aboutsummaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2021-03-22tools: fdtgrep: Use unsigned chars for arraysSamuel Dionne-Riel
Otherwise, values over 127 end up prefixed with ffffff. Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-22patman: Quieten down the alias checkingSimon Glass
When a tag is used in a patch subject (e.g. "tag: rest of message") and it cannot be found as an alias, patman currently reports a fatal error, unless -t is provided, in which case it reports a warning. Experience suggest that the fatal error is not very useful. Instead, default to reporting a warning, with -t tell patman to ignore it altogether. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-22patman: Update documentation to match new usageSimon Glass
With the subcommands some of the documentation examples are no-longer correct. Fix all of them, so it is consistent. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-20tools: mtk_image: add an option to set device header offsetWeijie Gao
This patch adds an option which allows setting the device header offset. This is useful if this tool is used to generate ATF BL2 image of mt7622 for SD cards. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2021-03-15Merge tag 'v2021.04-rc4' into nextTom Rini
Prepare v2021.04-rc4
2021-03-12arm: mvebu: a38x: Remove dead code ARMADA_39XPali Rohár
Config option ARMADA_39X is never set so remove all dead code hidden under ifdef CONFIG_ARMADA_39X blocks. Also remove useless checks for CONFIG_ARMADA_38X define as this macro is always defined for a38x code path. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-03-04buildman: Support single-threaded operationSimon Glass
At present even if only a single thread is in use, buildman still uses threading. For some debugging it is helpful to do everything in the main process. Allow -T0 to support this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-03fix patman --limit-cc optionBernhard Kirchen
patman's --limit-cc option parses its argument to an integer and uses that to trim the list of CC recipients to a particular maximum. but that only works if the cc variable is a list, which it is not. Signed-off-by: Bernhard Kirchen <bernhard.kirchen@mbconnectline.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-03Merge tag 'u-boot-imx-20210303' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2021.04 ---------------- - new boards: - i.MX8MN Beacon EmbeddedWorks (2GB) - Gateworks Venice imx8mm - convert to DM: - imx53-qsb, mx53loco, mx51evk, mx23-evk - Fixes : - Network : FEC ethernet quirks - DH dh-imx6 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6597
2021-03-02binman: Indicate how to make binman verboseSimon Glass
Add notes about how to make binman produce verbose logging when building. Add a comment on how to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-01tools: imx8mimage: Restore the original __ALIGN_MASK() macroFabio Estevam
Since commit c738adb8dbbf ("tool: Move ALIGN_MASK to header as common MACRO") the i.MX8MQ EVK board no longer boots. The reason is that imx8mimage.c used a custom __ALIGN_MASK() macro, so restore the original macro to fix the boot and rename it accordingly. Reported-by: Lukas Rusak <lorusak@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Ye Li <ye.li@nxp.com>
2021-02-26tools/mkeficapsule.c: fix DEBUG buildKlaus Heinrich Kiwi
Fix a missing comma sign (,) from a printf(), that is only reachable if DEBUG is defined, in which case the build fails with: tools/mkeficapsule.c:266:36: error: expected ‘)’ before ‘bin’ 266 | printf("\tbin: %s\n\ttype: %pUl\n" bin, guid); | ^~~~ | ) Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-15image: Adjust the workings of fit_check_format()Simon Glass
At present this function does not accept a size for the FIT. This means that it must be read from the FIT itself, introducing potential security risk. Update the function to include a size parameter, which can be invalid, in which case fit_check_format() calculates it. For now no callers pass the size, but this can be updated later. Also adjust the return value to an error code so that all the different types of problems can be distinguished by the user. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Bruce Monroe <bruce.monroe@intel.com> Reported-by: Arie Haenel <arie.haenel@intel.com> Reported-by: Julien Lenoir <julien.lenoir@intel.com>
2021-02-14buildman: 'Thread' object has no attribute 'isAlive'Heinrich Schuchardt
The isAlive() method was deprecated in Python 3.8 and has been removed in Python 3.9. See https://bugs.python.org/issue37804. Use is_alive() instead. Since Python 2.6 is_alive() has been a synonym for isAlive(). So there should be no problems for users using elder Python 3 versions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-01tools/fit_check_sign.c: Update usage function.Ilies CHERGUI
Add "-c" option to set the configuration name when checking the FIT image signature. Signed-off-by: Ilies CHERGUI <ilies.chergui@gmail.com>
2021-01-31Merge tag 'dm-pull-30jan21' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm tpm fixes for coral binman fixes support for symbols in sub-sections support for additional cros_ec commands various minor fixes / tweaks
2021-01-30binman: Allow for skip_at_start when reading entriesSimon Glass
The offset of an entry needs to be adjusted by its skip-at-start value. This is currently missing when reading entry data. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30binman: Support alignment of filesSimon Glass
When packing files it is sometimes useful to align the start of each file, e.g. if the flash driver can only access 32-bit-aligned data. Provides a new property to support this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30binman: Allow vblock to include devicetree blobsSimon Glass
At present if a devicetree blob is included in a vblock it does not deal with updates. This is because the vblock is created once at the start and does not have a method to update itself later, after all the entry contents are finalised. Fix this by adjusting how the vblock is created. Also simplify Image.ProcessEntryContents() since it effectively duplicates the code in Section.ProcessContents(). Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30binman: Support reading an image with entry argsSimon Glass
Normally when an entry is created, any entry arguments it has are required to be provided, so it can actually generate its contents correctly. However when an existing image is read, Entry objects are created for each of the entries in the image. This happens as part of the process of reading the image into binman. In this case we don't need the entry arguments, since we do not intend to regenerate the entries, or at least not unless requested. So there is no sense in reporting an error for missing entry arguments. Add a new property for the Image to handle this case. Update the error reporting to be conditional on this property. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30binman: Support finding symbols in sub-sectionsSimon Glass
At present binman only supports resolving symbols in the same section as the binary that uses it. This is quite limited because we often need to group entries into different sections. Enhance the algorithm to search the entire image for symbols. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30binman: Fix a few file commentsSimon Glass
Two files have the wrong comment at the top of them. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30binman: Show the size when writing entriesSimon Glass
Update the log output to show the size, since this is useful information. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30binman: Update the TODO listSimon Glass
Two of the items have been completed and I thought of another one. Update the list. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30patman: Correct lz4 compression parametersSimon Glass
At present on large files, lz4 uses a larger block size (e.g. 256KB) than the 64KB supported by the U-Boot decompression implementation. Also it is optimised for maximum compression speed, producing larger output than we would like. Update the parameters to correct these problems. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-30dtoc: binman: Drop Python 2 codeSimon Glass
Drop a few more Python 2 relics that are no-longer needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-29tools: add mkeficapsule to .gitignoreHeinrich Schuchardt
mkeficapsule is a build product. Add it to .gitignore Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-23Merge tag 'efi-2021-04-rc1-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-04-rc1-3 Bug fixes for UEFI sub-system: * correct value of EFI_BLOCK_IO_PROTOCOL.Media.LastBlock * correct GUID when closing of EFI_LOAD_FILE_PROTOCOL * error handling in mkeficapsule tool Bug fixes for FAT file system: * consistent error handling for flush dir()
2021-01-23mkeficapsule: Miscellaneous fixes in the utilitySughosh Ganu
Miscellaneous fixes in the mkeficapsule utility -- these include a few resource leak issues flagged by Coverity along with some additional code improvements suggested by Heinrich during code review. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2021-01-23tools: mkeficapsule: fill reserved members of structureAKASHI Takahiro
Fill reserved members of efi_firmware_management_capsule_image_header structure with zero's for safety. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Fixes: CID 316354 Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-22tools: env: return error if ubi_update_start() failsMartin Hundebøll
The UBI_IOCVOLUP ioctl can fail if exclusive access to the volume isn't obtained. If this happens, the flush operation doesn't return error, leaving the caller without knowledge of missing flush. Fix this by forwarding the error (-1) from ubi_update_start(). Fixes: 34255b92e6e ("tools: env: Add support for direct read/write UBI volumes") Signed-off-by: Martin Hundebøll <martin@geanix.com>
2021-01-22mkimage: Move padding commands outside of FIT_SIGNATUREJoel Stanley
These commands were disabled when CONFIG_FIT_SIGNATURE is disabled, but they do not depend on crypto support so they can be unconditionally enabled. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-01-22tools/Makefile: FIT_CIPHER requires libsslJoel Stanley
If CONFIG_FIT_CIPHER is enabled without CONFIG_FIT_SIGNATURE then mkimage/dumpimage will fail to link: /usr/bin/ld: tools/common/image-cipher.o: in function `fit_image_decrypt_data': image-cipher.c:(.text+0x9a): undefined reference to `image_get_host_blob' /usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x10): undefined reference to `EVP_aes_128_cbc' /usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x40): undefined reference to `EVP_aes_192_cbc' /usr/bin/ld: tools/common/image-cipher.o:(.data.rel+0x70): undefined reference to `EVP_aes_256_cbc' /usr/bin/ld: tools/lib/aes/aes-encrypt.o: in function `image_aes_encrypt': aes-encrypt.c:(.text+0x22): undefined reference to `EVP_CIPHER_CTX_new' /usr/bin/ld: aes-encrypt.c:(.text+0x6f): undefined reference to `EVP_EncryptInit_ex' /usr/bin/ld: aes-encrypt.c:(.text+0x8d): undefined reference to `EVP_EncryptUpdate' /usr/bin/ld: aes-encrypt.c:(.text+0xac): undefined reference to `EVP_CIPHER_CTX_free' /usr/bin/ld: aes-encrypt.c:(.text+0xf2): undefined reference to `EVP_EncryptFinal_ex' collect2: error: ld returned 1 exit status Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-01-22tools: image-host: add support for several sub-imagesPhilippe Reynes
The propoerty sign-images points to images in the configuration node. But thoses images may references severals "sub-images" (for example for images loadable). This commit adds the support of severals sub-images. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2021-01-22tools: image-host: clean function fit_config_get_hash_listPhilippe Reynes
This commit creates a function fit_config_add_hash that will be used in the next commit to support several 'sub-images'. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-18tools: mtk_image: add support for booting ARM64 imagesFabien Parent
mkimage is only able to package aarch32 binaries. Add support for AArch64 images. One can create a ARM64 image using the following command line: mkimage -T mtk_image -a 0x201000 -e 0x201000 -n "media=emmc;arm64=1" -d bl2.bin bl2.img Signed-off-by: Fabien Parent <fparent@baylibre.com>
2021-01-15Merge branch '2021.04-rc' of https://github.com/lftan/u-bootTom Rini
- Add ATF flow for SoC64 devices - Update socfpgaimage to support print header and update padding flow
2021-01-15tools: socfpgaimage: update padding flowLey Foon Tan
The existing socfpgaimage always pads the image to the maximum size of OCRAM size. This will break in the encryption flow where it expects the image to be un-padded. The encryption tool will do the encryption for the whole image and append the signature key at end of the image. The signature key will append to beyond the size of OCRAM if the image is padded with the maximum size before encryption. Move the padding step from socfpgaimage to Makefile and pads with objcopy command. socfpgaimage will pad the image with 16 bytes aligned (including CRC word), this is a requirement in encryption flow. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-01-15tools: socfpgaimage: Print image header informationLey Foon Tan
Print image header information if the header is verified. Example output from mkimage "-l" option: $ ./tools/mkimage -l spl/u-boot-spl.sfp Image Type : Cyclone V / Arria V SoC Image Validation word : 0x31305341 Version : 0x00000000 Flags : 0x00000000 Program length : 0x00003a59 Header checksum : 0x00000188 $ ./tools/mkimage -l spl/u-boot-spl.sfp Image Type : Arria 10 SoC Image Validation word : 0x31305341 Version : 0x00000001 Flags : 0x00000000 Header length : 0x00000014 Program length : 0x000138e0 Program entry : 0x00000014 Header checksum : 0x00000237 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-01-13tools: efivar.py unused variableHeinrich Schuchardt
Unused variables should be called '_'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
2021-01-13tools: efivar.py should check GUID when deletingHeinrich Schuchardt
When deleting a variable we must check that the GUID provided by the user matches the GUID of the variable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
2021-01-13tools: efivar.py: incorrect indentationHeinrich Schuchardt
According to https://pep8.org/#indentation we should use 4 spaces per indentation level. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
2021-01-13tools: efivar.py without argumentsHeinrich Schuchardt
When tools: efivar.py is called without arguments an error occurs: Traceback (most recent call last): File "tools/efivar.py", line 380, in <module> main() File "tools/efivar.py", line 360, in main args.func(args) AttributeError: 'Namespace' object has no attribute 'func' Show the online help if the arguments do not specify a function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
2021-01-11tools: mkimage: Add Allwinner eGON supportAndre Przywara
So far we used the separate mksunxiboot tool for generating a bootable image for Allwinner SPLs, probably just for historical reasons. Use the mkimage framework to generate a so called eGON image the Allwinner BROM expects. The new image type is called "sunxi_egon", to differentiate it from the (still to be implemented) secure boot TOC0 image. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-06Merge tag 'xilinx-for-v2021.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.04 arm64: - DT updates microblaze: - Add support for NOR device support spi: - Fix unaligned data write issue nand: - Minor code change xilinx: - Fru fix in limit calculation - Fill git repo link for all Xilinx boards video: - Add support for seps525 spi display tools: - Minor Vitis file support cmd/common - Minor code indentation fixes serial: - Uartlite debug uart initialization fix
2021-01-05Merge tag 'dm-pull-5jan21' of git://git.denx.de/u-boot-dm into nextTom Rini
Driver model: make some udevice fields private Driver model: Rename U_BOOT_DEVICE et al. dtoc: Tidy up and add more tests ns16550 code clean-up x86 and sandbox minor fixes for of-platdata dtoc prepration for adding build-time instantiation
2021-01-05Merge tag 'v2021.01-rc5' into nextTom Rini
Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-05dtoc: Tidy up src_scan testsSimon Glass
Some of these tests don't actually check anything. Add a few more checks to complete the tests. Also add a simple scan test that does the basics. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05dtoc: Move src_scan tests to a separate fileSimon Glass
Move the tests related to scanning into their own class, updating them to avoid using dtb_platdata as a pass-through. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-01-05dtoc: Split source-code scanning to a separate fileSimon Glass
Before expanding the scanning features any more, move this into a separate file. This will make it easier to maintain in the future. In particular, it reduces the size of dtb_platdata.py and allows us to add tests specifically for scanning, without going through that file. The pieces moved are the Driver class, the scanning code and the various naming functions, since they mostly depend on the scanning results. So far there is are no separate tests for src_scan. These will be added as new functionality appears. This introduces no functional change. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 08:00:20 +0000