aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-07-12stm32mp1: Add UBIFS boot capabilityPatrick Delaunay
Add support for boot from NAND in generic ditribution command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: add configuration op-teePatrick Delaunay
Add support of Trusted boot chain with OP-TEE - reserved 32MB at the end of the DDR for OP-TEE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: reorder some CONFIG in stm32mp1.hPatrick Delaunay
Change config not directly linked to CONFIG_DISTRO_DEFAULTS. Allow to deactivate CONFIG_SYS_MTDPARTS_RUNTIME when CONFIG_MTDPARTS_DEFAULT is defined in defconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: force boot_net_usb_startPatrick Delaunay
Prevent USB enumeration and avoid unnecessary delay in bootcmd_pxe as Ethernet device is not attached to USB. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: add check for presence of environment in boot devicePatrick Delaunay
For boot from flash, check presence of default environment to force save env. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12dt-bindings: pinctrl: stm32: add new entry for package informationPatrick Delaunay
Add "st,package" entry. Possibles values are: -STM32MP_PKG_AA for LFBGA448 (18*18) package -STM32MP_PKG_AB for LFBGA354 (16*16) package -STM32MP_PKG_AC for TFBGA361 (12*12) package -STM32MP_PKG_AD for TFBGA257 (10*10) package see Linux commit 966d9b928f626a54a0c27c0fdae1e3dfe9bab416 for v5.2-rc1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: move CONFIG_ENV in KconfigPatrick Delaunay
Move 2 ENV configuration flags in board Kconfig - CONFIG_ENV_SECT_SIZE - CONFIG_ENV_OFFSET Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11include: android_bootloader_message.h: Minimize the diff to AOSPEugeniu Rosca
Perform the following updates: - Relocate the commit id from the file to the description of U-Boot commit. The AOSP commit is c784ce50e8c10eaf70e1f97e24e8324aef45faf5. This is done to avoid stale references in the file itself. The reasoning is in https://patchwork.ozlabs.org/patch/1098056/#2170209. - Minimize the diff to AOSP, to decrease the effort of the next AOSP backports. The background can be found in: https://patchwork.ozlabs.org/patch/1080394/#2168454. - Guard the static_assert() calls by #ifndef __UBOOT__ ... #endif, to avoid compilation failures of files including the header. Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-11configs: Rename CONFIG_IMAGE_FORMAT_LEGACY to CONFIG_LEGACY_IMAGE_FORMATTom Rini
The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY). In a few places outside of cmd/ switch to using CONFIG_IS_ENABLED() to test what is set. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-11drivers: pci_ep: Introduce UCLASS_PCI_EP uclassRamon Fried
Introduce new UCLASS_PCI_EP class for handling PCI endpoint devices, allowing to set various attributes of the PCI endpoint device, such as: * configuration space header * BAR definitions * outband memory mapping * start/stop PCI link Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-10Merge https://gitlab.denx.de/u-boot/custodians/u-boot-ubiTom Rini
[trini: Migrate sama5d27_som1_ek_qspiflash/sama5d2_xplained_qspiflash for CONFIG_ENV_SECT_SIZE] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-09Merge tag 'u-boot-atmel-2019.10-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features and fixes for 2019.10 cycle This includes the Atmel QSPI driver and support for the at91 boards. This is the port of the driver from Linux, mostly done by Tudor Ambarus.
2019-07-09configs: sama5d2_xplained: add support QSPI flash bootEugen Hristev
The spi-nor flash resides on spi bus 1. Update the CONFIG_ENV_SPI_CS and CONFIG_BOOTCOMMAND accordingly. Based on original work by Wenyou Yang. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [tudor.ambarus@microchip.com: amend the commit message.] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-07-09configs: sama5d27_som1_ek: qspi: use common memory layoutTudor Ambarus
Use the qspi memory layout defined in at91-sama5_common - it aligns with the 8 Mbyte flash (sst26vf064b-104i/sn) available in sama5d27_som1_ek. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-07-09ARM: at91: sama5: add common environment for QSPICyrille Pitchen
Use the same memory layout as we use for the NAND boot on the other boards. QSPI flashes are present on the following boards: sama5d2_xplained RevB: 32 Mbyte flash (mx25l3273fm2i-08g) sama5d2_xplained RevC: 8 Mbyte flash (sst26vf064b-104i/sn) sama5d27_som1_ek: 8 Mbyte flash (sst26vf064b-104i/sn) sama5d2_ptc_ek: 8 Mbyte flash (sst26vf064b-104i/sn) The 8 Mbyte limit is enough to cope with the memory layout used in the NAND boot. rootfs exceeds the 8 Mbyte limit and will stay in eMMC in the sama5d2_xplained case. The final scope is to use a single memory layout for all boot medias. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com> [tudor.ambarus@microchip.com: change memory layout, add commit message] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-07-09ubispl: add support for loading volumes by nameHamish Guthrie
The motivation is to use the UBI atomic volume rename functionality to allow double copy software updates on UBI. To that end the SPL is configured to always load the same volume name (e.g. "u-boot"), whereas a software updater always installs into the secondary volume "u-boot_r". After successful installation, these two volume names are switched. This extension is protected by #ifdefs as it will somewhat slow down loading of volumes by id. This is because the code needs to disable the optimization of ignoring all volume ids which are not to-be-loaded, since these can only be resolved after attaching. This adds two vtbl related functions from Linux, which are taken from the same kernel version as the current main U-Boot UBI code (Linux 4.2 64291f7db5bd8). Signed-off-by: Hamish Guthrie <hamish.guthrie@kistler.com> Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org>
2019-07-09configs: migrate ubispl boards to KConfigMarkus Klotzbuecher
Migrate the ubispl configuration for the omap3_igep00x0 and am335x_igep003x boards to KConfig. Both boards were built with SOURCE_DATE_EPOCH=0 and found to be equal before and after. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Javier Martínez Canillas <javier@dowhile0.org> Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
2019-07-09at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigsMarkus Klotzbuecher
Enable the extended ENV options for AT91 and OMAP2PLUS in order to be able to use CONFIG_ENV_UBI_* on these architectures. As this change also makes the configs ENV_SIZE, ENV_SECT_SIZE, ENV_OFFSET visible to AT91 and OMAP2PLUS, migrate users of these to KConfig. This migration was run using an extended moveconfig.py which evaluates expressions such as "(512 << 10)". See patch ("moveconfig: expand simple expressions"). All modified boards were built with SOURCE_DATE_EPOCH=0 before and after the change and successfully confirmed that the identical binary is generated (the only exception was igep00x0, which does not define CONFIG_ENV_IS_IN_UBI in the original board header. Once that is defined, the test passes too). hs: rebased patch to: 68b90e57bc: "configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT" Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Cc: Heiko Schocher <hs@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Tom Rini <trini@konsulko.com>
2019-07-09env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUNDMarkus Klotzbuecher
Introduce the KConfig option CONFIG_ENV_UBI_VOLUME_REDUND for defining the name of the UBI volume used to store the redundant environment. Signed-off-by: Markus Klotzbuecher <markus.klotzbuecher@kistler.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Kyungmin Park <kmpark@infradead.org> hs: get rid of stm32mp1* build errors
2019-07-08Merge tag 'efi-2019-10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc1 Fix a possible overflow for GUID partition tables. For some runtime services we only have implementations valid at boottime. So we replace them when leaving boottime. Move this from SetVirtualAddressMap() to ExitBootServices() as SetVirtualAddressMap() is not called by all operating systems. Adjust the Python tests accordingly. Bump the supported UEFI specification version to 2.8.
2019-07-08Merge tag 'mmc-6-23' of https://github.com/MrVan/u-bootTom Rini
- Pull in the series to split fsl_esdhc for i.MX/non-i.MX cleanly
2019-07-07Merge tag 'dm-pull-7jul19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dmTom Rini
Fix booting for wandboard
2019-07-07imx6: wandboard: allow booting from MMC 2Heinrich Schuchardt
One of the SD-CARD slots on the Wandboard Quad B1 is MMC 2. Enable it as a boot device. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-07-07Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- DWC and i.MX6 fixes
2019-07-06efi_loader: detach runtime in ExitBootServices()Heinrich Schuchardt
Linux can be called with a command line parameter efi=novamap, cf. commit 4e46c2a95621 ("efi/arm/arm64: Allow SetVirtualAddressMap() to be omitted"). In this case SetVirtualAddressMap() is not called after ExitBootServices(). OpenBSD 32bit does not call SetVirtualAddressMap() either. Runtime services must be set to an implementation supported at runtime in ExitBootServices(). Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Alexander Graf <agraf@csgraf.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: bump UEFI specification number to 2.8Heinrich Schuchardt
We are implementing UEFI variable RuntimeServicesSupported and set the unimplemented runtime functions return EFI_UNSUPPORTED as described in UEFI specification 2.8. So let's also advertise this specification version in our system table. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@csgraf.de>
2019-07-06efi_loader: let the variable driver patch out the runtimeHeinrich Schuchardt
Our variable services are only provided at boottime. Therefore when leaving boottime the variable function are replaced by dummy functions returning EFI_UNSUPPORTED. Move this patching of the runtime table to the variable services implementation. Executed it in ExitBootServices(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: initialization of variable servicesHeinrich Schuchardt
Provide an initialization routine for variable services. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-06efi_loader: move efi_query_variable_info()Heinrich Schuchardt
Let's keep similar things together. Move efi_query_variable_info() to lib/efi_loader/efi_variable.c Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-05Merge tag 'rpi-next-2019.07' of https://github.com/mbgg/u-bootTom Rini
- fix complation error for CONFIG_USB - update RPi3 DTBs to v5.1-rc6 state - add defconfig for RPi3 B+ - Fix BCM2835_MBOX_TAG_TEST_PIXEL_ORDER define
2019-07-05dm: Add a No-op uclassJean-Jacques Hiblot
This uclass is intended for devices that do not need any features from the uclass, including binding children. This will typically be used by devices that are used to bind child devices but do not use dm_scan_fdt_dev() to do it. That is for example the case of several USB wrappers that have 2 child devices (1 for device and 1 for host) but bind only one at a any given time. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-02rockchip: config: tiner-rk3288: extend CONFIG_SYS_MONITOR_LEN to 600KBKever Yang
The raw u-boot.bin for tinker board has been about 450KB without debug option, and 550KB with all debug on, and the default value is 200KB, which is not enough for run raw u-boot.bin. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-29efi_loader: correct signature of ConvertPointer()Heinrich Schuchardt
ConvertPointer() must be EFIAPI. The first parameter should be of type efi_uint_t. Use the same parameter name as the UEFI specification. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-28Merge tag 'u-boot-imx-20190628' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board
2019-06-28apalis_imx6: increase phy autoneg timeoutIgor Opaniuk
Default value (4000ms) of PHY_ANEG_TIMEOUT for Micrel KSZ9031 contoller isn't sufficient to finish auto-negotiation, which sometimes leads to timeout errors: Apalis iMX6 # dhcp FEC Waiting for PHY auto negotiation to complete......... TIMEOUT ! Increase the auto-negotiation time-out to 15000ms. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
2019-06-28ARM: imx: m53menlo: Convert to DM VIDEOMarek Vasut
Enable DM Video support on iMX53 M53Menlo and fix minor details to restore previous behavior of the system. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-27pico-imx7d: remove unused 'script' variablePierre-Jean Texier
Since the pico-pi uses the distroboot, this commit remove the 'script' variable (cf boot_scripts). Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-27apalis_imx6: fix set_emmcargs wrapperIgor Opaniuk
Fix set_emmcargs wrapper, which prepares proper bootargs for booting from eMMC. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
2019-06-27usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDPFrieder Schrempf
Add support for loading u-boot FIT images over the USB SDP protocol in the SPL Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> [Various build fixes] Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Fabio Estevam <festevam@gmail.com> Tested-by: Lukasz Majewski <lukma@denx.de>
2019-06-26rockchip: rk3328: add SPL supportKever Yang
Add SPL support for rk3328, default with of-platdata enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> [cherry picked from https://github.com/rockchip-linux/u-boot/commit/cb2b7a1bc75ebb116b1eb9b0ae0223e84d86fc4b with minor modifications] Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-23mmc: fsl_esdhc_imx: drop useless codeYangbo Lu
Dropped useless code for i.MX eSDHC driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-06-23mmc: fsl_esdhc: drop i.MX codeYangbo Lu
Dropped i.MX code which couldn't be reused. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
2019-06-23mmc: split fsl_esdhc driver for i.MXYangbo Lu
The fsl_esdhc driver was for Freescale eSDHC on MPC83XX/MPC85XX initially. The later QoriQ series PowerPC processors (which were evolutions of MPC83XX/MPC85XX), QorIQ series ARM processors, and i.MX series processors were using this driver for their eSDHCs too. For the two series processors, the eSDHCs are becoming more and more different. We should have split it into two drivers, like them (sdhci-of-esdhc.c/sdhci-esdhc-imx.c) in linux kernel. This patch is just to create a fsl_esdhc_imx driver which is a copy of fsl_esdhc driver for i.MX processors. We will convert i.MX processors to use fsl_esdhc_imx, and clean up the two drivers separately in the future patches. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
2019-06-23Move CONFIG_FSL_ESDHC to defconfigYangbo Lu
Moved CONFIG_FSL_ESDHC from header files to defconfig files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
2019-06-21Merge tag 'efi-2019-07-rc5-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.07-rc5 (3) This pull request provides error fixes for the graphical output protocol, the text output protocol, and the extended text input protocol. Setting the boot device for the bootefi command is now not only supported by the 'load' command but also for the file system specific commands like 'fatload'.
2019-06-21config_distro_bootcmd: Init IDE devicesJoshua Watt
IDE devices are no longer automatically probed by u-boot, so it should be done by the distro boot command before attempting to boot from IDE (just like scsi and nvme) Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
2019-06-21board: Arcturus: DM: Disable drivers without DM support.Oleksandr Zhadan
Extra "not DM" controllers support is disabled. u-boot BSP still good enough to upgrade and run images. Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com> Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
2019-06-20efi_loader: EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL definitionHeinrich Schuchardt
EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.Reset() is a function and not a void * pointer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- PCIe driver change to support DM model - T2080QDS migrated to use PCIe DM model
2019-06-20powerpc: T208xQDS: Disable legacy PCIe driver when DM_PCI is enabledHou Zhiqiang
Disable legacy PCIe driver and unused PCIe macros when DM_PCI enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 09:17:54 +0000