aboutsummaryrefslogtreecommitdiff
path: root/include/usb
AgeCommit message (Collapse)Author
2023-02-07usb: Drop unused fotg210 gadgetSimon Glass
This is not used and appears to be associated with the faraday board which has been removed. Drop the driver and Kconfig options. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07usb: Drop unused ehci-faraday driverSimon Glass
This is not used. Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-01-27usb: xhci: Fix root hub descriptorMark Kettenis
When a system has multiple XHCI controllers, some of the properties described in the descriptor of the root hub (such as the number of ports) might differ between controllers. Fix this by switching from a single global hub descriptor to a hub descriptor per controller. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Marek Vasut <marex@denx.de>
2023-01-27usb: xhci: Implement DMA mappingMark Kettenis
An XHCI controller that sits behind an IOMMU needs to map and unmap its memory buffers to do DMA. Implement this by inroducing new xhci_dma_map() and xhci_dma_unmap() helper functions. The xhci_dma_map() function replaces the existing xhci_virt_to_bus() function in the sense that it returns the bus address in the case of simple address translation in the absence of an IOMMU. The xhci_bus_to_virt() function is eliminated by storing the CPU address of the allocated scratchpad memory in struct xhci_ctrl. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Marek Vasut <marex@denx.de>
2023-01-20global: Finish CONFIG -> CFG migrationTom Rini
At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-09-19usb: gadget: designware-udc: Drop the driverMarek Vasut
This driver is not used by any system and is long unmaintained, drop it. There is a DWC2 OTG driver which is maintained, see CONFIG_USB_GADGET_DWC2_OTG . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-07-07arm: Remove PXA architecture supportTom Rini
With the last platform for this architecture removed, remove the rest of the architecture support as well. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-06-28usb: ehci-fsl: Remove non-DM codeTom Rini
The deadline for DM_USB migration has passed and all users have been migrated. Remove now unused code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17stm32mp1: fix reference for STMicroelectronicsPatrick Delaunay
Replace reference to the correct name STMicroelectronics Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-01-19doc: replace @return by Return:Heinrich Schuchardt
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-09-22usb: ehci-mx6: use phy_type from device treeMatthias Schiffer
Allow using different PHY interfaces for multiple USB controllers. When no value is set in DT, we fall back to CONFIG_MXC_USB_PORTSC for now to stay compatible with current board configurations. This also adds support for the HSIC mode of the i.MX7. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-09-22usb: ehci-ci: remove redundant PORTSC flag definitionsMatthias Schiffer
These definitions are unused, all boards that define portsc flags use the equivalent PORT_* definitions instead. Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com> Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
2021-09-22usb: xhci-pci: Move reset logic out of XHCI coreSamuel Holland
Resetting an XHCI controller inside xhci_register undoes any register setup performed by the platform driver. And at least on the Allwinner H6, resetting the XHCI controller also resets the PHY, which prevents the controller from working. That means the controller must be taken out of reset before initializing the PHY, which must be done before calling xhci_register. The logic in the XHCI core was added to support the Raspberry Pi 4 (although this was not mentioned in the commit log!), which uses the xhci-pci platform driver. Move the reset logic to the platform driver, where it belongs, and where it cannot interfere with other platform drivers. This also fixes a failure to call reset_free if xhci_register failed. Fixes: 0b80371b350e ("usb: xhci: Add reset controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-02-18xhci: translate virtual addresses into the bus's address spaceNicolas Saenz Julienne
So far we've been content with passing physical addresses when configuring memory addresses into XHCI controllers, but not all platforms have buses with transparent mappings. Specifically the Raspberry Pi 4 might introduce an offset to memory accesses incoming from its PCIe port. Introduce xhci_virt_to_bus() and xhci_bus_to_virt() to cater with these limitations, and make sure we don't break non DM users. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Tested-by: Peter Robinson <pbrobinson@gmail.com> [mb: fix compilation for 32 bit] Signed-off-by: Matthias Brugger <mbrugger@suse.com> fix from nicolas
2020-11-22usb: dwc2: add "u-boot,force-vbus-detection" for stm32Patrick Delaunay
On some board, the ID pin is not connected so the B session must be overridden with "u-boot,force_b_session_valid" but the VBus sensing must continue to be handle. To managed it, this patch adds a new DT field "u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-10-01usb: xhci: use macros with parameter to fill ep_info2Chunfeng Yun
Use macros with parameter to fill ep_info2, then some macros for MASK and SHIFT can be removed Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01usb: xhci: convert to TRB_TX_TYPE()Chunfeng Yun
Use TRB_TX_TYPE() instead of (TRB_DATA_OUT/IN << TRB_TX_TYPE_SHIFT) Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01usb: xhci: convert to TRB_LEN() and TRB_INTR_TARGET()Chunfeng Yun
For normal TRB fields: use TRB_LEN(x) instead of ((x) & TRB_LEN_MASK); and use TRB_INTR_TARGET(x) instead of (((x) & TRB_INTR_TARGET_MASK) << TRB_INTR_TARGET_SHIFT) Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01usb: xhci: convert to TRB_TYPE()Chunfeng Yun
Use TRB_TYPE(p) instead of ((p) << TRB_TYPE_SHIFT) Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01usb: xhci: convert to HCS_MAX_PORTS()Chunfeng Yun
Use HCS_MAX_PORTS(p) instead of ((p & HCS_MAX_PORTS_MASK) >> HCS_MAX_PORTS_SHIFT) Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01usb: xhci: add quirks flag to support MediaTek xHCI 0.96Chunfeng Yun
There some vendor quirks for MTK xHCI 0.96 host controller: 1. It defines some extra SW scheduling parameters for HW to minimize the scheduling effort for synchronous and interrupt endpoints. The parameters are put into reserved DWs of slot context and endpoint context. 2. Its TDS in Normal TRB defines a number of packets that remains to be transferred for a TD after processing all Max packets in all previous TRBs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01usb: xhci: create one unified function to calculate TRB TD remainderChunfeng Yun
xhci versions 1.0 and later report the untransferred data remaining in a TD a bit differently than older hosts. We used to have separate functions for these, and needed to check host version before calling the right function. Now Mediatek host has an additional quirk on how it uses the TD Size field for remaining data. To prevent yet another function for calculating remainder we instead want to make one quirk friendly unified function. Porting from the Linux: c840d6ce772d("xhci: create one unified function to calculate TRB TD remainder.") 124c39371114("xhci: use boolean to indicate last trb in td remainder calculation") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-10-01usb: xhci: add a member hci_version in xhci_ctrl structChunfeng Yun
Add a member to save xHCI version, it's used some times. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-10usb: xhci: Add reset controller supportNicolas Saenz Julienne
Some atypical users of xhci might need to manually reset their xHCI controller before starting the HCD setup. Check if a reset controller device is available to the PCI bus and trigger a reset. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> [mb: squash fix to only build xhci_reset_hw() if CONFIG_DM_BUS] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-07-09usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readqSylwester Nawrocki
There might be hardware configurations where 64-bit data accesses to XHCI registers are not supported properly. This patch removes the readq/writeq so always two 32-bit accesses are used to read/write 64-bit XHCI registers, similarly as it is done in Linux kernel. This patch fixes operation of the XHCI controller on RPI4 Broadcom BCM2711 SoC based board, where the VL805 USB XHCI controller is connected to the PCIe Root Complex, which is attached to the system through the SCB bridge. Even though the architecture is 64-bit the PCIe BAR is 32-bit and likely the 64-bit wide register accesses initiated by the CPU are not properly translated to a sequence of 32-bit PCIe accesses. xhci_readq(), for example, always returns same value in upper and lower 32-bits, e.g. 0xabcd1234abcd1234 instead of 0x00000000abcd1234. Cc: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-02xhci: mediatek: Add support for MTK xHCI host controllerChunfeng Yun
This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-11-17rockchip: usb: Migrate to use ofnodeKever Yang
Migrate to use ofnode_* instead of fdt_* so that we may able to use live dt for usb udc driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-10-24usb: xhci: move xhci.h to include usbJean-Jacques Hiblot
The xhci.h header file is currently located under drivers/usb/xhci Move it to the include/usb folder to make it available to drivers that are not under drivers/usb/xhci Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-05-20mpc83xx: Introduce ARCH_MPC834*Mario Six
Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-04-21usb: dwc2: add support for STM32MP1Patrick Delaunay
Add compatible "st,stm32mp1-hsotg" and associated driver data to manage the usb33d-supply and the ST specific register for VBus sensing. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> # Conflicts: # drivers/usb/gadget/dwc2_udc_otg.c Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2_udc_otg: Add tx_fifo_sz array supportPatrice Chotard
All TX fifo size can be different, add tx_fifo_sz_array[] into dwc2_plat_otg_data to be able to set them. tx_fifo_sz_array[] is 17 Bytes long and can contains max 16 tx fifo size (synopsys IP supports max 16 IN endpoints). First entry of tx_fifo_sz_array[] is the number of valid fifo size the array contains. In case of tx_fifo_sz_array[] doesn't contains the same number of element than max hardware endpoint, display a warning message. Compatibility with board which doesn't use tx_fifo_sz_array[] (Rockchip rk322x/rk3128/rv1108/rk3288/rk3036) is kept. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add function for session B checkPatrick Delaunay
Add a new function to check the session B validity, to be use to check cable connection. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add force-b-session-valid supportPatrick Delaunay
Handle "force-b-session-valid" property from DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-14usb: composite: Move bitmap related operations to ./include/linux/bitmap.hLukasz Majewski
The BITMAP related operations can now be moved to ./include/linux/bitmap.h file to mimic the Linux kernel directory tree. This change also allows to remove the lin_gadget_compat.h header file (which is a legacy code only for composite U-boot layer). It was also possible to remove #includes from several USB gadget drivers. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
2018-12-06usb: dwc2-otg: make regs_phy (in platdata) a uintptr_tPhilipp Tomsich
The regs_phy field of the platform data structure for dwc2-otg is today declared an unsigned int, but will eventually be cast into a void* for a writel operation. This triggers errors on modern GCC versions. E.g. we get the following error with GCC 6.3: drivers/usb/phy/rockchip_usb2_phy.c: In function 'property_enable': arch/arm/include/asm/io.h:49:29: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) ^ arch/arm/include/asm/io.h:117:48: note: in expansion of macro '__arch_putl' #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^~~~~~~~~~~ drivers/usb/phy/rockchip_usb2_phy.c:61:2: note: in expansion of macro 'writel' writel(val, pdata->regs_phy + reg->offset); ^~~~~~ This commit changes regs_phy to be a uintptr_t to ensure that it is large enough to hold any valid pointer (and fix the associated warning). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-29bitops: collect BIT macros to include/linux/bitops.hMasahiro Yamada
Same macros are defined in various places. Collect them into include/linux/bitops.h like Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-12usb: ehci-ci: Add a prototype for board_ehci_power()Diego Dorta
When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:601:5: warning: no previous prototype for ‘board_ehci_power’ [-Wmissing-prototypes] int board_ehci_power(int port, int on) Remove this warning by adding the function prototype into usb/ehci-ci.h file. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
2017-09-22armv7: ls1021a: Fix marco CONFIG_LS102XAYork Sun
Commit a8ecb39e accidentally reverted config macro CONFIG_ARCH_LS1021A to CONFIG_LS102XA. Signed-off-by: York Sun <york.sun@nxp.com>
2017-08-09config: ls1012aqds: Enable USB EHCI support for ls1012aqdsRajesh Bhagat
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> [YS: Revise subject, remove commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-12powerpc, 8xx: remove support for 8xxHeiko Schocher
There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-07usb: dwc2-otg: make regs_otg (in platdata) a uintptr_tPhilipp Tomsich
The regs_otg field in uintptr_t of the platform data structure for dwc2-otg has thus far been an unsigned int, but will eventually be casted into a void*. This raises the following error with GCC 6.3 and buildman: ../drivers/usb/gadget/dwc2_udc_otg.c: In function 'dwc2_udc_probe': ../drivers/usb/gadget/dwc2_udc_otg.c:821:8: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] reg = (struct dwc2_usbotg_reg *)pdata->regs_otg; ^ This changes regs_otg to a uintptr_t to ensure that it is large enough to hold any valid pointer (and fix the associated warning). Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-04-17armv7: ls1021a: Drop macro CONFIG_LS102XAYork Sun
Use CONFIG_ARCH_LS1021A instead. Signed-off-by: York Sun <york.sun@nxp.com>
2016-09-23Move ENOTSUPP defines to include/linux/errno.hMasahiro Yamada
Collect a couple of duplicated defines into a single place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-07-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-07-26include: usb: Rename USB controller base address mappingRajesh Bhagat
Remove Soc specific defines and use generic chasis specific defines for USB controller base address mapping. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-07-25usb: dwc2-otg: adjust fifo size via platform dataXu Ziyuan
The total FIFO size of some SoCs may be different from the existen, this patch supports fifo size setting from platform data. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-25usb: rockchip-phy: implement USB2.0 phy controlXu Ziyuan
So far, Rockchip SoCs have two kinds of USB2.0 phy, such as Synopsys and Innosilicon. This patch applys dwc2 usb driver framework to implement phy_init() and phy_off() methods for Synopsys phy on Rockchip platform. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-04-01ehci-ci.h: drop generic USBCMD fieldsMateusz Kulikowski
Use definitions from ehci.h instead. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>