aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-03-18Convert CONFIG_BOOT_RETRY_TIME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOT_RETRY_TIME CONFIG_BOOT_RETRY_MIN CONFIG_RESET_TO_RETRY We also introduce CONFIG_BOOT_RETRY to gate these options, and clean up the associated Makefile entry and C code for picking default values of CONFIG_BOOT_RETRY_MIN. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NET_RETRY_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NET_RETRY_COUNT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ARP_TIMEOUT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARP_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_A008044_WORKAROUND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_A008044_WORKAROUND Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_A003399_NOR_WORKAROUND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_A003399_NOR_WORKAROUND Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ARMV8_SWITCH_TO_EL1 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARMV8_SWITCH_TO_EL1 Cc: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2022-03-18Convert CONFIG_ARMV7_SECURE_BASE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARMV7_SECURE_BASE CONFIG_ARMV7_SECURE_MAX_SIZE CONFIG_ARMV7_SECURE_RESERVE_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18configs: Re-run migrationsTom Rini
As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Revert "efi: Allow easy selection of serial-only operation"Tom Rini
This commit re-introduced a migrated CONFIG symbol to the board header file. These changes should likely be handled via documentation instead, as well. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-18sunxi: Do not define CONFIG_SPL_STACK_ADDR_RTom Rini
We cannot define a CONFIG value here to ensure that the Kconfig value isn't set wrong. Fixes: 2c699fe0d34d ("configs: sunxi: Add common SUNIV header") Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-16Merge tag 'xilinx-for-v2022.07-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.07-rc1 microblaze: - Add support for reserved memory xilinx: - Update FRU code with MAC reading zynqmp: - Remove double AMS setting - DT updates (mostly for SOMs) - Add support for zcu106 rev 1.0 zynq: - Update nand binding nand: - Aligned zynq_nand to upstream DT binding net: - Add support for ethernet-phy-id mmc: - Workaround CD in zynq_sdhci driver also for ZynqMP - Add support for dynamic/run-time SD config for SOMs gpio: - Add driver for slg7xl45106 firmware: - Add support for dynamic SD config power-domain: - Update zynqmp driver with the latest firmware video: - Add skeleton driver for DP and DPDMA i2c: - Fix i2c to work with QEMU pinctrl: - Add driver for zynqmp pinctrl driver
2022-03-15lib/lz4: update LZ4 decompressor moduleHuang Jianan
Update the LZ4 compression module based on LZ4 v1.8.3 in order to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-03-15fs/erofs: add erofs filesystem supportHuang Jianan
This patch mainly deals with uncompressed files. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-03-14Merge tag 'v2022.04-rc4' into nextTom Rini
Prepare v2022.04-rc4
2022-03-14pinctrl: zynqmp: Add pinctrl driverAshok Reddy Soma
Add pinctrl driver for Xilinx ZynqMP SOC. This driver is compatible with linux device tree parameters for configuring pinmux and pinconf. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2d7eefa83c8c0129f7243a25de56a289e948f6c6.1645626183.git.michal.simek@xilinx.com
2022-03-14pinctrl: Increase length of pinmux status bufferAshok Reddy Soma
Xilinx ZynqMP SOC can set 6 parameters for its pins. pinmux status command will print the status of these parameters for each pin. But current print buffer length is only 40 characters long, increase it to 80 to print all the parameters. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3a6be84c8354f38754a9838670cc0319e84f29e8.1645626183.git.michal.simek@xilinx.com
2022-03-12efi_loader: copy GUID in InstallProtocolInterface()Heinrich Schuchardt
InstallProtocolInterface() is called with a pointer to the protocol GUID. There is not guarantee that the memory used by the caller for the protocol GUID stays allocated. To play it safe the GUID should be copied to U-Boot's internal structures. Reported-by: Joerie de Gram <j.de.gram@gmail.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-10arm: add initial support for the Phytium Pomelo Boardweichangzheng
This adds platform code and the device tree for the Phytium Pomelo Board. The initial support comprises the UART and the PCIE. Signed-off-by: weichangzheng <nicholas_zheng@outlook.com>
2022-03-10include: configs: j721e_evm.h: Fix the env variable corresponding to QSGMII ↵Aswath Govindraju
PHY init QSGMII PHY initialization should only be done for J721E EVMs and not for J721E-SK boards. Therefore, fix the environment variables accordingly. Also, by default remote processors should not be booted in U-Boot but rather be left to the users to enable this by setting dorprocboot. Therefore, remove dorprocboot that is being set by default. Fixes: 5980925e2a5a ("include: configs: j721e_evm: Add support to boot ethfw core in j721e") Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
2022-03-10event: Add a commandSimon Glass
Add a command to show the available events. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10event: Convert arch_cpu_init_dm() to use eventsSimon Glass
Instead of a special function, send an event after driver model is inited and adjust the boards which use this function. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10event: Convert misc_init_f() to use eventsSimon Glass
This hook can be implmented using events, for the three boards that actually use it. Add the event type and event handlers. Drop CONFIG_MISC_INIT_F since we can just use CONFIG_EVENT to control this. Since sandbox always enables CONFIG_EVENT, we can drop the defconfig lines there too. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10event: Add events for device probe/removeSimon Glass
Generate events when devices are probed or removed, allowing hooks to be added for these situations. This is controlled by the DM_EVENT config option. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-10event: Add basic support for eventsSimon Glass
Add a way to create and dispatch events without needing to allocate memory. Also add a way to 'spy' on events, thus allowing 'hooks' to be created. Use a linker list for static events, which we can use to replace functions like arch_cpu_init_f(). Allow an EVENT_DEBUG option which makes it easier to see what is going on at runtime, but uses more code space. Dynamic events allow the creation of a spy at runtime. This is not always necessary, but can be enabled with EVENT_DYNAMIC if needed. A 'test' event is the only option for now. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-09net: phy: Add support for ethernet-phy-id with gpio resetMichal Simek
Ethernet phy like dp83867 is using strapping resistors to setup PHY address. On Xilinx boards strapping is setup on wires which are connected to SOC where internal pull ups/downs influnce phy address. That's why there is a need to setup pins properly (via pinctrl driver for example) and then perform phy reset. I can be workarounded by reset gpio done for mdio bus but this is not working properly when multiply phys sitting on the same bus. That's why it needs to be done via ethernet-phy-id driver where dt binding has gpio reset per phy. DT binding is available here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/net/ethernet-phy.yaml The driver is are reading the vendor and device id from valid phy node using ofnode_read_eth_phy_id() and creating a phy device. Kconfig PHY_ETHERNET_ID symbol is used because not every platform has gpio support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Link: https://lore.kernel.org/r/70ab7d71c812b2c972d48c129e416c921af0d7f5.1645627539.git.michal.simek@xilinx.com
2022-03-09net: phy: Remove static return type for phy_device_create()Michal Simek
Remove static return type for phy_device_create() to avoid file scope for this function. Also add required prototype in phy.h. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Link: https://lore.kernel.org/r/1517f4053403fbd53e899d500e7485d068a4f0b6.1645627539.git.michal.simek@xilinx.com
2022-03-09net: phy: Add new read ethernet phy id functionMichal Simek
Add new function to get ethernet phy id from compatible property of the mdio phy node. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Link: https://lore.kernel.org/r/16019efb3820a50330935fdaae191cec1f101b5c.1645627539.git.michal.simek@xilinx.com
2022-03-09lib: div64: Add support for round up of div64_u64Ashok Reddy Soma
Most of the frequencies are not rounded up to a proper number. When we need to devide these frequencies to get a number for example frequency in Mhz, we see it as one less than the actual intended value. Ex: If we want to get Mhz from frequency 199999994hz, we will calculate it using div64_u64(199999994, 1000000) and we will get 199Mhz in place of 200Mhz. Add a macro DIV64_U64_ROUND_UP for rounding up div64_u64. This is taken from linux 'commit 68600f623d69("mm: don't miss the last page because of round-off error")'. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f9fdcba76cd692ae436b1d7883b490e3dc207231.1645626962.git.michal.simek@xilinx.com
2022-03-09firmware: zynqmp: Add support for set sd config and is function supportedAshok Reddy Soma
Add firmware API's to set SD configuration and to check if a purticular function is supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f64fa2f73e4775e9ad2f4d91339d6c74b43116a3.1645626962.git.michal.simek@xilinx.com
2022-03-09firmware: zynqmp: Add and update firmware enumsAshok Reddy Soma
Update enum pm_ioctl_id with more IOCTLs. Add enum pm_sd_config_type to support dynamic sd configuration. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/9aba090ec11d2591dbe6978e73e64384873c99fc.1645626962.git.michal.simek@xilinx.com
2022-03-07bcm96753ref: add initial supportPhilippe Reynes
This add the initial support of the broadcom reference board bcm96753ref with a bcm6753 SoC. This board has 1 GB of RAM, 256 MB of flash (nand), 2 USB port, 1 UART, and 4 ethernet ports. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2022-03-07dm: pinctrl: Use explicit values for enumsAshok Reddy Soma
Based on discussion at https://lore.kernel.org/r/20200318125003.GA2727094@kroah.com we got recommendation to use explicit values for all enums. So, add explicit values to all pinctrl related enums for readability. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/dcdb20e7252ea7465e9f984d815e9624c30e9558.1645624969.git.michal.simek@xilinx.com
2022-03-04configs: ti: use standard configuration nodes namingRomain Naour
Currently, any u-boot bootloader for ti armv7 platforms using DEFAULT_FIT_TI_ARGS to boot with a fitimage (boot_fit = 1) doesn't boot when built with Yocto Poky (openembedded-core). ## Loading kernel from FIT Image at 90000000 ... Could not find configuration node ERROR: can't get kernel image! Arago forked the kernel-fitimage class [1] and altered the configuration nodes naming while adding the OPTEE support by using FITIMAGE_CONF_BY_NAME by default [2]. The "upstream" kernel-fitimage class from openembedded-core still add the "conf-" prefix for each configuration nodes [3]. The ITS file format (from doc/uImage.FIT/source_file_format.txt) is not really accurate with the expected naming of these nodes. But in practice the "conf-" prefix is widely used. When the FIT image support has been added for ti armv7 platforms the naming from Arago has been used [3]. Fix this issue by adding the prefix expected by the ITS file generated by kernel-fitimage class from openembedded-core. [1] http://arago-project.org/git/meta-arago.git?p=meta-arago.git;a=commitdiff;h=719ab1b2098bcdc59c249e3529fa82cb1b9130e6 [2] http://arago-project.org/git/meta-arago.git?p=meta-arago.git;a=commitdiff;h=f23f2876a0cda89241d031bb7ba0b4256ed90035 [3] https://git.openembedded.org/openembedded-core/tree/meta/classes/kernel-fitimage.bbclass?h=yocto-3.1.13#n290 [3] 1e93cc8473e4fe018aececc8ed3bf8fc2b3ff561 Signed-off-by: Romain Naour <romain.naour@smile.fr> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
2022-03-03Convert CONFIG_CHIP_SELECTS_PER_CTRL to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CHIP_SELECTS_PER_CTRL Cc: Alison Wang <alison.wang@nxp.com> Cc: Pramod Kumar <pramod.kumar_1@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOOTP_MAY_FAIL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03powerpc: P1010RDB: Move CONFIG_BOOTMODE out of CONFIG namespaceTom Rini
This slight environment modification shouldn't be in the CONFIG namespace, change it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOOTFILE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOARD_POSTCLK_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_POSTCLK_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOARD_ECC_SUPPORT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_ECC_SUPPORT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BIOSEMU to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BIOSEMU Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOARD_COMMON to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_COMMON Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIGTom Rini
These particular values are not configurable and today we always set CONFIG_SECURE_BL1_ONLY. Move these to where they're used in the code, and drop from the CONFIG namespace. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-03-03Convert CONFIG_BTB to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BTB Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03powerpc: Remove unused MPC8540/60ADS codeTom Rini
Remove some code, primarily CPM2 related, that is now unused since the removal of MPC8540/60ADS. Fixes 3913191c8a6b ("powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADS") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-03Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
Update and fixes for sl28, lx2, pblimage generation for some powerpc products
2022-03-02clk: scmi: register scmi clocks with CCFEtienne Carriere
Implements SCMI APIs to retrieve the number exposed SCMI clocks using SCMI_PROTOCOL_ATTRIBUTES messages and the names of the clocks using SCMI_CLOCK_ATTRIBUTES messages. This change updates sandbox SCMI clock test driver to manage these 2 new message IDs. Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Clement Leger <clement.leger@bootlin.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-02scmi: change parameter dev in devm_scmi_process_msgEtienne Carriere
Changes devm_scmi_process_msg() first argument from target parent device to current SCMI device and lookup the SCMI agent device among SCMI device parents for find the SCMI agent operator needed for communication with the firmware. This change is needed in order to support CCF in clk_scmi driver unless what CCF will fail to find the right udevice related to exposed SCMI clocks. This patch allows to simplify the caller sequence, using SCMI device reference as parameter instead of knowing SCMI uclass topology. This change also adds some protection in case devm_scmi_process_msg() API function is called for an invalid device type. Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-02-28arm: apple: Switch to fully dynamic mem layoutJanne Grunau
Support for Apple M1 Pro and Max will allow using a single binary for all M1 SoCs. The M1 Pro/Max have a different memory layout. The RAM start address is 0x100_0000_0000 instead of 0x8_0000_0000. Replace the hardcoded memory layout with dynamic initialized environment variables in board_late_init(). Tested on Mac Mini (2020) and Macbook Pro 14-inch (2021). Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2022-02-28lx2160a: Fix distroboot device list for configs without USB/SCSI/etcDaniel Klauer
The BOOT_TARGET_DEVICES list for distro_bootcmd was hard-coded to assume that all boot devices are available/enabled in the configuration, thus ignoring the actual config settings. The config_distro_bootcmd.h header file specifically has compile-time checks to detect such problems. To allow disabling USB, SCSI, etc. in custom lx2160a board configs, make it depend on the config settings and use only the enabled features. Signed-off-by: Daniel Klauer <daniel.klauer@gin.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 01:45:48 +0000