aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-07-17configs: am65x_evm: Add support for applying overlaysAndreas Dannenberg
This will allow for downloading and applying overlays from an MMC/SD boot media based on the overlay_files ENV variable containing a list of overlay files. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17board: ti: am654: Use EEPROM-based board detectionAndreas Dannenberg
The TI AM654x EVM base board and the associated daughtercards have on- board I2C-based EEPROMs containing board configuration data. Use the board detection infrastructure introduced earlier to do the following: 1) Parse the AM654x EVM base board EEPROM and populate items like board name and MAC addresses into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing the associated presence signals via an I2C-based GPIO expander. Then, if such a card is found, parse the data such as additional Ethernet MAC addresses from its on-board EEPROM and populate into U-Boot accordingly 3) Dynamically create an U-Boot ENV variable called overlay_files containing a list of daugherboard-specific DTB overlays based on daughercards found. This patch adds support for the AM654x base board ("AM6-COMPROCEVM") as well as for the IDK ("AM6-IDKAPPEVM"), OLDI LCD ("OLDI-LCD1EVM") PCIe/USB3.0 ("SER-PCIEUSBEVM"), 2 Lane PCIe/USB2.0 ("SER-PCIE2LEVM"), and general purpuse ("AM6-GPAPPEVM") daughtercards. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-17configs: am65x_evm: Add Support for eMMC bootFaiz Abbas
Add configs to support RAW boot mode in eMMC. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17armv7R: K3: am654: Use full malloc implementation in SPLAndreas Dannenberg
Switch to using the full malloc scheme in post-relocation SPL to allow better utilization of available memory for example by allowing memory to get freed. Initially allocate a 16MB-sized region in DDR starting at address 0x84000000 for this purpose. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17armV7R: K3: am654: Allow using SPL BSS pre-relocationAndreas Dannenberg
In order to be able to use more advanced driver functionality which often relies on having BSS initialized during early boot prior to relocation several things need to be in place: 1) Memory needs to be available for BSS to use. For this, we locate BSS at the top of the MCU SRAM area, with the stack starting right below it, 2) We need to move the initialization of BSS prior to entering board_init_f(). We will do this with a separate commit by turning on the respective CONFIG option. In this commit we also clean up the assignment of the initial SP address as part of the refactoring, taking into account the pre-decrement post- increment nature in which the SP is used on ARM. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-07-17spl: Make image loader infrastructure more universalAndreas Dannenberg
The current U-Boot SPL image loader infrastructure is very powerful, able to initialize and load from a variety of boot media however it is strongly geared towards loading specific types of images in a very specific way. To address the need being able to use this infrastructure to load arbitrary image files go ahead and refactor it as follows: - Refactor existing spl_mmc_load_image function into superset function, accepting additional arguments such as filenames and media load offset (same concept can also be applied toother spl_XXX_load_image functions) - Extend the loader function to "remember" their peripheral initialization status so that the init is only done once during the boot process, - Extend the FIT image loading function to allow skipping the parsing/ processing of the FIT contents (so that this can be done separately in a more customized fashion) - Populate the SPL_LOAD_IMAGE_METHOD() list with a trampoline function, invoking the newly refactored superset functions in a way to maintain compatibility with the existing behavior This refactoring initially covers MMC/SD card loading (RAW and FS-based). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17am65x_evm: Add Support for creating a filesystem GPT partition in eMMCFaiz Abbas
Add Support for creating a GPT partition for the filesystem in eMMC. The filesystem is created in the user partition (partition 0). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17configs: am65x: Add configs to support environment in eMMCFaiz Abbas
Add configs such that U-boot environment is in eMMC by default. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timingsFaiz Abbas
The HOST_CONTROL2 register is a part of SDHC v3.00 and not just specific to arasan/zynq controllers. Add the same to sdhci.h. Also create a common API to set UHS timings in HOST_CONTROL2. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17mmc: sdhci: Make set_ios_post() return intFaiz Abbas
Make set_ios_post() return int to faciliate error handling in platform drivers. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2019-07-17mmc: sdhci: Make sdhci_set_clock() non staticFaiz Abbas
The am654_sdhci driver needs to switch the clock off before disabling its phy dll and needs to re-enable the clock before enabling the phy again. Therefore, make the sdhci_set_clock() function accessible in the am654_sdhci driver. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17regmap: Add API regmap_init_mem_index()Faiz Abbas
In device nodes with more than one entry in the reg property, it is sometimes useful to regmap only of the entries. Add an API regmap_init_mem_index() to facilitate this. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-16Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Beelink-x2 STB support (Marcus) - H6 DDR3, LPDDR3 changes (Andre, Jernej) - H6 pin controller, USB PHY (Andre)
2019-07-16sunxi: move SUNXI_GPIO to KconfigAndre Przywara
Probably for no particular reason SUNXI_GPIO was still defined the "old way", in header files only. Introduce SUNXI_GPIO to the Kconfig file in drivers/gpio to remove another line from our dreadful config_whitelist.txt. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64 Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-15Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini
2019-07-15net: introduce MDIO DM class for MDIO devicesAlex Marginean
Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as stand-alone devices. Useful in particular for systems that support DM_ETH and have a stand-alone MDIO hardware block shared by multiple Ethernet interfaces. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-15Merge tag 'mmc-2019-7-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- mmc spi driver model support - drop mmc_spi command - enhanced Strobe mmc HS400 support - minor mmc bug/fixes and optimization - omap hsmmc and mvbeu update - sdhci card detect support
2019-07-15mmc: support hs400 enhanced strobe modePeng Fan
eMMC 5.1+ supports HS400 Enhances Strobe mode without the need for tuning procedure. The flow is as following: - set HS_TIMIMG (Highspeed) - Host change freq to <= 52Mhz - set the bus width to Enhanced strobe and DDR8Bit(CMD6), EXT_CSD[183] = 0x86 instead of 0x80 - set HS_TIMING to 0x3 (HS400) - Host change freq to <= 200Mhz - Host select HS400 enhanced strobe complete Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-07-15cmd: Remove mmc_spi commandAnup Patel
The mmc_spi command was added to manually setup MMC over SPI bus using command. This was required by the legacy non-DM MMC_SPI driver. With DM based MMC_SPI driver in-place, we can now use all general storge commands and mmc command for MMC over SPI bus hence we remove the mmc_spi command all it's references. Suggested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15mmc: When switching partition, use the timeout specified in the ext_csdJean-Jacques Hiblot
The e-MMC spec allows the e-MMC to specify a timeout for the partition switch command. It can take up to 2550 ms. There is no lower limit to this value in the spec, but do as the the linux driver does and force it to be at least 300ms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15mmc: use the generic timeout for cmd6 (SWITCH) provided in the ext_csdJean-Jacques Hiblot
Starting with rev 4.5, the eMMC can define a generic timeout for the SWITCH command. Following Linux Kernel code, the timeout also changed from 1000 -> 500 Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15mmc: if possible, poll the busy state using DAT0Jean-Jacques Hiblot
Using the DAT0 line as a rdy/busy line is an alternative to reading the status register of the card. It especially useful in situation where the bus is not in a good shape, like when modes are switched. This is also how the linux driver behaves. Note of warning: As per the specification, while polling on DAT0 the CLK must not turned off: "[...] Without a clock edge the Device (unless previously disconnected by a deselect command (CMD7)) will force the DAT0 line down, forever. [...]" Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15Revert "mmc: Add a new callback function to perform the 74 clocks cycle ↵Jean-Jacques Hiblot
sequence" This reverts commit 318a7a576bc49aa8b4207e694d3fbd48c663d6ac. The last and only user of this callback had been the omap_hsmmc driver. It is not used anymore. Removing the callback. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-07-15mmc: Read sd card detect properties from DTT Karthik Reddy
This patch reads card detect properties from device tree & added mmc capability macros in mmc.h. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-15mmc: mvebu: Remove unused MMC_CAP.. macrosT Karthik Reddy
Removed MMC_CAP_NONREMOVABLE, MMC_CAP_NEEDS_POLL macros from mvebu_mmc.h to avoid redefining of these macros when compiled with mvebu based configs. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-14Merge tag 'u-boot-stm32-20190712' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - syscon: add support for power off - stm32mp1: add op-tee config - stm32mp1: add specific commands: stboard and stm32key - add stm32 mailbox driver - solve many stm32 warnings when building with W=1 - update stm32 gpio driver
2019-07-13gpio: add gpio-hog supportHeiko Schocher
add gpio-hog support. GPIO hogging is a mechanism providing automatic GPIO request and configuration as part of the gpio-controller's driver probe function. for more infos see: doc/device-tree-bindings/gpio/gpio.txt Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Michal Simek <michal.simek@xilinx.com> (zcu102) Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-13ARM: am335x: Add phyCORE AM335x R2 supportNiel Fourie
Support for Phytech phyCORE AM335x R2 SOM (PCL060) on the Phytec phyBOARD-Wega AM335x. CPU : AM335X-GP rev 2.1 Model: Phytec AM335x phyBOARD-WEGA DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 eth0: ethernet@4a100000 Working: - Eth0 - i2C - MMC/SD - NAND - UART - USB (host) Device trees were taken from Linux mainline: commit 37624b58542f ("Linux 5.1-rc7") Signed-off-by: Niel Fourie <lusus@denx.de> Signed-off-by: Parthiban Nallathambi <pn@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Marek Vasut <marex@denx.de>
2019-07-13ARM: legoev3: convert to driver modelDavid Lechner
This converts LEGO MINDSTORMS EV3 to the driver model. MMC, SERIAL, SPI and SPI_FLASH are converted. The device tree contains only the minimal nodes required by U-Boot since the size of U-Boot is limited to 256K on this device. Signed-off-by: David Lechner <david@lechnology.com>
2019-07-13ARM: omap3: evm: Enable DM_USB in defconfigDerald D. Woods
This addresses the following warning message: ===================== WARNING ====================== This board does not use CONFIG_DM_USB. Please update the board to use CONFIG_DM_USB before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== As USB support for older OMAP3 SoC's improves, OMAP3 EVM can be readily adapted. There is some additional 'gpio-hog' support needed to fully setup USB in a similar manner to Linux. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2019-07-12stm32mp1: Add UBIFS boot capabilityPatrick Delaunay
Add support for boot from NAND in generic ditribution command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: add configuration op-teePatrick Delaunay
Add support of Trusted boot chain with OP-TEE - reserved 32MB at the end of the DDR for OP-TEE Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: reorder some CONFIG in stm32mp1.hPatrick Delaunay
Change config not directly linked to CONFIG_DISTRO_DEFAULTS. Allow to deactivate CONFIG_SYS_MTDPARTS_RUNTIME when CONFIG_MTDPARTS_DEFAULT is defined in defconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: force boot_net_usb_startPatrick Delaunay
Prevent USB enumeration and avoid unnecessary delay in bootcmd_pxe as Ethernet device is not attached to USB. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: add check for presence of environment in boot devicePatrick Delaunay
For boot from flash, check presence of default environment to force save env. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12dt-bindings: pinctrl: stm32: add new entry for package informationPatrick Delaunay
Add "st,package" entry. Possibles values are: -STM32MP_PKG_AA for LFBGA448 (18*18) package -STM32MP_PKG_AB for LFBGA354 (16*16) package -STM32MP_PKG_AC for TFBGA361 (12*12) package -STM32MP_PKG_AD for TFBGA257 (10*10) package see Linux commit 966d9b928f626a54a0c27c0fdae1e3dfe9bab416 for v5.2-rc1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12stm32mp1: move CONFIG_ENV in KconfigPatrick Delaunay
Move 2 ENV configuration flags in board Kconfig - CONFIG_ENV_SECT_SIZE - CONFIG_ENV_OFFSET Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-11Merge tag 'dm-pull-9jul19-take2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm - Sandbox improvements including .dts refactor - Minor tracing and PCI improvements - Various other minor fixes - Conversion of patman, dtoc and binman to support Python 3
2019-07-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- SPL SATA enhancements to allow booting from RAW SATA device needed for Clearfog (Baruch) - Enable SATA booting on Clearfog (Baruch) - Misc changes to Turris Omnia (Marek) - Enable CMD_BOOTZ and increase SYS_BOOTM_LEN on crs305-1g-4s (Luka) - Enable FIT support for db-xc3-24g4xg (Chris) - Enable DM_SPI on Keymile Kirkwood board with necessary changes for this (Pascal) - Set 38x and 39x AVS on lower frequency (Baruch)
2019-07-11Merge tag 'uniphier-v2019.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2019.10 - import DT updates from Linux - add UniPhier SPI controller driver - make U-Boot image for 64bit SoCs position independent - tidy up various init code for next generation SoCs - misc cleanups
2019-07-11include: android_bootloader_message.h: Minimize the diff to AOSPEugeniu Rosca
Perform the following updates: - Relocate the commit id from the file to the description of U-Boot commit. The AOSP commit is c784ce50e8c10eaf70e1f97e24e8324aef45faf5. This is done to avoid stale references in the file itself. The reasoning is in https://patchwork.ozlabs.org/patch/1098056/#2170209. - Minimize the diff to AOSP, to decrease the effort of the next AOSP backports. The background can be found in: https://patchwork.ozlabs.org/patch/1080394/#2168454. - Guard the static_assert() calls by #ifndef __UBOOT__ ... #endif, to avoid compilation failures of files including the header. Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-11configs: Rename CONFIG_IMAGE_FORMAT_LEGACY to CONFIG_LEGACY_IMAGE_FORMATTom Rini
The name CONFIG_LEGACY_IMAGE_FORMAT reads slightly better along with allowing us to avoid a rather nasty Kbuild/Kconfig issue down the line with CONFIG_IS_ENABLED(IMAGE_FORMAT_LEGACY). In a few places outside of cmd/ switch to using CONFIG_IS_ENABLED() to test what is set. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-11drivers: pci_ep: Introduce UCLASS_PCI_EP uclassRamon Fried
Introduce new UCLASS_PCI_EP class for handling PCI endpoint devices, allowing to set various attributes of the PCI endpoint device, such as: * configuration space header * BAR definitions * outband memory mapping * start/stop PCI link Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-11km/spi: remove deprecated SPI flash driver code for KM Kirkwood boardsPascal Linder
KM Kirkwood boards now implement the driver model for its SPI flash interface. Therefore, the old board specific claim and release functions can be deleted. The preprocessor definition CONFIG_SYS_KW_SPI_MPP is yet unused as well. All its appearances and dependencies are removed in the kirkwood_spi driver, header files and finally the configuration whitelist. Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch> Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: crs305-1g-4s: Enable CMD_BOOTZ and increase SYS_BOOTM_LENLuka Kovacic
This change enables CMD_BOOTZ and increases SYS_BOOTM_LEN to make it easier to work with kernel images. Signed-off-by: Luka Kovacic <me@lukakovacic.xyz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: turris_omnia: prefer SCSI booting before USBMarek Behún
If SCSI and USB boot options are both available, try to boot from SCSI first. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: turris_omnia: remove unneeded macro from board configMarek Behún
This is not needed here since Omnia is using DM_PCI now. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: turris_omnia: change environment address in SPI flashMarek Behún
The U-Boot partition is 1 MiB and environment is 64 KiB. It does not make sense to have environment at 0xc0000 when it could be at 0xf0000 and we can have more space for U-Boot binary. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: turris_omnia: set default ethernet adapterMarek Behún
Set default value for the ethact variable to the WAN port. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2019-07-11arm: mvebu: clearfog: set U-Boot offset for SATA bootBaruch Siach
See the offset of U-Boot in raw SATA disk to the same value as the MMC offset. That is 0x140 sectors from the beginning of the SPL, which is 0x141 sectors from the beginning of the device (after the MBR sector). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 11:10:59 +0000