From 88f0dc32a7c9510999325f206a0f479a226337d7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 5 Mar 2020 11:01:50 +0100 Subject: ARM: zynq: Do not print message about boot device This information is shown already that's why there is no reason to print it again via custom prints. U-Boot SPL 2020.01-03080-ga6214d033bd0 (Mar 05 2020 - 09:59:05 +0100) mmc boot Trying to boot from MMC1 or U-Boot SPL 2020.01-03080-ga6214d033bd0 (Mar 05 2020 - 10:49:46 +0100) qspi boot Trying to boot from SPI Signed-off-by: Michal Simek --- arch/arm/mach-zynq/spl.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm/mach-zynq') diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c index e89e46c1038..02a7dc98547 100644 --- a/arch/arm/mach-zynq/spl.c +++ b/arch/arm/mach-zynq/spl.c @@ -45,7 +45,6 @@ u32 spl_boot_device(void) switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) { #ifdef CONFIG_SPL_SPI_SUPPORT case ZYNQ_BM_QSPI: - puts("qspi boot\n"); mode = BOOT_DEVICE_SPI; break; #endif @@ -57,7 +56,6 @@ u32 spl_boot_device(void) break; #ifdef CONFIG_SPL_MMC_SUPPORT case ZYNQ_BM_SD: - puts("mmc boot\n"); mode = BOOT_DEVICE_MMC1; break; #endif -- cgit v1.2.3