aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-03fs: fs-loader: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi-mem: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03mtd: spi-nor: Tidy up error handling / debug codeSimon Glass
The -ENODEV error value in spi_nor_read_id() is incorrect since there clearly is a device - it just cannot be supported. Use -ENOMEDIUM instead which has the virtue of being less common. Fix the return value in spi_nor_scan(). Also there are a few printf() statements which should be debug() since they bloat the code with unused strings at present. Fix those while here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-03spi: Allow separate control of SPI_FLASH_TINY for SPL/TPLSimon Glass
In some cases SPL needs to be able to erase but TPL just needs to read. Allow these to have separate settings for SPI_FLASH_TINY. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-01dm: sysreset: wait after reset messageHeinrich Schuchardt
In our Python tests we expect to see the word "resetting". It may be truncated if we reset before the serial console buffer is transferred. Wait for 100 ms between the "resetting ..." message and the actual reset like we do when powering off. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-29Merge tag 'dm-pull-28jul20' of git://git.denx.de/u-boot-dmTom Rini
Use binman instead of one of the Rockchip build scripts Refactor to allow any arch to create SPI-flash images New button uclass
2020-07-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-stmTom Rini
- fix SPL boot issue due to early dbgmcu_init() call - fix SPL boot issue due to dcache memory region configuration - add support of CONFIG_ENV_IS_IN_MMC - add specific SD/eMMC partition for U-Boot enviromnent - enable env in SPL - use "env info -q" to remove log during boot - remove env location override for dh_stm32mp1 - update management of misc_read - check result of find_mmc_device in stm32prog - use regulator_set_enable_if_allowed for disabling vdd supply in usbphyc - enable CMD_ADTIMG flag to handle Android images - device tree alignment with Linux Kernel v5.8-rc1 - remove hnp-srp-disable for usbotg on dk1 - add reset support to uart nodes on stm32mp15x - use correct weak function name spl_board_prepare_for_linux - use cd-gpios for ST and DHSOM boards - add seeed studio odyssey-stm32mp157c board support - move ethernet PHY into SoM DT - add DHSOM based DRC02 board support
2020-07-29drivers: tee: broadcom: add optee based bnxt fw load driverVikas Gupta
Add optee based bnxt fw load driver. bnxt is Broadcom NetXtreme controller Ethernet card. This driver is used to load bnxt firmware binary using OpTEE. Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29drivers: gpio: add broadcom iproc gpio driver supportRayagonda Kokatanur
Add gpio driver support for Broadcom iproc-based socs. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-29video: add nexell video driver (display/video driver)Stefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - nexell_display.c: Changed to DM, CONFIG_FB_ADDR can not be used anymore because framebuffer is allocated by video_reserve() in video-uclass.c. Therefore code changed appropriately. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (soc: dpc, makefile)Stefan Bosch
Low level functions for DPC (Display Controller) and Makefile for all nexell video low level functions. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (soc: lvds, hdmi)Stefan Bosch
Low level functions for LVDS and HDMI display interfaces. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (soc: mlc, mipi)Stefan Bosch
Low level functions for MLC (Multi Layer Control) and MIPI (Mobile Industry Processor Interface). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29video: add nexell video driver (soc: displaytop)Stefan Bosch
Low level functions for DisplayTop (Display Topology). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29pinctrl: add nexell driverStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - livetree API (dev_read_...) is used instead of fdt one (fdt...). - doc/device-tree-bindings/pinctrl/nexell,s5pxx18-pinctrl.txt added. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29mmc: add nexell driverStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - driver changed to DM. - pinctrl-driver/dt is used now instead of configuring the mmc I/O-pins in the mmc-driver. - nexell_dwmmc_ofdata_to_platdata() reworked, i.e. valid default values are used now (where possible) and the appropriate if-blocks have been removed. - new dt-property "mmcboost" is used now instead of "CONFIG_BOOST_MMC" which was not defined anywhere. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29i2c: add nexell driverStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29gpio: add nexell driverStefan Bosch
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
2020-07-29msm_gpio: Add support for Qualcomm IPQ40xxRobert Marko
Snapdragon SoCs and IPQ40xx use common TLMM IP, so existing driver supports IPQ40xx as well. So lets simply add a compatible for IPQ40xx. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-07-29msm_serial: Read bit rate register value from DTRobert Marko
IPQ40xx and currently supported Snapdragon boards don't use the same one so enable reading it from DT, if no DT property is found default value is the same as the previous define. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
2020-07-29pinctrl: mediatek: add PUPD/R0/R1 support for MT7623David Woodhouse
The pins for the MMC controller weren't being set up correctly because the pinctrl driver only sets the GPIO pullup/pulldown config and doesn't handle the special cases with PUPD/R0/R1 control. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Tested-by: Frank Wunderlich <frank-w@public-files.de>
2020-07-28eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driverMarkLee
The sgmii mode init flow is almost the same for all mediatek SoC, the only difference is the register offset(SGMSYS_GEN2_SPEED) is 0x2028 in the old chip(mt7622) but changed to 0x128 for the newer chip(mt7629 and the following chips). Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com>
2020-07-28dm: button: add a driver for button driven by gpioPhilippe Reynes
Add a simple driver which allows use of buttons attached to GPIOs. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28dm: button: add an uclass for buttonPhilippe Reynes
Add a new uclass for button that implements two functions: - button_get_by_label - button_get_status Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-07-28drivers: avoid using aliases on drivers when OF_PLATDATA is enabledWalter Lozano
After latest improvements on OF_PLATDATA struct names are generated based on driver name instead of compatible strings. With this in mind, using aliases in drivers are not longer needed. This patch removes code that tried to handle these kind of aliases to improve readability. Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-28Convert CONFIG_DRIVER_TI_EMAC_USE_RMII to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DRIVER_TI_EMAC_USE_RMII Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-28phy: usbphyc: use regulator_set_enable_if_allowed for disabling vdd supplyPatrick Delaunay
Use regulator_set_enable_if_allowed() api instead of regulator_set_enable() while disabling vdd supply. This way the driver doesn't see an error when disabling an always-on regulator. This patch is needed since the commit f93fab312615 ("Revert 'power: regulator: Return success on attempt to disable an always-on regulator'") and use the API introduced by commit cc4a224af226 ("power: regulator: Introduce regulator_set_enable_if_allowed api"). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-07-27Merge tag 'u-boot-amlogic-20200727' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Handle errors in Meson serial driver - Enable HDMI, keyboard and ADC for Odroid-C2
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Bug fixes and updates on ls2088a,ls1028a, ls1046a, ls1043a, ls1012a - lx2-watchdog support - layerscape: pci-endpoint support, spin table relocation fixes and cleanups - fsl-crypto: RNG support and bug fixes
2020-07-27Merge tag 'dm-pull-20jul20-take2a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for FIT new UCLASS_SOC patman switch 'test' command minor fdt fixes patman usability improvements
2020-07-27serial: meson: handle RX errorsNeil Armstrong
This checks and handles RX errors on the Amlogic UART controller after experiencing errors on the Khadas VIM3 & VIM3L when UART AO A lines are not connected. When the RX line is not connected, the first byte is erroneous and breaks the U-Boot autoboot, breaking automatic boot. This checks and drops any erroneous RX byte on pending and getc callbacks to avoid returning true to pending when an error byte is in the FIFO. Fixes: bfcef28ae4 ("arm: add initial support for Amlogic Meson and ODROID-C2") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Guillaume La Roque <glaroque@baylibre.com>
2020-07-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- R8A774A1 / Beacon EmbeddedWorks RZG2M Dev Kit support
2020-07-27Watchdog: introduce ARM SBSA watchdog driverZhao Qiang
According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. More details about the hardware specification of this device: ARM DEN0029B - Server Base System Architecture (SBSA) This driver can operate ARM SBSA Generic Watchdog as a single stage In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci: layerscape: Add specific config entry for RC and EP mode driverHou Zhiqiang
Add Root Complex and Endpoint mode specific config entries, such that it's feasible to enable the RC and/or EP mode driver indepently. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci_ep: layerscape: Add the PCIe EP mode support for lx2160a-v2Xiaowei Bao
Add the PCIe EP mode support for lx2160a-v2 platform. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci: layerscape: Modify the ls_pcie_dump_atu functionXiaowei Bao
Modify the ls_pcie_dump_atu function, make it can print the INBOUND windows registers. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci_ep: layerscape: Add the SRIOV VFs of PF supportXiaowei Bao
Add the INBOUND configuration for VFs of PF. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci_ep: layerscape: Add Support for ls2085a and ls2080a EP modeXiaowei Bao
Due to the ls2085a and ls2080a use different way to set the BAR size, so add the BAR size init code here. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci_ep: layerscape: Add the workaround for errata A-009460Xiaowei Bao
The VF_BARn_REG register's Prefetchable and Type bit fields are overwritten by a write to VF's BAR Mask register. workaround: Before writing to the VF_BARn_MASK_REG register, write 0b to the PCIE_MISC_CONTROL_1_OFF register. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pcie_ep: layerscape: Add the multiple function supportXiaowei Bao
Add the multiple function support for Layerscape platform, some PEXs of Layerscaple platform have more than one PF. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci_ep: Add the init functionXiaowei Bao
Some EP deivces need to initialize before RC scan it, e.g. NXP layerscape platform, so add the init function in pci_ep uclass. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27pci: layerscape: Split the EP and RC driverXiaowei Bao
Split the RC and EP driver, and reimplement the EP driver base on the EP framework. Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27i2c: mxc: move i2c_early_init_f to common functionBiwen Li
Move i2c_early_init_f to common function to initialize baudrate of i2c Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: add RNG supportMichael Walle
Register the random number generator with the rng subsystem in u-boot. This way it can be used by EFI as well as for the 'rng' command. Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: instantiate the RNG with prediciton resistanceMichael Walle
If it is already instantiated tear it down first and then reinstanciate it again with prediction resistance. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: don't regenerate secure keysMichael Walle
The secure keys (TDKEK, JDKEK, TDSK) can only be generated once after a POR. Otherwise the RNG4 will throw an error. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: support newer SEC modulesMichael Walle
Since Era 10, the version registers changed. Add the version registers and use them on newer modules. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: export caam_get_era()Michael Walle
We need the era in other modules, too. For example, to get the RNG version. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: make SEC%u status line consistentMichael Walle
Align the status line with all the other output in U-Boot. Before the change: DDR 3.9 GiB (DDR3, 32-bit, CL=11, ECC on) SEC0: RNG instantiated WDT: Started with servicing (60s timeout) After the change: DDR 3.9 GiB (DDR3, 32-bit, CL=11, ECC on) SEC0: RNG instantiated WDT: Started with servicing (60s timeout) Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-07-27crypto/fsl: unused value in caam_hash_update()Heinrich Schuchardt
The value 0 assigned to final is overwritten before ever being used. Remove the assignment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 00:36:15 +0000