From 229549a56d9ae413c00f64fd7c728c6879a1b54b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 9 Jun 2009 16:57:47 +0200 Subject: mpc512x: MPC5121ADS: Add NAND support This patch adds NAND support to the MPC5121ADS board. Please note that the image size increased since NAND support didn't fit in the current image size (256k). Signed-off-by: Stefan Roese Signed-off-by: Wolfgang Denk Cc: Wolfgang Denk --- board/freescale/mpc5121ads/mpc5121ads.c | 41 +++++++++++++++++++++++++++------ include/configs/mpc5121ads.h | 22 +++++++++++++++++- 2 files changed, 55 insertions(+), 8 deletions(-) diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 102e6ff8be9..ec74fd35d2d 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -31,6 +31,9 @@ #include #endif +#include +#include + DECLARE_GLOBAL_DATA_PTR; extern int mpc5121_diu_init(void); @@ -38,24 +41,48 @@ extern void ide_set_reset(int idereset); /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ CLOCK_SCCR1_DDR_EN | \ CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_NFC_EN | \ CLOCK_SCCR1_PATA_EN | \ CLOCK_SCCR1_PCI_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ CLOCK_SCCR1_TPR_EN) -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN | \ + CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN) #define CSAW_START(start) ((start) & 0xFFFF0000) #define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) long int fixed_sdram(void); +void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip); + +/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */ +extern int mpc5121_nfc_chip; + +/* Control chips select signal on MPC5121ADS board */ +void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip) +{ + unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09; + u8 v; + + v = in_8(csreg); + v |= 0x0F; + + if (chip >= 0) { + __mpc5121_nfc_select_chip(mtd, 0); + v &= ~(1 << mpc5121_nfc_chip); + } else { + __mpc5121_nfc_select_chip(mtd, -1); + } + + out_8(csreg, v); +} int board_early_init_f (void) { diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index dff7f1a4f12..45a004eb2c2 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -199,6 +199,26 @@ #undef CONFIG_SYS_FLASH_CHECKSUM +/* + * NAND FLASH + * drivers/mtd/nand/mpc5121_mpc.c (rev 2 silicon only) + */ +#define CONFIG_CMD_NAND +#define CONFIG_NAND_MPC5121_NFC +#define CONFIG_SYS_NAND_BASE 0x40000000 + +#define CONFIG_SYS_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ + +/* + * Configuration parameters for MPC5121 NAND driver + */ +#define CONFIG_FSL_NFC_WIDTH 1 +#define CONFIG_FSL_NFC_WRITE_SIZE 2048 +#define CONFIG_FSL_NFC_SPARE_SIZE 64 +#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE + /* * CPLD registers area is really only 32 bytes in size, but the smallest possible LP * window is 64KB @@ -222,7 +242,7 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ #else -- cgit v1.2.3