aboutsummaryrefslogtreecommitdiff
path: root/lib_ppc
AgeCommit message (Collapse)Author
2007-08-14Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-08-10mpc83xx: Add support for the display of reset statusDave Liu
83xx processor family has many reset sources, such as power on reset, software hard reset, software soft reset, JTAG, bus monitor, software watchdog, check stop reset, external hard reset, external software reset. sometimes, to figure out the fault of system, we need to know the cause of reset early before the prompt of u-boot present. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-08-06Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk
2007-08-03Merge branch 'testing' into workingAndy Fleming
Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
2007-08-02[ppc440SPe] Graceful recovery from machine check during PCIe configurationGrzegorz Bernacki
During config transactions on the PCIe bus an attempt to scan for a non-existent device can lead to a machine check exception with certain peripheral devices. In order to avoid crashing in such scenarios the instrumented versions of the config cycle read routines are introduced, so the exceptions fixups framework can gracefully recover. Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Acked-by: Rafal Jaworowski <raj@semihalf.com>
2007-07-13make show_boot_progress () weak.Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-07-11Fix malloc problem introduced with the relocation fixup for the PPC platformStefan Roese
The relocation fixup didn't handle the malloc pointer initialization correctly. This patch fixes this problem. Tested successfully on 4xx. The relocation fixup patches for 4xx will follow soon. Signed-off-by: Stefan Roese <sr@denx.de>
2007-07-10disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDSJon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09Merge with /home/hs/Atronic/u-bootWolfgang Denk
2007-07-04Don't set gd->reloc_off if relocation of .fixup works correctlyGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-07-04lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger
This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-03Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk
2007-06-22[PCS440EP] upgrade the PCS440EP board:Heiko Schocher
- Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
2007-06-08Fix config problems on SC3 board; make ide_reset_timeout work.Wolfgang Denk
2007-05-18Merge with git://www.denx.de/git/u-boot.gitStefan Roese
2007-05-17Merge with /home/git/u-bootWolfgang Denk
2007-05-15Search the exception table with linear algorithmZang Roy-r61911
Search the exception table with linear algorithm instead of bisecting algorithm. Because the exception table might be unsorted. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2007-05-11ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx tooStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de>
2007-05-01mpc83xx: replace elaborate boottime verbosity with 'clocks' commandKim Phillips
and fix CPU: to align with Board: display text. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2007-04-20Cleanup compiler warnings, update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2007-01-22Merge branch 'master' into hpc2roy zang
Conflicts: drivers/cfi_flash.c The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support mpc7448hpc2 board.
2007-01-11 Added support for the SOLIDCARD III board from EurodesignHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2007-01-04Merge branch 'master' into hpc2roy zang
2006-12-24Merge with /home/hs/TQ/u-boot-devWolfgang Denk
2006-12-21Added support for the TQM8272 board from TQHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2006-12-04Slight code clean up.roy zang
Add comments, delete duplicate define and remove spaces. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-12-01Fix the exception occuring in RAM table search issue.roy zang
The original search_one_table() function code can only processes the search for the exception occurring in FLASH/ROM, because the exception and fixup table usually locate in FLASH. If the exception address is also in FLASH, it will be OK. If the exception occurs in RAM, after the u-boot relocation, a relocation offset should be added. clean up the code in cpu/74xx_7xx/cpu.c Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-12-01Fix the confilcts when merging 'master' into hpc2.roy zang
The conflicts due to a new mpc7448 p3m7448 board is in the main tree. Merge branch 'master' into hpc2 Conflicts: MAKEALL cpu/74xx_7xx/cpu.c cpu/74xx_7xx/cpu_init.c cpu/74xx_7xx/speed.c
2006-11-30Code cleanup.Wolfgang Denk
2006-11-03mpc83xx: Replace CFG_IMMRBAR with CFG_IMMRTimur Tabi
Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx tree matches the other 8xxx trees. Signed-off-by: Timur Tabi <timur@freescale.com>
2006-11-02General code modification for mpc7448hpc2 board support.roy zang
1. Add 7447A and 7448 processor support. 2. Add the following flags. CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically (such as by switch on board), this flag should be set. CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot relocates to RAM, this flag should be set. CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the system hang in exception, this flag should be set. There is a design issue for tsi108/109 pci configure read. When pci scan the slots, if there is no pci card, the tsi108/9 will cause a machine check exception for mpc7448 processor. Signed-off-by: Alexandre Bounine <alexandreb@tundra.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
2006-10-19Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger
2006-10-18Merge with /home/tur/proj/051_uboot_linux_v38b/u-bootWolfgang Denk
2006-10-13Preliminary patch adding support for the MarelV38B board.Bartlomiej Sieka
2006-10-10Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger
2006-10-09Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk
Based on patch by Mike Frysinger, 20 Jun 2006
2006-09-19Merge branch 'master' of http://www.denx.de/git/u-bootJon Loeliger
Conflicts: board/stxxtc/Makefile
2006-09-07Add support for AMCC Sequoia PPC440EPx eval boardStefan Roese
- Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006
2006-09-01Add support for a saving build objects in a separate directory.Marian Balakowicz
Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
2006-08-17Unlock cache before kernel starts up for MPC86xxHaiying Wang
2006-08-09Merge branch 'wd'Jon Loeliger
2006-07-13Add support for reading and writing mac addresses to or from ID EEPROM.Haiying Wang
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). With attached patch, we can use command "mac/mac read/mac save/" to read and write EEPROM under u-boot prompt. U-boot will calculate the checksum of EEPROM while bootup, if it is right, then u-boot will check whether the mac address of eTSEC0/1/2/3 is availalbe (non-zero). If there is mac address availabe in EEPROM, u-boot will use it, otherewise, u-boot will use the mac address defined in MPC8641HPCN.h. This matches the requirement to set unique mac address for each TSEC port. Signed-off-by: Haiying Wang <haiying.wang@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-12Add support for TQM885D board.Markus Klotzbuecher
Patch by Martin Krause, 20 Mar 2006 Signed-off-by: Martin Krause <martin.krause@tqs.de>
2006-06-30Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).Marian Balakowicz
2006-06-30Call serial_initialize() before first debug() is used.Marian Balakowicz
2006-05-10Remove unneeded INIT_RAM_LOCK cache twiddling.Haiying Wang
Correctly tracks r29 as global data pointer now. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-04-26Initial support for MPC8641 HPCN board.Jon Loeliger
2006-03-31GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk
2006-02-10Enable address translation on MPC83xxKumar Gala
Patch by Kumar Gala, 10 Feb 2006
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 09:12:13 +0000