aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
AgeCommit message (Collapse)Author
2014-11-21dm: serial: Move current serial port pointer to global_dataSimon Glass
In general we can't store things in the data section until we have inited SDRAM. Some platforms allow this (e.g. those with SPL) but some don't. Move the pointer to global_data so that it will work on all platforms. Without this fix the serial port will not work prior to relocation with driver model on some platforms. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-11-17Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2014-11-13sh: move CONFIG_{SH2, SH2A, SH3, SH4} to KconfigMasahiro Yamada
This commit moves CONFIG_SH2, CONFIG_SH2A, CONFIG_SH3, CONFIG_SH4 to Kconfig renaming into CONFIG_CPU_SH2, CONFIG_CPU_SH2A, CONFIG_CPU_SH3, CONFIG_CPU_SH4, respectively because arch/sh/Kconfig of Linux uses CONFIG_CPU_SH* convention. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-11-12serial: UniPhier: borrow macros from linux/serial_reg.hMasahiro Yamada
The same bit-field macros are defined in include/linux/serial_reg.h so let's include it and delete duplicated defines. Also, remove unnecessary inclusion of <common.h>. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-11-05Merge git://www.denx.de/git/u-boot-sunxiTom Rini
2014-11-05dm: sunxi: Add support for serial using driver modelSimon Glass
Add a driver for the designware serial UART used on sunxi. This just redirects to the normal ns16550 driver. Add a stdout-path to the device tree so that the correct UART is chosen. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04Merge git://git.denx.de/u-boot-shTom Rini
2014-11-04serial: add prototypes for init functionsJeroen Hofstee
While at it, sort them. Cc: Tom Rini <trini@ti.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-11-04serial: sh: r8a7794: Add support external clockNobuhiro Iwamatsu
The baud rate setting of external clock is enabled. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-11-04serial: sh: Add support R8A7793Nobuhiro Iwamatsu
This adds the preset value to register for R8A7793. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-10-29serial: UniPhier: add static to locally used functionsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29serial: UniPhier: add .pending handlerMasahiro Yamada
Without .pending handler, tstc() function always returns 1. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-26Merge git://git.denx.de/u-boot-dmTom Rini
Fix a trivial conflict over adding <dm.h> Conflicts: arch/arm/cpu/armv7/omap3/board.c Signed-off-by: Tom Rini <trini@ti.com>
2014-10-25serial: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-23serial: remove uniphier_serial_initialize() callMasahiro Yamada
The UniPhier serial driver has been converted to driver model. Let's remove uniphier_serial_initialize() call from the old serial driver framework. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23serial: uniphier: move CONFIG_UNIPHIER_SERIAL to KconfigMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: serial: use Driver Model for UniPhier serial driverMasahiro Yamada
This commit converts UniPhier on-chip serial driver to driver model. Since UniPhier SoCs do not have Device Tree support, some board files should be added under arch/arm/cpu/armv7/uniphier/ph1-*/ directories. (Device Tree support for UniPhier platform is still under way.) Now the base address and master clock frequency are passed from platform data, so CONFIG_SYS_UNIPHIER_SERIAL_BASE* and CONFIG_SYS_UNIPHIER_UART_CLK should be removed. Tested on UniPhier PH1-LD4 ref board. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: add entries to KconfigMasahiro Yamada
Create entries of CONFIG_DM, CONFIG_DM_SERIAL, CONFIG_DM_GPIO and CONFIG_DM_SPI. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: serial: consolidate common code moreMasahiro Yamada
Commit b8893327e9d2 (dm: serial: Put common code into separate functions) consolidated getc() and putc(). This commit does more puts() and tsts(). Also rename locally used functions to _serial_*() for clarification because we have similar functions names here are there in this file. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: serial: remove unnecessary castingMasahiro Yamada
The type (void *) can be directly passed to a function that takes a specific pointer type. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: serial: fix console putcMasahiro Yamada
Commit b8893327e9d2 (dm: serial: Put common code into separate functions) consolidated getc() correctly, but introduced another bug to putc(); serial_stub_putc() passes sdev->priv to serial_putc_dev(), but serial_putc_dev() uses cur_dev instead of the given argument. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23serial: add static directive to local functionsMasahiro Yamada
The functions _serial_putc, _serial_putc_raw, _serial_puts, _serial_getc, _serial_tstc, _serial_setbrg are defined and used locally in each of serial_ns16550.c and serial_s3c24x0.c. Add static directive to them and remove declarations from include/common.h. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: move platform data headers to include/dm/platform_dataMasahiro Yamada
The platform_data definitions are generally referenced from both drivers and board files. That is why header files defining platform_data sturectures are placed in "include" directory, but our top level "include" directory is already too cluttered. Let's collect platform_data definitions under the directory "include/dm/platform_data" like Linux gathers ones around under "include/linux/platform_data". This commit moves two header files: include/serial_mxc.h -> include/dm/platform_data/serial_mxc.h include/serial_pl01x.h -> include/dm/platform_data/serial_pl01x.h Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-23dm: x86: Convert coreboot serial to use driver modelSimon Glass
This makes use of the existing device tree node to use driver model for the serial console. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: serial: ns16550: Add a cast to the I/O operationsSimon Glass
This generates a warning when driver model is enabled, so fix it by adding a cast. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-23dm: omap: serial: Add driver model supportSimon Glass
Add driver model support to this driver, while retaining support for the legacy system. Driver model serial support is enabled with CONFIG_DM_SERIAL as usual. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: serial: Support CONFIG_CONS_INDEX if availableSimon Glass
Try to use this option to select the correct uart for the console. This mimics the behaviour of drivers/serial.c. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: ns16550: Correct the probe logic for platform dataSimon Glass
The probe logic sets up the pointer to the platform data in the device tree decode method. It should be done in the probe() method, and anyway the device tree decode method can't be used when CONFIG_OF_CONTROL is not enabled. Fix these two problems. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: ns16550: Use an address instead of a pointer for the uart baseSimon Glass
It is inconvenient to have to use casts when specifying platform data. Also it is not strictly correct, since we should use map_sysmem() to convert an address to a pointer. Adjust the platform data to use an address. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: serial: ns16550: Correct logic for checking for characterSimon Glass
There is a bug in the logic which checks for an available character. This can cause invalid characters to be received - this was noticed on beaglebone. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-23dm: serial: Reset the watchdog while waiting in getc()Simon Glass
We have moved the busy-wait loop out of drivers and into the uclass. This means that we must reset the watchdog when busy-waiting. Note: some drivers may still have a busy-wait even with driver model, as a transition mechanism. Driver model will tolerate this, and is can be cleaned up when all users of the driver use driver model. An example is ns16550. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
2014-10-22dm: serial: Support driver model in pl01x driverSimon Glass
Add driver model support in this driver, using platform data provided by the board. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2014-10-22dm: serial: Tidy up the pl01x driverSimon Glass
Adjust the driver so that leaf functions take a pointer to the serial port register base. Put all the global configuration in the init function, and use the same settings from then on. This makes it much easier to move to driver model without duplicating the code, since with driver model we use platform data rather than global settings. The driver is compiled with either the CONFIG_PL010_SERIAL or CONFIG_PL011_SERIAL option and this determines the uart type. With driver model this needs to come in from platform data, so create a new CONFIG_PL01X_SERIAL config which brings in the driver, and adjust the driver to support both peripheral variants. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2014-10-22dm: imx: serial: Support driver model in the MXC serial driverSimon Glass
Add driver model support with this driver. Boards which use this driver should define platform data in their board files. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: serial: Put common code into separate functionsSimon Glass
Avoid duplicating the code which deals with getc() and putc(). It is fairly simple, but may expand later. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-22dm: exynos: Move serial to driver modelSimon Glass
Change the Exynos serial driver to work with driver model and switch over all relevant boards to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-10-10serial-uclass: Fix compilation errorHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-07Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2014-10-06stdio: Add force parameter to stdio_deregisterHans de Goede
In some cases we really want to move forward with a deregister, add a force parameter to allow this, and replace the dev with a nulldev in this case. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-05serial: add UniPhier serial driverMasahiro Yamada
The driver for on-chip UART used on Panasonic UniPhier platform. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24cosmetic: replace MIN, MAX with min, maxMasahiro Yamada
The macro MIN, MAX is defined as the aliase of min, max, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-09-24kconfig: add blank Kconfig filesMasahiro Yamada
This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2014-09-23dm: serial: Don't require device tree to configure a consoleSimon Glass
Allow serial_find_console_or_panic() to work without a device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-17Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2014-09-10dm: tegra: Enable driver model for serialSimon Glass
Use driver model for serial ports. Since Tegra now uses driver model for serial, adjust the definition of V_NS16550_CLK so that it is clear that this is only used for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-10dm: serial: Add driver model support for ns16550Simon Glass
Add driver model support so that ns16550 can support operation both with and without driver model. The driver needs a clock frequency so cannot stand alone unfortunately. The clock frequency must be provided by a separate driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-10dm: serial: Collect common baud rate code in ns16550Simon Glass
The same sequence is used in several places, so move it into a function. Note that UART_LCR_BKSE is an alias for UART_LCR_DLAB. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-10dm: serial: Move baud rate calculation to ns16550.cSimon Glass
Move the function that calculates the baud rate divisor into ns16550.c so it can be used by that file. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-10sandbox: serial: Support a coloured consoleSimon Glass
The current sandbox serial driver is a pretty trivial example and does not have the featues that might be needed for other board serial drivers. To help provide a better example, add a text colour property to the device tree for sandbox. This uses platform data, a device tree node, driver private data and a remove() method. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-09-10sandbox: Convert serial driver to use driver modelSimon Glass
Adjust the sandbox serial driver to use the new driver model uclass. The driver works much as before, but within the new framework. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 02:50:47 +0000