From 2c62c56a86e16cc1f90a7603ea8fcbf0fd773dae Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 4 Nov 2015 14:25:13 +0800 Subject: gpio: atmel: Add the PIO4 driver support The PIO4 is introduced from SAMA5D2, as a new version for Atmel PIO controller. Signed-off-by: Wenyou Yang --- arch/arm/mach-at91/include/mach/atmel_pio4.h | 48 ++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 arch/arm/mach-at91/include/mach/atmel_pio4.h (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/include/mach/atmel_pio4.h b/arch/arm/mach-at91/include/mach/atmel_pio4.h new file mode 100644 index 00000000000..8bb4b12b269 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/atmel_pio4.h @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2015 Atmel Corporation. + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ATMEL_PIO4_H +#define __ATMEL_PIO4_H + +#ifndef __ASSEMBLY__ + +struct atmel_pio4_port { + u32 mskr; /* 0x00 PIO Mask Register */ + u32 cfgr; /* 0x04 PIO Configuration Register */ + u32 pdsr; /* 0x08 PIO Pin Data Status Register */ + u32 locksr; /* 0x0C PIO Lock Status Register */ + u32 sodr; /* 0x10 PIO Set Output Data Register */ + u32 codr; /* 0x14 PIO Clear Output Data Register */ + u32 odsr; /* 0x18 PIO Output Data Status Register */ + u32 reserved0; + u32 ier; /* 0x20 PIO Interrupt Enable Register */ + u32 idr; /* 0x24 PIO Interrupt Disable Register */ + u32 imr; /* 0x28 PIO Interrupt Mask Register */ + u32 isr; /* 0x2C PIO Interrupt Status Register */ + u32 reserved1[3]; + u32 iofr; /* 0x3C PIO I/O Freeze Register */ +}; + +#endif + +#define AT91_PIO_PORTA 0x0 +#define AT91_PIO_PORTB 0x1 +#define AT91_PIO_PORTC 0x2 +#define AT91_PIO_PORTD 0x3 + +int atmel_pio4_set_gpio(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 use_pullup); +int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value); +int atmel_pio4_get_pio_input(u32 port, u32 pin); + +#endif -- cgit v1.2.3 From 75238f236735467d53916aa5bdafbe89ce94f9fb Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Fri, 30 Oct 2015 09:55:52 +0800 Subject: arm: atmel: Add SAMA5D2 Xplained board The board supports following features: - Boot media support: SD card/e.MMC/SPI flash, - Support LCD display (optional, disabled by default), - Support ethernet, - Support USB mass storage. Signed-off-by: Wenyou Yang [fix checkpatch warnings] Signed-off-by: Andreas Bießmann --- arch/arm/mach-at91/Kconfig | 5 + arch/arm/mach-at91/armv7/Makefile | 1 + arch/arm/mach-at91/armv7/sama5d2_devices.c | 57 +++++ arch/arm/mach-at91/include/mach/at91_pmc.h | 9 +- arch/arm/mach-at91/include/mach/atmel_usba_udc.h | 3 +- arch/arm/mach-at91/include/mach/hardware.h | 2 + arch/arm/mach-at91/include/mach/sama5d2.h | 203 ++++++++++++++++ board/atmel/sama5d2_xplained/Kconfig | 15 ++ board/atmel/sama5d2_xplained/MAINTAINERS | 7 + board/atmel/sama5d2_xplained/Makefile | 8 + board/atmel/sama5d2_xplained/sama5d2_xplained.c | 283 +++++++++++++++++++++++ configs/sama5d2_xplained_mmc_defconfig | 11 + configs/sama5d2_xplained_spiflash_defconfig | 11 + include/configs/sama5d2_xplained.h | 122 ++++++++++ 14 files changed, 731 insertions(+), 6 deletions(-) create mode 100644 arch/arm/mach-at91/armv7/sama5d2_devices.c create mode 100644 arch/arm/mach-at91/include/mach/sama5d2.h create mode 100644 board/atmel/sama5d2_xplained/Kconfig create mode 100644 board/atmel/sama5d2_xplained/MAINTAINERS create mode 100644 board/atmel/sama5d2_xplained/Makefile create mode 100644 board/atmel/sama5d2_xplained/sama5d2_xplained.c create mode 100644 configs/sama5d2_xplained_mmc_defconfig create mode 100644 configs/sama5d2_xplained_spiflash_defconfig create mode 100644 include/configs/sama5d2_xplained.h (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index fdaf3287220..c33364758bd 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -71,6 +71,10 @@ config TARGET_AT91SAM9X5EK select CPU_ARM926EJS select SUPPORT_SPL +config TARGET_SAMA5D2_XPLAINED + bool "SAMA5D2 Xplained board" + select CPU_V7 + config TARGET_SAMA5D3_XPLAINED bool "SAMA5D3 Xplained board" select CPU_V7 @@ -123,6 +127,7 @@ source "board/atmel/at91sam9m10g45ek/Kconfig" source "board/atmel/at91sam9n12ek/Kconfig" source "board/atmel/at91sam9rlek/Kconfig" source "board/atmel/at91sam9x5ek/Kconfig" +source "board/atmel/sama5d2_xplained/Kconfig" source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig" source "board/atmel/sama5d4_xplained/Kconfig" diff --git a/arch/arm/mach-at91/armv7/Makefile b/arch/arm/mach-at91/armv7/Makefile index f4f35a4bc19..9538bc1fad2 100644 --- a/arch/arm/mach-at91/armv7/Makefile +++ b/arch/arm/mach-at91/armv7/Makefile @@ -8,6 +8,7 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-$(CONFIG_SAMA5D2) += sama5d2_devices.o obj-$(CONFIG_SAMA5D3) += sama5d3_devices.o obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o obj-y += clock.o diff --git a/arch/arm/mach-at91/armv7/sama5d2_devices.c b/arch/arm/mach-at91/armv7/sama5d2_devices.c new file mode 100644 index 00000000000..88f8f2c53d7 --- /dev/null +++ b/arch/arm/mach-at91/armv7/sama5d2_devices.c @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2015 Atmel Corporation + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_sama5d2()) { + switch (extension_id) { + case ARCH_EXID_SAMA5D21CU: + return "SAMA5D21"; + case ARCH_EXID_SAMA5D22CU: + return "SAMA5D22-CU"; + case ARCH_EXID_SAMA5D22CN: + return "SAMA5D22-CN"; + case ARCH_EXID_SAMA5D23CU: + return "SAMA5D23-CU"; + case ARCH_EXID_SAMA5D24CX: + return "SAMA5D24-CX"; + case ARCH_EXID_SAMA5D24CU: + return "SAMA5D24-CU"; + case ARCH_EXID_SAMA5D26CU: + return "SAMA5D26-CU"; + case ARCH_EXID_SAMA5D27CU: + return "SAMA5D27-CU"; + case ARCH_EXID_SAMA5D27CN: + return "SAMA5D27-CN"; + case ARCH_EXID_SAMA5D28CU: + return "SAMA5D28-CU"; + case ARCH_EXID_SAMA5D28CN: + return "SAMA5D28-CN"; + } + } + + return "Unknown CPU type"; +} + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA +void at91_udp_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); + + at91_periph_clk_enable(ATMEL_ID_UDPHS); +} +#endif diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 5a51be62882..3f50f7718ff 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -78,7 +78,8 @@ typedef struct at91_pmc { #define AT91_PMC_PLLXR_DIV(x) (x & 0xFF) #define AT91_PMC_PLLXR_PLLCOUNT(x) ((x & 0x3F) << 8) #define AT91_PMC_PLLXR_OUT(x) ((x & 0x03) << 14) -#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) +#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \ + defined(CONFIG_SAMA5D4) #define AT91_PMC_PLLXR_MUL(x) ((x & 0x7F) << 18) #else #define AT91_PMC_PLLXR_MUL(x) ((x & 0x7FF) << 16) @@ -97,7 +98,8 @@ typedef struct at91_pmc { #define AT91_PMC_MCKR_CSS_PLLB 0x00000003 #define AT91_PMC_MCKR_CSS_MASK 0x00000003 -#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \ +#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \ + defined(CONFIG_SAMA5D4) || \ defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12) #define AT91_PMC_MCKR_PRES_1 0x00000000 #define AT91_PMC_MCKR_PRES_2 0x00000010 @@ -127,10 +129,7 @@ typedef struct at91_pmc { #else #define AT91_PMC_MCKR_MDIV_1 0x00000000 #define AT91_PMC_MCKR_MDIV_2 0x00000100 -#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \ - defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12) #define AT91_PMC_MCKR_MDIV_3 0x00000300 -#endif #define AT91_PMC_MCKR_MDIV_4 0x00000200 #define AT91_PMC_MCKR_MDIV_MASK 0x00000300 #endif diff --git a/arch/arm/mach-at91/include/mach/atmel_usba_udc.h b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h index 38b5012fce5..46a329b1526 100644 --- a/arch/arm/mach-at91/include/mach/atmel_usba_udc.h +++ b/arch/arm/mach-at91/include/mach/atmel_usba_udc.h @@ -31,7 +31,8 @@ static struct usba_ep_data usba_udc_ep[] = { EP("ep5", 5, 1024, 3, 1, 1), EP("ep6", 6, 1024, 3, 1, 1), }; -#elif defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) +#elif defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \ + defined(CONFIG_SAMA5D4) static struct usba_ep_data usba_udc_ep[] = { EP("ep0", 0, 64, 1, 0, 0), EP("ep1", 1, 1024, 3, 1, 0), diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index ff6b71b1357..38abfda84ee 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -23,6 +23,8 @@ # include #elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) # include +#elif defined(CONFIG_SAMA5D2) +# include #elif defined(CONFIG_SAMA5D3) # include #elif defined(CONFIG_SAMA5D4) diff --git a/arch/arm/mach-at91/include/mach/sama5d2.h b/arch/arm/mach-at91/include/mach/sama5d2.h new file mode 100644 index 00000000000..c85571c999e --- /dev/null +++ b/arch/arm/mach-at91/include/mach/sama5d2.h @@ -0,0 +1,203 @@ +/* + * Chip-specific header file for the SAMA5D2 SoC + * + * Copyright (C) 2015 Atmel + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SAMA5D2_H +#define __SAMA5D2_H + +/* + * definitions to be used in other places + */ +#define CONFIG_AT91FAMILY /* It's a member of AT91 */ + +/* + * Peripheral identifiers/interrupts. + */ +#define ATMEL_ID_FIQ 0 /* FIQ Interrupt ID */ +/* 1 */ +#define ATMEL_ID_ARM 2 /* Performance Monitor Unit */ +#define ATMEL_ID_PIT 3 /* Periodic Interval Timer Interrupt */ +#define ATMEL_ID_WDT 4 /* Watchdog Timer Interrupt */ +#define ATMEL_ID_GMAC 5 /* Ethernet MAC */ +#define ATMEL_ID_XDMAC0 6 /* DMA Controller 0 */ +#define ATMEL_ID_XDMAC1 7 /* DMA Controller 1 */ +#define ATMEL_ID_ICM 8 /* Integrity Check Monitor */ +#define ATMEL_ID_AES 9 /* Advanced Encryption Standard */ +#define ATMEL_ID_AESB 10 /* AES bridge */ +#define ATMEL_ID_TDES 11 /* Triple Data Encryption Standard */ +#define ATMEL_ID_SHA 12 /* SHA Signature */ +#define ATMEL_ID_MPDDRC 13 /* MPDDR Controller */ +#define ATMEL_ID_MATRIX1 14 /* H32MX, 32-bit AHB Matrix */ +#define ATMEL_ID_MATRIX0 15 /* H64MX, 64-bit AHB Matrix */ +#define ATMEL_ID_SECUMOD 16 /* Secure Module */ +#define ATMEL_ID_HSMC 17 /* Multi-bit ECC interrupt */ +#define ATMEL_ID_PIOA 18 /* Parallel I/O Controller A */ +#define ATMEL_ID_FLEXCOM0 19 /* FLEXCOM0 */ +#define ATMEL_ID_FLEXCOM1 20 /* FLEXCOM1 */ +#define ATMEL_ID_FLEXCOM2 21 /* FLEXCOM2 */ +#define ATMEL_ID_FLEXCOM3 22 /* FLEXCOM3 */ +#define ATMEL_ID_FLEXCOM4 23 /* FLEXCOM4 */ +#define ATMEL_ID_UART0 24 /* UART0 */ +#define ATMEL_ID_UART1 25 /* UART1 */ +#define ATMEL_ID_UART2 26 /* UART2 */ +#define ATMEL_ID_UART3 27 /* UART3 */ +#define ATMEL_ID_UART4 28 /* UART4 */ +#define ATMEL_ID_TWIHS0 29 /* Two-wire Interface 0 */ +#define ATMEL_ID_TWIHS1 30 /* Two-wire Interface 1 */ +#define ATMEL_ID_SDMMC0 31 /* Secure Data Memory Card Controller 0 */ +#define ATMEL_ID_SDMMC1 32 /* Secure Data Memory Card Controller 1 */ +#define ATMEL_ID_SPI0 33 /* Serial Peripheral Interface 0 */ +#define ATMEL_ID_SPI1 34 /* Serial Peripheral Interface 1 */ +#define ATMEL_ID_TC0 35 /* Timer Counter 0 (ch.0,1,2) */ +#define ATMEL_ID_TC1 36 /* Timer Counter 1 (ch.3,4,5) */ +/* 37 */ +#define ATMEL_ID_PWM 38 /* PWMController0 (ch. 0,1,2,3) */ +/* 39 */ +#define ATMEL_ID_ADC 40 /* Touch Screen ADC Controller */ +#define ATMEL_ID_UHPHS 41 /* USB Host High Speed */ +#define ATMEL_ID_UDPHS 42 /* USB Device High Speed */ +#define ATMEL_ID_SSC0 43 /* Serial Synchronous Controller 0 */ +#define ATMEL_ID_SSC1 44 /* Serial Synchronous Controller 1 */ +#define ATMEL_ID_LCDC 45 /* LCD Controller */ +#define ATMEL_ID_ISI 46 /* Image Sensor Controller, for A5D2, named after ISC */ +#define ATMEL_ID_TRNG 47 /* True Random Number Generator */ +#define ATMEL_ID_PDMIC 48 /* PDM Interface Controller */ +#define ATMEL_ID_AIC_IRQ 49 /* IRQ Interrupt ID */ +#define ATMEL_ID_SFC 50 /* Fuse Controller */ +#define ATMEL_ID_SECURAM 51 /* Secure RAM */ +#define ATMEL_ID_QSPI0 52 /* QSPI0 */ +#define ATMEL_ID_QSPI1 53 /* QSPI1 */ +#define ATMEL_ID_I2SC0 54 /* Inter-IC Sound Controller 0 */ +#define ATMEL_ID_I2SC1 55 /* Inter-IC Sound Controller 1 */ +#define ATMEL_ID_CAN0_INT0 56 /* MCAN 0 Interrupt0 */ +#define ATMEL_ID_CAN1_INT0 57 /* MCAN 1 Interrupt0 */ +/* 58 */ +#define ATMEL_ID_CLASSD 59 /* Audio Class D Amplifier */ +#define ATMEL_ID_SFR 60 /* Special Function Register */ +#define ATMEL_ID_SAIC 61 /* Secured AIC */ +#define ATMEL_ID_AIC 62 /* Advanced Interrupt Controller */ +#define ATMEL_ID_L2CC 63 /* L2 Cache Controller */ +#define ATMEL_ID_CAN0_INT1 64 /* MCAN 0 Interrupt1 */ +#define ATMEL_ID_CAN1_INT1 65 /* MCAN 1 Interrupt1 */ +#define ATMEL_ID_GMAC_Q1 66 /* GMAC Queue 1 Interrupt */ +#define ATMEL_ID_GMAC_Q2 67 /* GMAC Queue 2 Interrupt */ +#define ATMEL_ID_PIOB 68 /* Parallel I/O Controller B */ +#define ATMEL_ID_PIOC 69 /* Parallel I/O Controller C */ +#define ATMEL_ID_PIOD 70 /* Parallel I/O Controller D */ +#define ATMEL_ID_SDMMC0_TIMER 71 /* Secure Data Memory Card Controller 0 (TIMER) */ +#define ATMEL_ID_SDMMC1_TIMER 72 /* Secure Data Memory Card Controller 1 (TIMER) */ +/* 73 */ +#define ATMEL_ID_SYS 74 /* System Controller Interrupt */ +#define ATMEL_ID_ACC 75 /* Analog Comparator */ +#define ATMEL_ID_RXLP 76 /* UART Low-Power */ +#define ATMEL_ID_SFRBU 77 /* Special Function Register BackUp */ +#define ATMEL_ID_CHIPID 78 /* Chip ID */ + +/* + * User Peripherals physical base addresses. + */ +#define ATMEL_BASE_LCDC 0xf0000000 +#define ATMEL_BASE_XDMAC1 0xf0004000 +#define ATMEL_BASE_MPDDRC 0xf000c000 +#define ATMEL_BASE_XDMAC0 0xf0010000 +#define ATMEL_BASE_PMC 0xf0014000 +#define ATMEL_BASE_QSPI0 0xf0020000 +#define ATMEL_BASE_QSPI1 0xf0024000 +#define ATMEL_BASE_SPI0 0xf8000000 +#define ATMEL_BASE_GMAC 0xf8008000 +#define ATMEL_BASE_TC0 0xf800c000 +#define ATMEL_BASE_TC1 0xf8010000 +#define ATMEL_BASE_HSMC 0xf8014000 +#define ATMEL_BASE_UART0 0xf801c000 +#define ATMEL_BASE_UART1 0xf8020000 +#define ATMEL_BASE_UART2 0xf8024000 +#define ATMEL_BASE_TWI0 0xf8028000 +#define ATMEL_BASE_SYSC 0xf8048000 +#define ATMEL_BASE_SPI1 0xfc000000 +#define ATMEL_BASE_UART3 0xfc008000 +#define ATMEL_BASE_UART4 0xfc00c000 +#define ATMEL_BASE_TWI1 0xfc028000 +#define ATMEL_BASE_UDPHS 0xfc02c000 + +#define ATMEL_BASE_PIOA 0xfc038000 + +#define ATMEL_CHIPID_CIDR 0xfc069000 +#define ATMEL_CHIPID_EXID 0xfc069004 + +/* + * Address Memory Space + */ +#define ATMEL_BASE_DDRCS 0x20000000 +#define ATMEL_BASE_QSPI0_AES_MEM 0x90000000 +#define ATMEL_BASE_QSPI1_AES_MEM 0x98000000 +#define ATMEL_BASE_SDMMC0 0xa0000000 +#define ATMEL_BASE_SDMMC1 0xb0000000 +#define ATMEL_BASE_QSPI0_MEM 0xd0000000 +#define ATMEL_BASE_QSPI1_MEM 0xd8000000 + +/* + * Internal Memories + */ +#define ATMEL_BASE_UDPHS_FIFO 0x00300000 /* USB Device HS controller */ +#define ATMEL_BASE_OHCI 0x00400000 /* USB Host controller (OHCI) */ +#define ATMEL_BASE_EHCI 0x00500000 /* USB Host controller (EHCI) */ + +/* + * SYSC Spawns + */ +#define ATMEL_BASE_RSTC ATMEL_BASE_SYSC +#define ATMEL_BASE_SHDWC (ATMEL_BASE_SYSC + 0x10) +#define ATMEL_BASE_PIT (ATMEL_BASE_SYSC + 0x30) +#define ATMEL_BASE_WDT (ATMEL_BASE_SYSC + 0x40) +#define ATMEL_BASE_SCKC (ATMEL_BASE_SYSC + 0x50) +#define ATMEL_BASE_RTC (ATMEL_BASE_SYSC + 0xb0) + +/* + * Other misc definitions + */ +#define ATMEL_BASE_PMECC (ATMEL_BASE_HSMC + 0x70) +#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_HSMC + 0x500) + +#define ATMEL_BASE_PIOB (ATMEL_BASE_PIOA + 0x40) +#define ATMEL_BASE_PIOC (ATMEL_BASE_PIOB + 0x40) +#define ATMEL_BASE_PIOD (ATMEL_BASE_PIOC + 0x40) + +#define ATMEL_PIO_PORTS 4 +#define CPU_HAS_PCR +#define CPU_HAS_H32MXDIV + +/* SAMA5D2 series chip id definitions */ +#define ARCH_ID_SAMA5D2 0x8a5c08c0 +#define ARCH_EXID_SAMA5D21CU 0x0000005a +#define ARCH_EXID_SAMA5D22CU 0x00000059 +#define ARCH_EXID_SAMA5D22CN 0x00000069 +#define ARCH_EXID_SAMA5D23CU 0x00000058 +#define ARCH_EXID_SAMA5D24CX 0x00000004 +#define ARCH_EXID_SAMA5D24CU 0x00000014 +#define ARCH_EXID_SAMA5D26CU 0x00000012 +#define ARCH_EXID_SAMA5D27CU 0x00000011 +#define ARCH_EXID_SAMA5D27CN 0x00000021 +#define ARCH_EXID_SAMA5D28CU 0x00000010 +#define ARCH_EXID_SAMA5D28CN 0x00000020 + +#define cpu_is_sama5d2() (get_chip_id() == ARCH_ID_SAMA5D2) + +/* PIT Timer(PIT_PIIR) */ +#define CONFIG_SYS_TIMER_COUNTER 0xf804803c + +/* No PMECC Galois table in ROM */ +#define NO_GALOIS_TABLE_IN_ROM + +#ifndef __ASSEMBLY__ +unsigned int get_chip_id(void); +unsigned int get_extension_chip_id(void); +unsigned int has_lcdc(void); +char *get_cpu_name(void); +#endif + +#endif diff --git a/board/atmel/sama5d2_xplained/Kconfig b/board/atmel/sama5d2_xplained/Kconfig new file mode 100644 index 00000000000..55712e97454 --- /dev/null +++ b/board/atmel/sama5d2_xplained/Kconfig @@ -0,0 +1,15 @@ +if TARGET_SAMA5D2_XPLAINED + +config SYS_BOARD + default "sama5d2_xplained" + +config SYS_VENDOR + default "atmel" + +config SYS_SOC + default "at91" + +config SYS_CONFIG_NAME + default "sama5d2_xplained" + +endif diff --git a/board/atmel/sama5d2_xplained/MAINTAINERS b/board/atmel/sama5d2_xplained/MAINTAINERS new file mode 100644 index 00000000000..ff9c86f5380 --- /dev/null +++ b/board/atmel/sama5d2_xplained/MAINTAINERS @@ -0,0 +1,7 @@ +SAMA5D2 XPLAINED BOARD +M: Wenyou Yang +S: Maintained +F: board/atmel/sama5d2_xplained/ +F: include/configs/sama5d2_xplained.h +F: configs/sama5d2_xplained_mmc_defconfig +F: configs/sama5d2_xplained_spiflash_defconfig diff --git a/board/atmel/sama5d2_xplained/Makefile b/board/atmel/sama5d2_xplained/Makefile new file mode 100644 index 00000000000..420870b561a --- /dev/null +++ b/board/atmel/sama5d2_xplained/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2015 Atmel Corporation +# Wenyou Yang +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += sama5d2_xplained.o diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c new file mode 100644 index 00000000000..0b3397fa090 --- /dev/null +++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c @@ -0,0 +1,283 @@ +/* + * Copyright (C) 2015 Atmel Corporation + * Wenyou.Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1); +} + +static void board_spi0_hw_init(void) +{ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0); + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0); + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0); + + atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1); + + at91_periph_clk_enable(ATMEL_ID_SPI0); +} + +static void board_usb_hw_init(void) +{ + atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1); +} + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + .vl_col = 480, + .vl_row = 272, + .vl_clk = 9000000, + .vl_bpix = LCD_BPP, + .vl_tft = 1, + .vl_hsync_len = 41, + .vl_left_margin = 2, + .vl_right_margin = 2, + .vl_vsync_len = 11, + .vl_upper_margin = 2, + .vl_lower_margin = 2, + .mmio = ATMEL_BASE_LCDC, +}; + +/* No power up/down pin for the LCD pannel */ +void lcd_enable(void) { /* Empty! */ } +void lcd_disable(void) { /* Empty! */ } + +unsigned int has_lcdc(void) +{ + return 1; +} + +static void board_lcd_hw_init(void) +{ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDPWM */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDISP */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDVSYNC */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0); /* LCDHSYNC */ + atmel_pio4_set_a_periph(AT91_PIO_PORTD, 0, 0); /* LCDPCK */ + atmel_pio4_set_a_periph(AT91_PIO_PORTD, 1, 0); /* LCDDEN */ + + /* LCDDAT0 */ + /* LCDDAT1 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDDAT2 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDDAT3 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDDAT4 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDDAT5 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDDAT6 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDDAT7 */ + + /* LCDDAT8 */ + /* LCDDAT9 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDDAT10 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDDAT11 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDDAT12 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDDAT13 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDDAT14 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDDAT15 */ + + /* LCDD16 */ + /* LCDD17 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDDAT18 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDDAT19 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDAT20 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0); /* LCDDAT21 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDDAT22 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDDAT23 */ + + at91_periph_clk_enable(ATMEL_ID_LCDC); +} + +#ifdef CONFIG_LCD_INFO +void lcd_show_board_info(void) +{ + ulong dram_size; + int i; + char temp[32]; + + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_printf("2015 ATMEL Corp\n"); + lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + + lcd_printf("%ld MB SDRAM\n", dram_size >> 20); +} +#endif /* CONFIG_LCD_INFO */ +#endif /* CONFIG_LCD */ + +static void board_gmac_hw_init(void) +{ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0); /* GTXCK */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0); /* GTXEN */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0); /* GRXDV */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0); /* GRXER */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0); /* GRX0 */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0); /* GRX1 */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0); /* GTX0 */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0); /* GTX1 */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0); /* GMDC */ + atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0); /* GMDIO */ + + at91_periph_clk_enable(ATMEL_ID_GMAC); +} + +static void board_sdhci0_hw_init(void) +{ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0); /* SDMMC0_CK */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0); /* SDMMC0_CMD */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0); /* SDMMC0_DAT0 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0); /* SDMMC0_DAT1 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0); /* SDMMC0_DAT2 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0); /* SDMMC0_DAT3 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 6, 0); /* SDMMC0_DAT4 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 7, 0); /* SDMMC0_DAT5 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 8, 0); /* SDMMC0_DAT6 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 9, 0); /* SDMMC0_DAT7 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 10, 0); /* SDMMC0_RSTN */ + atmel_pio4_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SDMMC0_VDDSEL */ + + at91_periph_clk_enable(ATMEL_ID_SDMMC0); + at91_enable_periph_generated_clk(ATMEL_ID_SDMMC0, + GCK_CSS_PLLA_CLK, 1); +} + +static void board_sdhci1_hw_init(void) +{ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 18, 0); /* SDMMC1_DAT0 */ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 19, 0); /* SDMMC1_DAT1 */ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 20, 0); /* SDMMC1_DAT2 */ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 21, 0); /* SDMMC1_DAT3 */ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 22, 0); /* SDMMC1_CK */ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 27, 0); /* SDMMC1_RSTN */ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 28, 0); /* SDMMC1_CMD */ + atmel_pio4_set_e_periph(AT91_PIO_PORTA, 30, 0); /* SDMMC1_CD */ + + at91_periph_clk_enable(ATMEL_ID_SDMMC1); + at91_enable_periph_generated_clk(ATMEL_ID_SDMMC1, + GCK_CSS_PLLA_CLK, 1); +} + +int board_mmc_init(bd_t *bis) +{ +#ifdef CONFIG_ATMEL_SDHCI0 + atmel_sdhci_init((void *)ATMEL_BASE_SDMMC0, ATMEL_ID_SDMMC0); +#endif +#ifdef CONFIG_ATMEL_SDHCI1 + atmel_sdhci_init((void *)ATMEL_BASE_SDMMC1, ATMEL_ID_SDMMC1); +#endif + + return 0; +} + +static void board_uart1_hw_init(void) +{ + atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, 1); /* URXD1 */ + atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0); /* UTXD1 */ + + at91_periph_clk_enable(ATMEL_ID_UART1); +} + +int board_early_init_f(void) +{ + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + at91_periph_clk_enable(ATMEL_ID_PIOD); + + board_uart1_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_ATMEL_SPI + board_spi0_hw_init(); +#endif +#ifdef CONFIG_ATMEL_SDHCI +#ifdef CONFIG_ATMEL_SDHCI0 + board_sdhci0_hw_init(); +#endif +#ifdef CONFIG_ATMEL_SDHCI1 + board_sdhci1_hw_init(); +#endif +#endif +#ifdef CONFIG_MACB + board_gmac_hw_init(); +#endif +#ifdef CONFIG_LCD + board_lcd_hw_init(); +#endif +#ifdef CONFIG_CMD_USB + board_usb_hw_init(); +#endif +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + at91_udp_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_MACB + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00); +#endif + +#ifdef CONFIG_USB_GADGET_ATMEL_USBA + usba_udc_probe(&pdata); +#ifdef CONFIG_USB_ETH_RNDIS + usb_eth_initialize(bis); +#endif +#endif + + return rc; +} diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig new file mode 100644 index 00000000000..c1dcbefcc31 --- /dev/null +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -0,0 +1,11 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_TARGET_SAMA5D2_XPLAINED=y +CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +# CONFIG_CMD_FPGA is not set +CONFIG_SPI_FLASH=y diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig new file mode 100644 index 00000000000..0271e8ef8d5 --- /dev/null +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -0,0 +1,11 @@ +CONFIG_ARM=y +CONFIG_ARCH_AT91=y +CONFIG_TARGET_SAMA5D2_XPLAINED=y +CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH" +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +# CONFIG_CMD_FPGA is not set +CONFIG_SPI_FLASH=y diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h new file mode 100644 index 00000000000..ae5ba3dd574 --- /dev/null +++ b/include/configs/sama5d2_xplained.h @@ -0,0 +1,122 @@ +/* + * Configuration file for the SAMA5D2 Xplained Board. + * + * Copyright (C) 2015 Atmel Corporation + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH + +#include "at91-sama5_common.h" + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_UART1 +#define CONFIG_USART_ID ATMEL_ID_UART1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#undef CONFIG_AT91_GPIO +#define CONFIG_ATMEL_PIO4 + +/* SerialFlash */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_ATMEL_SPI0 +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* NAND flash */ +#undef CONFIG_CMD_NAND + +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_SDHCI +#define CONFIG_ATMEL_SDHCI +#define CONFIG_ATMEL_SDHCI0 +#define CONFIG_ATMEL_SDHCI1 +#define CONFIG_SUPPORT_EMMC_BOOT +#endif + +/* USB */ +#define CONFIG_CMD_USB + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_STORAGE +#endif + +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D2 XPlained" + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* Ethernet Hardware */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY + +/* LCD */ +/* #define CONFIG_LCD */ + +#ifdef CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#endif + +#ifdef CONFIG_SYS_USE_MMC + +/* bootstrap + u-boot + env in sd card */ +#undef FAT_ENV_DEVICE_AND_PART +#undef CONFIG_BOOTCOMMAND + +#define FAT_ENV_DEVICE_AND_PART "1" +#define CONFIG_BOOTCOMMAND "fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; " \ + "fatload mmc 1:1 0x22000000 zImage; " \ + "bootz 0x22000000 - 0x21000000" +#undef CONFIG_BOOTARGS +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait" + +#endif + +#endif -- cgit v1.2.3 From 5cb9dfa031c01ed747a11b18bdf64ba598a3597f Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 5 Nov 2015 16:37:49 +0800 Subject: arm: at91/spl: matrix: move matrix init to separate file To make the matrix initialization code sharing with other SoCs, move it from SAMA5D4 particular file, mach-at91/armv7/sama5d4_devices.c to a separate file, mach-at91/matrix.c Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann --- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/armv7/sama5d4_devices.c | 42 ------------------------ arch/arm/mach-at91/matrix.c | 51 ++++++++++++++++++++++++++++++ 3 files changed, 52 insertions(+), 43 deletions(-) create mode 100644 arch/arm/mach-at91/matrix.c (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 30f2b49b69d..49e14e82573 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o -obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o +obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o obj-y += spl.o endif diff --git a/arch/arm/mach-at91/armv7/sama5d4_devices.c b/arch/arm/mach-at91/armv7/sama5d4_devices.c index 76301d63021..52f486289d9 100644 --- a/arch/arm/mach-at91/armv7/sama5d4_devices.c +++ b/arch/arm/mach-at91/armv7/sama5d4_devices.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include @@ -48,47 +47,6 @@ void at91_udp_hw_init(void) #endif #ifdef CONFIG_SPL_BUILD -void matrix_init(void) -{ - struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0; - struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1; - int i; - - /* Disable the write protect */ - writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); - writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); - - /* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */ - for (i = 4; i <= 10; i++) { - writel(0x000f0f0f, &h64mx->ssr[i]); - writel(0x0000ffff, &h64mx->sassr[i]); - writel(0x0000000f, &h64mx->srtsr[i]); - } - - /* CS3 */ - writel(0x00c0c0c0, &h32mx->ssr[3]); - writel(0xff000000, &h32mx->sassr[3]); - writel(0xff000000, &h32mx->srtsr[3]); - - /* NFC SRAM */ - writel(0x00010101, &h32mx->ssr[4]); - writel(0x00000001, &h32mx->sassr[4]); - writel(0x00000001, &h32mx->srtsr[4]); - - /* Configure Programmable Security peripherals on matrix 64 */ - writel(readl(&h64mx->spselr[0]) | 0x00080000, &h64mx->spselr[0]); - writel(readl(&h64mx->spselr[1]) | 0x00180000, &h64mx->spselr[1]); - writel(readl(&h64mx->spselr[2]) | 0x00000008, &h64mx->spselr[2]); - - /* Configure Programmable Security peripherals on matrix 32 */ - writel(readl(&h32mx->spselr[0]) | 0xFFC00000, &h32mx->spselr[0]); - writel(readl(&h32mx->spselr[1]) | 0x60E3FFFF, &h32mx->spselr[1]); - - /* Enable the write protect */ - writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); - writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); -} - void redirect_int_from_saic_to_aic(void) { struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; diff --git a/arch/arm/mach-at91/matrix.c b/arch/arm/mach-at91/matrix.c new file mode 100644 index 00000000000..cf363861c68 --- /dev/null +++ b/arch/arm/mach-at91/matrix.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2015 Atmel Corporation + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void matrix_init(void) +{ + struct atmel_matrix *h64mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX0; + struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1; + int i; + + /* Disable the write protect */ + writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); + writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); + + /* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */ + for (i = 4; i <= 10; i++) { + writel(0x000f0f0f, &h64mx->ssr[i]); + writel(0x0000ffff, &h64mx->sassr[i]); + writel(0x0000000f, &h64mx->srtsr[i]); + } + + /* CS3 */ + writel(0x00c0c0c0, &h32mx->ssr[3]); + writel(0xff000000, &h32mx->sassr[3]); + writel(0xff000000, &h32mx->srtsr[3]); + + /* NFC SRAM */ + writel(0x00010101, &h32mx->ssr[4]); + writel(0x00000001, &h32mx->sassr[4]); + writel(0x00000001, &h32mx->srtsr[4]); + + /* Configure Programmable Security peripherals on matrix 64 */ + writel(readl(&h64mx->spselr[0]) | 0x00080000, &h64mx->spselr[0]); + writel(readl(&h64mx->spselr[1]) | 0x00180000, &h64mx->spselr[1]); + writel(readl(&h64mx->spselr[2]) | 0x00000008, &h64mx->spselr[2]); + + /* Configure Programmable Security peripherals on matrix 32 */ + writel(readl(&h32mx->spselr[0]) | 0xFFC00000, &h32mx->spselr[0]); + writel(readl(&h32mx->spselr[1]) | 0x60E3FFFF, &h32mx->spselr[1]); + + /* Enable the write protect */ + writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); + writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); +} -- cgit v1.2.3 From 5906d2aa0cb461fc10c9d429d9b38a6b1265afe2 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 5 Nov 2015 16:37:50 +0800 Subject: arm: at91/spl: matrix: remove matrix write protection code On processor reset, the matrix write protection is disabled, so no need to disable/enable write protection when writing the matrix registers. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann --- arch/arm/mach-at91/matrix.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/matrix.c b/arch/arm/mach-at91/matrix.c index cf363861c68..452a6b995c0 100644 --- a/arch/arm/mach-at91/matrix.c +++ b/arch/arm/mach-at91/matrix.c @@ -15,10 +15,6 @@ void matrix_init(void) struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1; int i; - /* Disable the write protect */ - writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); - writel(ATMEL_MATRIX_WPMR_WPKEY & ~ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); - /* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */ for (i = 4; i <= 10; i++) { writel(0x000f0f0f, &h64mx->ssr[i]); @@ -44,8 +40,4 @@ void matrix_init(void) /* Configure Programmable Security peripherals on matrix 32 */ writel(readl(&h32mx->spselr[0]) | 0xFFC00000, &h32mx->spselr[0]); writel(readl(&h32mx->spselr[1]) | 0x60E3FFFF, &h32mx->spselr[1]); - - /* Enable the write protect */ - writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h64mx->wpmr); - writel(ATMEL_MATRIX_WPMR_WPKEY | ATMEL_MATRIX_WPMR_WPEN, &h32mx->wpmr); } -- cgit v1.2.3 From 6f0a51aa68419280cffb0d0f78ca4c3936256eb4 Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 5 Nov 2015 16:37:51 +0800 Subject: arm: at91/spl: matrix: remove security peripheral select code Remove the security peripheral select code, keep the default value in these registers, that is, the peripheral address space is configured as "Secured" access, it is suitable for SPL. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann --- arch/arm/mach-at91/matrix.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/matrix.c b/arch/arm/mach-at91/matrix.c index 452a6b995c0..e4780d62df6 100644 --- a/arch/arm/mach-at91/matrix.c +++ b/arch/arm/mach-at91/matrix.c @@ -31,13 +31,4 @@ void matrix_init(void) writel(0x00010101, &h32mx->ssr[4]); writel(0x00000001, &h32mx->sassr[4]); writel(0x00000001, &h32mx->srtsr[4]); - - /* Configure Programmable Security peripherals on matrix 64 */ - writel(readl(&h64mx->spselr[0]) | 0x00080000, &h64mx->spselr[0]); - writel(readl(&h64mx->spselr[1]) | 0x00180000, &h64mx->spselr[1]); - writel(readl(&h64mx->spselr[2]) | 0x00000008, &h64mx->spselr[2]); - - /* Configure Programmable Security peripherals on matrix 32 */ - writel(readl(&h32mx->spselr[0]) | 0xFFC00000, &h32mx->spselr[0]); - writel(readl(&h32mx->spselr[1]) | 0x60E3FFFF, &h32mx->spselr[1]); } -- cgit v1.2.3 From b5665bf2467ae7a83db7153bdc6faf520795fd0c Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 5 Nov 2015 16:37:52 +0800 Subject: arm: at91/spl: matrix: use matrix slave id macros To make matrix initialization code sharing with others, use the matrix slave id macros, instead of hard-coding. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann --- arch/arm/mach-at91/include/mach/sama5d4.h | 25 +++++++++++++++++++++++++ arch/arm/mach-at91/matrix.c | 18 +++++++++--------- 2 files changed, 34 insertions(+), 9 deletions(-) (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h index 3da8aff27ee..449cf0ede3b 100644 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -179,6 +179,31 @@ #define CPU_HAS_PCR #define CPU_HAS_H32MXDIV +/* MATRIX0(H64MX) slave id definitions */ +#define H64MX_SLAVE_AXIMX_BRIDGE 0 /* Bridge from H64MX to AXIMX */ +#define H64MX_SLAVE_PERIPH_BRIDGE 1 /* H64MX Peripheral Bridge */ +#define H64MX_SLAVE_VDEC 2 /* Video Decoder */ +#define H64MX_SLAVE_DDRC_PORT0 3 /* DDR2 Port0-AESOTF */ +#define H64MX_SLAVE_DDRC_PORT1 4 /* DDR2 Port1 */ +#define H64MX_SLAVE_DDRC_PORT2 5 /* DDR2 Port2 */ +#define H64MX_SLAVE_DDRC_PORT3 6 /* DDR2 Port3 */ +#define H64MX_SLAVE_DDRC_PORT4 7 /* DDR2 Port4 */ +#define H64MX_SLAVE_DDRC_PORT5 8 /* DDR2 Port5 */ +#define H64MX_SLAVE_DDRC_PORT6 9 /* DDR2 Port6 */ +#define H64MX_SLAVE_DDRC_PORT7 10 /* DDR2 Port7 */ +#define H64MX_SLAVE_SRAM 11 /* Internal SRAM 128K */ +#define H64MX_SLAVE_H32MX_BRIDGE 12 /* Bridge from H64MX to H32MX */ + +/* MATRIX1(H32MX) slave id definitions */ +#define H32MX_SLAVE_H64MX_BRIDGE 0 /* Bridge from H32MX to H64MX */ +#define H32MX_SLAVE_PERIPH_BRIDGE0 1 /* H32MX Peripheral Bridge 0 */ +#define H32MX_SLAVE_PERIPH_BRIDGE1 2 /* H32MX Peripheral Bridge 1 */ +#define H32MX_SLAVE_EBI 3 /* External Bus Interface */ +#define H32MX_SLAVE_NFC_CMD 3 /* NFC command Register */ +#define H32MX_SLAVE_NFC_SRAM 4 /* NFC SRAM */ +#define H32MX_SLAVE_USB 5 /* USB Device & Host */ +#define H32MX_SLAVE_SMD 6 /* Soft Modem (SMD) */ + /* sama5d4 series chip id definitions */ #define ARCH_ID_SAMA5D4 0x8a5c07c0 #define ARCH_EXID_SAMA5D41 0x00000001 diff --git a/arch/arm/mach-at91/matrix.c b/arch/arm/mach-at91/matrix.c index e4780d62df6..57d72700d33 100644 --- a/arch/arm/mach-at91/matrix.c +++ b/arch/arm/mach-at91/matrix.c @@ -15,20 +15,20 @@ void matrix_init(void) struct atmel_matrix *h32mx = (struct atmel_matrix *)ATMEL_BASE_MATRIX1; int i; - /* DDR port 1 ~ poart 7, slave number is: 4 ~ 10 */ - for (i = 4; i <= 10; i++) { + /* DDR port 1 ~ port 7 */ + for (i = H64MX_SLAVE_DDRC_PORT1; i <= H64MX_SLAVE_DDRC_PORT7; i++) { writel(0x000f0f0f, &h64mx->ssr[i]); writel(0x0000ffff, &h64mx->sassr[i]); writel(0x0000000f, &h64mx->srtsr[i]); } - /* CS3 */ - writel(0x00c0c0c0, &h32mx->ssr[3]); - writel(0xff000000, &h32mx->sassr[3]); - writel(0xff000000, &h32mx->srtsr[3]); + /* EBI CS3 (NANDFlash 128M) and NFC Command Registers(128M) */ + writel(0x00c0c0c0, &h32mx->ssr[H32MX_SLAVE_EBI]); + writel(0xff000000, &h32mx->sassr[H32MX_SLAVE_EBI]); + writel(0xff000000, &h32mx->srtsr[H32MX_SLAVE_EBI]); /* NFC SRAM */ - writel(0x00010101, &h32mx->ssr[4]); - writel(0x00000001, &h32mx->sassr[4]); - writel(0x00000001, &h32mx->srtsr[4]); + writel(0x00010101, &h32mx->ssr[H32MX_SLAVE_NFC_SRAM]); + writel(0x00000001, &h32mx->sassr[H32MX_SLAVE_NFC_SRAM]); + writel(0x00000001, &h32mx->srtsr[H32MX_SLAVE_NFC_SRAM]); } -- cgit v1.2.3 From e4677f1ae221ac615f32c993aaf3d2497ad5009d Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Thu, 5 Nov 2015 16:37:53 +0800 Subject: arm: at91/spl: atmel_sfr: move saic redirect to separate file To make saic redirect code sharing with other SoCs, move the saic redirect code from SAMA5D4 particular file, mach-at91/armv7/sama5d4_devices.c to a separate file, mach-at91/atmel_sfr.c Move ATMEL_SFR_AICREDIR_KEY definition to sama5d4.h, because each SoC has its own value. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann --- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/armv7/sama5d4_devices.c | 13 ------------- arch/arm/mach-at91/atmel_sfr.c | 21 +++++++++++++++++++++ arch/arm/mach-at91/include/mach/sama5_sfr.h | 1 - arch/arm/mach-at91/include/mach/sama5d4.h | 3 +++ 5 files changed, 25 insertions(+), 15 deletions(-) create mode 100644 arch/arm/mach-at91/atmel_sfr.c (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 49e14e82573..5b89617623e 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o -obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o +obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o matrix.o atmel_sfr.o obj-y += spl.o endif diff --git a/arch/arm/mach-at91/armv7/sama5d4_devices.c b/arch/arm/mach-at91/armv7/sama5d4_devices.c index 52f486289d9..ce33cd49888 100644 --- a/arch/arm/mach-at91/armv7/sama5d4_devices.c +++ b/arch/arm/mach-at91/armv7/sama5d4_devices.c @@ -45,16 +45,3 @@ void at91_udp_hw_init(void) at91_periph_clk_enable(ATMEL_ID_UDPHS); } #endif - -#ifdef CONFIG_SPL_BUILD -void redirect_int_from_saic_to_aic(void) -{ - struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; - u32 key32; - - if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) { - key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY; - writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir); - } -} -#endif diff --git a/arch/arm/mach-at91/atmel_sfr.c b/arch/arm/mach-at91/atmel_sfr.c new file mode 100644 index 00000000000..2bccb840c11 --- /dev/null +++ b/arch/arm/mach-at91/atmel_sfr.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2015 Atmel Corporation + * Wenyou Yang + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +void redirect_int_from_saic_to_aic(void) +{ + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; + u32 key32; + + if (!(readl(&sfr->aicredir) & ATMEL_SFR_AICREDIR_NSAIC)) { + key32 = readl(&sfr->sn1) ^ ATMEL_SFR_AICREDIR_KEY; + writel((key32 | ATMEL_SFR_AICREDIR_NSAIC), &sfr->aicredir); + } +} diff --git a/arch/arm/mach-at91/include/mach/sama5_sfr.h b/arch/arm/mach-at91/include/mach/sama5_sfr.h index 3081d375718..7b19a20a4e0 100644 --- a/arch/arm/mach-at91/include/mach/sama5_sfr.h +++ b/arch/arm/mach-at91/include/mach/sama5_sfr.h @@ -32,7 +32,6 @@ struct atmel_sfr { #define ATMEL_SFR_DDRCFG_FDQSIEN 0x00020000 /* Bit field in AICREDIR */ -#define ATMEL_SFR_AICREDIR_KEY 0x5F67B102 #define ATMEL_SFR_AICREDIR_NSAIC 0x00000001 #endif diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h index 449cf0ede3b..90085da1c6e 100644 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -204,6 +204,9 @@ #define H32MX_SLAVE_USB 5 /* USB Device & Host */ #define H32MX_SLAVE_SMD 6 /* Soft Modem (SMD) */ +/* AICREDIR Unlock Key */ +#define ATMEL_SFR_AICREDIR_KEY 0x5F67B102 + /* sama5d4 series chip id definitions */ #define ARCH_ID_SAMA5D4 0x8a5c07c0 #define ARCH_EXID_SAMA5D41 0x00000001 -- cgit v1.2.3