From 196311dc728bbb9484356547b9daa731ca2feb8d Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 21 May 2014 12:57:22 -0400 Subject: arm:am33xx: Rework s_init and add board_early_init_f With the changes to the i2c framework (and adopting the omap24xx_i2c driver to them) we can no longer call i2c functions prior to gd having been set and cleared. When SPL booting, this is handled by setting gd to point to SRAM in s_init. However in the cases where we are loaded directly by ROM (memory mapped NOR or QSPI) we need to make use of the normal hooks to slightly delay these calls. Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/am33xx/board.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 9a69b6ccfac..7fe049e5131 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -143,6 +143,19 @@ int arch_misc_init(void) } #ifndef CONFIG_SKIP_LOWLEVEL_INIT +/* + * In the case of non-SPL based booting we'll want to call these + * functions a tiny bit later as it will require gd to be set and cleared + * and that's not true in s_init in this case so we cannot do it there. + */ +int board_early_init_f(void) +{ + prcm_init(); + set_mux_conf_regs(); + + return 0; +} + /* * This function is the place to do per-board things such as ramp up the * MPU clock frequency. @@ -232,13 +245,12 @@ void s_init(void) gd = &gdata; preloader_console_init(); #endif - prcm_init(); - set_mux_conf_regs(); #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) /* Enable RTC32K clock */ rtc32k_enable(); #endif #ifdef CONFIG_SPL_BUILD + board_early_init_f(); sdram_init(); #endif } -- cgit v1.2.3