From d5dae85f23c7c902731512e451afde9a6e4a250a Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 22 Apr 2013 15:43:02 +0200 Subject: fpga: zynq: Add support for loading bitstream Devcfg device requires to load bitstream in binary format. But u-boot also has an option for loading bitstream in bit format. Let's handle both cases by zynqpl driver. Also add suport for loading partial bitstreams. The first driver version was done by: Joe Hershberger Signed-off-by: Michal Simek Reviewed-by: Tom Rini --- arch/arm/cpu/armv7/zynq/slcr.c | 35 +++ arch/arm/include/asm/arch-zynq/hardware.h | 10 +- arch/arm/include/asm/arch-zynq/sys_proto.h | 3 + board/xilinx/zynq/board.c | 37 +++ drivers/fpga/Makefile | 1 + drivers/fpga/xilinx.c | 37 +++ drivers/fpga/zynqpl.c | 355 +++++++++++++++++++++++++++++ include/configs/zynq.h | 6 + include/xilinx.h | 4 + include/zynqpl.h | 59 +++++ 10 files changed, 545 insertions(+), 2 deletions(-) create mode 100644 drivers/fpga/zynqpl.c create mode 100644 include/zynqpl.h diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index 5a8674ab2cf..52048c67662 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -28,6 +28,9 @@ #define SLCR_LOCK_MAGIC 0x767B #define SLCR_UNLOCK_MAGIC 0xDF0D +#define SLCR_IDCODE_MASK 0x1F000 +#define SLCR_IDCODE_SHIFT 12 + static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ void zynq_slcr_lock(void) @@ -87,3 +90,35 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) out: zynq_slcr_lock(); } + +void zynq_slcr_devcfg_disable(void) +{ + zynq_slcr_unlock(); + + /* Disable AXI interface */ + writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl); + + /* Set Level Shifters DT618760 */ + writel(0xA, &slcr_base->lvl_shftr_en); + + zynq_slcr_lock(); +} + +void zynq_slcr_devcfg_enable(void) +{ + zynq_slcr_unlock(); + + /* Set Level Shifters DT618760 */ + writel(0xF, &slcr_base->lvl_shftr_en); + + /* Disable AXI interface */ + writel(0x0, &slcr_base->fpga_rst_ctrl); + + zynq_slcr_lock(); +} + +u32 zynq_slcr_get_idcode(void) +{ + return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >> + SLCR_IDCODE_SHIFT; +} diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index 6af892a7893..8b8a91ae65f 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -53,11 +53,17 @@ struct slcr_regs { u32 boot_mode; /* 0x25c */ u32 reserved4[116]; u32 trust_zone; /* 0x430 */ /* FIXME */ - u32 reserved5[115]; + u32 reserved5_1[63]; + u32 pss_idcode; /* 0x530 */ + u32 reserved5_2[51]; u32 ddr_urgent; /* 0x600 */ u32 reserved6[6]; u32 ddr_urgent_sel; /* 0x61c */ - u32 reserved7[188]; + u32 reserved7[56]; + u32 mio_pin[54]; /* 0x700 - 0x7D4 */ + u32 reserved8[74]; + u32 lvl_shftr_en; /* 0x900 */ + u32 reserved9[3]; u32 ocm_cfg; /* 0x910 */ }; diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index af9e7f8d4cc..2317121ca64 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -27,6 +27,9 @@ extern void zynq_slcr_lock(void); extern void zynq_slcr_unlock(void); extern void zynq_slcr_cpu_reset(void); extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk); +extern void zynq_slcr_devcfg_disable(void); +extern void zynq_slcr_devcfg_enable(void); +extern u32 zynq_slcr_get_idcode(void); /* Driver extern functions */ extern int zynq_sdhci_init(u32 regbase); diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 1589d21073b..b02c364dc9b 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -22,15 +22,52 @@ #include #include +#include #include #include DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_FPGA +Xilinx_desc fpga; + +/* It can be done differently */ +Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); +Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); +Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); +Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); +#endif + int board_init(void) { +#ifdef CONFIG_FPGA + u32 idcode; + + idcode = zynq_slcr_get_idcode(); + + switch (idcode) { + case XILINX_ZYNQ_7010: + fpga = fpga010; + break; + case XILINX_ZYNQ_7020: + fpga = fpga020; + break; + case XILINX_ZYNQ_7030: + fpga = fpga030; + break; + case XILINX_ZYNQ_7045: + fpga = fpga045; + break; + } +#endif + icache_enable(); +#ifdef CONFIG_FPGA + fpga_init(); + fpga_add(fpga_xilinx, &fpga); +#endif + return 0; } diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index b48f623c180..0b51dcdef37 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -30,6 +30,7 @@ COBJS-y += fpga.o COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o +COBJS-$(CONFIG_FPGA_ZYNQPL) += zynqpl.o COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o COBJS-$(CONFIG_FPGA_LATTICE) += ivm_core.o lattice.o ifdef CONFIG_FPGA_ALTERA diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index df5f9bf919b..496aa2f6eb7 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -1,4 +1,6 @@ /* + * (C) Copyright 2012-2013, Xilinx, Michal Simek + * * (C) Copyright 2002 * Rich Ireland, Enterasys Networks, rireland@enterasys.com. * Keith Outwater, keith_outwater@mvis.com @@ -31,6 +33,7 @@ #include #include #include +#include #if 0 #define FPGA_DEBUG @@ -170,6 +173,16 @@ int xilinx_load(Xilinx_desc *desc, const void *buf, size_t bsize) #else printf ("%s: No support for Virtex-II devices.\n", __FUNCTION__); +#endif + break; + case xilinx_zynq: +#if defined(CONFIG_FPGA_ZYNQPL) + PRINTF("%s: Launching the Zynq PL Loader...\n", + __func__); + ret_val = zynq_load(desc, buf, bsize); +#else + printf("%s: No support for Zynq devices.\n", + __func__); #endif break; @@ -217,6 +230,16 @@ int xilinx_dump(Xilinx_desc *desc, const void *buf, size_t bsize) #else printf ("%s: No support for Virtex-II devices.\n", __FUNCTION__); +#endif + break; + case xilinx_zynq: +#if defined(CONFIG_FPGA_ZYNQPL) + PRINTF("%s: Launching the Zynq PL Reader...\n", + __func__); + ret_val = zynq_dump(desc, buf, bsize); +#else + printf("%s: No support for Zynq devices.\n", + __func__); #endif break; @@ -244,6 +267,9 @@ int xilinx_info (Xilinx_desc * desc) case Xilinx_Virtex2: printf ("Virtex-II\n"); break; + case xilinx_zynq: + printf("Zynq PL\n"); + break; /* Add new family types here */ default: printf ("Unknown family type, %d\n", desc->family); @@ -269,6 +295,9 @@ int xilinx_info (Xilinx_desc * desc) case master_selectmap: printf ("Master SelectMap Mode\n"); break; + case devcfg: + printf("Device configuration interface (Zynq)\n"); + break; /* Add new interface types here */ default: printf ("Unsupported interface type, %d\n", desc->iface); @@ -308,6 +337,14 @@ int xilinx_info (Xilinx_desc * desc) __FUNCTION__); #endif break; + case xilinx_zynq: +#if defined(CONFIG_FPGA_ZYNQPL) + zynq_info(desc); +#else + /* just in case */ + printf("%s: No support for Zynq devices.\n", + __func__); +#endif /* Add new family types here */ default: /* we don't need a message here - we give one up above */ diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c new file mode 100644 index 00000000000..8feccdea482 --- /dev/null +++ b/drivers/fpga/zynqpl.c @@ -0,0 +1,355 @@ +/* + * (C) Copyright 2012-2013, Xilinx, Michal Simek + * + * (C) Copyright 2012 + * Joe Hershberger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#define DEVCFG_CTRL_PCFG_PROG_B 0x40000000 +#define DEVCFG_ISR_FATAL_ERROR_MASK 0x00740040 +#define DEVCFG_ISR_ERROR_FLAGS_MASK 0x00340840 +#define DEVCFG_ISR_RX_FIFO_OV 0x00040000 +#define DEVCFG_ISR_DMA_DONE 0x00002000 +#define DEVCFG_ISR_PCFG_DONE 0x00000004 +#define DEVCFG_STATUS_DMA_CMD_Q_F 0x80000000 +#define DEVCFG_STATUS_DMA_CMD_Q_E 0x40000000 +#define DEVCFG_STATUS_DMA_DONE_CNT_MASK 0x30000000 +#define DEVCFG_STATUS_PCFG_INIT 0x00000010 +#define DEVCFG_MCTRL_RFIFO_FLUSH 0x00000002 +#define DEVCFG_MCTRL_WFIFO_FLUSH 0x00000001 + +#ifndef CONFIG_SYS_FPGA_WAIT +#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ +#endif + +#ifndef CONFIG_SYS_FPGA_PROG_TIME +#define CONFIG_SYS_FPGA_PROG_TIME CONFIG_SYS_HZ /* 1 s */ +#endif + +int zynq_info(Xilinx_desc *desc) +{ + return FPGA_SUCCESS; +} + +#define DUMMY_WORD 0xffffffff + +/* Xilinx binary format header */ +static const u32 bin_format[] = { + DUMMY_WORD, /* Dummy words */ + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + 0x000000bb, /* Sync word */ + 0x11220044, /* Sync word */ + DUMMY_WORD, + DUMMY_WORD, + 0xaa995566, /* Sync word */ +}; + +#define SWAP_NO 1 +#define SWAP_DONE 2 + +/* + * Load the whole word from unaligned buffer + * Keep in your mind that it is byte loading on little-endian system + */ +static u32 load_word(const void *buf, u32 swap) +{ + u32 word = 0; + u8 *bitc = (u8 *)buf; + int p; + + if (swap == SWAP_NO) { + for (p = 0; p < 4; p++) { + word <<= 8; + word |= bitc[p]; + } + } else { + for (p = 3; p >= 0; p--) { + word <<= 8; + word |= bitc[p]; + } + } + + return word; +} + +static u32 check_header(const void *buf) +{ + u32 i, pattern; + int swap = SWAP_NO; + u32 *test = (u32 *)buf; + + debug("%s: Let's check bitstream header\n", __func__); + + /* Checking that passing bin is not a bitstream */ + for (i = 0; i < ARRAY_SIZE(bin_format); i++) { + pattern = load_word(&test[i], swap); + + /* + * Bitstreams in binary format are swapped + * compare to regular bistream. + * Do not swap dummy word but if swap is done assume + * that parsing buffer is binary format + */ + if ((__swab32(pattern) != DUMMY_WORD) && + (__swab32(pattern) == bin_format[i])) { + pattern = __swab32(pattern); + swap = SWAP_DONE; + debug("%s: data swapped - let's swap\n", __func__); + } + + debug("%s: %d/%x: pattern %x/%x bin_format\n", __func__, i, + (u32)&test[i], pattern, bin_format[i]); + if (pattern != bin_format[i]) { + debug("%s: Bitstream is not recognized\n", __func__); + return 0; + } + } + debug("%s: Found bitstream header at %x %s swapinng\n", __func__, + (u32)buf, swap == SWAP_NO ? "without" : "with"); + + return swap; +} + +static void *check_data(u8 *buf, size_t bsize, u32 *swap) +{ + u32 word, p = 0; /* possition */ + + /* Because buf doesn't need to be aligned let's read it by chars */ + for (p = 0; p < bsize; p++) { + word = load_word(&buf[p], SWAP_NO); + debug("%s: word %x %x/%x\n", __func__, word, p, (u32)&buf[p]); + + /* Find the first bitstream dummy word */ + if (word == DUMMY_WORD) { + debug("%s: Found dummy word at position %x/%x\n", + __func__, p, (u32)&buf[p]); + *swap = check_header(&buf[p]); + if (*swap) { + /* FIXME add full bitstream checking here */ + return &buf[p]; + } + } + /* Loop can be huge - support CTRL + C */ + if (ctrlc()) + return 0; + } + return 0; +} + + +int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) +{ + unsigned long ts; /* Timestamp */ + u32 partialbit = 0; + u32 i, control, isr_status, status, swap, diff; + u32 *buf_start; + + /* Detect if we are going working with partial or full bitstream */ + if (bsize != desc->size) { + printf("%s: Working with partial bitstream\n", __func__); + partialbit = 1; + } + + buf_start = check_data((u8 *)buf, bsize, &swap); + if (!buf_start) + return FPGA_FAIL; + + /* Check if data is postpone from start */ + diff = (u32)buf_start - (u32)buf; + if (diff) { + printf("%s: Bitstream is not validated yet (diff %x)\n", + __func__, diff); + return FPGA_FAIL; + } + + if ((u32)buf_start & 0x3) { + u32 *new_buf = (u32 *)((u32)buf & ~0x3); + + printf("%s: Align buffer at %x to %x(swap %d)\n", __func__, + (u32)buf_start, (u32)new_buf, swap); + + for (i = 0; i < (bsize/4); i++) + new_buf[i] = load_word(&buf_start[i], swap); + + swap = SWAP_DONE; + buf = new_buf; + } else if (swap != SWAP_DONE) { + /* For bitstream which are aligned */ + u32 *new_buf = (u32 *)buf; + + printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, + swap); + + for (i = 0; i < (bsize/4); i++) + new_buf[i] = load_word(&buf_start[i], swap); + + swap = SWAP_DONE; + } + + if (!partialbit) { + zynq_slcr_devcfg_disable(); + + /* Setting PCFG_PROG_B signal to high */ + control = readl(&devcfg_base->ctrl); + writel(control | DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl); + /* Setting PCFG_PROG_B signal to low */ + writel(control & ~DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl); + + /* Polling the PCAP_INIT status for Reset */ + ts = get_timer(0); + while (readl(&devcfg_base->status) & DEVCFG_STATUS_PCFG_INIT) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + printf("%s: Timeout wait for INIT to clear\n", + __func__); + return FPGA_FAIL; + } + } + + /* Setting PCFG_PROG_B signal to high */ + writel(control | DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl); + + /* Polling the PCAP_INIT status for Set */ + ts = get_timer(0); + while (!(readl(&devcfg_base->status) & + DEVCFG_STATUS_PCFG_INIT)) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + printf("%s: Timeout wait for INIT to set\n", + __func__); + return FPGA_FAIL; + } + } + } + + isr_status = readl(&devcfg_base->int_sts); + + /* Clear it all, so if Boot ROM comes back, it can proceed */ + writel(0xFFFFFFFF, &devcfg_base->int_sts); + + if (isr_status & DEVCFG_ISR_FATAL_ERROR_MASK) { + debug("%s: Fatal errors in PCAP 0x%X\n", __func__, isr_status); + + /* If RX FIFO overflow, need to flush RX FIFO first */ + if (isr_status & DEVCFG_ISR_RX_FIFO_OV) { + writel(DEVCFG_MCTRL_RFIFO_FLUSH, &devcfg_base->mctrl); + writel(0xFFFFFFFF, &devcfg_base->int_sts); + } + return FPGA_FAIL; + } + + status = readl(&devcfg_base->status); + + debug("%s: Status = 0x%08X\n", __func__, status); + + if (status & DEVCFG_STATUS_DMA_CMD_Q_F) { + debug("%s: Error: device busy\n", __func__); + return FPGA_FAIL; + } + + debug("%s: Device ready\n", __func__); + + if (!(status & DEVCFG_STATUS_DMA_CMD_Q_E)) { + if (!(readl(&devcfg_base->int_sts) & DEVCFG_ISR_DMA_DONE)) { + /* Error state, transfer cannot occur */ + debug("%s: ISR indicates error\n", __func__); + return FPGA_FAIL; + } else { + /* Clear out the status */ + writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts); + } + } + + if (status & DEVCFG_STATUS_DMA_DONE_CNT_MASK) { + /* Clear the count of completed DMA transfers */ + writel(DEVCFG_STATUS_DMA_DONE_CNT_MASK, &devcfg_base->status); + } + + debug("%s: Source = 0x%08X\n", __func__, (u32)buf); + debug("%s: Size = %zu\n", __func__, bsize); + + /* Set up the transfer */ + writel((u32)buf | 1, &devcfg_base->dma_src_addr); + writel(0xFFFFFFFF, &devcfg_base->dma_dst_addr); + writel(bsize >> 2, &devcfg_base->dma_src_len); + writel(0, &devcfg_base->dma_dst_len); + + isr_status = readl(&devcfg_base->int_sts); + + /* Polling the PCAP_INIT status for Set */ + ts = get_timer(0); + while (!(isr_status & DEVCFG_ISR_DMA_DONE)) { + if (isr_status & DEVCFG_ISR_ERROR_FLAGS_MASK) { + debug("%s: Error: isr = 0x%08X\n", __func__, + isr_status); + debug("%s: Write count = 0x%08X\n", __func__, + readl(&devcfg_base->write_count)); + debug("%s: Read count = 0x%08X\n", __func__, + readl(&devcfg_base->read_count)); + + return FPGA_FAIL; + } + if (get_timer(ts) > CONFIG_SYS_FPGA_PROG_TIME) { + printf("%s: Timeout wait for DMA to complete\n", + __func__); + return FPGA_FAIL; + } + isr_status = readl(&devcfg_base->int_sts); + } + + debug("%s: DMA transfer is done\n", __func__); + + /* Check FPGA configuration completion */ + ts = get_timer(0); + while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + printf("%s: Timeout wait for FPGA to config\n", + __func__); + return FPGA_FAIL; + } + isr_status = readl(&devcfg_base->int_sts); + } + + debug("%s: FPGA config done\n", __func__); + + /* Clear out the DMA status */ + writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts); + + if (!partialbit) + zynq_slcr_devcfg_enable(); + + return FPGA_SUCCESS; +} + +int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +{ + return FPGA_FAIL; +} diff --git a/include/configs/zynq.h b/include/configs/zynq.h index f1f182edfb9..38f04f642b9 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -88,6 +88,12 @@ # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ #endif +/* Enable the PL to be downloaded */ +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_ZYNQPL +#define CONFIG_CMD_FPGA + #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY diff --git a/include/xilinx.h b/include/xilinx.h index 5f25b7a8a96..592cbea1f30 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -33,10 +33,12 @@ #define CONFIG_SYS_VIRTEX_E CONFIG_SYS_FPGA_DEV( 0x2 ) #define CONFIG_SYS_VIRTEX2 CONFIG_SYS_FPGA_DEV( 0x4 ) #define CONFIG_SYS_SPARTAN3 CONFIG_SYS_FPGA_DEV( 0x8 ) +#define CONFIG_SYS_ZYNQ CONFIG_SYS_FPGA_DEV(0x10) #define CONFIG_SYS_XILINX_SPARTAN2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN2) #define CONFIG_SYS_XILINX_VIRTEX_E (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX_E) #define CONFIG_SYS_XILINX_VIRTEX2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX2) #define CONFIG_SYS_XILINX_SPARTAN3 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN3) +#define CONFIG_SYS_XILINX_ZYNQ (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_ZYNQ) /* XXX - Add new models here */ @@ -59,6 +61,7 @@ typedef enum { /* typedef Xilinx_iface */ jtag_mode, /* jtag/tap serial (not used ) */ master_selectmap, /* master SelectMap (virtex2) */ slave_selectmap, /* slave SelectMap (virtex2) */ + devcfg, /* devcfg interface (zynq) */ max_xilinx_iface_type /* insert all new types before this */ } Xilinx_iface; /* end, typedef Xilinx_iface */ @@ -68,6 +71,7 @@ typedef enum { /* typedef Xilinx_Family */ Xilinx_VirtexE, /* Virtex-E Family */ Xilinx_Virtex2, /* Virtex2 Family */ Xilinx_Spartan3, /* Spartan-III Family */ + xilinx_zynq, /* Zynq Family */ max_xilinx_type /* insert all new types before this */ } Xilinx_Family; /* end, typedef Xilinx_Family */ diff --git a/include/zynqpl.h b/include/zynqpl.h new file mode 100644 index 00000000000..bc9b9481595 --- /dev/null +++ b/include/zynqpl.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2012-2013, Xilinx, Michal Simek + * + * (C) Copyright 2012 + * Joe Hershberger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ZYNQPL_H_ +#define _ZYNQPL_H_ + +#include + +extern int zynq_load(Xilinx_desc *desc, const void *image, size_t size); +extern int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +extern int zynq_info(Xilinx_desc *desc); + +#define XILINX_ZYNQ_7010 0x2 +#define XILINX_ZYNQ_7020 0x7 +#define XILINX_ZYNQ_7030 0xc +#define XILINX_ZYNQ_7045 0x11 + +/* Device Image Sizes */ +#define XILINX_XC7Z010_SIZE 16669920/8 +#define XILINX_XC7Z020_SIZE 32364512/8 +#define XILINX_XC7Z030_SIZE 47839328/8 +#define XILINX_XC7Z045_SIZE 106571232/8 + +/* Descriptor Macros */ +#define XILINX_XC7Z010_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie } + +#define XILINX_XC7Z020_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie } + +#define XILINX_XC7Z030_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie } + +#define XILINX_XC7Z045_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie } + +#endif /* _ZYNQPL_H_ */ -- cgit v1.2.3