From 3483b75d94716191b354d046b4ed3f322500a3ee Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 26 Jan 2016 11:10:12 -0700 Subject: distro bootcmd: make net boot only optionally start USB Currently, the distro boot commands always enumerate USB devices before performing network operations. However, depending on the board and end- user configuration, network devices may not be attached to USB, and so enumerating USB may not be necessary. Enhance the scripts to make this step optional, so that the user can decrease boot time if they don't need USB. This change is performed by moving the "usb start" invocation into a standalone variable. If the user desires, they can replace that variable's value with some no-op command such as "true" instead. Booting from a USB storage device always needs to enumerate USB devices, so this action is still hard-coded. Signed-off-by: Stephen Warren Reviewed-by: Simon Glass --- doc/README.distro | 7 +++++++ include/config_distro_bootcmd.h | 11 ++++++----- 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/doc/README.distro b/doc/README.distro index 9e4722a86ee..019903ea7d9 100644 --- a/doc/README.distro +++ b/doc/README.distro @@ -341,6 +341,13 @@ scan_dev_for_scripts: If you want to disable boot.scr on all disks, set the value to something innocuous, e.g. setenv scan_dev_for_scripts true. +boot_net_usb_start: + + If you want to prevent USB enumeration by distro boot commands which execute + network operations, set the value to something innocuous, e.g. setenv + boot_net_usb_start true. This would be useful if you know your Ethernet + device is not attached to USB, and you wish to increase boot speed by + avoiding unnecessary actions. Interactively booting from a specific device at the u-boot prompt ================================================================= diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 66264ce3b47..c027d864396 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -140,15 +140,16 @@ #endif #ifdef CONFIG_CMD_USB -#define BOOTENV_RUN_USB_INIT "usb start; " +#define BOOTENV_RUN_NET_USB_START "run boot_net_usb_start; " #define BOOTENV_SHARED_USB \ + "boot_net_usb_start=usb start\0" \ "usb_boot=" \ - BOOTENV_RUN_USB_INIT \ + "usb start; " \ BOOTENV_SHARED_BLKDEV_BODY(usb) #define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV #else -#define BOOTENV_RUN_USB_INIT +#define BOOTENV_RUN_NET_USB_START #define BOOTENV_SHARED_USB #define BOOTENV_DEV_USB \ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB @@ -159,7 +160,7 @@ #if defined(CONFIG_CMD_DHCP) #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \ "bootcmd_dhcp=" \ - BOOTENV_RUN_USB_INIT \ + BOOTENV_RUN_NET_USB_START \ "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \ "source ${scriptaddr}; " \ "fi\0" @@ -175,7 +176,7 @@ #if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE) #define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \ "bootcmd_pxe=" \ - BOOTENV_RUN_USB_INIT \ + BOOTENV_RUN_NET_USB_START \ "dhcp; " \ "if pxe get; then " \ "pxe boot; " \ -- cgit v1.2.3