aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-05-01arm: enable distro boot for bananapi-r2Matthias Brugger
This patch enables distro boot for the bananapi-r2, based on a MediaTek mt7623n. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
2020-05-01configs: migrate CONFIG_SYS_ARM_CACHE_* in KconfigPatrick Delaunay
Move CONFIG_SYS_ARM_CACHE_WRITETHROUGH and CONFIG_SYS_ARM_CACHE_WRITEALLOC into Kconfig done by moveconfig.py. Kconfig uses a choice between the 3 values supported in U-Boot, including the new configuration CONFIG_SYS_ARM_CACHE_WRITEBACK (the default configuration). The patch also avoids to select simultaneously 2 configurations. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini
- distro boot support for SPI flash - sifive spi flash driver
2020-04-30Merge tag 'efi-2020-07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc2 This pull request contains bug fixes needed due to the merged changes for EFI secure boot. Patches are supplied to identify EFI system partitions.
2020-04-30mtd: spi-nor: Enable QE bit for ISSI flashJagan Teki
Enable QE bit for ISSI flash chips. QE enablement logic is similar to what Macronix has, so reuse the existing code itself. Cc: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-30rk3399: Enable SF distro bootcmdJagan Teki
Enable SPI flash(SF) distro boot command in rk3399. This distro boot will read the boot script at specific location at the flash and start sourcing the same. Included the SF device at the last of the target devices list since all the rest of the devices on the list have more possibility to boot the distribution due to the size of the SPI flash is concern. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- DM ACPI support (Part A) - Improve support for chain-loading x86 U-Boot
2020-04-30Merge tag 'xilinx-for-v2020.07-rc2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2020.07-rc2 mmc: - Fix dt property handling via generic function clk: - Fix versal watchdog clock setting nand: - Fix zynq nand command comparison xilinx: - Enable ubifs - Sync board_late_init configurations with initrd_high setup - Make custom distro boot more verbose zynq: - Kconfig alignments - Fix nand cse configuration zynqmp: - Fix zcu104 low level qspi configuration - Small DT updates Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-30Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- Add DM_ETH support for DPAA1, DPAA2 based RDB platforms: ls1046ardb, ls1043ardb, lx2160ardb, ls2088ardb, ls1088ardb. - Add GICv3 support for ls1028a, ls2088a, ls1088a. - Add lpuart support on ls1028aqds. - Few bug fixes and updates on ls2088a, ls1012a, ls1046a, ls1021a based platforms.
2020-04-30board: Add a gd flag for chain loadingSimon Glass
When U-Boot is run from another boot loader, much of the low-level init needs to be skipped. Add a flag for this and adjust ll_boot_init() to use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30acpi: Move the xsdt pointer to acpi_ctxSimon Glass
Put this in the context along with the other important pointers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Put table-setup code in its own functionSimon Glass
We always write three basic tables to ACPI at the start. Move this into its own function, along with acpi_fill_header(), so we can write a test for this code. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-30acpi: Move acpi_add_table() to generic codeSimon Glass
Move this code to a generic location so that we can test it with sandbox. This requires adding a few new fields to acpi_ctx, so drop the local variables used in the original code. Also use mapmem to avoid pointer-to-address casts which don't work on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Convert part of acpi_table to use acpi_ctxSimon Glass
The current code uses an address but a pointer would result in fewer casts. Also it repeats the alignment code in a lot of places so this would be better done in a helper function. Update write_acpi_tables() to make use of the new acpi_ctx structure, adding a few helpers to clean things up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Add a method to write tables for a deviceSimon Glass
A device may want to write out ACPI tables to describe itself to Linux. Add a method to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30x86: cbfs: Drop unwanted declarationSimon Glass
The intention here is add a forward declaration, not actually declare a variable. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30efi_loader: remove CONFIG_EFI_SECURE_BOOT in efi_loader.hAKASHI Takahiro
The guard doesn't make any difference, so remove it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30efi_loader: identify EFI system partitionHeinrich Schuchardt
In subsequent patches UEFI variables shalled be stored on the EFI system partition. Hence we need to identify the EFI system partition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30part: detect EFI system partitionHeinrich Schuchardt
Up to now for MBR and GPT partitions the info field 'bootable' was set to 1 if either the partition was an EFI system partition or the bootable flag was set. Turn info field 'bootable' into a bit mask with separate bits for bootable and EFI system partition. This will allow us to identify the EFI system partition in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- rmobile gen2/gen3 DTS sync and defconfig consolidation
2020-04-29driver: net: fm: add DM ETH supportMadalin Bucur
Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1012afrwy: drop env qspi_bootcmdBiwen Li
Drop useless environment variable installer and qspi_bootcmd for ls1012afrwy. Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from the nor flash, then drop it. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1046aqds: support distro bootBiwen Li
Add support of distro boot for ls1046aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: freescale: ls1028a: mux changes for lpuartYuantian Tang
mux changes in board file to enable lpuart1 and macro define for lpuart1 used for mux changes in board configuation register 13 Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29rk3399: Add boot flash script offset, sizeJagan Teki
Most of the SPI flash devices in rockchip (rk3399) are 16MiB size. So, let's use the script offset at the end of 8K.  This way it cannot overlap any offsets being used by software components in flash layout. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-04-29environment: distro: Add SF distro commandJagan Teki
Add distro boot command support for SPI flash (SF). This distro boot will read the boot script at specific location at the flash and start sourcing the same. This file need to include on required include/config file. Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-29spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enumTudor Ambarus
Commit: 0ebb261a0b2d ("spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum") in linux. When defining spi_mem_op templates we don't necessarily know the size that will be passed when the template is actually used, and basing the supports_op() check on op->data.nbytes to know whether there will be data transferred for a specific operation is not possible. Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum so that we can base our checks on op->data.dir instead of op->data.nbytes. This also fixes a bug identified with the atmel-quaspi driver. The spi-nor core, when erasing sectors, fills the spi_mem_op template using SPI_MEM_OP_NO_DATA, which initializes all the data members with value zero. This is wrong because data.dir is treated as SPI_MEM_DATA_IN, which translates in our driver to read accesses for erases (RICR), while the controller expects write accesses (WICR). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-29mtd: spi-nand: Import Toshiba SPI-NAND supportRobert Marko
Linux has good support for Toshiba SPI-NAND, so lets import it. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Tested-by: Luka Kovacic <luka.kovacic@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen2 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge tag 'u-boot-amlogic-20200428' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs - add GXBB USB PHY driver - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards - fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC2/DWC3 improvements - Assorted bugfixes
2020-04-28Merge tag 'dm-pull-27apr20' of git://git.denx.de/u-boot-dmTom Rini
Move Python tools to use absolute paths Minor buildman fixes for new features Make libfdt code more similar to upsteam
2020-04-28lx2160a : Update eMMC boot environment variableMeenakshi Aggarwal
Update mcinitcmd and bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1021a: Append CMA configuration to bootargsAlison Wang
The default reserved memory for CMA is high memory. If LPAE is enabled, highmem pages are non-remapped and can not be used with dma_alloc_coherent. Reserving low memory for CMA is needed for LS1021A. This patch appends the related CMA configuration to bootargs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28include/configs: ls1012afrwy: support dhcp bootBiwen Li
Add support of dhcp boot for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28dm: clk: add stub when CONFIG_CLK is deactivatedPatrick Delaunay
Add stub for functions clk_...() when CONFIG_CLK is deactivated. This patch avoids compilation issues for driver using these API without protection (#if CONFIG_IS_ENABLED(CLK)) For example, before this patch we have undefined reference to `clk_disable_bulk') for code: clk_disable_bulk(&priv->clks); clk_release_bulk(&priv->clks); Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-28arm64: dts: meson: sync dt and bindings from v5.7-rc1Neil Armstrong
Sync the device tree and dt-bindings from Linux v5.7-rc1 8f3d9f354286 ("Linux 5.7-rc1"). Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-27Merge tag 'mips-pull-2020-04-27' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - brcmnand: fix missing code path from Linux driver - bmips: fix build error when disabling USB - mips: add option to restore original exception vector base - mips: fix off-by-one error when clearing gd_data - mips: minor fixes for compatibility with generic SPL framework - spl: refactor legacy image loading - spl: add LZMA decompression support for legacy images - Makefile: add target to build LZMA compressed U-Boot images - mtmips: refactor and rewrite low-level init code - mtmips: add and enable SPL support with LZMA - mtmips: add support for MT7628 reference board - mtmips: add support for VoCore/VoCore2 board
2020-04-27mips: Add support for SoM "VoCore2".Mauro Condarelli
Small patch to add support for VoCore/VoCore2 board. VoCore is open hardware and runs OpenWrt/LEDE. It has WIFI, USB, UART, 20+ GPIOs but is only one inch square. It will help you to make a smart house, study embedded system or even make the tiniest router in the world. Details about this SoM can be found at "https://vocore.io/v2.html". Signed-off-by: Mauro Condarelli <mc5686@mclink.it> Reviewed-by: Stefan Roese <sr@denx.de>
2020-04-27mips: mtmips: add support for mt7628-rfbWeijie Gao
This patch adds support for mt7628 reference board. SPL_DM and DT are not enabled for SPL to save about 17KiB for u-boot-spl.bin. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27mips: mtmips: enable SPL for all boardsWeijie Gao
This patch enables SPL for all mtmips boards. And also remove defconfig files which are intend to build ram bootable u-boot files. SPL_DM and OF_CONTROL are enabled for both boards. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-27spl: spl_nor: Move legacy image loading into spl_legacy.cStefan Roese
Move the legacy image loading into spl_legacy.c. This makes it easier to extend the legacy image handling with new features that other SPL loaders might use (e.g. spl_spi.c etc). No functional change intended. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Weijie Gao <weijie.gao@mediatek.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-04-27bmips: allow disabling usb supportÁlvaro Fernández Rojas
Currently, if usb is disabled the following error is produced: CC drivers/usb/host/ohci-hcd.o drivers/usb/host/ohci-hcd.c: In function ‘usb_lowlevel_init’: drivers/usb/host/ohci-hcd.c:2057:35: error: ‘CONFIG_SYS_USB_OHCI_REGS_BASE’ undeclared (first use in this function); did you mean ‘CONFIG_SYS_MONITOR_BASE’? gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CONFIG_SYS_MONITOR_BASE drivers/usb/host/ohci-hcd.c:2057:35: note: each undeclared identifier is reported only once for each function it appears in drivers/usb/host/ohci-hcd.c:2061:20: error: ‘CONFIG_SYS_USB_OHCI_SLOT_NAME’ undeclared (first use in this function); did you mean ‘CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS’? gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-04-27xilinx: Make Xilinx custom distro boot commands more verboseMichal Simek
Extend description of Xilinx custom boot commands to make clear what runs and what failed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27xilinx: Move initrd_high setup to common locationMichal Simek
Moving to common location initrd_high is also setup for Zynq which hasn't done in run time code. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27mmc: zynq: parse dt when probingBenedikt Grassl
Currently, the entry "bus-width = <8>" in the ZynqMP's sdhci nodes is not evaluated. This results in the bus width staying at its default value (4 bit in HS200 mode). Fix this by calling mmc_of_parse. This function also checks for the "no-1-8-v" and "max-frequency" entries. Remove the handling of those nodes from this driver. Signed-off-by: Benedikt Grassl <Benedikt.Grassl@rohde-schwarz.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-27ARC: HSDK-4xD: use separate config fileEugeniy Paltsev
HSDK-4xD has quite different environment so let's split HSDK and HSDK-4xD configs file. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2020-04-27ARC: HSDK: CGU: add support for timer clockEugeniy Paltsev
Add support for additional timer clock which belongs to tunnel domain. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 02:06:18 +0000