aboutsummaryrefslogtreecommitdiff
path: root/dts/upstream
AgeCommit message (Collapse)Author
2024-07-20Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstreamHEADmasterTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/
2024-07-17arm64: dts: rockchip: add PCIe3 support on rk3588-jaguarHeiko Stuebner
The Jaguar SBC provides an M.2 slot connected to the pcie3 controller. In contrast to a number of other boards the pcie-refclk is gpio-controlled, so the necessary clock and is added to the list of pcie3 clocks. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240423074956.2622318-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 0ec7e1096332bc2b9bc881c21cfd234058f747b3 ] (cherry picked from commit 76a89655ae740dddb57187b5b52071ed99187452) Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-07-04Merge patch series "xtensa: Enable qemu-xtensa board"Tom Rini
Jiaxun Yang <jiaxun.yang@flygoat.com> says: Hi all, This series enabled qemu-xtensa board. For dc232b CPU it needs to be built with toolchain[1]. This is a side product of me investigating architectures physical address != virtual address in U-Boot. Now we can get it covered under CI and regular tests. VirtIO devices are not working as expected, due to U-Boot's assumption on VA == PA everywhere, I'm going to get this fixed later. My Xtensa knowledge is pretty limited, Xtensa people please feel free to point out if I got anything wrong. Thanks [1]: https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc232b-elf.tar.gz
2024-07-04dts/upsteam: Add Makefile for xtensaJiaxun Yang
It is required to get it xtensa OF_UPSTREAM work. Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
2024-06-14arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-HaikouHeiko Stuebner
Apart from the host-only usb3 controller (host2) the rk3588 also provides two dual-role controllers. On the Tiger-Haikou combination these are connected to the lower usb3-host port in host-only mode and the micro-usb3 port for dual-role operation. Add the necessary controllers, phys to the Tiger-Haikou board and enable the usb-id extcon. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422163951.2604273-4-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: d7b83921d098bd76623381f75f5cd2296f1315cc ] (cherry picked from commit 193d3b2a0a98f2dcd8c43bcbf8a766098a9fa75d)
2024-06-14arm64: dts: rockchip: add usb-id extcon on rk3588 tigerHeiko Stuebner
The Q7 standard specifies a usb-id pin on the connector to distiuish between host and device mode. Model this via the usb-id extcon binding. While the pin is part of the Q7 standard, so part of the module, the extcon stays disabled in the som dtsi and will only be enabled in a baseboard using it. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422163951.2604273-3-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: eabb53f5dacfd643b5255f35bad30b8f914decdc ] (cherry picked from commit 4843cec4092318ef7feb0999b0d34ef817465b33)
2024-06-14arm64: dts: rockchip: fix comment for upper usb3 portHeiko Stuebner
The comment for the host2_xhci points to the wrong port on the board. The upper usb3 port is the correct one, so fix the comment to prevent confusion. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422163951.2604273-2-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 3482efee1144262dc839792103e6a9e29defecbc ] (cherry picked from commit 56f3031edf22d163f10bc4b631d37a9aaa82d4d4)
2024-06-14arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tigerHeiko Stuebner
The clock-generator of course only produces a 100MHz clock rate, not 1GHz. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240423114635.2637310-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 0eb2a93518fb4728bd1d55fcd3b57fce4797ef1d ] (cherry picked from commit b574cbafae976cf508692088944e45c9764c0048)
2024-06-14arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boardsJing Luo
gpio_pwrctrl2 gets duplicated by both rk806_dvs1_null and rk806_dvs2_null gpio_pwrctrl1 is unset. This typo appears in multiple files. Let's fix them. Note: I haven't had the chance to test them all because I don't own all of these boards (obviously). Please test if it's needed. Signed-off-by: Jing Luo <jing@jing.rocks> Link: https://lore.kernel.org/r/20240420130355.639406-1-jing@jing.rocks Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: d7f2039e5321636069baa77ef2f1e5d22cb69a88 ] (cherry picked from commit cb2b6d1d19ed10fcaec5f5859c08a3355d1c66e0) Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tigerHeiko Stuebner
The association of uart2 to the q7-uart pins is part of the module itself and not the baseboard used. Therefore move the pinctrl over to the tiger dtsi. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240422143356.2596414-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 5adbad5c464a708a87cf5ade1bfe2ca947bb2f82 ] (cherry picked from commit f8314a4fbc00a3d651a7e9b4d9462d10c6c02a12)
2024-06-14arm64: dts: rockchip: enable gpu on rk3588-tigerHeiko Stuebner
Enable the mali gpu node and add the som-specific supply-regulator. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240327112120.1181570-2-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: f5256f8ed4b729c3ab9d9cd7d406313773484b59 ] (cherry picked from commit 27350b241eafea37dc94743cd9c5dd83295faca9)
2024-06-14arm64: dts: rockchip: Add ArmSom Sige7 boardJianfeng Liu
Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16/32GB Memory LPDDR4/LPDDR4x Mali G610MP4 GPU 2× MIPI-CSI Connector 1× MIPI-DSI Connector 1x M.2 Key M (PCIe 3.0 4-lanes) 2x RTL8125 2.5G Ethernet Onboard AP6275P for WIFI6/BT5 32GB/64GB/128GB eMMC MicroSD card slot 1x USB2.0, 1x USB3.0 Type-A, 1x US3.0 Type-C 1x HDMI Output, 1x type-C DP Output Functions work normally: USB2.0 Host USB3.0 Type-A Host M.2 Key M (PCIe 3.0 4-lanes) 2x RTL8125 2.5G Ethernet eMMC MicroSD card More information can be obtained from the following website https://docs.armsom.org/armsom-sige7 Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com> Link: https://lore.kernel.org/r/20240420034300.176920-4-liujianfeng1994@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 81c828a67c78bb03ea75819c417c93c7f3d637b5 ] (cherry picked from commit d427a11542bcf5364a5260280e077f0a2e030dcb) Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: add rk3588 pcie and php IOMMUsNiklas Cassel
The mmu600_pcie is connected with the five PCIe controllers. The mmu600_php is connected with the USB3 controller, the GMAC controllers, and the SATA controllers. See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual). The IOMMUs are disabled by default, as further patches are needed to program the SID/SSIDs in to the IOMMUs. iommu: Default domain type: Translated iommu: DMA domain TLB invalidation policy: strict mode arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf) arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs Additionally, the IOMMU correctly triggers an IOMMU fault when a PCIe device performs a write (since the device hasn't been assigned a SID/SSID): arm-smmu-v3 fc900000.iommu: event 0x02 received: arm-smmu-v3 fc900000.iommu: 0x0000010000000002 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 While this doesn't provide much value as is, having the devices as disabled in the device tree will allow developers to see that the rk3588 actually has IOMMUs on the SoC. Signed-off-by: Niklas Cassel <cassel@kernel.org> Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: cd81d3a0695cc54ad6ac0ef4bbb67a7c8f55d592 ] (cherry picked from commit ea9a34aa0d786cbf4b87f1ba528e69b07219738f) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: add USB3 DRD controllers on rk3588Sebastian Reichel
Add both USB3 dual-role controllers to the RK3588 devicetree. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-8-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 33f393a2a990e16f56931ca708295f31d2b44415 ] (cherry picked from commit c7ed588e14f7dd04a92fb55f12680f94c7b14edf) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: add USBDP phys on rk3588Sebastian Reichel
Add both USB3-DisplayPort PHYs to RK3588 SoC DT. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-7-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: e18e5e8188f2671abf63abe7db5f21555705130f ] (cherry picked from commit 5110caca9865718616cf7093ed4a9a1bc54780db) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: reorder usb2phy properties for rk3588Sebastian Reichel
Reorder common DT properties alphabetically for usb2phy, according to latest DT style rules. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-6-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: abe68e0ca71dddce0e5419e35507cb464d61870d ] (cherry picked from commit f6835a60a8a28ff14ffb3dd80c99ce1c137d06c5) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: fix usb2phy nodename for rk3588Sebastian Reichel
usb2-phy should be named usb2phy according to the DT binding, so let's fix it up accordingly. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240408225109.128953-5-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 4e07a95f7402de092cd71b2cb96c69f85c98f251 ] (cherry picked from commit 5a3e4638492497ae81b9bd4a8627f4727e312ccc) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: Fix ordering of nodes on rk3588sDiederik de Haas
Fix the ordering of the main nodes by sorting them alphabetically and then the ones with a memory address sequentially by that address. Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20240406172821.34173-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: cbb97fe18e299ece1c0074924c630de6a19b320f ] (cherry picked from commit bbf7c16f2f1208b96349f6f6648b69cfaa1a482b) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-14arm64: dts: rockchip: Add rk3588 GPU nodeBoris Brezillon
Add Mali GPU Node to the RK3588 SoC DT including GPU clock operating points Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240326165232.73585-3-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> [ upstream commit: 6fca4edb93d335f29f81e484936f38a5eed6a9b1 ] (cherry picked from commit 3cd15354ea0c8668812bc0b3a4136606c10803e9) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2024-06-04Merge tag 'v2024.07-rc4' into nextTom Rini
Prepare v2024.070-rc4
2024-06-01ARM: dts: renesas: Reserve space in 64bit R-Car DTsMarek Vasut
Reserve 4 kiB of space in 64bit R-Car DTs when those DTs are compiled to permit patching in OpTee-OS /firmware node, /reserved-memory node, possibly also additional /memory@ nodes and RPC node by TFA. This duplicates behavior in arch/arm/dts/Makefile with OF_UPSTREAM. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
2024-05-20Subtree merge tag 'v6.9-dts' of devicetree-rebasing repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/ Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588-rock5b, rk3588-jaguar, # rk3588-tiger (pending patch)
2024-04-01Subtree merge tag 'v6.8-dts' of devicetree-rebasing repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/
2024-03-20Makefile: Add missing OF_UPSTREAM Makefile for 32bit ARMMarek Vasut
Copy dts/upstream/src/arm64/Makefile into dts/upstream/src/arm/Makefile and create a commit. This makes 32bit ARM buildable with OF_UPSTREAM . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Adam Ford <aford173@gmail.com> #am3517-evm Tested-by: Tony Dinh <mibodhi@gmail.com>
2024-02-29dts: Add alternative location for upstream DTB buildsSumit Garg
Allow platform owners to mirror devicetree files from devitree-rebasing directory into dts/upstream/src/$(ARCH) (special case for arm64). Then build then along with any *-u-boot.dtsi file present in arch/$(ARCH)/dts directory. Also add a new Makefile for arm64. This will help easy migration for platforms which currently are compliant with upstream Linux kernel devicetree files. Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2024-02-29Makefile: Add support for DT bindings schema checksSumit Garg
This adds the build infrastructure for checking DT binding schema documents and validating dtb files using the binding schema. Here we use devicetree-rebasing subtree to provide the DT bindings. Along with that adapt dts/upstream/Bindings/Makefile to align with old U-Boot Kbuild infrastructure. Dependency: ----------- The DT schema project must be installed in order to validate the DT schema binding documents and validate DTS files using the DT schema. The DT schema project can be installed with pip:: pip3 install dtschema Note that 'dtschema' installation requires 'swig' and Python development files installed first. On Debian/Ubuntu systems:: apt install swig python3-dev Testing: -------- Build dts files and check using DT binding schema: $ make dtbs_check Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to use for validation. This makes it easier to find and fix errors generated by a specific schema. Note, at this point dtbs_check is an optional build target as there are many warnings generated due to custom DT properties used by many platforms in u-boot. It is expected with these checks that compliance with DT bindings to take place. Once that's done it can be added to CI builds to remain compliant with DT bindings. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
2024-02-29Merge commit '53633a893a06bd5a0c807287d9cc29337806eaf7' as 'dts/upstream'Tom Rini
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:53:14 +0000