aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-05-02pci: Update the highest subordinate bus number for bridge setupMasami Hiramatsu
Update the highest subordinate bus number after probing the devices under the bus for setting up the bridge correctly. The commit 42f3663a3f67 ("pci: Update to use new sequence numbers") removed this but it is required if a PCIe bridge is under the bus. Fixes: 42f3663a3f67 ("pci: Update to use new sequence numbers") Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2021-04-29Merge tag 'dm-pull-29apr21' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-dm buildman environment fix binman FMAP improvements minor test improvements and fixes minor dm improvements
2021-04-29Merge tag 'xilinx-for-v2021.07-rc2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc2 xilinx: - Enable saving variables based on bootmode - Cleanup usb dfu setup and wire it up with usb bootmode - Fix bootscript address logic - Remove GD references (spi, Versal) - Enable capsule update clk: - Small Kconfig fix net: - Fix gmii2rgmii bridge binding usb: - Propagate error (dfu gadget)
2021-04-29spi: zynqmp: Remove gd referenceMichal Simek
gd is not used in this file that's why doesn't make sense to declare it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-29Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flashTom Rini
- mtd: cfi: Fix PPB lock status readout (Marek)
2021-04-29Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Add base support for Marvell OcteonTX2 CN9130 CRB (mostly done by Kostya) - Sync Armada 3k/7k/8k SERDES code with Marvell version (misc Marvell authors) - pci-aardvark: Fix processing PIO transfers (Pali)
2021-04-29dm: core: Add size operations on device tree referencesChen Guanqiao
Add functions to add size of addresses in the device tree using ofnode references. If the size is not set, return FDT_SIZE_T_NONE. Signed-off-by: Chen Guanqiao <chenguanqiao@kuaishou.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29dm: core: Fix uninitialized return value from dm_scan_fdt_nodeSean Anderson
If there are no nodes or if all nodes are disabled, this function would return err without setting it first. Fix this by initializing err to zero. Fixes: 94f7afdf7e ("dm: core: Ignore disabled devices when binding") Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-29dm: core: Add address translation in fdt_get_resourcePatrick Delaunay
Today of_address_to_resource() is called only in ofnode_read_resource() for livetree support and fdt_get_resource() is called when livetree is not supported. The fdt_get_resource() doesn't do the address translation so when it is required, but the address translation is done by ofnode_read_resource() caller, for example in drivers/firmware/scmi/smt.c::scmi_dt_get_smt_buffer() { ... ret = ofnode_read_resource(args.node, 0, &resource); if (ret) return ret; faddr = cpu_to_fdt32(resource.start); paddr = ofnode_translate_address(args.node, &faddr); ... The both behavior should be aligned and the address translation must be called in fdt_get_resource() and removed for each caller. Fixes: a44810123f9e ("dm: core: Add dev_read_resource() to read device resources") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-04-29net: phy: xilinx: Break while loop over ethernet phyMichal Simek
The commit 6c993815bbea ("net: phy: xilinx: Be compatible with live OF tree") change driver behavior to while loop which wasn't correct because the driver was looping over again and again. The reason was that ofnode_valid() is taking 0 as correct value. Fix it by changing while loop to ofnode_for_each_subnode() which is only loop over available nodes. Fixes: 6c993815bbea ("net: phy: xilinx: Be compatible with live OF tree") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-29arm: a37xx: pci: Fix processing PIO transfersPali Rohár
Trying to clear PIO_START register when it is non-zero (which indicates that previous PIO transfer has not finished yet) causes an External Abort with SError 0xbf000002. This bug is currently worked around in TF-A by handling External Aborts in EL3 and ignoring this particular SError. This workaround was also discussed at: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 Implement a proper fix to prevent this External Abort. As it is not possible to cancel a pending PIO transfer, simply do not start a new one if previous has not finished yet. In this case return an error to the caller. In most cases this SError happens when there is no PCIe card connected or when PCIe link is down. The reason is that in these cases a PIO transfer takes about 1.44 seconds. For this reason we also increase the wait timeout in pcie_advk_wait_pio() to 1.5 seconds. If PIO read transfer for PCI_VENDOR_ID register times out, or if it isn't possible to read it yet because previous transfer is not finished, return Completion Retry Status value instead of failing, to give the caller a chance to send a new read request. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-29phy: marvell: utmi: update utmi config which fixes usb2.0 instabilityGrzegorz Jaszczyk
- Add additional step which enables the Impedance and PLL calibration. - Enable old squelch detector instead of the new analog squelch detector circuit and update host disconnect threshold value. - Update LS TX driver strength coarse and fine adjustment values. Change-Id: Ifa0a585bfb5ecab0bfa033eed6874ff98b16a7df Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: add support for SFI1Igal Liberman
In CP115, comphy4 can be configured into SFI port1 (in addition to SFI0). This patch adds the option described above. In addition, rename all existing SFI/XFI references: COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0 No functional change for exsiting configuration. Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: fix pll initialization for second utmi portGrzegorz Jaszczyk
According to Design Reference Specification the PHY PLL and Calibration register from PHY0 are shared for multi-port PHY. PLL control registers inside other PHY channels are not used. This commit reworks utmi device tree nodes in a way that common PHY PLL registers are moved to main utmi node. Accordingly both child nodes utmi-unit range is reduced and register offsets in utmi_phy.h are updated to this change. This fixes issues in scenarios when only utmi port1 was in use, which resulted with lack of correct pll initialization. Change-Id: Icc520dfa719f43a09493ab31f671efbe88872097 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: allow to initialize up to 6 USB portsGrzegorz Jaszczyk
New products can contain up to 6 usb ports, therefore allow to initialize all relevant UTMI PHYs. Change-Id: I28c36e59fa0e3e338bb3ee0cee2240b923f39785 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com>
2021-04-29phy: marvell: cp110: mark u-boot power-off callsIgal Liberman
It helps ATF to determine who called power off function (U-boot/Linux) and act accordingly Change-Id: Icfc5cbfdba64754496812154272b28c0ff639f0f Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: fix handling of unconnected comphyChristine Gharzuzi
- the default value of comphy pipe selector is set to PCIe (x4) in case of unconnected comphy the default value remains 0x4 which may lead to several issues with comphy initialization. - this patch adds SMC call that powers off the comphy lane in case of unconnected comphy. Change-Id: I196b2916518dd8df3b159ffa85e2989b8e483087 Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: pass sgmii id to firmwareIgal Liberman
Currently, we don't pass id for SGMII 0/1. A bug in comphy selector configuration was found (in comphy firmware), after fixing it, SGMII0/1 have different configuration, so we need to pass the ID the firmware. Change-Id: Idcff4029cc9cf018278e493221b64b33574e0d38 Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: clean up driver after it was moved to atfGrzegorz Jaszczyk
Change-Id: I358792a96c13b54e700c05227cc7a8f6bd584694 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: remove both phy and pipe selector configurationGrzegorz Jaszczyk
Now the comphy configuration is handled in atf, therefore there is no need to configure phy or pipe selector in u-boot, it is configured by atf for each particular pair: lane and mode. Change-Id: I0bebf8d5ff66dbeb6bf9ef90876195938a8eb705 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: let the firmware perform training for XFIGrzegorz Jaszczyk
Replace the XFI training with appropriate SMC call, so the firmware will perform exact initialization. Update Stefan 2021-03-23: Move comphy_smc() function to an earlier place - necessary for the mainline merge. Change-Id: I789b130b05529dc80dadcf66aef407d93595b762 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: let the firmware configure comphy for USBGrzegorz Jaszczyk
Replace the comphy initialization for USB with appropriate SMC call, so the firmware will execute required serdes configuration. Change-Id: I7f773c0dfac70db9dd2653de2cdcfac577e78c4e Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: let the firmware configure comphy for RXAUIGrzegorz Jaszczyk
Replace the comphy initialization for RXAUI with appropriate SMC call, so the firmware will execute required serdes configuration. Change-Id: Iedae0285fb283e05bb263a8b4ce46e8e7451a309 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: remove unused definitionsMarcin Wojtas
Even if comphy types of SATA2/SATA3/SGMII3 and comphy speeds of 1.5G/3G/6.25G were referenced in the driver non configuration (dts) was using it. This patch removes unused definitions. Change-Id: I53ed6f9d3a82b9d18cb4e488bc14d3cf687f9488 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: enable comphy info prints for all devicesIgal Liberman
Change-Id: I3b97253e7102a0868440a9e0200acc1c7919c743 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: add RX training commandIgal Liberman
This patch adds support for running RX training using new command called "rx_training" Usage: rx_training - rx_training <cp id> <comphy id> RX training allows to improve link quality (for SFI mode) by running training sequence between us and the link partner, this allows to reach better link quality then using static configuration. Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-04-29phy: marvell: save comphy_map_data priv structureIgal Liberman
This allows the lower level driver access to comphy map data (required for RX training support, which is introduced in the following patches). Change-Id: Ib7ffdc4b32076c01c3a5d33f59552c9dfc6b12fa Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: fix several minor bugs in comphy_probeIgal Liberman
If fdtdec_get_int can't find speed, set COMPHY_SPEED_INVALID If fdtdec_get_int can't find type, set COMPHY_TYPE_INVALID Move the error print if phy-type is invalid Add continue to the probe loop (in a case of invalid phy) Cosmetic changes Change-Id: I0c61b40bfe685437426fe907942ed338b7845378 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: utmi: update analog parameters according to latest ETPIgal Liberman
Add UTMI analog parameters initialization values according to latest ETP. Change-Id: I5bcca205a3995202a18ff126f371a81f69e205c8 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: initialize only enabled UTMI unitsOmri Itach
UTMI should be initialized only for enabled device tree nodes. This fix overrides current internal configuration array entry with the next DT entry data if error is detected during the current DT entry parsing or the current port is disabled. This way the internal configuration structure will only contain valid ports information obtained from the DT. Change-Id: I9c43c6a5d234e15ae9005d1c9bc983fc1f3544b8 Signed-off-by: Omri Itach <omrii@marvell.com> Signed-off-by: Ken Ma <make@marvell.com>
2021-04-29phy: marvell: add missing speed during info printsIgal Liberman
In get_speed_string() we have an array (speed_strings[]) which includes all possible speed strings. This array size and content must be aligned to the speed defines in comphy_data.h. This patch adds missing 5.125G speed, aligns speed_strings[] and fixes incorrect printing when speed > 5.0G. Change-Id: I9900d23595094be321be0c62fcaa88036324568e Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: rename comphy related definitions to COMPHY_XXIgal Liberman
Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX. Those definition might be confused with MDIO PHY definitions. This patch does the following changes: - PHY_TYPE_XX --> COMPHY_TYPE_XX - PHY_SPEED_XX --> COMPHY_SPEED_XX This improves readability, no functional change. Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: add comphy type PHY_TYPE_USB3jinghua
- For some Marvell SoCs, like armada-3700, there are both USB host and device controller, but on PHY level the configuration is the same. - The new type supports both USB device and USB host - This patch is cherry-picked from u-boot-2015 as-is. Change-Id: I01262027edd8ec23391cff6fb409b3009aedfbb9 Signed-off-by: jinghua <jinghua@marvell.com> Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29power: regulator: Add support for regulator-force-boot-offKonstantin Porotchkin
Add support for regulator-force-boot-off DT property. This property can be used by the board/device drivers for turning off regulators on early init stages as pre-requisite for the other components initialization. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-28Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
2021-04-28net: designware: fix PHY reset with DM_MDIONeil Armstrong
The dw_eth_pdata is not accessible from the mdio device, it gets the mdio bus plat leading to random sleeps (-10174464 on Odroid-HC4). This moves the dw_mdio_reset function to a common one taking the ethernet device as parameter and use it from the dw_mdio_reset and dm_mdio variant functions. Fixes: 5160b4567c ("net: designware: add DM_MDIO support") Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-28usb: ehci-mx6: Limit PHY address parsing to !CONFIG_PHYMarek Vasut
For systems which use generic PHY support and implement USB PHY driver, the parsing of PHY properties is unnecessary, disable it. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2021-04-28mtd: cfi: Fix PPB lock status readoutMarek Vasut
According to S26KL512S datasheet [1] and S29GL01GS datasheet [2], the procedure to read out PPB lock bits is to send the PPB Entry, PPB Read, Reset/ASO Exit. Currently, the code does send incorrect PPB Entry, PPB Read and Reset/ASO Exit is completely missing. The PPB Entry sent is implemented by sending flash_unlock_seq() and flash_write_cmd(..., FLASH_CMD_READ_ID). This translates to sequence 0x555:0xaa, 0x2aa:0x55, 0x555:0x90=FLASH_CMD_READ_ID. However, both [1] and [2] specify the last byte of PPB Entry as 0xc0=AMD_CMD_SET_PPB_ENTRY instead of 0x90=FLASH_CMD_READ_ID, that is 0x555:0xaa, 0x2aa:0x55, 0x555:0xc0=AMD_CMD_SET_PPB_ENTRY. Since this does make sense, this patch fixes it and thus also aligns the code in flash_get_size() with flash_real_protect(). The PPB Read returns 00h in case of Protected state and 01h in case of Unprotected state, according to [1] Note 83 and [2] Note 17, so invert the result. Moreover, align the arguments with similar code in flash_real_protect(). Finally, Reset/ASO Exit command should be executed to exit the PPB mode, so add the missing reset. [1] https://www.cypress.com/file/213346/download Document Number: 001-99198 Rev. *M Table 40. Command Definitions, Nonvolatile Sector Protection Command Set Definitions [2] https://www.cypress.com/file/177976/download Document Number: 001-98285 Rev. *R Table 7.1 Command Definitions, Nonvolatile Sector Protection Command Set Definitions Fixes: 03deff433e ("cfi_flash: Read PPB sector protection from device for AMD/Spansion chips") Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-28reset: fix reset_get_by_index_nodev index handlingNeil Armstrong
This fixes an issue getting resets index 1 and 3+, the spurius "> 0" made it return the index 0 or 1, whatever index was passed. The dm_test_reset_base() did not catch it, but the dm_test_reset_base() extension catches it and this fixes the regression. This also fixes a reggression on Amlogic G12A/G12B SoCs, where HDMI output was disable even when Linux was booting. Fixes: ea9dc35aab ("reset: Get the RESET by index without device") Reported-by: B1oHazard <ty3uk@mail.ua> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-28pinctrl: single: fix a never true comparisonDario Binacchi
As reported by Coverity Scan for Das U-Boot, the 'less-than-zero' comparison of an unsigned value is never true. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
2021-04-28pinctrl: single: check function mask to be non-zeroDario Binacchi
Otherwise it can generate a division by zero, which has an undefined behavior. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2021-04-28allow opting out of WATCHDOG_RESET() from timer interruptRasmus Villemoes
Having WATCHDOG_RESET() called automatically from the timer interrupt runs counter to the idea of a watchdog device - if the board runs into an infinite loops with interrupts still enabled, the watchdog will never fire. When using CONFIG_(SPL_)WDT, the watchdog_reset function is a lot more complicated than just poking a few SOC-specific registers - it involves accessing all kinds of global data, and if the interrupt happens at the wrong time (say, in the middle of an WATCHDOG_RESET() call from ordinary code), that can end up corrupting said global data. Allow the board to opt out of calling WATCHDOG_RESET() from the timer interrupt handler by setting CONFIG_SYS_WATCHDOG_FREQ to 0 - as that setting is currently nonsensical (it would be compile-time divide-by-zero), it cannot affect any existing boards. Add documentation for both the existing and extended meaning of CONFIG_SYS_WATCHDOG_FREQ. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-28timer: mpc83xx_timer: fix build with CONFIG_{HW_, }WATCHDOGRasmus Villemoes
The code, which is likely copied from arch/powerpc/lib/interrupts.c, lacks a fallback definition of CONFIG_SYS_WATCHDOG_FREQ and refers to a non-existing timestamp variable - obviously priv->timestamp is meant. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2021-04-28watchdog: use time_after_eq() in watchdog_reset()Rasmus Villemoes
Some boards don't work with the rate-limiting done in the generic watchdog_reset() provided by wdt-uclass. For example, on powerpc, get_timer() ceases working during bootm since interrupts are disabled before the kernel image gets decompressed, and when the decompression takes longer than the watchdog device allows (or enough of the budget that the kernel doesn't get far enough to assume responsibility for petting the watchdog), the result is a non-booting board. As a somewhat hacky workaround (because DT is supposed to describe hardware), allow specifying hw_margin_ms=0 in device tree to effectively disable the ratelimiting and actually ping the watchdog every time watchdog_reset() is called. For that to work, the "has enough time passed" check just needs to be tweaked a little to allow the now==next_reset case as well. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-28clk: renesas: Synchronize Gen2 MSTP teardown tablesMarek Vasut
Synchronize Gen2 MSTP teardown tables with datasheet Rev.2.00 Feb 01, 2016. This corrects the following bits: - added H2 MSTP3[10] SCIF2 - added H2/M2/E2 MSTP7[29] TCON - removed E2 MSTP5[22] Thermal Sensor - removed E2 MSTP10[31,24:22] SRC0, SRC7:9 Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2021-04-28clk: renesas: Only ever access documented bits in clock driver teardownMarek Vasut
The clock driver used a heavy-handed approach where it turned off all available clocks, while also possibly setting bits which are not documented in the R-Car datasheet. Update the tables so that only the bits which are documented are set or cleared when tearing down the clock driver. Note that the only clock left running before booting Linux are now MFIC, INTC-AP, INTC-EX and SCIF2 / SCIF0 on V3x. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
2021-04-28net: sun8i-emac: Fix pinmux setup for Allwinner H5Andre Przywara
Commit eb5a2b671075 ("net: sun8i-emac: Determine pinmux based on SoC, not EMAC type") switched the pinmux setup over to look at CONFIG_MACH_SUN* symbols, to find the appropriate mux value. Unfortunately this patch missed to check for the H5, which is pin-compatible to the H3, but uses a different Kconfig symbol (because it has ARMv8 vs. ARMv7 cores). Replace the pure SUN8I_H3 symbol with the joint SUNXI_H3_H5 one, which is there to cover the peripherals common to both SoCs. Also explicitly list each supported SoC, and have an error message in the fallback case, to avoid those problems in the future. This fixes Ethernet support on all H5 boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Samuel Holland <samuel@sholland.org> # Orange Pi PC2 Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-04-28scsi: Add ata_swap_buf_le16() to support big-endian platformsStefan Roese
Otherwise the output will look like this on MIPS Octeon NIC23: Device 0: (0:0) Vendor: ATA Prod.: aSDnsi klUrt aII Rev: 4X11 Type: Hard Disk Capacity: 457862.8 MB = 447.1 GB (937703088 x 512) instead of this version: Device 0: (0:0) Vendor: TA Prod.: SanDisk Ultra II Rev: X411 Type: Hard Disk Capacity: 457862.8 MB = 447.1 GB (937703088 x 512) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28ata: ahci: Fix usage on big-endian platformsStefan Roese
This patch adds a few missing virt_to_phys() to use the correct physical address for DMA operations in the common AHCI code. This is done to support the big-endian MIPS Octeon platform. Additionally the code a cleaned up a bit (remove some empty lines) and made a bit better readable. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-28sata: ahci_mvebu.c: Enable AHCI/SATA driver for MIPS OcteonStefan Roese
This patch enables the usage of the MVEBU AHCI/SATA driver. The only changes necessary to support MIPS Octeon via DT based probing are, to add the compatible DT property and the use of dev_remap_addr() so that the correct mapped address is used in the Octeon case (phys != virt). Please note that this driver supports the usage of the "scsi" command and not the "sata" command, since it does not provide an own "scan" function, which is needed for the "sata" cmd support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-22 02:08:11 +0000