aboutsummaryrefslogtreecommitdiff
path: root/drivers/ddr
AgeCommit message (Collapse)Author
2021-03-12arm: mvebu: a38x: Remove dead code ARMADA_39XPali Rohár
Config option ARMADA_39X is never set so remove all dead code hidden under ifdef CONFIG_ARMADA_39X blocks. Also remove useless checks for CONFIG_ARMADA_38X define as this macro is always defined for a38x code path. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-12ddr: marvell: axp: fix array types have different bounds warningMarek Behún
The arrays `pbs_dq_mapping`, `div_ratio1to1` and `div_ratio2to1` have different bounds declared in header files where these variables are also defined from the ones declared in source files. This causes the compiler to complain (when building with LTO): ddr3_sdram.c:24:12: warning: type of ‘pbs_dq_mapping’ does not match original declaration [-Wlto-type-mismatch] ddr3_patterns_64bit.h:911:5: note: array types have different bounds ddr3_patterns_64bit.h:911:5: note: ‘pbs_dq_mapping’ was previously declared here ddr3_dfs.c:45:11: warning: type of ‘div_ratio1to1’ does not match original declaration [-Wlto-type-mismatch] ddr3_axp_vars.h:167:4: note: array types have different bounds ddr3_axp_vars.h:167:4: note: ‘div_ratio1to1’ was previously declared here ddr3_dfs.c:46:11: warning: type of ‘div_ratio2to1’ does not match original declaration [-Wlto-type-mismatch] ddr3_axp_vars.h:196:4: note: array types have different bounds ddr3_axp_vars.h:196:4: note: ‘div_ratio2to1’ was previously declared here CI managed to trigger this as an error when compiling with LTO for AXP. Fix this by using values from the header files, which seem to be the correct ones. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-03-12ddr: marvell: axp: align signature of mv_xor_mem_init() with a38xMarek Behún
In arch/arm/mach-mvebu/dram.c we always include axp's xor.h for common XOR definitions, regardless whether we compile for axp or a38x. But the declaration of this function has a different signature in axp's xor.h from the one used in a38x' implementation - one parameter is u64 instead of u32. This can result in wrong argument's being passed to that function on a38x with no one the wiser. I discovered this when building U-Boot for Turris Omnia with LTO. The compiler complains about the different signatures being thrown into the same linking process: axp/xor.h:67:5: warning: type of ‘mv_xor_mem_init’ does not match original declaration [-Wlto-type-mismatch] 67 | int mv_xor_mem_init(u32 chan, u32 start_ptr, u32 block_size, | ^ a38x/xor.c:165:5: note: type mismatch in parameter 3 165 | int mv_xor_mem_init(u32 chan, u32 start_ptr, unsigned long long | ^ a38x/xor.c:165:5: note: type ‘long long unsigned int’ should match type ‘u32’ Fix this by changing the type of the block_size argument in the axp's implementation and header file to the one used in a38x (and upstream mv-ddr-marvell). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-12ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repositoryPali Rohár
This syncs drivers/ddr/marvell/a38x/ with the master branch of repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git up to the commit 7c351731d196 ("Merge pull request #29 from pali/sync-a38x-uboot"). This patch was created by following steps: 1. Replace all a38x files in U-Boot tree by files from upstream github Marvell mv-ddr-marvell repository. 2. Run following command to omit portions not relevant for a38x and ddr3: files=drivers/ddr/marvell/a38x/* sed 's/#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)/#ifdef TRUE/' -i $files unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 -UCONFIG_APN806 \ -UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \ -UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DTRUE $files 3. Manually omit SPDX-License-Identifier changes from this patch as upstream license in upstream github repository contains long license texts and U-Boot is using just SPDX-License-Identifier. After applying this patch, a38x ddr3 code in upstream Marvell github repository and in U-Boot would be fully identical. So in future applying above steps could be used to sync code again. The only change in this patch is removal of dead code and some fixes with include files. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-12ddr: marvell: a38x: Add more space for additional info from SPDSujeet Baranwal
commit 258be123226f8f5cd516b7813fe201fb7d7416e9 upstream. At this moment, only page 0 of SPD is being read but to support smbios, we need to read page 1 also which has more info. In order to do that, we need to allocate more space. Signed-off-by: Sujeet Baranwal <sujeet.baranwal@cavium.com> Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com> Reviewed-by: Sujeet Kumar Baranwal <Sujeet.Baranwal@cavium.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <judge.packham@gmail.com>
2021-03-08arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim
Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
2021-02-26ddr: marvell: a38x: fix comment in conditional macroMarek Behún
The code was processed with unifdef utility to omit portions not relevant to A38x and DDR3. This removes usage of many macros, including A70X0, A80X0 and A3900. It seems that the unifdef utility did not remove the macros from #else comment. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: bump version to 14.0.0Marek Behún
Bump version of a38x DDR3 trianing to version 14.0.0 to reflect the version in the mv-ddr-devel branch of upstream repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. There is a new version numbering system, where after 18.12.0 came 1.0.0, 2.0.0, and so on until 14.0.0. So 14.0.0 is newer than 18.12.0. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: enum mv_ddr_twin_die: change orderheaterC
commit 56db5d1464b44df10a02b99e615ebd6f6a35c428 upstream. @pali suggested this change In commit 6285efb ("mv_ddr: add support for twin-die combined memory device") was added support for twin-die combined memory device and default value for explicitly uninitialized structure members is zero, s also twin_die_combined is initialized to zero. Which means COMBINED value. As prior this commit there was no support for twin-die combined memory device, default value for twin_die_combined should be NOT_COMBINED. This change change order of enum mv_ddr_twin_die to ensure that NOT_COMBINED has value zero. Signed-off-by: heaterC <airyguy@gmx.de> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: import code change from upstreamMarek Behún
commit 2bdd12dd68b1f8e27a03a3443ae49a09a14c18e4 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes code in ddr3_training.c. Import this change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: fix memory cs size functionMoti Buskila
commit c8b301463d508c807a33f7b7eaea98bbda4aa35e upstream. The funtion returnd cs size in byte instead of MB, that cause calculation error since the caller was expected to get u32 and when he got above 4G it refers it as 0. The fix was to get the cs memory size from function as in MB and then multiply it by 1MB. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: import header change from upstreamMarek Behún
commit d653b305d0b3da9727c49124683f1a6d95d5c9a5 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header ddr_topology_def.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: disable WL phase correction stage in case of bus_width=16bitMoti Buskila
commit 20c89a28548cdab11f88d2ec8936344af0686a1e upstream. WL phase correcion stage is failing while using bus_width of 16bit, not to be fix this stage is un-necessary when working with bus_width of 16 bit. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: add support for twin-die combined memory deviceMoti Buskila
commit 6285efb8a118940877522c4c07bd7c64569b4f5f upstream. the twin-die combined memory device should be treatened as X8 device and not as X16 one Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> [ - the default value for twin_die_combined is set to NOT_COMBINED for all boards, as this was default behaviour prior this change ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: add 16Gbit memory devices supportMoti Buskila
commit 994509eb4fe6771d92cd06314c37895098ac48fa upstream. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: allow board specific ODT configurationBaruch Siach
commit 2d3b9437cf38c06c4330e0de07f29476197f5e04 upstream. The ODT enable heuristic based on active chip-selects is not always correct. Some board might use two chip-selects, but have only one ODT line connected. Allow board specific mv_ddr_topology_map to directly set the ODT configuration register value. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Moti Buskila <motib@marvell.com> Reviewed-by: Nadav Haklai <Nadav.Haklai@cavium.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: import header change from upstreamMarek Behún
commit 3908e20c6c520339e9bddb566823ae5e065d5218 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header ddr_topology_def.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: fix memory size calculation using 32bit bus widthMoti Buskila
commit ab9240402a70cc02496683971779e75eff410ab4 upstream. - function mv_ddr_spd_die_capacity_user_get() has a bug, since it insert a user memory enum to it, instead of SPD memory enum (which are different) - fix: remove mv_ddr_spd_die_capacity_user_get() function. - memory size with 64 and 32 bit already calculated correctly at mv_ddr_mem_sz_per_cs_get() function Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Stefan Chulski <Stefan.Chulski@cavium.com> Reviewed-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: fix 32bitMoti Buskila
commit 0b5adedd4ced9b8f528faad1957d4d69e95759ef upstream. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: import header change from upstreamMarek Behún
commit 6c705ebc0d70f67ed7cae83ad1978c3305ef25be upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header mv_ddr_topology.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: add ddr 32bit ECC supportAlex Leibovich
commit 61a8910998d7b553e80f600ebe8147a8b98f0945 upstream. Required changes made for 32bit ddr support. An update is made to the topology map, according to bus_act_mask, set in the dram_port.c Signed-off-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: add ddr32 supportAlex Leibovich
commit 32800667b375ebd1f82120da0f3479b1cf52d96d upstream. Required changes made for 32bit ddr support. An update is made to the topology map, according to bus_act_mask, set in the dram_port.c Signed-off-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Nadav Haklai <Nadav.Haklai@cavium.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: import header change from upstreamMarek Behún
commit a165037ec26f301be75e1fabc263643683e85255 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header ddr_topology_def.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-26ddr: marvell: a38x: fix write leveling suplementary algoMoti Buskila
commit ce62bef8fac559e27245259882e45f19cdc293ad upstream. - fix JIRA A7K8K-5056 - remove TEST_PATTERN write at the load patern stage earlier to WL SUP stage - the WL SUP stage already writes this pattern to the memory, if the pattern exist at the memory then the algorithm will fail, since it think that there are no phase to correct Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
2021-02-24dm: ddr: socfpga: don't assign values that are not usedHeinrich Schuchardt
The values of left_edge[0] and right_edge[0] are overwritten before they are used. Remove the superfluous assignments. Fixes: 285b3cb939a8 ("dm: ddr: socfpga: fix gen5 ddr driver to not use bss") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-21dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIOIgor Opaniuk
Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-23imx: ddr: imx8m: Move selfref_en after DDR scrubYe Li
When doing DDR scrub, the DDR may enter into self refresh if the selfref_en is enabled before DDR scrub. This will cause scrub can't complete that SBRSTAT.scrub_done won't be set. Since the selfref_en can be programmed during the course of normal operation, move it after DDR scrub Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-01-05Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextTom Rini
Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05dm: Use access methods for dev/uclass private dataSimon Glass
Most drivers use these access methods but a few do not. Update them. In some cases the access is not permitted, so mark those with a FIXME tag for the maintainer to check. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Pratyush Yadav <p.yadav@ti.com>
2020-12-13dm: treewide: Rename ..._platdata variables to just ..._platSimon Glass
Try to maintain some consistency between these variables by using _plat as a suffix for them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename ofdata_to_platdata() to of_to_plat()Simon Glass
This name is far too long. Rename it to remove the 'data' bits. This makes it consistent with the platdata->plat rename. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass
We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-10armv8: lx2162a: Add Soc changes to support LX2162AMeenakshi Aggarwal
LX2162 is LX2160 based SoC, it has same die as of LX2160 with different packaging. LX2162A support 64-bit 2.9GT/s DDR4 memory, i2c, micro-click module, microSD card, eMMC support, serial console, qspi nor flash, qsgmii, sgmii, 25g, 40g, 50g network interface, one usb 3.0 and serdes interface to support three PCIe gen3 interface. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Fixed whitespace errors] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-10-22ARM: mvebu: a38x: Fix comment typoNaoki Hayama
%s/occured/occurred/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Reviewed-by: Stefan Roese <sr@denx.de>
2020-10-22common: rename getc() to getchar()Heinrich Schuchardt
The sandbox is built with the SDL2 library with invokes the X11 library which in turn calls getc(). But getc() in glibc is defined as int getc(FILE *) This does not match our definition. int getc(void) The sandbox crashes when called with parameter -l. Rename our library symbol getc() to getchar(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-27imx8m: ddrphy_utils: Improve coding styleFabio Estevam
Currently checkpatch is not happy about this file: total: 14 errors, 2 warnings, 7 checks, 359 lines checked Improve the coding style so that it can now report: total: 0 errors, 0 warnings, 6 checks, 360 lines checked Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-17treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada
The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-14drivers: ddr: imx Workaround for i.MX8M DDRPHY rank to rank issueOliver Chen
Add logic to automatically update umctl2's setting based on phy training CDD value for rank to rank space issue Acked-by: Ye Li <ye.li@nxp.com> Signed-off-by: Oliver Chen <Oliver.Chen@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14drivers: ddr: imx8mp: Add inline ECC feature supportSherry Sun
the DRAM Controller in i.MX8MP will support a feature called "Inline ECC". This is supported for all 3 supported DRAM technologies (LPDDR4, DDR4 and DDR3L). When this feature is enabled by software, the DRAM Controller reserves 12.5% of DRAM capacity for ECC information, and presents only the non-ECC portion (lower 87.5% of the installed capacity of DRAM) to the rest of the SoC. The DRAM memory can be divided into 8 regions so that if a use case only requires ECC protection on a subset of memory, then only that subset of memory need support inline ECC. If this occurs, then there is no performance penalty accessing the non-ECC-protected memory (no need to access ECC for this portion of the memory map). This is all configured with the DRAM Controller. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14driver: ddr: imx: correct the pwrctl setting of selfref_en on imx8mJacky Bai
The 'selfref_en' should be bit'0', so correct the setting to enable the auto self-refresh. Reviewed-by: Jian Li <jian.li@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14driver: ddr: imx: skip ddr_ss_gpr config on imx8mnJacky Bai
There is no DDR_SS_GPR0 exits on i.MX8MN, so skip setting this register on i.MX8MN. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-09mv_ddr: ddr3: Update {min,max}_read_sample calculationChris Packham
Measurements on actual hardware shown that the read ODT is early by 3 clocks. Adjust the calculation to avoid this. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [upstream https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/22] Signed-off-by: Chris Packham <judge.packham@gmail.com> Tested-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2020-07-09mv_ddr: ddr3: Use correct bitmask for read sample delayChris Packham
In the Armada 385 functional spec (MV-S109094-00 Rev. C) the read sample delay fields are 5 bits wide. Use the correct bitmask of 0x1f when extracting the value. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> [upstream https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell/pull/22] Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-06-04ddr: Rework errata A008109, A008378, 009942 workaroundJaiprakash Singh
Move errata A008109, A008378, 009942 workaround implementation from compute_fsl_memctl_config_regs() to fsl_ddr_set_memctl_regs() and add register write after each workaround implementation. Signed-off-by: Jaiprakash Singh <Jaiprakash.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-06-04ddr: fsl: Impl. Erratum A008109Joakim Tjernlund
Impl. erratum as descibed in errata doc. Enable A008109 for T1040 and T1024 Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 13:07:26 +0000