aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-03-03Convert CONFIG_CHIP_SELECTS_PER_CTRL to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CHIP_SELECTS_PER_CTRL Cc: Alison Wang <alison.wang@nxp.com> Cc: Pramod Kumar <pramod.kumar_1@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOOTP_MAY_FAIL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03powerpc: P1010RDB: Move CONFIG_BOOTMODE out of CONFIG namespaceTom Rini
This slight environment modification shouldn't be in the CONFIG namespace, change it. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOOTFILE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOARD_POSTCLK_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_POSTCLK_INIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOARD_ECC_SUPPORT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_ECC_SUPPORT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BIOSEMU to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BIOSEMU Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03Convert CONFIG_BOARD_COMMON to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_COMMON Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIGTom Rini
These particular values are not configurable and today we always set CONFIG_SECURE_BL1_ONLY. Move these to where they're used in the code, and drop from the CONFIG namespace. Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2022-03-03Convert CONFIG_BTB to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BTB Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03powerpc: Remove unused MPC8540/60ADS codeTom Rini
Remove some code, primarily CPM2 related, that is now unused since the removal of MPC8540/60ADS. Fixes 3913191c8a6b ("powerpc: mpc8540ads: mpc8560ads: Drop support for MPC8540/60ADS") Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-02clk: scmi: register scmi clocks with CCFEtienne Carriere
Implements SCMI APIs to retrieve the number exposed SCMI clocks using SCMI_PROTOCOL_ATTRIBUTES messages and the names of the clocks using SCMI_CLOCK_ATTRIBUTES messages. This change updates sandbox SCMI clock test driver to manage these 2 new message IDs. Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Clement Leger <clement.leger@bootlin.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-02scmi: change parameter dev in devm_scmi_process_msgEtienne Carriere
Changes devm_scmi_process_msg() first argument from target parent device to current SCMI device and lookup the SCMI agent device among SCMI device parents for find the SCMI agent operator needed for communication with the firmware. This change is needed in order to support CCF in clk_scmi driver unless what CCF will fail to find the right udevice related to exposed SCMI clocks. This patch allows to simplify the caller sequence, using SCMI device reference as parameter instead of knowing SCMI uclass topology. This change also adds some protection in case devm_scmi_process_msg() API function is called for an invalid device type. Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-02-28arm: apple: Switch to fully dynamic mem layoutJanne Grunau
Support for Apple M1 Pro and Max will allow using a single binary for all M1 SoCs. The M1 Pro/Max have a different memory layout. The RAM start address is 0x100_0000_0000 instead of 0x8_0000_0000. Replace the hardcoded memory layout with dynamic initialized environment variables in board_late_init(). Tested on Mac Mini (2020) and Macbook Pro 14-inch (2021). Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
2022-02-25clk: Add clk_get_by_name_optionalSean Anderson
This adds a helper function for clk_get_by_name in cases where the clock is optional. Hopefully this helps point driver writers in the right direction. Also convert some existing users. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20220115205247.566210-2-seanga2@gmail.com
2022-02-25clk: Add driver API to HTML docsSean Anderson
This converts the existing driver API docs (clk-uclass.h) to kernel doc format and adds them to the HTML documentation. Because the kernel doc sphinx converter does not handle functions in structs very well, the individual methods are documented separately. This is primarily inspired by the phylink documentation [1], which uses this trick extensively. [1] https://www.kernel.org/doc/html/latest/networking/kapi.html#c.phylink_mac_ops Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20211222171114.3091780-5-seanga2@gmail.com
2022-02-25clk: Add client API to HTML docsSean Anderson
This converts the existing client (aka clk.h) documentation to kernel doc format, and adds it to the HTML docs. I have tried to preserve existing comments as much as possible, refraining from semantic changes. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20211222171114.3091780-4-seanga2@gmail.com [rebased onto u-boot/master and resolved conflicts] Signed-off-by: Sean Anderson <seanga2@gmail.com>
2022-02-24clk: Inline clk_get_*_optionalSean Anderson
The optional varients of clk_get_* functions are just simple wrappers. Reduce code size a bit by inlining them. On platforms where it is not used (most of them), it will not be compiled in any more. On platforms where they are used, the inlined branch should not cause any significant growth. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20211222171114.3091780-3-seanga2@gmail.com
2022-02-24clk: Rename clk_get_optional_nodevSean Anderson
This normalizes the name of this accessor function to put "_optional" last. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20211222171114.3091780-2-seanga2@gmail.com
2022-02-22spl: x86: Correct the binman symbols for SPLSimon Glass
These symbols are incorrect, meaning that binman cannot find the associated entry. This leads to errors like: binman: Section '/binman/simple-bin': Symbol '_binman_spl_prop_size' in entry '/binman/simple-bin/u-boot-spl/u-boot-spl-nodtb': Entry 'spl' not found in list (mkimage,u-boot-spl-nodtb, u-boot-spl-bss-pad,u-boot-spl-dtb,u-boot-spl,u-boot-img,main-section) Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-21Merge tag 'xilinx-for-v2022.04-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc3 microblaze: - Fix exception handler zynqmp: - Show information about secure images - DT changes (som u-boot file removal) - Fix zynqmp_pm_cfg_obj_convert.py - Fix platform boot xilinx: - Fix bootm_size calculation - Remove GPIO_EXTRA_HEADER selection power: - Add zynqmp power management driver scsi: - Add phy support to ceva driver zynq qspi: - Fix unaligned accesses and check baudrate setup - Add support for spi memory operations net: - Fix 64bit calculation in axi_emac video: - Add missing gpio dependency for seps driver
2022-02-19kontron-sl-mx8mm: change environment address variablesHeiko Thiery
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB. To have enought space to load kernel images bigger than 32MB change the variables to a feasible value. The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h". The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have the same value as for the kernel_addr_r. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <michael@walle.cc>
2022-02-19colibri-imx6ull: improve env badblock managementFrancesco Dolcini
Use the complete 512kb (4 blocks) nand partition reserved for u-boot environment instead of just the first block, this allows the module to have a working environment even if 3 blocks are bad. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-19board: gateworks: venice: config file cleanupsTim Harvey
Clean up config file: - remove unnecessary IMX_FEC_BASE - remove unnecessary comment - remove ipaddr/serverip from env Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19board: gateworks: venice: add imx8mn-gw7902 supportTim Harvey
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring: - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller - LTE CAT M1 modem - USB 2.0 HUB - M.2 Socket with USB2.0, PCIe, and dual-SIM - IMX8M FEC - PCIe based GbE - RS232/RS485/RS422 serial transceiver - GPS - CAN bus - WiFi / Bluetooth - MIPI header (DSI/CSI/GPIO/PWM/I2S) - PMIC To add support for the i.MX8M Nano GW7902: - Add imx8mn-venice dts/defconfig/include - Add imx8mn-gw7902 dts - Add imx8mn-2gb lpddr4 dram configs - Add misc support for IMX8M Nano SoC - rename imx8mm-venice.c to venice.c as it is no longer imx8mm specific - update README with differences for IMX8MN vs IMX8MM Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-19arm: imx8m: add support for Advantech RSB-3720Ying-Chun Liu (PaulLiu)
Add initial support for Advantech RSB-3720 board. The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Darren Huang <darren.huang@advantech.com.tw> Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw> Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw> Signed-off-by: Tim Liang <tim.liang@advantech.com.tw> Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: uboot-imx <uboot-imx@nxp.com> Cc: Peng Fan (OSS) <peng.fan@oss.nxp.com>
2022-02-17Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- a37xx: pci: Cleanup and minor fix for root port check (Pali) - pci: mvebu: Ensure that root port is always on root zero bus (Pali) - kwbimage: Fix dumping DATA registers for v0 images (Pali) - kwbimage: Support for parsing extended v0 format (Pali) - a37xx: Fix code and update DTS files to upstream version (Pali) - a37xx: Fix and extend building memory map (Pali) - ddr: marvell: a38x: fix BYTE_HOMOGENEOUS_SPLIT_OUT decision (Marek) - mvebu: Optionally reset board on DDR training failure (Marek)
2022-02-17arm: a37xx: Update DTS files to version from upstream Linux kernelPali Rohár
This change updates all Armada 37xx DTS files to version which is used by Linux kernel v5.18. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-17arm: a37xx: pci: Use standard register macros from pci.hPali Rohár
PCI config space of the aardvark PCIe Root Port is available only in internal aardvark memory space starting at offset 0x0. PCI Express registers (PCI_EXP_*) start at offset 0xc0. And Advanced Error Reporting registers (PCI_ERR_*) start at offset 0x100. Replace custom aardvark register macros by standard PCI macros from include/pci.h file with fixed offset. Some DEVCTL and AER macros are not defined in include/pci.h file, so define them in the same way as in linux uapi header file pci_regs.h. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-16include: configs: Update env for selecting right dtbSinthu Raja
Now that single defconfig can be used for booting J721E EVM and SK, default device tree will not work for selecting dtb for kernel. Update the findfdt env to select right dtb based on board_name env variable. Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
2022-02-16fdtdec.h: Remove gurads around fdtdec_resetup functionTom Rini
This function has not been conditionally compiled for some time, so remove the incorrect guards around the declaration. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-15microblaze: exception: migrate MICROBLAZE_V5 to KconfigOvidiu Panait
Also, rename it to XILINX_MICROBLAZE0_DELAY_SLOT_EXCEP, since it only covers delay slot exception support. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/20220213080925.1548411-2-ovidiu.panait@windriver.com Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-02-15arm64: zynqmp: Add command for disabling loading other overlaysMichal Simek
Add command "zynqmp pmufw node close" to disable permission to load additional pmufw config overlays. This command will make sure that any other sw will ask for changing permission. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/cfa5cc7909eb8deb23eb0f11c26954cbaddeb861.1642163135.git.michal.simek@xilinx.com
2022-02-15xilinx: firmware: Introduce zynqmp_pmufw_node() for loading PMU fragmentsMichal Simek
Introduce zynqmp_pmufw_node() for loading PMU configuration fragment for enabling IPs. Firmware driver has small overlay where NODE id is added and config fragment is sent to PMUFW. There is a need to build PMUFW with fragment support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/636e8150bd4e2b1f988d59795772c685ceeec083.1642163135.git.michal.simek@xilinx.com
2022-02-15power: zynqmp: Add power domain driver for ZynqMPMichal Simek
Driver should be enabled by CONFIG_POWER_DOMAIN=y and CONFIG_ZYNQMP_POWER_DOMAIN=y. Power domain driver doesn't have own DT node but it uses zynqmp firmware DT node that's why there is a need to bind driver when firmware node is found. Driver itself is simple. It is sending pmufw config object overlay for enabling access to device which is done in ...domain_request(). In ...domain_on() capabilities are passed and node is requested. This should be bare minimum of required to get power domain driver working. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/f4b9433b91c0b18c375b061c7a4e29d428f70547.1644226055.git.michal.simek@xilinx.com
2022-02-11acpi: Move acpi_write_tables() to a generic headerSimon Glass
This function is used by both x86 and sandbox. Put it in a common header file. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-02-11DFU: Check the number of arguments and argument string strictlyMasami Hiramatsu
When parsing the dfu_alt_info, check the number of arguments and argument string strictly. If there is any garbage data (which is not able to be parsed correctly) in dfu_alt_info, that means something wrong and user may make a typo or mis- understanding about the syntax. Since the dfu_alt_info is used for updating the firmware, this mistake may lead to brick the hardware. Thus it should be checked strictly for making sure there is no mistake. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
2022-02-11cmd: pxe_utils: sysboot: add kaslr-seed generation supportZhang Ning
this will add kaslrseed keyword to sysboot lable, when it set, it will request to genarate random number from hwrng as kaslr-seed. with this patch exlinux.conf label looks like label l0 menu testing linux /boot/vmlinuz-5.15.16-arm initrd /boot/initramfs-5.15.16-arm.img fdtdir /boot/dtbs/5.15.16-arm/ kaslrseed append root=UUID=92ae1e50-eeeb-4c5b-8939-7e1cd6cfb059 ro Tested on Khadas VIM with kernel 5.16.0-rc5-arm64, Debian 11. Signed-off-by: Zhang Ning <zhangn1985@qq.com>
2022-02-11Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
2022-02-11usb: ehci-mx6: Enable OTG detection on imx8mm and imx8mnAdam Ford
The imx8mm and imx8mn appear compatible with imx7d-usb flags in the OTG driver. If the dr_mode is defined as host or peripheral, the device appears to operate correctly, however the auto host/peripheral detection results in an error. The solution isn't just adding checks for imx8mm and imx8mn to the check for imx7, because the USB clock needs to be running to read from the USBNC_PHY_STATUS_OFFSET register or it will hang. Marek requested that I not enable the clocks in ehci_usb_of_to_plat, so I modified that function to return an unknown state if the device tree does not explicitly state whether it is a host or a peripheral. When the driver probes, it looks to see if it's in the unknown state, and only then will it read the register to auto-detect. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Tim Harvey <tharvey@gateworks.com>
2022-02-10common: drop CONFIG_SYS_RESET_ADDROvidiu Panait
There are no boards that define CONFIG_SYS_RESET_ADDR, so drop the remaining comments referencing it and also the config_whitelist.txt entry. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: thomas@wytron.com.tw
2022-02-10input: apple: Add support for Apple SPI keyboardMark Kettenis
This driver adds support for the keyboard on Apple Silicon laptops. The controller for this keyboard sits on an SPI bus and uses an Apple-specific HID over SPI protocol. The packets sent by this controller for key presses and key releases are fairly simple and are decoded directly by the code in this driver and converted into standard Linux keycodes. The same controller handles the touchpad found on these laptops. Packets for touchpad events are simply ignored. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-02-10configs: apple: Add NVMe boot targetMark Kettenis
Add a boot target for NVMe such that we can boot from NVMe. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2022-02-10mailbox: apple: Add driver for Apple IOP mailboxMark Kettenis
This mailbox driver provides a communication channel with the Apple IOP controllers found on Apple SoCs. These IOP controllers are used to implement various functions such as the System Manegement Controller (SMC) and NVMe storage. It allows sending and receiving a 96-bit message over a single channel. The header file with the struct used for mailbox messages is taken straight from Linux. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Simon Glass <sjg@chromium.org> Tested on: Macbook Air M1 Tested-by: Simon Glass <sjg@chromium.org>
2022-02-10Merge tag 'dm-pull-8feb22-take3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm patman snake-case conversion binman fit improvements ACPI fixes and making MCFG available to ARM [trini: Update scripts/pylint.base] Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-10arm: kirkwood: Pogoplug E02 : Convert Ethernet to Driver ModelTony Dinh
The Pogoplug E02 board has the network chip Marvell 88E1116R. Convert to Driver Model and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL to bring up Ethernet. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - As the result of the migration to Driver Model, this u-boot image has grown substantially (about 100K, give or take). The old envs location at 0x60000 (384k) is no longer possible. Move it to 0xC0000 (768K). - Miscellaneous changes: Move constants to .c file and remove header file board/cloudengines/pogo_e02/pogo_e02.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, use BIT macro, and cleanup comments. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10arm: kirkwood: Dockstar : Add DM EthernetTony Dinh
The Dockstar board has the network chip Marvell 88E1116R. Convert to Ethernet driver model, and use uclass mvgbe and the compatible driver M88E1118R to bring up Ethernet. - Add CONFIG_DM_ETH and associated configs. - Add board_eth_init() to use uclass mvgbe to bring up the network. And remove ad-hoc code. - Add CONFIG_PHY_MARVELL to properly configure the network. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Miscellaneous changes: Move constants to .c file and remove header file board/Seagate/dockstar/dockstar.h, use CONFIG_SYS_THUMB_BUILD to keep u-boot image under 512K, add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. - Note: This patch is a RESEND for a previous patch: https://patchwork.ozlabs.org/project/uboot/patch/20210812051854.1340-2-mibodhi@gmail.com/ Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10arm: kirkwood: iConnect : Add Ethernet supportTony Dinh
- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init(), CONFIG_DM_ETH, and CONFIG_PHY_MARVELL to bring up Ethernet. - Miscellaneous changes: Move constants to .c file and remove header file board/iomega/iconnect/iconnect.h. Add CONFIG_HUSH_PARSER, use BIT macro, and cleanup comments. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-02-10arm: kirkwood: Dreamplug : Use Marvell uclass mvgbe and PHY driver for EthernetTony Dinh
The Globalscale Technologies Dreamplug board has the network chip Marvell 88E1116R. Use uclass mvgbe and the compatible driver M88E1310 driver to bring up Ethernet. - Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board. - Add board_eth_init() to use uclass mvgbe to bring up both network port 0 and 1. And remove ad-hoc code. - Enable CONFIG_PHY_MARVELL to properly configure the network. - Add myself as maintainer (this board seems to be orphaned, could not contact Jason Cooper using current email). - Miscellaneous changes: Move constants to .c file and remove header file board/Marvell/dreamplug/dreamplug.h, cleanup comments. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Pali Rohár <pali@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 22:58:08 +0000