aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-12-10drivers: ifc: add define for IFC_CSPRn TE bitAleksandar Gerasimovski
To drive TE pin high is supported IFC configuration that can be used on some designs. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10lx2160a: Fix address for secure boot headersManish Tomar
Update kernel_size_sd variable with correct value for lx2160a. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10ls1043a: Fix address for secure boot headersManish Tomar
Update kernelheader_addr and kernelheader_addr variables with correct values for ls1043a. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10include/configs: ls1012aqds: add default environment variableBiwen Li
This adds default environment variable for ls1012aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10armv8: lx2162aqds: Add support for LX2162AQDS platformMeenakshi Aggarwal
This patch add base support for LX2162AQDS board. LX2162AQDS board supports LX2162A family SoCs. This patch add basic support of platform. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: hui.song <hui.song_1@nxp.com> Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Signed-off-by: Vikas Singh <vikas.singh@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-10drivers/net/phy: Add CORTINA_NO_FW_UPLOAD to KconfigMeenakshi Aggarwal
Move CORTINA_NO_FW_UPLOAD to Kconfig file so that it can be controlled via defconfig files. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-12-09Merge tag 'u-boot-stm32-20201209' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Manage CONFIG_ENV_EXT4_DEVICE_AND_PART in stm32mp1 board - Update ARM STI and ARM STM STM32MP Arch maintainers emails - Enable internal pull-ups for SDMMC1 on DHCOM SoM
2020-12-09treewide: Update email address Patrick Delaunay and Patrice ChotardPatrice Chotard
Update Patrick and my email address with the one dedicated to upstream activities. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-12-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-imxTom Rini
2020-12-07configs: migrate CONFIG_IMX_THERMAL to defconfigsTom Rini
Done via moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-12-06board: toradex: add apalis-imx8x 2gb wb it v1.1a module supportIgor Opaniuk
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-12-06board: ge: bx50v3: check b850v3 power management watchdogIan Ray
Set `bootcause' from b850v3 power management watchdog status. Boot cause "REVERT" is no longer used, remove it. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06board: ge: bx50v3: correct CONFIG_CMD_NFSIan Ray
Fix typo in NFS command configuration check. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-12-06imx: aristainetos: enable U-Boot Environment variables protectionHeiko Schocher
enable Environment protection with: CONFIG_ENV_APPEND=y CONFIG_ENV_WRITEABLE_LIST=y CONFIG_ENV_ACCESS_IGNORE_FORCE and add board specific env_get_location() function. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06imx6: add support for aristainetos2c_cslb board variantHeiko Schocher
add support for aristainetos2c_cslb board variant. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-12-06imx6: remove not longer supported aristainetos boardsHeiko Schocher
Removed aristainetos2, 2b, 2b-csl. This boards have been recalled and destroyed. Adapt board code to remove stuff not needed anymore. Fix checkpatch warning, remove fdt_high and initrd_high from default environment. Signed-off-by: Heiko Schocher <hs@denx.de> zu remove
2020-12-04configs: cei-tk1-som: remove CONFIG_ARMV7_PSCI in include filePatrick Delaunay
Activate ARCH_SUPPORT_PSCI as other TEGRA124 target and remove CONFIG_ARMV7_PSCI and CONFIG_ARMV7_PSCI_NR_CPUS in configs file as they are migrated in Kconfig. Select CONFIG_ARMV7_PSCI_0_1 (the first PSCI version), because CONFIG_ARMV7_PSCI_0_2 and CONFIG_ARMV7_PSCI_1_0 are not activated in this product. Hi, This patch depend on the previous serie [1]. I don't test this patch on real hardware but after this patch the size of the binary don't change. In .config we have: CONFIG_ARCH_SUPPORT_PSCI=y CONFIG_ARMV7_PSCI=y # CONFIG_ARMV7_PSCI_1_0 is not set # CONFIG_ARMV7_PSCI_0_2 is not set CONFIG_ARMV7_PSCI_0_1=y CONFIG_ARMV7_PSCI_NR_CPUS=4 In u-boot.cfg, this patch only add the 2 lines #define CONFIG_ARCH_SUPPORT_PSCI 1 #define CONFIG_ARMV7_PSCI_0_1 1 [1] "Convert CONFIG_ARMV7_PSCI_1_0 and CONFIG_ARMV7_PSCI_0_2 to Kconfig" http://patchwork.ozlabs.org/project/uboot/list/?series=184029 Regards Patrick END Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Peter Chubb <peter.chubb@data61.csiro.au> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04arm: tegra: add options for BOOTENV_EFI_SET_FDTFILE_FALLBACK for tegra186Peter Robinson
Upstream linux DT naming doesn't align with the U-Boot DT, which may not always be the case so this allows using BOOTENV_EFI_SET_FDTFILE_FALLBACK where it might be appropriate for some boards. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04arm: tegra: define fdtfile option for distro bootPeter Robinson
For booting via UEFI we need to define the fdtfile option so bootefi has the option to load a fdtfile from disk. For arm64 the kernel dtb is located in a vendor directory so we define that as nvidia for that architecture. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-04apalis/colibri_t30: add note about colibri vs. nvidia uart mappingMarcel Ziswiler
The following mapping is applicable for Apalis T30: Apalis UART1: NVIDIA UARTA Apalis UART2: NVIDIA UARTD Apalis UART3: NVIDIA UARTB Apalis UART4: NVIDIA UARTC The following mapping is applicable for Colibri T30: Colibri UART-A: NVIDIA UARTA Colibri UART-B: NVIDIA UARTD Colibri UART-C: NVIDIA UARTB Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2020-12-02km/common: remove CONFIG_MTD_CONCATHolger Brunck
This was used for a board which is not supproted anymore and can therefore be dropped. CC: Stefan Roese <sr@denx.de> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02remove obsolete option CONFIG_JFFS2_CMDLINEHolger Brunck
This option is obsolete since 2009 and can be removed globally. CC: Stefan Roese <sr@denx.de> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-02log: typos in include/log.hHeinrich Schuchardt
Correct several typos. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-02global_data: Fix comment for dm_driver_rtSimon Glass
This comment is in the wrong format, so reports an error with 'make htmldocs'. Fix it. Fixes: a294ead8d25 ("dm: Use an allocated array for run-time device info") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-02log: Fix comment for LOGC_BOOTSimon Glass
This comment is in the wrong format, so reports an error with 'make htmldocs'. Fix it. Fixes: b73d61a5565 ("x86: zimage: Add a little more logging") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-02linux/compat.h: Remove debug() from spin_lock_irqsave()Andy Shevchenko
It seems nobody tested the debug() option in spin_lock_irqsave(). Currently, when #define DEBUG, it spoils the compiler with In file included from drivers/usb/dwc3/gadget.c:18: drivers/usb/dwc3/gadget.c: In function ‘dwc3_gadget_set_selfpowered’: include/log.h:235:4: warning: ‘flags’ is used uninitialized in this function [-Wuninitialized] 235 | printf(pr_fmt(fmt), ##args); \ | ^~~~~~ drivers/usb/dwc3/gadget.c:1347:17: note: ‘flags’ was declared here 1347 | unsigned long flags; | ^~~~~ and so on... Drop useless debug() call to make compiler happy. Fixes: 0c06db598367 ("lib, linux: move linux specific defines to linux/compat.h") Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-11-29Merge tag 'mmc-2020-11-29' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - mmc minor update for better debug and error check - fsl_esdhc sysctl set and make sure delay check for HS400
2020-11-29lib/efi_loader: fix ABI in efi_mm_communicate_headerEtienne Carriere
Pack struct efi_mm_communicate_header as done in EDK2 as seen in release 201808 [1]. If not packed sizeof() for the structure adds 4 additional bytes on 32bit targets which breaks the ABI. Link: [1] https://github.com/tianocore/edk2/blob/edk2-stable201808/MdePkg/Include/Protocol/MmCommunication.h#L21 Fixes: 23a397d2e2fb ("efi_loader: Add headers for EDK2 StandAloneMM communication") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-28mmc: fsl_esdhc: make sure delay chain locked for HS400Yangbo Lu
For eMMC HS400 mode, the DLL reset is a required step for mmc rescan. This step has not been documented in reference manual, but the RM will be fixed sooner or later. In previous commit to support eMMC HS400, db8f936 mmc: fsl_esdhc: support eMMC HS400 mode the steps to configure DLL could be found in commit message, 13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL]. 14. Wait for delay chain to lock. these would be fixed as, 13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL]. 13.1 Write DLLCFG0[DLL_RESET] to 1 and wait for 1us, then write DLLCFG0[DLL_RESET] 14. Wait for delay chain to lock. This patch is to add the step of DLL reset, and make sure delay chain locked for HS400. Fixes: db8f93672b42 ("mmc: fsl_esdhc: support eMMC HS400 mode") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-25reset: stm32: Add support of MCU HOLD BOOTPatrick Delaunay
Handle the register RCC_MP_GCR without SET/CLR registers but with a direct access to bit BOOT_MCU: - deassert => set the bit: The MCU will not be in HOLD_BOOT - assert => clear the bit: The MCU will be set in HOLD_BOOT With this patch the RCC driver handles the MCU_HOLD_BOOT_R value added in binding stm32mp1-resets.h Cc: Fabien DESSENNE <fabien.dessenne@st.com> Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-11-22usb: dwc2: add "u-boot,force-vbus-detection" for stm32Patrick Delaunay
On some board, the ID pin is not connected so the B session must be overridden with "u-boot,force_b_session_valid" but the VBus sensing must continue to be handle. To managed it, this patch adds a new DT field "u-boot,force-vbus-detection" to use with "u-boot,force_b_session_valid" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-11-21Merge tag 'efi-2021-01-rc3-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc3 (2) The parameter check for UEFI service GetNextVariableName() is corrected. The dependencies of CONFIG_DFU_TFTP are simplified. The set of supported hash algorithms reported by the EFI_TCG2_PROTOCOL is corrected.
2020-11-21efi_loader: tcg2 protocol updatesIlias Apalodimas
On pull reuqest https://lists.denx.de/pipermail/u-boot/2020-November/432735.html V4 of the patchset was sent instead of the v5. This is the v4->v5 missing diff Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-20microblaze: Detect NOR flash based on DTMichal Simek
Remove fixed configuration and detect flash based on DT. Also increase amount of flash sectors to 2048 because on kc705 flash has 1027 sectors. Bank # 1: CFI conformant flash (16 x 16) Size: 128 MB in 1027 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962 Erase timeout: 4096 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Unify of setting for SPL_NOR/XIP supportMichal Simek
XIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with using SYS_FLASH_BASE are wrong because it is not aligned with DM. That's why change these macro and align them with TEXT_BASE macro. Information should be find at run time based on DT but implementation is not done yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Remove CONFIG_SYS_FDT_SIZEMichal Simek
CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Get rid of xparameters.hMichal Simek
There is no need to use this file anymore. Include it in main config file and simplify logic based on it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Simplify cache handlingMichal Simek
Enable caches by default. For now just simplify config file but it should be read from DT or PVRs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-20microblaze: Clean config file from ifdef messMichal Simek
A lot of configs has been moved to Kconfig and it ends up in ifdef mess with no bodies. That's why remove all of them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-19fs/squashfs: implement exists() functionRichard Genoud
This permits to find a file and use the distro_bootcmd Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
2020-11-19km/ppc: use Kconfig for MEMTEST configurationHolger Brunck
Also change back SYS_MEMTEST_END to 0x00f00000. 0xe00000 was wrong and introduced due to the global Kconfig migration of this option in u-boot. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-19km: replace hardcoded address for imported environmentMatteo Ghidoni
Instead of using an hard coded address, make use of an already defined address for importing the environment for ramfs and nfs boot. This allows boards having different mapping to use the same code. CC: Heiko Schocher <hs@denx.de> CC: Tom Rini <trini@konsulko.com> Signed-off-by: Matteo Ghidoni <matteo.ghidoni@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
2020-11-17sunxi: DT: A64: update device tree filesSamuel Holland
Import updated device trees from Linux tag v5.9. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream. A couple of headers needed updates for recently-added hardware support. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-11-16Merge tag 'ti-v2021.01-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Fix Nokia RX-51 boot issues - Fix CONFIG_LOGLEVEL on K3 devices - Add phyBOARD REGOR support
2020-11-15Nokia RX-51: Remove old comments from configs/nokia_rx51.h filePali Rohár
These comments are relict for old, now removed config options. So remove these obsoleted comments too. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15Nokia RX-51: Convert to CONFIG_DM_I2CPali Rohár
Use twl4030_i2c_read(), i2c_get_chip_for_busnum() and remove CONFIG_SYS_I2C. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-11-15power: twl4030: Add twl4030_i2c_read() functionPali Rohár
Function twl4030_i2c_read() is like twl4030_i2c_read_u8() but instead of single value it rather returns array of values. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-11-14efi_loader: Add basic EFI_TCG2_PROTOCOL supportIlias Apalodimas
Since U-boot EFI implementation is getting richer it makes sense to add support for EFI_TCG2_PROTOCOL taking advantage of any hardware TPM available on the device. This is the initial implementation of the protocol which only adds support for GetCapability(). It's limited in the newer and safer TPMv2 devices. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-14tpm: Add some headers from the specIlias Apalodimas
A following patch introduces EFI_TCG2_PROTOCOL. Add the required TPMv2 headers to support it. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-14efi_selftest: keep devices in ExitBootServices()Heinrich Schuchardt
When calling ExitBootServices during out unit tests we should not detach devices as we need console output for runtime tests. Fixes: 529441ca89b1 ("efi_loader: Disable devices before handing over control") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 09:29:04 +0000