aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-07-07Convert CONFIG_USB_XHCI_EXYNOS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_XHCI_EXYNOS CONFIG_USB_EHCI_EXYNOS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-06common: spl: spl_spi: add support for dynamic override of sf busVaishnav Achath
Currently the SPI flash to load from is defined through the compile time config CONFIG_SF_DEFAULT_BUS and CONFIG_SF_DEFAULT_CS, this prevents the loading of binaries from different SPI flash using the same build.E.g. supporting QSPI flash boot and OSPI flash boot on J721E platform is not possible due to this limitation. This commit adds lookup functions spl_spi_boot_bus() and spl_spi_boot_cs for identifying the flash device based on the selected boot device, when not overridden the lookup functions are weakly defined in common/spl/spl_spi.c. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2022-07-05Convert CONFIG_KIRKWOOD_PCIE_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KIRKWOOD_EGIGA_INIT CONFIG_KIRKWOOD_PCIE_INIT CONFIG_KIRKWOOD_RGMII_PAD_1V8 CONFIG_KM_DISABLE_PCIE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05qemu-ppce500: Move CONFIG_SYS_PCI_MAP_{START, END} to board codeTom Rini
These CONFIG options are only used on this board, in the board file itself. Remove these from the CONFIG namespace and define in the board file. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_MSC01 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_MSC01 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05socrates: Rework CONFIG_PCI_CLK_FREQTom Rini
The symbol CONFIG_PCI_CLK_FREQ is local to this board. Provide equal clarity in the code by referencing the numeric value directly and move the explanatory comment to the code, just prior to use. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SH7751_PCI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SH7751_PCI Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05MPC837XERDB: Remove unused PCI definesTom Rini
These defines aren't referenced in code today, remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_CONFIG_HOST_BRIDGE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_CONFIG_HOST_BRIDGE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_GT64120 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_GT64120 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCI_SCAN_SHOW to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_SCAN_SHOW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05pci: Remove pci_sh4 and related defines.Tom Rini
This driver is not enabled anywhere, remove it. Also remove definitions of symbols only used in this driver, on platforms that did not enable it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE_IMX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE_IMX Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_PCIE1 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE1 CONFIG_PCIE2 CONFIG_PCIE3 CONFIG_PCIE4 CONFIG_PCI1 Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_LAYERSCAPE_NS_ACCESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LAYERSCAPE_NS_ACCESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05lcd: Remove legacy CONFIG_FB_ADDR codeTom Rini
No platforms set both CONFIG_LCD and CONFIG_FB_ADDR at this time, drop this legacy code. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_FIXED_MMC_LOCATION CONFIG_ESDHC_HC_BLK_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05powerpc: Clean up CHAIN_OF_TRUST related optionsTom Rini
As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05nxp: config_fsl_chain_trust.h: Clean up and remove unused portionsTom Rini
The way that secure boot is implemented today on NXP ARM platforms does not reuse the elements found in include/config_fsl_chain_trust.h to construct CONFIG_SECBOOT but instead board header files have their environment setup as needed and then fsl_setenv_chain_of_trust() will set secureboot in the environment. Remove a large number of unused defines here. Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_FSL_SFP_BE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_FSL_SEC_MON et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_SEC_MON CONFIG_SYS_FSL_SEC_MON_BE CONFIG_SYS_FSL_SEC_MON_LE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_ESDHC_DETECT_QUIRK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ESDHC_DETECT_QUIRK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_EXTRA_CLOCK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_EXTRA_CLOCK Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_DDR_RAW_TIMING to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_DDR_RAW_TIMING Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SYS_SPD_BUS_NUM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPD_BUS_NUM Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_USB_GADGET_DWC2_OTG_PHY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_GADGET_DWC2_OTG_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_USE_ONENAND_BOARD_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_ONENAND_BOARD_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_SAMSUNG_ONENAND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SAMSUNG_ONENAND Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05Rename CONFIG_PWM to CONFIG_PWM_S5P and move to KconfigTom Rini
We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to Kconfig. Given the usage of CONFIG_PWM_NX, we have that select this new symbol. Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-07-05smdkc100: Remove some unused optionsTom Rini
There are a few options we test and set and then never reference, remove them. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05nxp: Cleanup some emulator related options.Tom Rini
- Drop the emulator CONFIG test from include/configs/ls1088ardb.h - Migrate CONFIG_SYS_FSL_DDR_EMU to a select'able option in drivers/ddr/fsl/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05watchdog: designware: Make this depend on WDTTom Rini
As this driver can dynamically determine the values set in CONFIG_DW_WDT_BASE when using WDT, so make this depend on WDT rather than migrate CONFIG_DW_WDT_BASE to Kconfig. Cc: Chee Tien Fong <tien.fong.chee@intel.com> Cc: Chin-Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinh.nguyen@intel.com> Cc: Holger Brunck <holger.brunck@hitachienergy.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marek Vasut <marex@denx.de> Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com> Cc: Stefan Roese <sr@denx.de> Cc: hee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-07-05Convert CONFIG_ENABLE_36BIT_PHYS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENABLE_36BIT_PHYS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05net: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBLTom Rini
This value is always used at the default, rename it for now. This likely should come from the device tree if non-default, moving forward. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-05Convert CONFIG_DW_ALTDESCRIPTOR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DW_ALTDESCRIPTOR Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-03board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC cardPali Rohár
From whole P1/P2 family of RDB boards is TDM-PMC card (PCI Mezzanine Card, Freescale PQ-MDS-T1) available only on P1021RDB and P1025RDB boards. So address mapping for TDM-PMC card on LBC should not be enabled on any other P1/P2 RDB board as there is no device at that TDM-PMC address. Support for P1021RDB and P1025RDB boards was already removed from mainline U-Boot in commits 6d1dd76afe85 ("board/freescale: Remove P1021RDB board support") and d521cece5adb ("board/freescale: Remove P1025RDB board support"). So do not enable TDM-PMC address mapping on remaining P1/P2 RDB boards and remove all macros related to TDM-PMC address mappings. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-06-30Merge tag 'u-boot-at91-2022.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.10 cycle: This feature set includes mostly fixes and alignments: DT alignment with Linux for sama7g5, removal of invalid eeprom compatibles, removal of extra debug_uart_init calls for all at91 boards, support for pio4 driver pioE bank, and other minor fixes and enhancements for sam9x60 and sama5d2_icp boards.
2022-06-30Merge tag 'versal-qspi-for-v2022.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Versal QSPI/OSPI changes for v2022.10 - Add new flash types - Add cadence ospi driver for Xilinx Versal
2022-06-29spi: cadence_qspi: Enable apb linear mode for apb read & write operationsT Karthik Reddy
On versal platform, enable apb linear mode for apb read and write execute operations amd disable it when using dma reads. This is done by xilinx_pm_request() secure calls when CONFIG_ZYNQMP_FIRMWARE is enabled, else we use direct raw reads and writes in case of mini U-Boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-5-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-29spi: cadence-qspi: reset qspi flash for versal platformT Karthik Reddy
When flash operated at non default mode like DDR, flash need to be reset to operate in SDR mode to read flash ids by spi-nor framework. Reset the flash to the default state before using the flash. This reset is handled by a gpio driver, in case of mini U-Boot as gpio driver is disabled, we do raw read and write access by the registers. Versal platform utilizes spi calibration for read delay programming, so incase by default read delay property is set in DT. We make sure not to use read delay from DT by overwriting read_delay with -1. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Link: https://lore.kernel.org/r/20220512100535.16364-4-ashok.reddy.soma@xilinx.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-28gw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXTTom Rini
Move the environment text over from being set via CONFIG_EXTRA_ENV_SETTINGS in include/configs/gw_ventana.h and over to plain text in board/gateworks/gw_ventana/gw_ventana.env. This lets us drop CONFIG_EXTRA_ENV_SETTINGS_COMMON as everything resides in a single environment file now. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
2022-06-28Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environmentTom Rini
- Ensure that everyone setting mtdids= and mtdparts= is doing so via the CONFIG options. - If the CONFIG options are set, ensure that the default environment sets mtdparts / mtdids. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOADTom Rini
The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28opos6uldev: Migrate to using CONFIG_EXTRA_ENV_TEXTTom Rini
Move the environment text over from being set via CONFIG_EXTRA_ENV_SETTINGS in include/configs/opos6uldev.h and over to plain text in board/armadeus/opos6uldev/opos6uldev.env. This lets us manage env_version without a CONFIG variable. Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_ENV_RANGE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_RANGE Now that this is in Kconfig we can enforce a minimum size and so remove the check in C code to ensure range is larger than size. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28dragonboard410c: Migrate to using CONFIG_EXTRA_ENV_TEXTTom Rini
With the exception of distro_boot support, we can move all of the rest of the environment changes to come from CONFIG_EXTRA_ENV_TEXT and in turn remove CONFIG_ENV_REFLASH. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28env: Do not make CONFIG_EXTRA_ENV_TEXT and CONFIG_EXTRA_ENV_SETTINGS conflictTom Rini
Largely, the use of CONFIG_EXTRA_ENV_SETTINGS can be migrated directly to come from CONFIG_EXTRA_ENV_TEXT. The biggest case that cannot easily be migrated is distro_bootcmd support. Rather than block migration on this, remove the #error here so that we can being moving forward. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_SYS_USB_FAT_BOOT_PARTITION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_USB_FAT_BOOT_PARTITION Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 15:33:23 +0000