aboutsummaryrefslogtreecommitdiff
path: root/drivers/phy/marvell
AgeCommit message (Collapse)Author
2022-02-17usb: ehci: ehci-marvell: Update compatible string to official DT bindingsPali Rohár
Official DT bindings use compatible string marvell,armada-3700-ehci. Update drivers and DTS files. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-17phy: marvell: a3700: Update compatible string to official DT bindingsPali Rohár
In commit d368e1070514 ("phy: marvell: a3700: Convert to official DT bindings in COMPHY driver") was done update to official DT bindings but compatible string of official DT bindings was not updated. Fix it now. Fixes: d368e1070514 ("phy: marvell: a3700: Convert to official DT bindings in COMPHY driver") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20phy: marvell: Remove unused function comphy_update_map()Pali Rohár
This weak function is not used anymore, so completely remove it. Private struct comphy_map is not used by any board code anymore, so move it into private driver header file comphy_core.h. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-20fdt_support: Add fdt_for_each_node_by_compatible() helper macroMarek Behún
Add macro fdt_for_each_node_by_compatible() to allow iterating over fdt nodes by compatible string. Convert various usages of off = fdt_node_offset_by_compatible(fdt, start, compat); while (off > 0) { code(); off = fdt_node_offset_by_compatible(fdt, off, compat); } and similar, to fdt_for_each_node_by_compatible(off, fdt, start, compat) code(); Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-19phy: marvell: a3700: Convert to official DT bindings in COMPHY driverPali Rohár
Convert A3720 common PHY driver to official DT bindings. This puts us closer to be able to synchronize A3720 device-trees with those from Linux. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Marcin Wojtas <mw@semihalf.com> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-08phy: marvell: a3700: Return correct error code when power up failsPali Rohár
Subroutines in comphy_usb2_power_up() and comphy_sgmii_power_up() functions may fail. In this case, do not continue execution of current function and instead jump to the end. Return value in 'ret' variable is already set. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-08phy: marvell: a3700: Fix configuring polarity invert bitsPali Rohár
phy_txd_inv or phy_rxd_inv needs to be set only in case when appropriate polarity is inverted. Otherwise these bits should be cleared. Same change was included in TF-A project: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/9406 Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-08phy: marvell: a3700: Set TXDCLK_2X_SEL bit during PCIe initializationPali Rohár
Marvell Armada 3700 Functional Specifications, section 52.2 PCIe Link Initialization says that TXDCLK_2X_SEL bit needs to be enabled for PCIe Root Complex mode. Same change was included in TF-A project: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/9408 Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-27Merge tag 'v2021.10-rc5' into nextTom Rini
Prepare v2021.10-rc5
2021-09-27phy: marvell: cp110: Support SATA invert polarityDenis Odintsov
In commit b24bb99d cp110 configuration initially done in u-boot was removed and delegated to atf firmware as smc call. That commit didn't account for later introduced in d13b740c SATA invert polarity support. This patch adds support of passing SATA invert polarity flags to atf firmware during the smc call. Signed-off-by: Denis Odintsov <shiva@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-29phy: marvell: utmi: update utmi config which fixes usb2.0 instabilityGrzegorz Jaszczyk
- Add additional step which enables the Impedance and PLL calibration. - Enable old squelch detector instead of the new analog squelch detector circuit and update host disconnect threshold value. - Update LS TX driver strength coarse and fine adjustment values. Change-Id: Ifa0a585bfb5ecab0bfa033eed6874ff98b16a7df Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: add support for SFI1Igal Liberman
In CP115, comphy4 can be configured into SFI port1 (in addition to SFI0). This patch adds the option described above. In addition, rename all existing SFI/XFI references: COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0 No functional change for exsiting configuration. Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: fix pll initialization for second utmi portGrzegorz Jaszczyk
According to Design Reference Specification the PHY PLL and Calibration register from PHY0 are shared for multi-port PHY. PLL control registers inside other PHY channels are not used. This commit reworks utmi device tree nodes in a way that common PHY PLL registers are moved to main utmi node. Accordingly both child nodes utmi-unit range is reduced and register offsets in utmi_phy.h are updated to this change. This fixes issues in scenarios when only utmi port1 was in use, which resulted with lack of correct pll initialization. Change-Id: Icc520dfa719f43a09493ab31f671efbe88872097 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: allow to initialize up to 6 USB portsGrzegorz Jaszczyk
New products can contain up to 6 usb ports, therefore allow to initialize all relevant UTMI PHYs. Change-Id: I28c36e59fa0e3e338bb3ee0cee2240b923f39785 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com>
2021-04-29phy: marvell: cp110: mark u-boot power-off callsIgal Liberman
It helps ATF to determine who called power off function (U-boot/Linux) and act accordingly Change-Id: Icfc5cbfdba64754496812154272b28c0ff639f0f Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: fix handling of unconnected comphyChristine Gharzuzi
- the default value of comphy pipe selector is set to PCIe (x4) in case of unconnected comphy the default value remains 0x4 which may lead to several issues with comphy initialization. - this patch adds SMC call that powers off the comphy lane in case of unconnected comphy. Change-Id: I196b2916518dd8df3b159ffa85e2989b8e483087 Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: pass sgmii id to firmwareIgal Liberman
Currently, we don't pass id for SGMII 0/1. A bug in comphy selector configuration was found (in comphy firmware), after fixing it, SGMII0/1 have different configuration, so we need to pass the ID the firmware. Change-Id: Idcff4029cc9cf018278e493221b64b33574e0d38 Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: clean up driver after it was moved to atfGrzegorz Jaszczyk
Change-Id: I358792a96c13b54e700c05227cc7a8f6bd584694 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: remove both phy and pipe selector configurationGrzegorz Jaszczyk
Now the comphy configuration is handled in atf, therefore there is no need to configure phy or pipe selector in u-boot, it is configured by atf for each particular pair: lane and mode. Change-Id: I0bebf8d5ff66dbeb6bf9ef90876195938a8eb705 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: let the firmware perform training for XFIGrzegorz Jaszczyk
Replace the XFI training with appropriate SMC call, so the firmware will perform exact initialization. Update Stefan 2021-03-23: Move comphy_smc() function to an earlier place - necessary for the mainline merge. Change-Id: I789b130b05529dc80dadcf66aef407d93595b762 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: let the firmware configure comphy for USBGrzegorz Jaszczyk
Replace the comphy initialization for USB with appropriate SMC call, so the firmware will execute required serdes configuration. Change-Id: I7f773c0dfac70db9dd2653de2cdcfac577e78c4e Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: let the firmware configure comphy for RXAUIGrzegorz Jaszczyk
Replace the comphy initialization for RXAUI with appropriate SMC call, so the firmware will execute required serdes configuration. Change-Id: Iedae0285fb283e05bb263a8b4ce46e8e7451a309 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: remove unused definitionsMarcin Wojtas
Even if comphy types of SATA2/SATA3/SGMII3 and comphy speeds of 1.5G/3G/6.25G were referenced in the driver non configuration (dts) was using it. This patch removes unused definitions. Change-Id: I53ed6f9d3a82b9d18cb4e488bc14d3cf687f9488 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: enable comphy info prints for all devicesIgal Liberman
Change-Id: I3b97253e7102a0868440a9e0200acc1c7919c743 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: add RX training commandIgal Liberman
This patch adds support for running RX training using new command called "rx_training" Usage: rx_training - rx_training <cp id> <comphy id> RX training allows to improve link quality (for SFI mode) by running training sequence between us and the link partner, this allows to reach better link quality then using static configuration. Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-04-29phy: marvell: save comphy_map_data priv structureIgal Liberman
This allows the lower level driver access to comphy map data (required for RX training support, which is introduced in the following patches). Change-Id: Ib7ffdc4b32076c01c3a5d33f59552c9dfc6b12fa Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: fix several minor bugs in comphy_probeIgal Liberman
If fdtdec_get_int can't find speed, set COMPHY_SPEED_INVALID If fdtdec_get_int can't find type, set COMPHY_TYPE_INVALID Move the error print if phy-type is invalid Add continue to the probe loop (in a case of invalid phy) Cosmetic changes Change-Id: I0c61b40bfe685437426fe907942ed338b7845378 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: utmi: update analog parameters according to latest ETPIgal Liberman
Add UTMI analog parameters initialization values according to latest ETP. Change-Id: I5bcca205a3995202a18ff126f371a81f69e205c8 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: initialize only enabled UTMI unitsOmri Itach
UTMI should be initialized only for enabled device tree nodes. This fix overrides current internal configuration array entry with the next DT entry data if error is detected during the current DT entry parsing or the current port is disabled. This way the internal configuration structure will only contain valid ports information obtained from the DT. Change-Id: I9c43c6a5d234e15ae9005d1c9bc983fc1f3544b8 Signed-off-by: Omri Itach <omrii@marvell.com> Signed-off-by: Ken Ma <make@marvell.com>
2021-04-29phy: marvell: add missing speed during info printsIgal Liberman
In get_speed_string() we have an array (speed_strings[]) which includes all possible speed strings. This array size and content must be aligned to the speed defines in comphy_data.h. This patch adds missing 5.125G speed, aligns speed_strings[] and fixes incorrect printing when speed > 5.0G. Change-Id: I9900d23595094be321be0c62fcaa88036324568e Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: rename comphy related definitions to COMPHY_XXIgal Liberman
Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX. Those definition might be confused with MDIO PHY definitions. This patch does the following changes: - PHY_TYPE_XX --> COMPHY_TYPE_XX - PHY_SPEED_XX --> COMPHY_SPEED_XX This improves readability, no functional change. Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: add comphy type PHY_TYPE_USB3jinghua
- For some Marvell SoCs, like armada-3700, there are both USB host and device controller, but on PHY level the configuration is the same. - The new type supports both USB device and USB host - This patch is cherry-picked from u-boot-2015 as-is. Change-Id: I01262027edd8ec23391cff6fb409b3009aedfbb9 Signed-off-by: jinghua <jinghua@marvell.com> Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-13dm: treewide: Rename auto_alloc_size members to be shorterSimon Glass
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29phy: marvell: cp110: update mode parameter for pcie power on callsIgal Liberman
It helps ATF to determine who called power on function (U-boot/Linux). The corresponding ATF code was added in this commit: mvebu: cp110: avoid pcie power on/off sequence when called from Linux https://github.com/ARM-software/arm-trusted-firmware/commit/55df84f974ea37abbb4f93f000f101f70cda5303 Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29phy: marvell: cp110: let the firmware configure comphy for PCIeGrzegorz Jaszczyk
Replace the comphy initialization for PCIe with appropriate SMC call, so the firmware will perform appropriate comphy initialization. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29phy: marvell: cp110: let the firmware configure the comphyGrzegorz Jaszczyk
Replace all comphy initialization with appropriate smc calls. It will result with triggering synchronous exception that is handled by Secure Monitor code in EL3. Then the Secure Monitor code will dispatch each smc call (by parsing the smc function identifier) and triggers appropriate comphy initialization. This patch reworks serdes handling for: SATA, SGMII, HS-SGMII and SFI interfaces. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-09-30phy: marvell: Fix not calling dev_err with a deviceSean Anderson
No need for indirection here. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-09-04phy: marvell: a3700: add sata comphy on lane 2 with invert optionzachary
- This patch moves sata phy powerup from dedicate phy to compphy and adds invert option for sata powerup routine. Change-Id: I1b4e8753e2b2c14c6efa97bca2ffc7d2553d8a90 Signed-off-by: zachary <zhangzg@marvell.com> Signed-off-by: Ken Ma <make@marvell.com> Reviewed-on: http://vgitil04.il.marvell.com:8080/53601 Reviewed-by: Igal Liberman <igall@marvell.com> Tested-by: Igal Liberman <igall@marvell.com> [a.heider: adapt to mainline] Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Create a new header file for 'compat' featuresSimon Glass
At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05dm: core: Require users of devres to include the headerSimon Glass
At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2018-09-19phy: marvell: add SATA comphy RX/TX polarity invert supportRabeeh Khoury
This patch adds support to Armada 7k/8k comphy RX/TX lane swap. The 'phy-invert' DT property defines the inverted signals. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19phy: marvell: Support changing SERDES map in board fileMarek Behún
This adds a weak definition of comphy_update_map to comphy_core, which does nothing. If this function is defined elsewhere, for example in board file, the board file can change some parameters of SERDES configuration. This is needed on Turris Mox, where the SERDES speed on lane 1 has to be set differently when SFP module is connected and when Topaz Switch module is connected. This is a temporary solution. When the comphy driver for armada-3720 will be added to the kernel, the comphy driver in u-boot shall also be updated and this should be done differently then. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14phy: marvell: a3700: Fix compatible string for ehciMarek Behún
The DTS file for armada-37xx uses the string "marvell,armada3700-ehci", but the code searched for "marvell,armada-3700-ehci". Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-14phy: marvell: core: Cosmetic fixesMarek Behún
Move the reg_set* functions into comphy.h as static inline functions. Change return type of get_*_string to const char *. Signed-off-by: Marek Behun <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 11:35:22 +0000