aboutsummaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2022-04-01ls1046ardb: Add support for JTAG bootSean Anderson
This adds support for booting entirely from JTAG while using a hard-coded RCW. With these steps, it is not necessary to program a "good" RCW using CodeWarrior. The method here can be performed with any JTAG adapter supported by OpenOCD, including the on-board CMSIS-DAP (albeit very slowly). These steps require LS1046A support in OpenOCD, which was added in [1]. [1] https://sourceforge.net/p/openocd/code/ci/5b70c1f679755677c925b4e6dd2c3d8be4715717/ Signed-off-by: Sean Anderson <sean.anderson@seco.com> [trini: Add reference to doc/board/nxp/ls1046ardb.rst]
2022-04-01arm: smh: Remove smhload commandSean Anderson
This command's functionality is now completely implemented by the standard fs load command. Convert the vexpress64 boot command (which is the only user) and remove the implementation. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2022-04-01vexpress64: Add ARMv8R-64 board variantPeter Hoyes
The ARMv8-R64 architecture introduces optional VMSA (paging based MMU) support in the EL1/0 translation regime, which makes that part mostly compatible to ARMv8-A. Add a new board variant to describe the "BASE-R64" FVP model, which inherits a lot from the existing v8-A FVP support. One major difference is that the memory map in "inverted": DRAM starts at 0x0, MMIO is at 2GB [1]. * Create new TARGET_VEXPRESS64_BASER_FVP target, sharing most of the exising configuration. * Implement inverted memory map in vexpress_aemv8.h * Create vexpress_aemv8r defconfig * Provide an MMU memory map for the BASER_FVP * Update vexpress64 documentation At the moment the boot-wrapper is the only supported secure firmware. As there is no official DT for the board yet, we rely on it being supplied by the boot-wrapper into U-Boot, so use OF_HAS_PRIOR_STAGE, and go with a dummy DT for now. [1] https://developer.arm.com/documentation/100964/1114/Base-Platform/Base---memory/BaseR-Platform-memory-map Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com> [Andre: rebase and add Linux kernel header] Signed-off-by: Andre Przywara <andre.przywara@arm.com> [trini: Add MAINTAINERS entry for Peter]
2022-04-01vexpress64: generalise page table generationAndre Przywara
In preparation for the ARMv8-R64 FVP support, which has DRAM mapped at 0x0, generalise the page table generation, by using symbolic names for the address ranges instead of fixed numbers. We already define the base of the DRAM and MMIO regions, so just use those symbols in the page table description. Rename V2M_BASE to the more speaking V2M_DRAM_BASE on the way. On the VExpress memory map, the address space right after 4GB is of no particular interest to software, as the whole of DRAM is mapped at 32GB instead. The first 2 GB alias to the lower 2GB of DRAM mapped below 4GB, so we skip this part and map some more of the high DRAM, should anyone need it. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01vexpress64: fvp: add distro_boot supportAndre Przywara
So far the FVP model just supports booting through semihosting, so by loading files from the host the model is running on. This allows for quick booting of new kernels (or replacing DTBs), but prevents more featureful boots like using UEFI. Enable the distro_boot feature, and provide a list of possible boot sources that U-Boot should check: - For backwards compatibility we start with semihosting, which gets its commands migrated from CONFIG_BOOTCOMMAND into the distro_boot infrastructure. This is also slightly tweaked to fail graceful in case the required files could not be found. - Next we try to use a user provided script, that could be easily placed into memory using the model command line. - Since we gained virtio support with the enablement of OF_CONTROL, let's check virtio block devices next. This is where UEFI boot can be easily used, for instance by providing a distro installer .iso file through virtio-blk. - Networking is now provided by virtio as well, so enable the default PXE and DHCP boot flows, mostly because we can. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01vexpress64: config header: unify environment definitionAndre Przywara
The definition of the standard environment variables (kernel_addr_r and friends) has been improved lately for the FVP model, but the Juno board is still using some custom scheme. Since we need to extend this to a third board soon, let's unify the definition: - Define the Juno addresses in the same generic way we do for the FVP model, and move the actual variable setting out of the board #ifdef's. - Add the missing addresses for a PXE file and a boot script. - Cleanup some stale comments on the way. As the FVP model doesn't have support for distro_boot quite yet, add a dummy definition for now, to be replaced with the real thing later. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-04-01Convert CONFIG_SYS_MONITOR_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_BASE Note that for how this is re-used on some PowePC platforms, we introduce CONFIG_SPL_SYS_MONITOR_BASE and CONFIG_TPL_SYS_MONITOR_BASE and use the CONFIG_VAL macro to get the correct value at build time, in the code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_NORFLASH_PS32BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NORFLASH_PS32BIT Note that we also attempt to correct the behavior of the code here, which had been testing for "NORFLASH_PS32BIT" which would never be set, instead check for the now set "CONFIG_NORFLASH_PS32BIT", which results in some behavior change. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01at91: Switch to SD_BOOT / CONFIG_NAND_BOOTTom Rini
The values CONFIG_SYS_USE_NANDFLASH and CONFIG_SYS_USE_MMC serve the same purpose as CONFIG_SD_BOOT / CONFIG_NAND_BOOT so migrate to using these switches instead as they're already in Kconfig. Cc: Stelian Pop <stelian@popies.net> Cc: Heiko Schocher <hs@denx.de> Cc: Daniel Gorsulowski <daniel.gorsulowski@esd.eu> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_E300 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_E300 CONFIG_E5500 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01mx53loco: Convert CONFIG_DIALOG_POWER to KconfigTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01exynos: Drop CONFIG_DEVICE_TREE_LISTTom Rini
This value isn't used anywhere, drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_DEEP_SLEEP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DEEP_SLEEP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01M5329EVB, M5373EVB: Remove CONFIG_NANDFLASH_SIZETom Rini
In the case of M5373EVB we always had NANDFLASH_SIZE=16, so just use it directly. In the case of M5329EVB we had not removed the rest of NAND support when saying we didn't have NAND, so instead use that to key off of rather than NANDFLASH_SIZE. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01db-mv784mp-gp: Rename CONFIG_DB_784MP_GP to CONFIG_TARGET_DB_MV784MP_GPTom Rini
The value CONFIG_DB_784MP_GP is only used in the DDR code to refer to CONFIG_TARGET_DB_MV784MP_GP so just use that second value directly. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-01p1_p2_rdb: Remove CONFIG_CPLD_[BO]R_PRELIMTom Rini
These are not referenced in code, drop. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCKS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CLOCKS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CLOCK_SYNTHESIZER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CLOCK_SYNTHESIZER Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01exynos: Drop CONFIG_CLK_*Tom Rini
We only set one of these values ever at this point, so remove dead code. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-04-01Convert CONFIG_SYS_USE_NORFLASH et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_USE_NORFLASH CONFIG_SYS_USE_BOOT_NORFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01global: Remove CONFIG_SYS_USE_DATAFLASH*Tom Rini
There are a handful of variants around CONFIG_SYS_USE_DATAFLASH and none of them now control anything further within their board config.h files, so remove these from CONFIG_SYS_EXTRA_OPTIONS and then remove the empty blocks in the board config.h files. In a few places further clean up related logic. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_LPUART et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LPUART CONFIG_LPUART_32B_REG And note that CONFIG_LPUART_32B_REG is unused in code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01mpc8548cds: Rework CONFIG_LEGACY usageTom Rini
This CONFIG option is used in one place, so pick a more direct name and migrate to Kconfig. Rework the code slightly. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFRTC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFRTC CONFIG_SYS_MCFRTC_BASE While at it, remove '#undef RTC_DEBUG' from these config files. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01stmark2: Remove CONFIG_SERIAL_FLASHTom Rini
This is not referenced anywhere, remove it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_MCFTMR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFTMR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_CF_DSPI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CF_DSPI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01atmel: Remove CONFIG_SPL_ATMEL_SIZETom Rini
This seems to be unused in the code, remove it. Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Remove CONFIG_BOARDNAME and CONFIG_BOARD_NAMETom Rini
Both of these variables are used in a few hard-coded ways to set some string values or print something to the user. In almost all cases, it's just as useful to hard-code the value used. The exception here is printing something closer to correct board name for p1_p2_rdb machines. This can be done using something from the device tree, but for now hard-code a non-CONFIG based value instead. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BITBANGMII_MULTI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BITBANGMII_MULTI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Convert CONFIG_BCM2835_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BCM2835_GPIO Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01Finish converting CONFIG_BOOTM_NETBSD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD CONFIG_BOOTM_RTEMS CONFIG_DESIGNWARE_WATCHDOG CONFIG_DISPLAY_CPUINFO CONFIG_DM_ETH CONFIG_DM_MMC CONFIG_DM_REGULATOR CONFIG_DM_SPI CONFIG_DM_SPI_FLASH CONFIG_ISO_PARTITION CONFIG_OF_SEPARATE CONFIG_SPI_FLASH_WINBOND CONFIG_SPL_ETH CONFIG_TIMER CONFIG_USB_DWC3 CONFIG_USB_DWC3_GADGET CONFIG_USB_DWC3_OMAP CONFIG_USB_DWC3_PHY_OMAP CONFIG_USB_EHCI_TEGRA CONFIG_USB_GADGET_DOWNLOAD CONFIG_USB_GADGET_DUALSPEED CONFIG_USB_GADGET_MANUFACTURER CONFIG_USB_GADGET_PRODUCT_NUM CONFIG_USB_GADGET_VBUS_DRAW CONFIG_USB_GADGET_VENDOR_NUM This catches a number of cases where board config files were #undef various CONFIG options when building SPL, and that doesn't work. Clean up the related comments as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-28video: Convert CONFIG_VIDEO_BCM2835 to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_BCM2835 This is the final ad-hoc CONFIG_VIDEO_... to convert. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Matthias Brugger <mbrugger@suse.com>
2022-03-28video: Drop FSL DIU driverSimon Glass
This does not use driver model and is more than two years past the migration date. Drop it. It can be added back later if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: fsl: colibri_vf: Drop FSL DCU driverSimon Glass
This does not use driver model and is more than two years past the migration date. Drop it. It can be added back later if needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28video: Drop references to CONFIG_VIDEO et alSimon Glass
Drop the Kconfigs which are not used and all references to them. In particular, this drops CONFIG_VIDEO to avoid confusion and allow us to eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO. Also drop the prototype for video_get_info_str() which is no-longer used. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jason Liu <jason.hui.liu@nxp.com>
2022-03-28video: Drop CONFIG_VIDEO_BMP_LOGOSimon Glass
This option is not implemented anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-28Merge tag 'v2022.04-rc5' into nextTom Rini
Prepare v2022.04-rc5
2022-03-25Convert CONFIG_BACKSIDE_L2_CACHE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BACKSIDE_L2_CACHE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25vinco: Remove CONFIG_ATMEL_SPI0Tom Rini
This is not referenced anywhere, remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25lcd: Remove LCD_TEST_PATTERN codeTom Rini
This is a legacy driver and the value is set in board config headers without a CONFIG prefix. Remove the code. Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_LCD_INFO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LCD_INFO CONFIG_LCD_LOGO CONFIG_LCD_INFO_BELOW_LOGO CONFIG_LCD_IN_PSRAM Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_ATMEL_LCD et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 CONFIG_GURNARD_SPLASH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_MII_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MII_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_PHY_RESET_DELAY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHY_RESET_DELAY Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_RX_ETH_BUFFER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_RX_ETH_BUFFER Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_LPC32XX_ETH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LPC32XX_ETH Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_TFTP_PORT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TFTP_PORT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_RMII to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RMII Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FAULT_ECHO_LINK_DOWN Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 12:32:52 +0000