aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-11-04serial: add prototypes for init functionsJeroen Hofstee
While at it, sort them. Cc: Tom Rini <trini@ti.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-11-04i2c: use __weakJeroen Hofstee
Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-11-04Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini
2014-11-04usb: ehci: rmobile: Collect up address dataNobuhiro Iwamatsu
R8A7791, R8A7793 and R8A7794 have same IP of USB controller. This collect up address data of each SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-11-04usb: ehci: rmobile: Add support R8A7793Nobuhiro Iwamatsu
R8A7793 has same IP of USB controller as R8A7791 and R8A7794 of rmobile ARM SoCs. This adds support R8A7793 to EHCI HCD of rmobile. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
2014-11-04usb: Make pollable int support available outside of ehci-hcd.cHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04usb: ehci: Move cache invalidation to poll_int_queueHans de Goede
Preperation patch to use poll_int_queue outside of ehci-hcd.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04usb: ehci: Move interrupt packet length check to create_int_queueHans de Goede
Preperation patch to use create_int_queue outside of ehci-hcd.c . Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04usb: ehci: Do not disable an already disabled periodic scheduleHans de Goede
When periodic_schedules == 0, the schedule is disabled and there is no reason to disable it again. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-03Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2014-11-03Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2014-10-31twl4030: VMMC2 3.2V enable on MMC initPaul Kocialkowski
This enables the VMMC2 LDO, which powers the MMC2 device. When the device starts from MMC2, this has already been enabled by the BootROM, but when starting from peripheral boot (USB, UART), it is not the case. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-10-29serial: UniPhier: add static to locally used functionsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29serial: UniPhier: add .pending handlerMasahiro Yamada
Without .pending handler, tstc() function always returns 1. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-10-29i2c: designware: Convert driver to multibus/multiadapter frameworkStefan Roese
In preparation for the SoCFPGA support of the designware I2C driver, convert this driver to the common CONFIG_SYS_I2C framework. This patch converts all users of this driver, this is: - ST spearxxx boards - AXS101 (ARC700 platform) I couldn't test this patch on those boards. Only compile tested for all spear boards. And tested on SoCFPGA. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Heiko Schocher <hs@denx.de> Cc: Vipin Kumar <vk.vipin@gmail.com> Cc: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-29i2c: mxs: Add support for I2C 1 on i.MX28Marek Vasut
Add support for I2C bus 1 on the i.MX28. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-29i2c: mxs: Pass the i2c_adapter aroundMarek Vasut
This patch permeates the struct i2c_adapter throughout the driver, so that it can be used to determine which adapter should be used. Note that the driver still supports only one adapter. Note that the patch does shuffle mxs_i2c_set_bus_speed() to the top of the driver, but the function remains unchanged. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-29i2c: mxs: Add basic support for i2c frameworkMarek Vasut
This patch just converts the function prototypes used throughout this driver to match those of the i2c framework. There is so far no functional change. This patch does not do the deeper integration of the framework bits. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-29i2c: mxs: Consolidate hard-coded bus addressMarek Vasut
This patch prepares the MXS I2C driver for the conversion to the new I2C driver framework by pulling out the hard-coded I2C0 address from all the places. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de>
2014-10-28dwc_ahsata: use bitwise operator in sata_port_statusNikita Kiryanov
The logic of the return statement in sata_port_status() calls for a bitwise 'AND' operator, not logical 'AND'. Fix the typo. Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
2014-10-28Merge git://git.denx.de/u-boot-dmTom Rini
2014-10-28e1000: add i211 and unprogrammed i210/i211 supportMarcel Ziswiler
This patch adds support for i211 as well as unprogrammed aka tools only i210/i211 chip support. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-27mmc: s5p: set SD detection pin as inputPrzemyslaw Marczak
The SD Card slot detection pin should be configured as input. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2014-10-27e1000: fix sw fw sync on igb i210/i211Marcel Ziswiler
I finally had a look at the datasheet and spotted an additional register address difference between regular E1000 and i210/i211 chips. This patch fixes this and now successfully works on programmed i210/i211 as well as unprogrammed i211. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-27net/e1000: Fix EEPROM access errorYork Sun
Commit 951860634fdb557bbb58e0f99215391bc0c29779 may have changed the logic unintentially from "if (!(swfw_sync & (fwmask | swmask)))" to "if ((swfw_sync & swmask) && !(swfw_sync & fwmask))". This change breaks some e1000 NIC with a message "ERROR: Unable to read EEPROM!". Signed-off-by: York Sun <yorksun@freescale.com> CC: Marek Vasut <marex@denx.de> CC: Tim Harvey <tharvey@gateworks.com> Acked-by: Marcel Ziswiler <marcel@ziswiler.com>
2014-10-27SPI: mxc_spi: delay initialisation until claim busMarkus Niebel
it is not correct to init for a specific slave in spi_setup_slave. instead buffer the values and delay init until spi_claim_bus. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27SPI: mxc_spi: remove second reset from ECSPI config handlerMarkus Niebel
the second reset prevents other registers to be written. This will prevent to have the correct signal levels for SCLK before writing to the config reg in spi_xchg_single. Tested with GPIO based chipselect and SPI_MODE_3 on i.MX6S Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Acked-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Move the config options to the topMarek Vasut
Just move the configuration options scattered all over the driver to the top of the source file. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Clean up the use of variable dMarek Vasut
The variable d is used in rather questionable way. Rework the code a bit so it's clearer what it does. Also, rename the variable from d to data to make it's name less mysterious. Finally, change it's data type to uint32_t , since it's accessed as a 32bit number. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Zap endless loopMarek Vasut
The driver contained an endless loop when waiting for TX completion, this is a bad idea since if the hardware fails, the loop might spin forever. Add timeout and handle it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Clean up most checkpatch issuesMarek Vasut
This patch just zaps most of the checkpatch cries present in the driver. There is one more left, which will be addressed separately. There is no functional change. This patch also adds a bunch of newlines all around the place, this is to make the code much more readable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Clean up bit definitionsMarek Vasut
Clean up the definitions of bits in the Altera SPI driver, there is no need to put braces around numbers afterall. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27spi: altera: Use struct-based register accessMarek Vasut
Zap the offset-based register access and use the struct-based one as this is the preferred method. No functional change, but there are some line-over-80 problems in the driver, which will be addressed later. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Pavel Machek <pavel@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-10-27Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxTom Rini
2014-10-27PowerPC: drop some 74xx_7xx boards and related codeWolfgang Denk
The file board/Marvell/include/mv_gen_reg.h is incompatible with the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL" clause). As this cannot be fixed, we remove the file and all code that depends on it. Fortunately this only affects some very old boards that have long reached EOL: CPCI750 DB64360 DB64460 p3m750 p3m7448 Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Stefan Roese <sr@denx.de> Cc: Roger Meier <r.meier@siemens.com>
2014-10-27Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini
2014-10-27Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini
2014-10-26Merge http://git.denx.de/u-boot-sunxiTom Rini
2014-10-26Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
2014-10-26Merge git://git.denx.de/u-boot-dmTom Rini
Fix a trivial conflict over adding <dm.h> Conflicts: arch/arm/cpu/armv7/omap3/board.c Signed-off-by: Tom Rini <trini@ti.com>
2014-10-25i2c: designware: add an implement i2c protosJeroen Hofstee
Include the i2c header and change the non confirming functions to do so. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Heiko Schocher <hs@denx.de> [trini: Fix i2c_get_bus_num prototype] Signed-off-by: Tom Rini <trini@ti.com>
2014-10-25net: davince: add missing includeJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25mmc: bcm2835_sdhci: add missing includeJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25video: ipu: prevent warnings with W=1Jeroen Hofstee
- make local functions static - remove unused is_interlaced function Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25tegra: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25serial: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25sdhci: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25omap_gpmc: fix warnigs with W=1Jeroen Hofstee
- make omap_spl_dev_ready static - make omap_reverse_list static, move to under CONFIG_NAND_OMAP_ELM Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Signed-off-by: Tom Rini <trini@ti.com>
2014-10-25net: fec_mxc: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2014-10-25gpio: make local functions staticJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 06:05:29 +0000