From 55b438a919901e486fae1618e7498cf5e63c2b86 Mon Sep 17 00:00:00 2001 From: Macpaul Lin Date: Tue, 20 Sep 2011 19:54:32 +0000 Subject: ftgmac100: reset fix when supports wake on lan This patch move the reset function from initialization to driver register procedure. Some embedded system supports wake on lan nowadays. On this kind of system, the ftgmac100 will be still supplied power after the system has been shut-down by Linux. Hence the register used by linux won't be clear when the system has been powered-off. The origin ftgmac100 driver in u-boot will only register driver and functions to network stack and won't reset the ftgmac100 hardware if the network won't be used during boot-up. This will lead ftgmac100 continue receiving packets and then might corrupt linux kernel when booting up. So we reorder the hardware reset function earlier to force the hardware to be reset whether it will be used or not. Signed-off-by: Macpaul Lin --- drivers/net/ftgmac100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c index dc7a80e5c77..821840f8e98 100644 --- a/drivers/net/ftgmac100.c +++ b/drivers/net/ftgmac100.c @@ -384,8 +384,6 @@ static int ftgmac100_init(struct eth_device *dev, bd_t *bd) debug("%s()\n", __func__); - ftgmac100_reset(dev); - /* set the ethernet address */ ftgmac100_set_mac_from_env(dev); @@ -561,6 +559,8 @@ int ftgmac100_initialize(bd_t *bd) eth_register(dev); + ftgmac100_reset(dev); + return 1; free_dev: -- cgit v1.2.3