From 86ac7a9a5d0c8ae9f0e5e6ef2cc189198e498cf4 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 20 Nov 2018 10:20:00 +0000 Subject: imx: add i.MX8MQ EVK support Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan Cc: Fabio Estevam Cc: Stefano Babic --- arch/arm/mach-imx/imx8m/Kconfig | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/mach-imx') diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 98d79c31799..317dee9bc19 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -7,4 +7,17 @@ config IMX8M config SYS_SOC default "imx8m" +choice + prompt "NXP i.MX8M board select" + optional + +config TARGET_IMX8MQ_EVK + bool "imx8mq_evk" + select IMX8M + select IMX8M_LPDDR4 + +endchoice + +source "board/freescale/imx8mq_evk/Kconfig" + endif -- cgit v1.2.3