From e88d2a57f3a01c774471e32bf35d871682cfffe8 Mon Sep 17 00:00:00 2001
From: Andre Przywara
Date: Wed, 4 Apr 2018 01:31:18 +0100
Subject: arm: dts: sunxi: update H3 to new EMAC binding

The U-Boot driver for the sun8i-emac was using some preliminary DT
binding. Now since Linux got its own driver in v4.15 and our driver
can now cope with both bindings, let's convert the DT nodes used by the
various H3 boards over to the new bindings used by the kernel.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
---
 arch/arm/dts/sun8i-h3.dtsi | 69 ++++++++++++++++++++++++++++++++++------------
 1 file changed, 51 insertions(+), 18 deletions(-)

(limited to 'arch/arm/dts/sun8i-h3.dtsi')

diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
index afa60793a23..d9d31fa3f50 100644
--- a/arch/arm/dts/sun8i-h3.dtsi
+++ b/arch/arm/dts/sun8i-h3.dtsi
@@ -144,9 +144,10 @@
 		#size-cells = <1>;
 		ranges;
 
-		syscon: syscon@01c00000 {
-			compatible = "allwinner,sun8i-h3-syscon","syscon";
-			reg = <0x01c00000 0x34>;
+		syscon: syscon@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-controller",
+				     "syscon";
+			reg = <0x01c00000 0x1000>;
 		};
 
 		dma: dma-controller@01c02000 {
@@ -339,15 +340,12 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
-			emac_rgmii_pins: emac0@0 {
-				allwinner,pins = "PD0", "PD1", "PD2", "PD3",
-						"PD4", "PD5", "PD7",
-						"PD8", "PD9", "PD10",
-						"PD12", "PD13", "PD15",
-						"PD16", "PD17";
-				allwinner,function = "emac";
-				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			emac_rgmii_pins: emac0 {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD7", "PD8", "PD9", "PD10",
+				       "PD12", "PD13", "PD15", "PD16", "PD17";
+				function = "emac";
+				drive-strength = <40>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
@@ -466,16 +464,51 @@
 
 		emac: ethernet@1c30000 {
 			compatible = "allwinner,sun8i-h3-emac";
-			reg = <0x01c30000 0x104>, <0x01c00030 0x4>;
-			reg-names = "emac", "syscon";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>;
-			reset-names = "ahb", "ephy";
-			clocks = <&ccu CLK_BUS_EMAC>, <&ccu CLK_BUS_EPHY>;
-			clock-names = "ahb", "ephy";
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+
+				external_mdio: mdio@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
 		};
 
 		gic: interrupt-controller@01c81000 {
-- 
cgit v1.2.3