc8921545b1ac.1644226590.git.michal.simek@xilinx.com
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09ahci: Make ahci drivers depend on AHCISimon Glass
At present all ahci drivers depend on AHCI except for DWC_AHCI. But no boards enable that without also enabling AHCI: /tools/moveconfig.py -f ~AHCI DWC_AHCI 0 matches Group them together and sort them in order by Kconfig name (except for AHCI_MVEBU which uses a different naming convention). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: sata_sil: Only support BLKSimon Glass
No boards use this driver without CONFIG_BLK, so clean up the dead code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: Rearrange Kconfig for SATASimon Glass
Move the SATA options inside an 'if SATA' part, so they are grouped. Fix the 'Complient' typo while we are here. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: Only support BLKSimon Glass
No boards currently use SATA without BLK: ./tools/moveconfig.py -f SATA ~BLK 0 matches Make SATA depend on BLK to avoid any future confusion. Drop the dead code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-09sata: Drop Silicon Image SIL3114 SATA driverSimon Glass
This is not used in U-Boot and has not been converted to driver model. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-09scsi: ceva: rename the resource name to match the linux kernel oneMichael Walle
The driver will look for a named resource "ecc-addr", but this isn't the official binding. In fact, the official device tree binding documentation doesn't mention any resource names at all. But it is safe to assume that it's the linux ones we have to use if we want to be compatible with the linux device tree. Thus rename "ecc-addr" to "sata-ecc" and convert all the users in u-boot. While at it, also rename "sata-base" to "ahci" although its not used at all. This change doesn't affect the SATA controller on the ZynqMP. Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-09-16pci: Fix mismerge with v2021.10-rc4Tom Rini
With legacy PCI code removed and thus DM_PCI also removed, a few places did not get correctly updated with the merge to next and thus broke. Remove now extraneous dependencies on DM_PCI. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-16Merge tag 'v2021.10-rc4' into nextTom Rini
Prepare v2021.10-rc4 Signed-off-by: Tom Rini <trini@konsulko.com> # gpg: Signature made Tue 14 Sep 2021 06:58:32 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # board/Arcturus/ucp1020/spl.c # cmd/mvebu/Kconfig # common/Kconfig.boot # common/image-fit.c # configs/UCP1020_defconfig # configs/sifive_unmatched_defconfig # drivers/pci/Kconfig # include/configs/UCP1020.h # include/configs/sifive-unmatched.h # lib/Makefile # scripts/config_whitelist.txt
2021-09-13pci: acpi: Drop DM_PCI check from ahciSimon Glass
We don't need these checks anymore since when PCI is enabled, driver model is always used. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-09-10arm: mvebu : sata_mv should probe all portsTony Dinh
While a board could have multiple SATA ports, some of the ports might not have a disk attached to them. So while probing for disks, sata_mv_probe() should continue probing all ports, and skip one with no disk attached. Tests with: - Seagate Goflex Net (Marvell Kirkwood 88F6281) out-of-tree u-boot. - Zyxel NSA325 (Marvell Kirkwood 88F6282 out-of-tree u-boot. Observation: If a board has 2 or more SATA ports, and there is only one disk attached to one of the ports, sata_mv_probe() does not return a successful probe status. And if only one disk is attached to the 2nd port (i.e. port 1), it is not probed at all. Patch Description: Let sata_mv_probe() continues probing all ports, even if there is error in probing a given port, and then return a successful status if there is at least one port was probed successfully. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-01ata: ahci-pci: Add new option CONFIG_SPL_AHCI_PCIPali Rohár
This new option allows to disable ahci-pci driver in SPL. Disabling it is needed when SPL_PCI is not enabled as ahci-pci depends on PCI. This change fixes following compile error when CONFIG_SPL_SATA_SUPPORT is enabled and SPL_PCI is disabled. LD spl/u-boot-spl arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.o: in function `ahci_probe_scsi_pci': drivers/ata/ahci.c:1205: undefined reference to `dm_pci_map_bar' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1215: undefined reference to `dm_pci_read_config16' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1216: undefined reference to `dm_pci_read_config16' arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci.c:1220: undefined reference to `dm_pci_map_bar' make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1 make: *** [Makefile:1977: spl/u-boot-spl] Error 2 LD spl/u-boot-spl arm-linux-gnueabihf-ld.bfd: drivers/ata/ahci-pci.o: in function `ahci_pci_probe': drivers/ata/ahci-pci.c:21: undefined reference to `ahci_probe_scsi_pci' make[1]: *** [scripts/Makefile.spl:512: spl/u-boot-spl] Error 1 make: *** [Makefile:1977: spl/u-boot-spl] Error 2 Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-01ata: ahci-pci: Fix dependency on DM_PCIPali Rohár
File drivers/ata/ahci-pci.c calls function ahci_probe_scsi_pci() which is compiled only when DM_PCI is enabled. So add missing dependency into Kconfig. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-11arm: mvebu: sata_mv failed to identify HDDs during cold startTony Dinh
During cold start, with some HDDs, mv_sata_identify() does not populate the ID words on the 1st ATA ID command. In fact, the first ATA ID command will only power up the drive, and then the ATA ID command processing is lost in the process. Tests with: - Seagate ST9250320AS 250GB HDD and Seagate ST4000DM004-2CV104 4TB HDD. - Zyxel NSA310S (Kirkwood 88F6702), Marvell Dreamplug (Kirkwood 88F6281), Seagate GoFlex Home (Kirkwood 88F6281), Pogoplug V4 (Kirkwood 88F6192). Observation: - The Seagate ST9250320AS 250GB took about 3 seconds to spin up. - The Seagate ST4000DM004-2CV104 4TB took about 8 seconds to spin up. - mv_sata_identify() did not populate the ID words after the call to mv_ata_exec_ata_cmd_nondma(). - Attempt to insert a long delay of 30 seconds, ie. mdelay(30_000), after the call to ata_wait_register() inside mv_ata_exec_ata_cmd_nondma() did not help with the 4TB drive. The ID words were still empty after that 30s delay. Patch Description: - Added a second ATA ID command in mv_sata_identify(), which will be executed if the 1st ATA ID command did not return with valid ID words. - Use the HDD drive capacity in the ID words as a successful indicator of ATA ID command. - In the scenario where a box is rebooted, the 1st ATA ID command is always successful, so there is no extra time wasted. - In the scenario where a box is cold started, the 1st ATA command is the power up command. The 2nd ATA ID command alleviates the uncertainty of how long we have to wait for the ID words to be populated by the SATA controller. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-08-06pci: sata_sil: Drop DM_PCI checksSimon Glass
We don't need these checks anymore since when PCI is enabled, driver model is always used. Drop them. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-07Merge tag 'dm-pull-6jul21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini
various minor sandbox improvements
2021-07-06ata: ahci-pci: Use scsi_ops to initialize opsMasami Hiramatsu
Without this fix, scsi-scan will cause a synchronous abort when accessing ops->scan. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-06dm: define LOG_CATEGORY for all uclassPatrick Delaunay
Define LOG_CATEGORY for all uclass to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-24ata: ahci: fix ahci_link_up() type mismatch for LTOMarek Behún
When building highbank_defconfig with LTO, the compiler complains about type mismatch of function ahci_link_up(). The third parameter of this function is of type u8 in drivers/ata/ahci.c, but of type int in board/highbank/ahci.c. There is no reason in using u8, and the code using this function actually passes an int variable into the function (so it is implicitly converted to u8). Change the type of this parameter to int in drivers/ata/ahci.c. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-11ata: Make LIBATA means AHCI is enabled mandatory.Tom Rini
The migration deadline for having LIBATA mean that AHCI is also enabled was v2019.07. As that has long since passed, adjust the Kconfig dependencies. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-23ata: ahci: Fix usage on big-endian platformsStefan Roese
This patch adds a few missing virt_to_phys() to use the correct physical address for DMA operations in the common AHCI code. This is done to support the big-endian MIPS Octeon platform. Additionally the code a cleaned up a bit (remove some empty lines) and made a bit better readable. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-23sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS OcteonStefan Roese
This patch enables the usage of the MVEBU AHCI/SATA driver. The only changes necessary to support MIPS Octeon via DT based probing are, to add the compatible DT property and the use of dev_remap_addr() so that the correct mapped address is used in the Octeon case (phys != virt). Please note that this driver supports the usage of the "scsi" command and not the "sata" command, since it does not provide an own "scan" function, which is needed for the "sata" cmd support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-20drivers: ata: ahci: update max id if it is more than available portsSuneel Garapati
After check for maximum between max id and available ports, also check if available port count is less than max id and update. In the case of the CN8030 OcteonTX SoC max_id needs to be reduced to the number of ports found otherwise the following occurs on a scan: GW6404-B> scsi scan scanning bus for devices... Target spinup took 0 ms. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: 64bit ncq ilck stag pm led clo only pmp fbss pio slum part ccc apst Device 0: (0:0) Vendor: ATA Prod.: SanDisk SD8SFAT0 Rev: Z233 Type: Hard Disk Capacity: 61057.3 MB = 59.6 GB (125045424 x 512) "Synchronous Abort" handler, esr 0x96000006 elr: 000000000052f824 lr : 000000000052fa10 (reloc) elr: 000000007fee9824 lr : 000000007fee9a10 x0 : 0000000000000001 x1 : 0000000000000001 x2 : 000000007bea3528 x3 : 000000007bea3580 x4 : 0000000000000200 x5 : 0000000000000000 x6 : 0000000000000002 x7 : 000000007bea3540 x8 : 00000000fffffff8 x9 : 0000000000000008 x10: 00000000000186a0 x11: 000000000000000d x12: 0000000000000006 x13: 000000000001869f x14: 0000000000000007 x15: 00000000ffffffff x16: 000000007ff439a5 x17: 000000007ff5730c x18: 000000007bea9de0 x19: 000000007ff7a580 x20: 000000007bec79f8 x21: 0000000000000000 x22: 000000007bea3580 x23: 0000000000000000 x24: 0000000000000000 x25: 000000007bec7a00 x26: 00000000ffffffc0 x27: 000000007bec79d0 x28: 000000007beb51c0 x29: 000000007bea3480 Code: 91246800 940130c2 12800000 1400004f (b9402ae0) Resetting CPU ... Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-10drivers: ata: Remove mvsata_ide driverTom Rini
The mvsata_ide driver was due for DM conversion by v2019.07. As that has long passed, remove the driver and disable it in the boards which had enabled it. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10ata: DWC_AHSATA depends on BLKTom Rini
The dwc ahsata driver is written such that CONFIG_BLK must be enabled, add this as a dependency in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-19ahci: mediatek: fix undefined reference of dev_errFrank Wunderlich
building with MTK_AHCI enabled results in implicit declaration and undefined reference of dev_err followed by a segfault of gcc drivers/ata/mtk_ahci.c: In function 'mtk_ahci_parse_property': drivers/ata/mtk_ahci.c:65:4: warning: implicit declaration of function 'dev_err' drivers/ata/mtk_ahci.c:65: undefined reference to `dev_err' in function `mtk_ahci_probe': drivers/ata/mtk_ahci.c:92: undefined reference to `dev_err' Segmentation fault fix this by adding the dm/device_compat.h to includes Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 11:42:30 +0000