aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2022-05-04net: mdio-uclass: add dm_phy_find_by_ofnode() helperMarek Behún
Add helper to resolve PHY node from it's ofnode via DM MDIO subsystem. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-25bootstd: ethernet: Add a bootdev driverSimon Glass
Add a bootdev driver for Ethernet. It can use the PXE boot mechanism to locate a file, added later. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-04-22Allow colon in PXE bootfile URLsLyle Franklin
- U-boot's PXE flow supports prefixing your bootfile name with an IP address to fetch from a server other than the DHCP server, e.g. `hostIPaddr:bootfilename`: https://github.com/u-boot/u-boot/commit/a93907c43f847f076dd0e34ee3b69b5e8e6d0d29 - However, this breaks bootfile paths which contain a colon, e.g. `f0:ad:4e:10:1b:87/7/pxelinux.cfg/default` - This patch checks whether the `hostIPaddr` prefix is a valid IP address before overriding the serverIP otherwise the whole bootfile path is preserved Signed-off-by: Lyle Franklin <lylejfranklin@gmail.com>
2022-04-12net: tftp: fix tftp server initializationArjan Minzinga Zijlstra
Some globals where not properly initialized causing timeouts as data packets where not immediately acknowledged. Fixes: cc6b87ecaa96 ("net: tftp: Add client support for RFC 7440") Signed-off-by: Arjan Minzinga Zijlstra <arjan.minzingazijlstra@fox-it.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-04-10treewide: Rename PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NAMarek Behún
Rename constant PHY_INTERFACE_MODE_NONE to PHY_INTERFACE_MODE_NA to make it compatible with Linux' naming. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10net: introduce helpers to get PHY interface mode from a device/ofnodeMarek Behún
Add helpers ofnode_read_phy_mode() and dev_read_phy_mode() to parse the "phy-mode" / "phy-connection-type" property. Add corresponding UT test. Use them treewide. This allows us to inline the phy_get_interface_by_name() into ofnode_read_phy_mode(), since the former is not used anymore. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
2022-04-10treewide: use dm_mdio_read/write/reset() wrappersMarek Behún
Use the new dm_mdio_read/write/reset() wrappers treewide, instead of always getting and dereferencing MDIO operations structure pointer. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10net: mdio-uclass: add wrappers for read/write/reset operationsMarek Behún
Add wrappers dm_mdio_read(), dm_mdio_write() and dm_mdio_reset() for DM MDIO's .read(), .write() and .reset() operations. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10net: introduce helpers to get PHY ofnode from MACMarek Behún
Add helpers ofnode_get_phy_node() and dev_get_phy_node() and use it in net/mdio-uclass.c function dm_eth_connect_phy_handle(). Also add corresponding UT test. This is useful because other part's of U-Boot may want to get PHY ofnode without connecting a PHY. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-10net: mdio-uclass: use ARRAY_SIZE()Marek Behún
Use the ARRAY_SIZE() macro instead of hardcoding sizes of arrays in macros. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-04-10net: mdio-uclass: fix type for phy_mode_str and phy_handle_strMarek Behún
These global variables should both have type static const char * const Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
2022-03-25Convert CONFIG_SYS_RX_ETH_BUFFER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_RX_ETH_BUFFER Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_TFTP_PORT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TFTP_PORT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FAULT_ECHO_LINK_DOWN Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NFS_TIMEOUT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NFS_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NET_RETRY_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NET_RETRY_COUNT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ARP_TIMEOUT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARP_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-03net: Remove CONFIG_BOOTP_DHCP_REQUEST_DELAYTom Rini
This option is not in use anywhere and the documentation implies it's for some very old and unlikely to be seen currently issues. Rather than update the code so the CONFIG symbol could be easily in Kconfig, remove the code. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-21net: Drop #ifdefs with CONFIG_BOOTP_SERVERIPSimon Glass
Use IS_ENABLED() instead, to reduce the number of build paths. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-21Convert CONFIG_BOOTP_SERVERIP to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_BOOTP_SERVERIP Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21Convert CONFIG_TIMESTAMP to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_TIMESTAMP Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21Convert CONFIG_UDP_CHECKSUM to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_UDP_CHECKSUM Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-21Convert CONFIG_KEEP_SERVERADDR to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_KEEP_SERVERADDR Drop the preprocessor usage also. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-01-20Merge tag 'doc-2022-04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request doc-2022-04-rc1 Replace @return by Return: in code comments.
2022-01-19doc: replace @return by Return:Heinrich Schuchardt
Sphinx expects Return: and not @return to indicate a return value. find . -name '*.c' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; find . -name '*.h' -exec \ sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \; Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-01-19Merge tag 'xilinx-for-v2022.04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2022.04-rc1 gpio: - Add modepin driver net: - Save random mac addresses to eth variable zynqmp gem: - Add support for mdio bus DT description - Add support for reset and SGMII phy configuration - Reduce timeout for MDIO accesses zynqmp clk: - Fix clock handling for gem and usb phy: - Add zynqmp phy/serdes driver serial: - Add one missing compatible string microblaze: - Symbol alignement - SPL fixups - Code cleanups zynqmp: - Various dt changes, DP pre-reloc, gem resets, gem clocks - Switch SOM to shared psu configuration - Move dcache handling to firmware driver - Workaround gmii2rgmii DT description issue - Enable broadcasts again - Change firmware enablement logic - Small adjustement in firmware driver versal: - Support new mmc@ DT nodes - Fix run time variable handling - Add missing I2C_PMC ID for power domain
2022-01-15net: fastboot: make UDP port net: configurableChristian Gmeiner
The fastboot protocol uses per default the UDP port 5554. In some cases it might be needed to change the used port. The fastboot utility provides a way to specifiy an other port number to use already. fastboot -s udp:192.168.1.76:1234 boot fastboot.img Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-15net: dsa: fix phydev->speed being uninitialized for the CPU port fixed PHYVladimir Oltean
If the DSA API is going to allow drivers to do things such as: - phy_config in dsa_ops :: port_probe - phy_startup in dsa_ops :: port_enable then it would actually be good if the ->port_probe() method would actually be called in all cases before the ->port_enable() is. Currently this is true for user ports, but not true for the CPU port, because the CPU port does not have a udevice registered for it (this is all part of DSA's design). So the current issue is that after phy_startup has finished for the CPU port, its phydev->speed is an uninitialized value, because phy_config() was never called for the priv->cpu_port_fixed_phy, and it is precisely phy_config() who copies the speed into the phydev in the case of the fixed PHY driver. So we need to simulate a probing event for the CPU port by manually calling the driver's ->port_probe() method for the CPU port. Fixes: 8a2982574854 ("net: dsa: introduce a .port_probe() method in struct dsa_ops") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-01-11net: uclass: Save generated ethernet MAC addresses to the environmentMichal Simek
When a MAC address is randomly generated we currently only update the appropriate data structure. For consistency and to re-align with historic usage, it should be also saved to the appropriate environment variable as well. Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> [trini: Update Kconfig, handle legacy networking case as well] Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Ramon Fried <rfried.dev@gmail.com> Link: https://lore.kernel.org/r/1a2518e3cc19c14a41875ef64c5acc1f16edc813.1641893287.git.michal.simek@xilinx.com
2021-11-23net: dsa: Use true instead of 1 in the set_promisc() callBin Meng
set_promisc() call accepts the parameter of a bool type. Make it clear by using true instead of 1. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-11-23net: bootp: Correct VCI string transmissionWalter Stoll
The VCI string sent during bootp of U-Boot-SPL is corrupt. This is because the byte counter is not adjusted within the bootp_extended() function when the VCI string is added. We fix this. Signed-off-by: Walter Stoll <walter.stoll@duagon.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-23net: dsa: allow drivers to get the port OF nodeVladimir Oltean
In the current DSA switch driver API, only the udevice of the switch (belonging to UCLASS_DSA) is exposed, as well as an "int port" argument. So drivers do not have access to the udevice of individual ports (belonging to UCLASS_ETH), one of the reasons being that not all ports have an associated UCLASS_ETH udevice. However, all DSA ports have an OF node, and in some cases the driver needs a handle to it, for all ports including the CPU port. Example: the following Linux per-port device tree property: managed = "in-band-status"; states whether a port should operate with clause 37 in-band autoneg enabled or not. This patch exposes a function which can be called by individual drivers as needed. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-30WS cleanup: remove trailing empty linesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2021-09-29Merge branch 'network_master' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-net into next - Fix some non-NULL terminated strings in the networking subsystem - net: tsec: Mark tsec_get_interface as __maybe_unused
2021-09-28net: dsa: ensure port names are NULL-terminated after DSA_PORT_NAME_LENGTH ↵Vladimir Oltean
truncation strncpy() simply bails out when copying a source string whose size exceeds the destination string size, potentially leaving the destination string unterminated. One possible way to address is to pass DSA_PORT_NAME_LENGTH - 1 and a previously zero-initialized destination string, but this is more difficult to maintain. The chosen alternative is to use strlcpy(), which properly limits the copy len in the (srclen >= size) case to "size - 1", and which is also more efficient than the strncpy() byte-by-byte implementation by using memcpy. The destination string returned by strlcpy() is always NULL terminated. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28net: mdio-uclass: rewrite dm_mdio_post_probe using strlcpyVladimir Oltean
dm_mdio_post_probe used to be vulnerable after truncation, but has been patched by commit 398e7512d8d7 ("net: Fix Covarity Defect 244093"). Nonetheless, we can use strlcpy like the rest of the code base now, which yields the same result. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28net: dsa: remove unused variablesVladimir Oltean
"dev" and "dsa_pdata" are unused inside dsa_port_of_to_pdata. "dsa_priv" is unused inside dsa_port_probe. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28net: dsa: pass CPU port fixed PHY to .port_disableVladimir Oltean
While adding the logic for DSA to register a fixed-link PHY for the CPU port, I forgot to pass it to the .port_disable method too, just .port_enable. Bug had no impact for felix_switch.c, due to the phy argument not being used, but ksz9477.c does use it => NULL pointer dereference. Fixes: fc054d563bfb ("net: Introduce DSA class for Ethernet switches") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-09-28net: dsa: introduce a .port_probe() method in struct dsa_opsVladimir Oltean
Some drivers might want to execute code for each port at probe time, as opposed to executing code just-in-time for the port selected for networking. To cater to that use case, introduce a .port_probe() callback method into the DSA switch operations which is called for each available port, at the end of dsa_port_probe(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Michael Walle <michael@walle.cc>
2021-09-28net: dsa: refactor the code to set the port MAC address into a dedicated ↵Vladimir Oltean
function This snippet of code has a bothering "if (...) return 0" in it which assumes it is the last piece of code running in dsa_port_probe(). This makes it difficult to add further code at the end of dsa_port_probe() which does not depend on MAC address stuff. So move the code to a dedicated function which returns void and let the code flow through. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Michael Walle <michael@walle.cc>
2021-09-28net: dsa: use "err" instead of "ret" in dsa_port_probeVladimir Oltean
DM DSA uses "err" for error code values, so use this consistently. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Tested-by: Michael Walle <michael@walle.cc>
2021-09-17Remove #include <timestamp.h> from files which do not need itPali Rohár
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-04net: Move network rules to drivers/netSimon Glass
The code under drivers/net is related to ethernet networking drivers, in some fashion or another. Drop these from the top-level Makefile and also move the phy rule into drivers/net/Makefile which is where it belongs. Make the new rule for drivers/net check for the build-stage relevant ETH symbol. Fix up some Kconfig dependencies while we're here to mirror how the Makefile logic now works. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Introduce ETH, Kconfig dependency changes, am43xx fix] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-02global: Convert simple_strtoul() with decimal to dectoul()Simon Glass
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-07-22net: define LOG_CATEGORYPatrick Delaunay
Define LOG_CATEGORY to allow filtering with log command. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-07-10net: dsa: enable master promisc mode if available and neededTim Harvey
If ports have their own unique MAC addrs and master has a set_promisc function, call it so that packets will be received for ports. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2021-06-28Merge tag 'v2021.07-rc5' into nextTom Rini
Prepare v2021.07-rc5 # gpg: Signature made Mon 28 Jun 2021 03:39:36 PM EDT # gpg: using RSA key 1A3C7F70E08FAB1707809BBF147C39FF9634B72C # gpg: Good signature from "Thomas Rini <trini@konsulko.com>" [ultimate] # Conflicts: # configs/am64x_evm_r5_defconfig
2021-06-18net: use the same alias stem for ethernet as linuxMichael Walle
Linux uses the prefix "ethernet" whereas u-boot uses "eth". This is from the linux tree: $ grep "eth[0-9].*=.*&" arch/**/*dts{,i}|wc -l 0 $ grep "ethernet[0-9].*=.*&" arch/**/*dts{,i}|wc -l 633 In u-boot device trees both prefixes are used. Until recently the only user of the ethernet alias was the sandbox test device tree. This changed with commit fc054d563bfb ("net: Introduce DSA class for Ethernet switches"). There, the MAC addresses are inherited based on the devices sequence IDs which is in turn given by the device tree. Before there are more users in u-boot and both worlds will differ even more, rename the alias prefix to "ethernet" to match the linux ones. Also adapt the test cases and rename any old aliases in the u-boot device trees. Cc: David Wu <david.wu@rock-chips.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-06-18net: use a more deterministic approach to get the active ethernet deviceMichael Walle
If the environment variable "ethact" is not set, the first device in the uclass is returned. This depends on the probing order of the ethernet devices. Moreover it is not not configurable at all. Try to return the ethernet device with sequence id 0 first which then can be configured by the aliases in a device tree. Fall back to the old mechanism in case of an error. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 23:41:42 +0000