From 3e51266a4e530026c002e210754c737a0caaa050 Mon Sep 17 00:00:00 2001
From: Simon Glass
Date: Wed, 8 May 2013 08:06:04 +0000
Subject: powerpc: Use image_setup_linux() instead of local code

Rather than having similar code in powerpc, use image_setup_linux() which
should be common across all architectures that use the FDT.

Signed-off-by: Simon Glass <sjg@chromium.org>
---
 arch/powerpc/lib/bootm.c | 84 +-----------------------------------------------
 1 file changed, 1 insertion(+), 83 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 0119a7b6ebf..340b545e68e 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -220,101 +220,19 @@ static int boot_bd_t_linux(bootm_headers_t *images)
 	return ret;
 }
 
-/*
- * Verify the device tree.
- *
- * This function is called after all device tree fix-ups have been enacted,
- * so that the final device tree can be verified.  The definition of "verified"
- * is up to the specific implementation.  However, it generally means that the
- * addresses of some of the devices in the device tree are compared with the
- * actual addresses at which U-Boot has placed them.
- *
- * Returns 1 on success, 0 on failure.  If 0 is returned, U-boot will halt the
- * boot process.
- */
-static int __ft_verify_fdt(void *fdt)
-{
-	return 1;
-}
-__attribute__((weak, alias("__ft_verify_fdt"))) int ft_verify_fdt(void *fdt);
-
 static int boot_body_linux(bootm_headers_t *images)
 {
-	ulong rd_len;
-	struct lmb *lmb = &images->lmb;
-	ulong *initrd_start = &images->initrd_start;
-	ulong *initrd_end = &images->initrd_end;
-#if defined(CONFIG_OF_LIBFDT)
-	ulong of_size = images->ft_len;
-	char **of_flat_tree = &images->ft_addr;
-#endif
-
 	int ret;
 
-#if defined(CONFIG_OF_LIBFDT)
-	boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
-#endif
-
-	/* allocate space and init command line */
-	ret = boot_cmdline_linux(images);
-	if (ret)
-		return ret;
-
 	/* allocate space for kernel copy of board info */
 	ret = boot_bd_t_linux(images);
 	if (ret)
 		return ret;
 
-	rd_len = images->rd_end - images->rd_start;
-	ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, initrd_start, initrd_end);
-	if (ret)
-		return ret;
-
-#if defined(CONFIG_OF_LIBFDT)
-	ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
+	ret = image_setup_linux(images);
 	if (ret)
 		return ret;
 
-	/*
-	 * Add the chosen node if it doesn't exist, add the env and bd_t
-	 * if the user wants it (the logic is in the subroutines).
-	 */
-	if (of_size) {
-		if (fdt_chosen(*of_flat_tree, 1) < 0) {
-			puts ("ERROR: ");
-			puts ("/chosen node create failed");
-			puts (" - must RESET the board to recover.\n");
-			return -1;
-		}
-#ifdef CONFIG_OF_BOARD_SETUP
-		/* Call the board-specific fixup routine */
-		ft_board_setup(*of_flat_tree, gd->bd);
-#endif
-
-		/* Delete the old LMB reservation */
-		lmb_free(lmb, (phys_addr_t)(u32)*of_flat_tree,
-				(phys_size_t)fdt_totalsize(*of_flat_tree));
-
-		ret = fdt_resize(*of_flat_tree);
-		if (ret < 0)
-			return ret;
-		of_size = ret;
-
-		if (*initrd_start && *initrd_end) {
-			of_size += FDT_RAMDISK_OVERHEAD;
-			fdt_set_totalsize(*of_flat_tree, of_size);
-		}
-		/* Create a new LMB reservation */
-		lmb_reserve(lmb, (ulong)*of_flat_tree, of_size);
-
-		/* fixup the initrd now that we know where it should be */
-		if (*initrd_start && *initrd_end)
-			fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
-
-		if (!ft_verify_fdt(*of_flat_tree))
-			return -1;
-	}
-#endif	/* CONFIG_OF_LIBFDT */
 	return 0;
 }
 
-- 
cgit v1.2.3


From 0cb3325cd3a2f574c0ab73ab83b892c27cacab74 Mon Sep 17 00:00:00 2001
From: Sandeep Singh
Date: Mon, 25 Mar 2013 07:33:09 +0000
Subject: powerpc/B4860: Corrected FMAN1 operating frequency print at u-boot

The bit positions for FMAN1 freq in RCW is different for B4860.
Also addded a case when FMAN1 frewuency is equal to systembus.

Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/speed.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 297f2ed4739..9fc7b54aa8a 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -132,10 +132,15 @@ void get_sys_info (sys_info_t * sysInfo)
 		sysInfo->freqProcessor[cpu] =
 			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
 	}
+#ifdef CONFIG_PPC_B4860
+#define FM1_CLK_SEL	0xe0000000
+#define FM1_CLK_SHIFT	29
+#else
 #define PME_CLK_SEL	0xe0000000
 #define PME_CLK_SHIFT	29
 #define FM1_CLK_SEL	0x1c000000
 #define FM1_CLK_SHIFT	26
+#endif
 	rcw_tmp = in_be32(&gur->rcwsr[7]);
 
 #ifdef CONFIG_SYS_DPAA_PME
@@ -185,6 +190,9 @@ void get_sys_info (sys_info_t * sysInfo)
 	case 4:
 		sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
 		break;
+	case 5:
+		sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+		break;
 	case 6:
 		sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
 		break;
-- 
cgit v1.2.3


From cd7ad629960bf53eb2d7247ce1d499770b316116 Mon Sep 17 00:00:00 2001
From: Andy Fleming
Date: Mon, 25 Mar 2013 07:33:10 +0000
Subject: powerpc/mpc85xx: Add definitions for HDBCR registers

Makes it a bit easier to see if we've properly set them. While
we're in there, modify the accesses to HDBCR0 and HDBCR1  to actually
use those definitions.

Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/release.S   |  8 ++++----
 arch/powerpc/cpu/mpc85xx/start.S     |  8 ++++----
 arch/powerpc/include/asm/processor.h | 10 ++++++++++
 3 files changed, 18 insertions(+), 8 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 5c4b1e3b754..0dea871782f 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -69,9 +69,9 @@ __secondary_start_page:
 #endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999
-	mfspr	r3,977
+	mfspr	r3,SPRN_HDBCR1
 	oris	r3,r3,0x0100
-	mtspr	977,r3
+	mtspr	SPRN_HDBCR1,r3
 #endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
@@ -93,10 +93,10 @@ __secondary_start_page:
 1:	/* Erratum says set bits 55:60 to 001001 */
 	msync
 	isync
-	mfspr	r3,976
+	mfspr	r3,SPRN_HDBCR0
 	li	r4,0x48
 	rlwimi	r3,r4,0,0x1f8
-	mtspr	976,r3
+	mtspr	SPRN_HDBCR0,r3
 	isync
 2:
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 3f76ee66cfb..2ce5505e00e 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -116,10 +116,10 @@ _start_e500:
 	/* Erratum says set bits 55:60 to 001001 */
 	msync
 	isync
-	mfspr	r3,976
+	mfspr	r3,SPRN_HDBCR0
 	li	r4,0x48
 	rlwimi	r3,r4,0,0x1f8
-	mtspr	976,r3
+	mtspr	SPRN_HDBCR0,r3
 	isync
 2:
 #endif
@@ -372,9 +372,9 @@ l2_disabled:
 #endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999
-	mfspr	r3,977
+	mfspr	r3,SPRN_HDBCR1
 	oris	r3,r3,0x0100
-	mtspr	977,r3
+	mtspr	SPRN_HDBCR1,r3
 #endif
 
 	/* Enable Branch Prediction */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 8c91f0849b8..1ecf266b467 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -575,6 +575,16 @@
 #define SPRN_MSSSR0	0x3f7
 #endif
 
+#define SPRN_HDBCR0	0x3d0
+#define SPRN_HDBCR1	0x3d1
+#define SPRN_HDBCR2	0x3d2
+#define SPRN_HDBCR3	0x3d3
+#define SPRN_HDBCR4	0x3d4
+#define SPRN_HDBCR5	0x3d5
+#define SPRN_HDBCR6	0x3d6
+#define SPRN_HDBCR7	0x277
+#define SPRN_HDBCR8	0x278
+
 /* Short-hand versions for a number of the above SPRNs */
 
 #define CTR	SPRN_CTR	/* Counter Register */
-- 
cgit v1.2.3


From 45c18853d8bfb6c4e12d6e19c5391e5978a2f524 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:33:12 +0000
Subject: powerpc/mpc85xx: Update corenet global utility block registers

Fix ccsr_gur for corenet platform. Remove non-exist registers. Add fuse
status register.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/immap_85xx.h | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index baaa9fee534..3711f518a40 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1676,18 +1676,17 @@ typedef struct cpc_corenet {
 /* Global Utilities Block */
 #ifdef CONFIG_FSL_CORENET
 typedef struct ccsr_gur {
-	u32	porsr1;		/* POR status */
-	u8	res1[28];
+	u32	porsr1;		/* POR status 1 */
+	u32	porsr2;		/* POR status 2 */
+	u8	res_008[0x20-0x8];
 	u32	gpporcr1;	/* General-purpose POR configuration */
-	u8	res2[12];
-	u32	gpiocr;		/* GPIO control */
-	u8	res3[12];
-	u32	gpoutdr;	/* General-purpose output data */
-	u8	res4[12];
-	u32	gpindr;		/* General-purpose input data */
-	u8	res5[12];
-	u32	alt_pmuxcr;	/* Alt function signal multiplex control */
-	u8	res6[12];
+	u32	gpporcr2;	/* General-purpose POR configuration 2 */
+	u32	dcfg_fusesr;	/* Fuse status register */
+#define FSL_CORENET_DCFG_FUSESR_VID_SHIFT	25
+#define FSL_CORENET_DCFG_FUSESR_VID_MASK	0x1F
+#define FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT	20
+#define FSL_CORENET_DCFG_FUSESR_ALTVID_MASK	0x1F
+	u8	res_02c[0x70-0x2c];
 	u32	devdisr;	/* Device disable control */
 	u32	devdisr2;	/* Device disable control 2 */
 	u32	devdisr3;	/* Device disable control 3 */
-- 
cgit v1.2.3


From 3e4c3137d6aefaf45a87bbad701fc336f3f24a3d Mon Sep 17 00:00:00 2001
From: Andy Fleming
Date: Mon, 25 Mar 2013 07:33:14 +0000
Subject: e6500: Move L1 enablement after L2 enablement

The L1 D-cache on e6500 is write-through. This means that it's not
considered a good idea to have the L1 up and running if the L2 is
disabled. We don't actually *use* the L1 until after the L2 is
brought up on e6500, so go ahead and move the L1 enablement after
that code is done.

Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/start.S | 94 ++++++++++++++++++++--------------------
 1 file changed, 47 insertions(+), 47 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 2ce5505e00e..5542d0afb24 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -173,52 +173,6 @@ l2_disabled:
 	mfspr	r1,DBSR
 	mtspr	DBSR,r1		/* Clear all valid bits */
 
-	/*
-	 *	Enable L1 Caches early
-	 *
-	 */
-
-#ifdef CONFIG_SYS_CACHE_STASHING
-	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
-	li	r2,(32 + 0)
-	mtspr	L1CSR2,r2
-#endif
-
-	/* Enable/invalidate the I-Cache */
-	lis	r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
-	ori	r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
-	mtspr	SPRN_L1CSR1,r2
-1:
-	mfspr	r3,SPRN_L1CSR1
-	and.	r1,r3,r2
-	bne	1b
-
-	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
-	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
-	mtspr	SPRN_L1CSR1,r3
-	isync
-2:
-	mfspr	r3,SPRN_L1CSR1
-	andi.	r1,r3,L1CSR1_ICE@l
-	beq	2b
-
-	/* Enable/invalidate the D-Cache */
-	lis	r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
-	ori	r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
-	mtspr	SPRN_L1CSR0,r2
-1:
-	mfspr	r3,SPRN_L1CSR0
-	and.	r1,r3,r2
-	bne	1b
-
-	lis	r3,(L1CSR0_CPE|L1CSR0_DCE)@h
-	ori	r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
-	mtspr	SPRN_L1CSR0,r3
-	isync
-2:
-	mfspr	r3,SPRN_L1CSR0
-	andi.	r1,r3,L1CSR0_DCE@l
-	beq	2b
 
 	.macro	create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
 	lis	\scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
@@ -782,11 +736,57 @@ enable_l2_cluster_l2:
 	bne	1b
 	lis	r4, L2CSR0_L2E@h
 	sync
-	stw	r4, 0(r3)	/* eanble L2 */
+	stw	r4, 0(r3)	/* enable L2 */
 delete_ccsr_l2_tlb:
 	delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
 #endif
 
+	/*
+	 * Enable the L1. On e6500, this has to be done
+	 * after the L2 is up.
+	 */
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+	li	r2,(32 + 0)
+	mtspr	L1CSR2,r2
+#endif
+
+	/* Enable/invalidate the I-Cache */
+	lis	r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+	ori	r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+	mtspr	SPRN_L1CSR1,r2
+1:
+	mfspr	r3,SPRN_L1CSR1
+	and.	r1,r3,r2
+	bne	1b
+
+	lis	r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+	ori	r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+	mtspr	SPRN_L1CSR1,r3
+	isync
+2:
+	mfspr	r3,SPRN_L1CSR1
+	andi.	r1,r3,L1CSR1_ICE@l
+	beq	2b
+
+	/* Enable/invalidate the D-Cache */
+	lis	r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+	ori	r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+	mtspr	SPRN_L1CSR0,r2
+1:
+	mfspr	r3,SPRN_L1CSR0
+	and.	r1,r3,r2
+	bne	1b
+
+	lis	r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+	ori	r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+	mtspr	SPRN_L1CSR0,r3
+	isync
+2:
+	mfspr	r3,SPRN_L1CSR0
+	andi.	r1,r3,L1CSR0_DCE@l
+	beq	2b
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
 #define DCSR_LAWBARH0	(CONFIG_SYS_CCSRBAR + 0x1000)
 #define LAW_SIZE_1M	0x13
-- 
cgit v1.2.3


From f9772444a0fe326f7c986884df6c0b39d19fef06 Mon Sep 17 00:00:00 2001
From: Roy Zang
Date: Mon, 25 Mar 2013 07:33:18 +0000
Subject: T4/SerDes: correct the SATA index

Lane H on SerDes4 should be SATA2 instead of SATA1

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index 102defa5606..530f159d093 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -180,8 +180,8 @@ static struct serdes_config serdes4_cfg_tbl[] = {
 	{4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
 	{6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
 	{8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
-	{10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
-	{12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+	{10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2} },
+	{12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA2} },
 	{14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
 	{16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
 	{18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
-- 
cgit v1.2.3


From 0a7c5353a4cd96d862016356177525da475cb5b0 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:33:20 +0000
Subject: powerpc/mpc8xxx: Fix DDR 3-way interleaving

Should check if interleaving is enabled before using interleaving mode.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/ddr/main.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 5311a262a29..1a8d5933ae0 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -541,14 +541,17 @@ phys_size_t fsl_ddr_sdram(void)
 		total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
 
 	/* setup 3-way interleaving before enabling DDRC */
-	switch (info.memctl_opts[0].memctl_interleaving_mode) {
-	case FSL_DDR_3WAY_1KB_INTERLEAVING:
-	case FSL_DDR_3WAY_4KB_INTERLEAVING:
-	case FSL_DDR_3WAY_8KB_INTERLEAVING:
-		fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
-		break;
-	default:
-		break;
+	if (info.memctl_opts[0].memctl_interleaving) {
+		switch (info.memctl_opts[0].memctl_interleaving_mode) {
+		case FSL_DDR_3WAY_1KB_INTERLEAVING:
+		case FSL_DDR_3WAY_4KB_INTERLEAVING:
+		case FSL_DDR_3WAY_8KB_INTERLEAVING:
+			fsl_ddr_set_intl3r(
+				info.memctl_opts[0].memctl_interleaving_mode);
+			break;
+		default:
+			break;
+		}
 	}
 
 	/* Program configuration registers. */
-- 
cgit v1.2.3


From e1d5a2773f30a0b2b8ad3bfd88f118154c7af940 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:33:21 +0000
Subject: powerpc/mpc85xx: Fix portal setup

Missing nodes of crypto, pme, etc in device tree is not a fatal error.
Setting up the qman portal should skip the missing node and continue
to finish the rest.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/portals.c | 36 ++++++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 14 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index d529095ee8c..672edde455e 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -128,24 +128,32 @@ static int fdt_qportal(void *blob, int off, int id, char *name,
 
 	childoff = fdt_subnode_offset(blob, off, name);
 	if (create) {
-		if (childoff <= 0)
-			childoff = fdt_add_subnode(blob, off, name);
+		char handle[64], *p;
 
-		if (childoff > 0) {
-			char handle[64], *p;
+		strncpy(handle, name, sizeof(handle));
+		p = strchr(handle, '@');
+		if (!strncmp(name, "fman", 4)) {
+			*p = *(p + 1);
+			p++;
+		}
+		*p = '\0';
 
-			strncpy(handle, name, sizeof(handle));
-			p = strchr(handle, '@');
-			if (!strncmp(name, "fman", 4)) {
-				*p = *(p + 1);
-				p++;
-			}
-			*p = '\0';
+		dev_off = fdt_path_offset(blob, handle);
+		/* skip this node if alias is not found */
+		if (dev_off == -FDT_ERR_BADPATH)
+			return 0;
+		if (dev_off < 0)
+			return dev_off;
 
-			dev_off = fdt_path_offset(blob, handle);
-			if (dev_off < 0)
-				return dev_off;
+		if (childoff <= 0)
+			childoff = fdt_add_subnode(blob, off, name);
 
+		/* need to update the dev_off after adding a subnode */
+		dev_off = fdt_path_offset(blob, handle);
+		if (dev_off < 0)
+			return dev_off;
+
+		if (childoff > 0) {
 			dev_handle = fdt_get_phandle(blob, dev_off);
 			if (dev_handle <= 0) {
 				dev_handle = fdt_alloc_phandle(blob);
-- 
cgit v1.2.3


From 1e501f913667a5ce8ed139410ec71bc50c306a1c Mon Sep 17 00:00:00 2001
From: Roy Zang
Date: Mon, 25 Mar 2013 07:33:23 +0000
Subject: T4/USB: Add USB 2.0 UTMI dual phy support

T4240 internal UTMI phy is different comparing to previous UTMI PHY
in P3041.
This patch adds USB 2.0 UTMI Dual PHY new memory map and enable it for
T4240.
The phy timing is very sensitive and moving the phy enable code to
cpu_init.c will not work.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/config_mpc85xx.h |  3 +--
 arch/powerpc/include/asm/immap_85xx.h     | 41 +++++++++++++++++++++++++++++++
 drivers/usb/host/ehci-fsl.c               | 21 ++++++++++++++++
 3 files changed, 63 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 7267611cbcc..6c02033f713 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -537,8 +537,7 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_A004468
 #define CONFIG_SYS_FSL_ERRATUM_A_004934
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 3711f518a40..74cc94be325 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2828,12 +2828,53 @@ typedef struct ccsr_pme {
 	u8	res4[0x400];
 } ccsr_pme_t;
 
+#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+struct ccsr_usb_port_ctrl {
+	u32	ctrl;
+	u32	drvvbuscfg;
+	u32	pwrfltcfg;
+	u32	sts;
+	u8	res_14[0xc];
+	u32	bistcfg;
+	u32	biststs;
+	u32	abistcfg;
+	u32	abiststs;
+	u8	res_30[0x10];
+	u32	xcvrprg;
+	u32	anaprg;
+	u32	anadrv;
+	u32	anasts;
+};
+
+typedef struct ccsr_usb_phy {
+	u32	id;
+	struct  ccsr_usb_port_ctrl port1;
+	u8	res_50[0xc];
+	u32	tvr;
+	u32	pllprg[4];
+	u8	res_70[0x4];
+	u32	anaccfg;
+	u32	dbg;
+	u8	res_7c[0x4];
+	struct  ccsr_usb_port_ctrl port2;
+	u8	res_dc[0x334];
+} ccsr_usb_phy_t;
+
+#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0)
+#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21)
+#else
 typedef struct ccsr_usb_phy {
 	u8	res0[0x18];
 	u32	usb_enable_override;
 	u8	res[0xe4];
 } ccsr_usb_phy_t;
 #define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1
+#endif
 
 #ifdef CONFIG_SYS_FSL_RAID_ENGINE
 struct ccsr_raide {
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f54b4089662..77c41f3c3e4 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -89,6 +89,27 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 
 	if (!strcmp(phy_type, "utmi")) {
 #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
+#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
+		ccsr_usb_phy_t *usb_phy =
+			(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+		setbits_be32(&usb_phy->pllprg[1],
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN	|
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN	|
+			     CONFIG_SYS_FSL_USB_PLLPRG2_MFI		|
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+		setbits_be32(&usb_phy->port1.ctrl,
+			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+		setbits_be32(&usb_phy->port1.drvvbuscfg,
+			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+		setbits_be32(&usb_phy->port1.pwrfltcfg,
+			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+		setbits_be32(&usb_phy->port2.ctrl,
+			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+		setbits_be32(&usb_phy->port2.drvvbuscfg,
+			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+		setbits_be32(&usb_phy->port2.pwrfltcfg,
+			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+#endif
 		setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
 		setbits_be32(&ehci->control, UTMI_PHY_EN);
 		udelay(1000); /* delay required for PHY Clk to appear */
-- 
cgit v1.2.3


From eb80880eb2806eea4436e9ee7fd8a8b741ee0620 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:33:26 +0000
Subject: powerpc/corenet2: Print SerDes protocol in decimal

Use decimal and hexadecimal for protocol numbers. It helps to match with
SoC user manual.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index 01dcdf6bc1a..93eca766920 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -164,7 +164,7 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
 	}
 
 	cfg >>= sd_prctl_shift;
-	printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg);
+	printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
 	if (!is_serdes_prtcl_valid(sd, cfg))
 		printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
 
-- 
cgit v1.2.3


From 615f0cba584d11944b43af03cc6d9324fc7587e3 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:33:27 +0000
Subject: powerpc/mpc85xx: Fix PIR parsing for chassis2

The PIR parsing algorithm we used is not only for E6500. It applies to all
SoCs with chassis 2.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/release.S | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 0dea871782f..467ea1045df 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -159,9 +159,9 @@ __secondary_start_page:
 	 * we cannot access it yet before setting up a new TLB
 	 */
 	mfspr	r0,SPRN_PIR
-#if	defined(CONFIG_E6500)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 /*
- * PIR definition for E6500
+ * PIR definition for Chassis 2
  * 0-17 Reserved (logic 0s)
  * 8-19 CHIP_ID,    2'b00      - SoC 1
  *                  all others - reserved
@@ -187,7 +187,7 @@ __secondary_start_page:
 	slwi	r8,r4,6	/* spin table is padded to 64 byte */
 	add	r10,r3,r8
 
-#ifdef CONFIG_E6500
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 	mfspr	r0,SPRN_PIR
 	/*
 	 * core 0 thread 0: pir reset value 0x00, new pir 0
-- 
cgit v1.2.3


From 924859ac2313d116372eec9c879302977fb4eb38 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:33:28 +0000
Subject: powerpc/t4240: Fix SerDes protocol arrays with const prefix

Protocols are constants. Fix arrays with const prefix.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index 530f159d093..1316ed9e31f 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -31,7 +31,7 @@ struct serdes_config {
 	u8 lanes[SRDS_MAX_LANES];
 };
 
-static struct serdes_config serdes1_cfg_tbl[] = {
+static const struct serdes_config serdes1_cfg_tbl[] = {
 	/* SerDes 1 */
 	{1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
 		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
@@ -66,7 +66,7 @@ static struct serdes_config serdes1_cfg_tbl[] = {
 		NONE, NONE, QSGMII_FM1_A, NONE}},
 	{}
 };
-static struct serdes_config serdes2_cfg_tbl[] = {
+static const struct serdes_config serdes2_cfg_tbl[] = {
 	/* SerDes 2 */
 	{1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
 		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
@@ -150,7 +150,7 @@ static struct serdes_config serdes2_cfg_tbl[] = {
 		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
 	{}
 };
-static struct serdes_config serdes3_cfg_tbl[] = {
+static const struct serdes_config serdes3_cfg_tbl[] = {
 	/* SerDes 3 */
 	{2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}},
 	{4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
@@ -174,7 +174,7 @@ static struct serdes_config serdes3_cfg_tbl[] = {
 		SRIO1, SRIO1, SRIO1, SRIO1}},
 	{}
 };
-static struct serdes_config serdes4_cfg_tbl[] = {
+static const struct serdes_config serdes4_cfg_tbl[] = {
 	/* SerDes 4 */
 	{2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}},
 	{4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
@@ -187,7 +187,7 @@ static struct serdes_config serdes4_cfg_tbl[] = {
 	{18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
 	{}
 };
-static struct serdes_config *serdes_cfg_tbl[] = {
+static const struct serdes_config *serdes_cfg_tbl[] = {
 	serdes1_cfg_tbl,
 	serdes2_cfg_tbl,
 	serdes3_cfg_tbl,
@@ -196,7 +196,7 @@ static struct serdes_config *serdes_cfg_tbl[] = {
 
 enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
 {
-	struct serdes_config *ptr;
+	const struct serdes_config *ptr;
 
 	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
 		return 0;
@@ -213,7 +213,7 @@ enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
 int is_serdes_prtcl_valid(int serdes, u32 prtcl)
 {
 	int i;
-	struct serdes_config *ptr;
+	const struct serdes_config *ptr;
 
 	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
 		return 0;
-- 
cgit v1.2.3


From b62408464b749b57c4ec83594e09fa78dbd6bca4 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:33:29 +0000
Subject: powerpc/mpc85xx: Add T4160 SoC

T4160 SoC is low power version of T4240. The T4160 combines eight dual
threaded Power Architecture e6500 cores and two memory complexes (CoreNet
platform cache and DDR3 memory controller) with the same high-performance
datapath acceleration, networking, and peripheral bus interfaces.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/Makefile         |   3 +
 arch/powerpc/cpu/mpc85xx/t4240_serdes.c   | 132 ++++++++++++++++++++++++++++++
 arch/powerpc/cpu/mpc8xxx/cpu.c            |   1 +
 arch/powerpc/include/asm/config_mpc85xx.h |  33 ++++++++
 arch/powerpc/include/asm/immap_85xx.h     |   4 +-
 arch/powerpc/include/asm/processor.h      |   1 +
 drivers/net/fm/Makefile                   |   1 +
 7 files changed, 173 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 6776c85e499..6e5aec26e03 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -83,6 +83,7 @@ COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5040)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_T4240)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_T4160)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4420)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
@@ -102,6 +103,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
 COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_T4160) += t4240_ids.o
 COBJS-$(CONFIG_PPC_B4420) += b4860_ids.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
 
@@ -137,6 +139,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
 COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_T4160) += t4240_serdes.o
 COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
 COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index 1316ed9e31f..c001780ca96 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -31,6 +31,7 @@ struct serdes_config {
 	u8 lanes[SRDS_MAX_LANES];
 };
 
+#ifdef CONFIG_PPC_T4240
 static const struct serdes_config serdes1_cfg_tbl[] = {
 	/* SerDes 1 */
 	{1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
@@ -187,6 +188,137 @@ static const struct serdes_config serdes4_cfg_tbl[] = {
 	{18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
 	{}
 };
+#elif defined(CONFIG_PPC_T4160)
+static const struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10} },
+	{2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
+	{4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
+	{28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
+	{36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
+	{38, {NONE, NONE, QSGMII_FM1_B, NONE,
+		NONE, NONE, QSGMII_FM1_A, NONE} },
+	{}
+};
+static const struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		NONE, NONE} },
+	{28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{38, {NONE, NONE, QSGMII_FM2_B, NONE,
+		NONE, QSGMII_FM1_A, NONE, NONE} },
+	{40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		NONE, QSGMII_FM1_A, NONE, NONE} },
+	{46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		NONE, QSGMII_FM1_A, NONE, NONE} },
+	{48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		NONE, QSGMII_FM1_A, NONE, NONE} },
+	{50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		NONE, NONE, NONE, NONE} },
+	{52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		NONE, NONE, NONE, NONE} },
+	{54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		NONE, NONE, NONE, NONE} },
+	{56, {NONE, XFI_FM1_MAC10,
+		XFI_FM2_MAC10, NONE,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+	{57, {NONE, XFI_FM1_MAC10,
+		XFI_FM2_MAC10, NONE,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		NONE, NONE} },
+	{}
+};
+static const struct serdes_config serdes3_cfg_tbl[] = {
+	/* SerDes 3 */
+	{2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+	{4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
+	{6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
+	{8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} },
+	{9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
+	{10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
+	{12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		PCIE2, PCIE2, PCIE2, PCIE2} },
+	{14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		PCIE2, PCIE2, PCIE2, PCIE2} },
+	{16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		SRIO1, SRIO1, SRIO1, SRIO1} },
+	{17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		SRIO1, SRIO1, SRIO1, SRIO1} },
+	{19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		SRIO1, SRIO1, SRIO1, SRIO1} },
+	{20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+			NONE, NONE, NONE, NONE} },
+	{}
+};
+static const struct serdes_config serdes4_cfg_tbl[] = {
+	/* SerDes 4 */
+	{4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} },
+	{6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
+	{8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
+	{10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} },
+	{12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} },
+	{14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
+	{16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
+	{18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} },
+	{}
+}
+;
+#else
+#error "Need to define SerDes protocol"
+#endif
 static const struct serdes_config *serdes_cfg_tbl[] = {
 	serdes1_cfg_tbl,
 	serdes2_cfg_tbl,
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 39525fb29d5..0087cd029fe 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -77,6 +77,7 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(P5040, P5040, 4),
 	CPU_TYPE_ENTRY(T4240, T4240, 0),
 	CPU_TYPE_ENTRY(T4120, T4120, 0),
+	CPU_TYPE_ENTRY(T4160, T4160, 0),
 	CPU_TYPE_ENTRY(B4860, B4860, 0),
 	CPU_TYPE_ENTRY(G4860, G4860, 0),
 	CPU_TYPE_ENTRY(G4060, G4060, 0),
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 6c02033f713..75719414009 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -544,6 +544,39 @@
 #define CONFIG_SYS_FSL_ERRATUM_A005871
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 
+#elif defined(CONFIG_PPC_T4160)
+#define CONFIG_SYS_PPC64		/* 64-bit core */
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#define CONFIG_MAX_CPUS			8
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	5
+#define CONFIG_SYS_FSL_NUM_LAWS		32
+#define CONFIG_SYS_FSL_SRDS_3
+#define CONFIG_SYS_FSL_SRDS_4
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		2
+#define CONFIG_SYS_NUM_FM1_DTSEC	7
+#define CONFIG_SYS_NUM_FM1_10GEC	1
+#define CONFIG_SYS_NUM_FM2_DTSEC	7
+#define CONFIG_SYS_NUM_FM2_10GEC	1
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV	16
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v3.0"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_A004468
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_FSL_ERRATUM_A005871
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+#define CONFIG_SYS_FSL_PCI_VER_3_X
+
 #elif defined(CONFIG_PPC_B4420)
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 74cc94be325..28fe1d22cb8 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1830,7 +1830,7 @@ typedef struct ccsr_gur {
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT	16
 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK	0x3f
-#if defined(CONFIG_PPC_T4240)
+#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xfc000000
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	26
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL		0x00fe0000
@@ -1898,7 +1898,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII          0x00100000
 #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE         0x00180000
 #endif
-#if defined(CONFIG_PPC_T4240)
+#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
 #define FSL_CORENET_RCWSR13_EC1			0x60000000 /* bits 417..418 */
 #define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII	0x00000000
 #define FSL_CORENET_RCWSR13_EC1_FM2_GPIO		0x40000000
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 1ecf266b467..5c0c438e603 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1109,6 +1109,7 @@
 #define SVR_P5040	0x820400
 #define SVR_T4240	0x824000
 #define SVR_T4120	0x824001
+#define SVR_T4160	0x824100
 #define SVR_B4860	0X868000
 #define SVR_G4860	0x868001
 #define SVR_G4060	0x868003
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index f191c79a25c..9aaa8285357 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -46,6 +46,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080.o
 COBJS-$(CONFIG_PPC_P5020) += p5020.o
 COBJS-$(CONFIG_PPC_P5040) += p5040.o
 COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_T4160) += t4240.o
 COBJS-$(CONFIG_PPC_B4420) += b4860.o
 COBJS-$(CONFIG_PPC_B4860) += b4860.o
 endif
-- 
cgit v1.2.3


From 3e83fc9b4d898e3e97a6079d103c1e3dc53ca5cc Mon Sep 17 00:00:00 2001
From: Shaohui Xie
Date: Mon, 25 Mar 2013 07:33:25 +0000
Subject: powerpc/85xx: add missing QMAN frequency calculation

When CONFIG_SYS_FSL_QORIQ_CHASSIS2 is not defined, QMAN frequency will not
be initialized, and QMAN will have a wrong frequency display.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/speed.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 9fc7b54aa8a..f00b1abe63f 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -293,6 +293,10 @@ void get_sys_info (sys_info_t * sysInfo)
 #endif
 #endif
 
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+#endif
+
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 #else /* CONFIG_FSL_CORENET */
-- 
cgit v1.2.3


From 959278083db4a2f104e56069ca031ecc3213c728 Mon Sep 17 00:00:00 2001
From: Shengzhou Liu
Date: Mon, 25 Mar 2013 07:39:28 +0000
Subject: t4240qds/eth: fixup ethernet for t4240qds

1, Implemented board_ft_fman_fixup_port() to fix port for kernel.
2, Implemented fdt_fixup_board_enet() to fix node status of different
   slots and interfaces.
3, Adding detection of slot present for XGMII interface.
4, There is no PHY for XFI, so removed related phy address settings.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/fsl_serdes.h |   1 +
 board/freescale/t4qds/eth.c           | 104 +++++++++++++++++++++++++++++-----
 include/configs/t4qds.h               |   4 --
 3 files changed, 91 insertions(+), 18 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 6cd7379c8f5..c4624557e8a 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -91,6 +91,7 @@ enum srds {
 
 int is_serdes_configured(enum srds_prtcl device);
 void fsl_serdes_init(void);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
 
 #ifdef CONFIG_FSL_CORENET
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index a49c7d4f15f..8d2c33f05e6 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -52,7 +52,7 @@
 #define EMI1_SLOT4	4
 #define EMI1_SLOT5	5
 #define EMI1_SLOT7	7
-#define EMI2		8 /* tmp, FIXME */
+#define EMI2		8
 /* Slot6 and Slot8 do not have EMI connections */
 
 static int mdio_mux[NUM_FM_PORTS];
@@ -180,21 +180,86 @@ static int t4240qds_mdio_init(char *realbusname, u8 muxval)
 void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
 				enum fm_port port, int offset)
 {
-	if (mdio_mux[port] == EMI1_RGMII)
-		fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
-
-	/* TODO: will do with dts */
+	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+		switch (port) {
+		case FM1_DTSEC9:
+			fdt_set_phy_handle(blob, prop, pa, "phy_sgmii4");
+			break;
+		case FM1_DTSEC10:
+			fdt_set_phy_handle(blob, prop, pa, "phy_sgmii3");
+			break;
+		case FM2_DTSEC9:
+			fdt_set_phy_handle(blob, prop, pa, "phy_sgmii12");
+			break;
+		case FM2_DTSEC10:
+			fdt_set_phy_handle(blob, prop, pa, "phy_sgmii11");
+			break;
+		default:
+			break;
+		}
+	}
 }
 
 void fdt_fixup_board_enet(void *fdt)
 {
-	/* TODO: will do with dts */
+	int i;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+
+	prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			switch (mdio_mux[i]) {
+			case EMI1_SLOT1:
+				fdt_status_okay_by_alias(fdt, "emi1_slot1");
+				break;
+			case EMI1_SLOT2:
+				fdt_status_okay_by_alias(fdt, "emi1_slot2");
+				break;
+			case EMI1_SLOT3:
+				fdt_status_okay_by_alias(fdt, "emi1_slot3");
+				break;
+			case EMI1_SLOT4:
+				fdt_status_okay_by_alias(fdt, "emi1_slot4");
+				break;
+			default:
+				break;
+			}
+			break;
+		case PHY_INTERFACE_MODE_XGMII:
+			/* check if it's XFI interface for 10g */
+			if ((prtcl2 == 56) || (prtcl2 == 57)) {
+				fdt_status_okay_by_alias(fdt, "emi2_xfislot3");
+				break;
+			}
+			switch (i) {
+			case FM1_10GEC1:
+				fdt_status_okay_by_alias(fdt, "emi2_xauislot1");
+				break;
+			case FM1_10GEC2:
+				fdt_status_okay_by_alias(fdt, "emi2_xauislot2");
+				break;
+			case FM2_10GEC1:
+				fdt_status_okay_by_alias(fdt, "emi2_xauislot3");
+				break;
+			case FM2_10GEC2:
+				fdt_status_okay_by_alias(fdt, "emi2_xauislot4");
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
 }
 
 int board_eth_init(bd_t *bis)
 {
 #if defined(CONFIG_FMAN_ENET)
-	int i;
+	int i, idx, lane, slot;
 	struct memac_mdio_info dtsec_mdio_info;
 	struct memac_mdio_info tgec_mdio_info;
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -293,7 +358,7 @@ int board_eth_init(bd_t *bis)
 	}
 
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		int idx = i - FM1_DTSEC1, lane, slot;
+		idx = i - FM1_DTSEC1;
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_SGMII:
 			lane = serdes_get_first_lane(FSL_SRDS_1,
@@ -334,8 +399,16 @@ int board_eth_init(bd_t *bis)
 	}
 
 	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+		idx = i - FM1_10GEC1;
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_XGMII:
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+						XAUI_FM1_MAC9 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot_fsm1[lane];
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
 			mdio_mux[i] = EMI2;
 			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 			break;
@@ -344,7 +417,6 @@ int board_eth_init(bd_t *bis)
 		}
 	}
 
-
 #if (CONFIG_SYS_NUM_FMAN == 2)
 	switch (srds_prtcl_s2) {
 	case 1:
@@ -418,10 +490,6 @@ int board_eth_init(bd_t *bis)
 	case 56:
 	case 57:
 		/* XFI in Slot3, SGMII in Slot4 */
-		fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR);
-		fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR);
-		fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR);
 		fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
 		fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
 		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
@@ -433,7 +501,7 @@ int board_eth_init(bd_t *bis)
 	}
 
 	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
-		int idx = i - FM2_DTSEC1, lane, slot;
+		idx = i - FM2_DTSEC1;
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_SGMII:
 			lane = serdes_get_first_lane(FSL_SRDS_2,
@@ -477,8 +545,16 @@ int board_eth_init(bd_t *bis)
 	}
 
 	for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+		idx = i - FM2_10GEC1;
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_XGMII:
+			lane = serdes_get_first_lane(FSL_SRDS_2,
+						XAUI_FM2_MAC9 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot_fsm2[lane];
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
 			mdio_mux[i] = EMI2;
 			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
 			break;
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index a8346f08002..ef8c5b27324 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -649,10 +649,6 @@ unsigned long get_board_ddr_clk(void);
 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-#define XFI_CARD_PORT1_PHY_ADDR	0x1 /* tmp, FIXME below addr */
-#define XFI_CARD_PORT2_PHY_ADDR	0x2
-#define XFI_CARD_PORT3_PHY_ADDR	0x3
-#define XFI_CARD_PORT4_PHY_ADDR	0x4
 #define QSGMII_CARD_PHY_ADDR	0x5
 #define FM1_10GEC1_PHY_ADDR	0x0
 #define FM1_10GEC2_PHY_ADDR	0x1
-- 
cgit v1.2.3


From fbe27ce7ba2ad93418e322c37554837e5798e470 Mon Sep 17 00:00:00 2001
From: Shengzhou Liu
Date: Mon, 25 Mar 2013 07:39:30 +0000
Subject: powerpc/85xx: fix build error introduced by serdes_get_prtcl

Removed unused declare serdes_get_prtcl() which was no longer needed.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/fsl_serdes.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index c4624557e8a..6cd7379c8f5 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -91,7 +91,6 @@ enum srds {
 
 int is_serdes_configured(enum srds_prtcl device);
 void fsl_serdes_init(void);
-enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
 
 #ifdef CONFIG_FSL_CORENET
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
-- 
cgit v1.2.3


From 3fa75c875c960b0b978c63d6ae27fad8d8a0e692 Mon Sep 17 00:00:00 2001
From: Roy Zang
Date: Mon, 25 Mar 2013 07:39:33 +0000
Subject: T4/usb: move usb 2.0 utmi dual phy init code to cpu_init.c

This is what we have done for the UTMI PHY on P3041/P5020. Then the PHY
initialization can be reused in kernel without  “usb start” command.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c | 22 ++++++++++++++++++++++
 drivers/usb/host/ehci-fsl.c         | 21 ---------------------
 2 files changed, 22 insertions(+), 21 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 53713e31d42..48e6a05d38d 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -637,6 +637,28 @@ skip_l2:
 	}
 #endif
 
+#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
+		ccsr_usb_phy_t *usb_phy =
+			(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+		setbits_be32(&usb_phy->pllprg[1],
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
+			     CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
+			     CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+		setbits_be32(&usb_phy->port1.ctrl,
+			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+		setbits_be32(&usb_phy->port1.drvvbuscfg,
+			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+		setbits_be32(&usb_phy->port1.pwrfltcfg,
+			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+		setbits_be32(&usb_phy->port2.ctrl,
+			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+		setbits_be32(&usb_phy->port2.drvvbuscfg,
+			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+		setbits_be32(&usb_phy->port2.pwrfltcfg,
+			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+#endif
+
 #ifdef CONFIG_FMAN_ENET
 	fman_enet_init();
 #endif
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 77c41f3c3e4..f54b4089662 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -89,27 +89,6 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 
 	if (!strcmp(phy_type, "utmi")) {
 #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
-#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
-		ccsr_usb_phy_t *usb_phy =
-			(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
-		setbits_be32(&usb_phy->pllprg[1],
-			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN	|
-			     CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN	|
-			     CONFIG_SYS_FSL_USB_PLLPRG2_MFI		|
-			     CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
-		setbits_be32(&usb_phy->port1.ctrl,
-			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
-		setbits_be32(&usb_phy->port1.drvvbuscfg,
-			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
-		setbits_be32(&usb_phy->port1.pwrfltcfg,
-			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
-		setbits_be32(&usb_phy->port2.ctrl,
-			     CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
-		setbits_be32(&usb_phy->port2.drvvbuscfg,
-			     CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
-		setbits_be32(&usb_phy->port2.pwrfltcfg,
-			     CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
-#endif
 		setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI);
 		setbits_be32(&ehci->control, UTMI_PHY_EN);
 		udelay(1000); /* delay required for PHY Clk to appear */
-- 
cgit v1.2.3


From 8444b536c99592d61a8374641006431f749253df Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:39:34 +0000
Subject: powerpc/mpc85xx: Update workaround for DDR erratum A-004934

The workaround has been updated to use a slightly different magic number.
Change from 0x00003000 to 0x30003000.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index ef0dd1da64c..c5b47200e08 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -142,7 +142,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 		}
 	}
 #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
-	out_be32(&ddr->debug[28], 0x00003000);
+	out_be32(&ddr->debug[28], 0x30003000);
 #endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-- 
cgit v1.2.3


From ef00227551273eb1acca299bcb9528e1a2071328 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:39:35 +0000
Subject: powerpc/mpc8xxx: Allow board file to override DDR address assignment

This gives boards flexibility to assign other than default addresses to each
DDR controller. For example, DDR controler 2 can have 0 as the base and DDR
controller 1 has higher memory.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/ddr/main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 1a8d5933ae0..7a8636de166 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -186,7 +186,7 @@ const char * step_to_string(unsigned int step) {
 	return step_string_tbl[s];
 }
 
-unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
 			  unsigned int dbw_cap_adj[])
 {
 	int i, j;
@@ -354,6 +354,11 @@ unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
 	return total_mem;
 }
 
+/* Use weak function to allow board file to override the address assignment */
+__attribute__((weak, alias("__step_assign_addresses")))
+unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+			  unsigned int dbw_cap_adj[]);
+
 unsigned long long
 fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
 				       unsigned int size_only)
-- 
cgit v1.2.3


From d6ed3222229974682799bd2083f2ceeac6f912b1 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk
Date: Sat, 11 May 2013 03:00:50 +0000
Subject: Power: remove support for Freescale MPC8220

The Freescale MPC8220 Power Architecture processors have long reached
EOL; Freescale does not even list these any more on their web site.

Remove the code to avoid wasting maitaining efforts on dead stuff.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
---
 MAKEALL                                  |   7 -
 README                                   |   1 -
 api/api_platform-powerpc.c               |   2 -
 arch/powerpc/cpu/mpc8220/Makefile        |  50 --
 arch/powerpc/cpu/mpc8220/config.mk       |  27 -
 arch/powerpc/cpu/mpc8220/cpu.c           | 104 ----
 arch/powerpc/cpu/mpc8220/cpu_init.c      | 136 -----
 arch/powerpc/cpu/mpc8220/dma.h           |  68 ---
 arch/powerpc/cpu/mpc8220/dramSetup.c     | 752 ------------------------
 arch/powerpc/cpu/mpc8220/dramSetup.h     | 108 ----
 arch/powerpc/cpu/mpc8220/fec.c           | 961 -------------------------------
 arch/powerpc/cpu/mpc8220/fec.h           | 283 ---------
 arch/powerpc/cpu/mpc8220/fec_dma_tasks.S | 363 ------------
 arch/powerpc/cpu/mpc8220/i2c.c           | 388 -------------
 arch/powerpc/cpu/mpc8220/i2cCore.c       | 627 --------------------
 arch/powerpc/cpu/mpc8220/i2cCore.h       | 103 ----
 arch/powerpc/cpu/mpc8220/interrupts.c    |  80 ---
 arch/powerpc/cpu/mpc8220/io.S            | 128 ----
 arch/powerpc/cpu/mpc8220/loadtask.c      |  78 ---
 arch/powerpc/cpu/mpc8220/pci.c           | 191 ------
 arch/powerpc/cpu/mpc8220/speed.c         | 125 ----
 arch/powerpc/cpu/mpc8220/start.S         | 734 -----------------------
 arch/powerpc/cpu/mpc8220/traps.c         | 231 --------
 arch/powerpc/cpu/mpc8220/u-boot.lds      |  91 ---
 arch/powerpc/cpu/mpc8220/uart.c          | 142 -----
 arch/powerpc/include/asm/global_data.h   |   6 -
 arch/powerpc/include/asm/immap_8220.h    | 246 --------
 arch/powerpc/include/asm/u-boot.h        |   8 -
 arch/powerpc/lib/board.c                 |  24 -
 arch/powerpc/lib/bootm.c                 |   7 -
 board/alaska/Makefile                    |  44 --
 board/alaska/README                      | 482 ----------------
 board/alaska/alaska.c                    | 153 -----
 board/alaska/flash.c                     | 945 ------------------------------
 board/sorcery/Makefile                   |  44 --
 board/sorcery/sorcery.c                  |  68 ---
 boards.cfg                               |   3 -
 common/board_f.c                         |  24 -
 common/cmd_bdinfo.c                      |   7 -
 doc/README.scrapyard                     |   3 +
 doc/driver-model/UDM-pci.txt             |   6 +-
 drivers/serial/serial.c                  |   2 -
 include/asm-generic/u-boot.h             |   8 -
 include/common.h                         |   6 -
 include/configs/Alaska8220.h             | 334 -----------
 include/configs/Yukon8220.h              | 326 -----------
 include/configs/sorcery.h                | 298 ----------
 include/mpc8220.h                        | 717 -----------------------
 include/netdev.h                         |   1 -
 include/ppc_asm.tmpl                     |   2 +-
 50 files changed, 5 insertions(+), 9539 deletions(-)
 delete mode 100644 arch/powerpc/cpu/mpc8220/Makefile
 delete mode 100644 arch/powerpc/cpu/mpc8220/config.mk
 delete mode 100644 arch/powerpc/cpu/mpc8220/cpu.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/cpu_init.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/dma.h
 delete mode 100644 arch/powerpc/cpu/mpc8220/dramSetup.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/dramSetup.h
 delete mode 100644 arch/powerpc/cpu/mpc8220/fec.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/fec.h
 delete mode 100644 arch/powerpc/cpu/mpc8220/fec_dma_tasks.S
 delete mode 100644 arch/powerpc/cpu/mpc8220/i2c.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/i2cCore.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/i2cCore.h
 delete mode 100644 arch/powerpc/cpu/mpc8220/interrupts.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/io.S
 delete mode 100644 arch/powerpc/cpu/mpc8220/loadtask.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/pci.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/speed.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/start.S
 delete mode 100644 arch/powerpc/cpu/mpc8220/traps.c
 delete mode 100644 arch/powerpc/cpu/mpc8220/u-boot.lds
 delete mode 100644 arch/powerpc/cpu/mpc8220/uart.c
 delete mode 100644 arch/powerpc/include/asm/immap_8220.h
 delete mode 100644 board/alaska/Makefile
 delete mode 100644 board/alaska/README
 delete mode 100644 board/alaska/alaska.c
 delete mode 100644 board/alaska/flash.c
 delete mode 100644 board/sorcery/Makefile
 delete mode 100644 board/sorcery/sorcery.c
 delete mode 100644 include/configs/Alaska8220.h
 delete mode 100644 include/configs/Yukon8220.h
 delete mode 100644 include/configs/sorcery.h
 delete mode 100644 include/mpc8220.h

(limited to 'arch/powerpc')

diff --git a/MAKEALL b/MAKEALL
index 2737eab234a..2e16e0d9ade 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -267,12 +267,6 @@ LIST_8xx="$(boards_by_cpu mpc8xx)"
 
 LIST_4xx="$(boards_by_cpu ppc4xx)"
 
-#########################################################################
-## MPC8220 Systems
-#########################################################################
-
-LIST_8220="$(boards_by_cpu mpc8220)"
-
 #########################################################################
 ## MPC824x Systems
 #########################################################################
@@ -324,7 +318,6 @@ LIST_powerpc="		\
 	${LIST_512x}	\
 	${LIST_5xxx}	\
 	${LIST_8xx}	\
-	${LIST_8220}	\
 	${LIST_824x}	\
 	${LIST_8260}	\
 	${LIST_83xx}	\
diff --git a/README b/README
index d832bcbb7c6..3d81092057b 100644
--- a/README
+++ b/README
@@ -201,7 +201,6 @@ Directory Hierarchy:
       /mpc5xx		Files specific to Freescale MPC5xx CPUs
       /mpc5xxx		Files specific to Freescale MPC5xxx CPUs
       /mpc8xx		Files specific to Freescale MPC8xx CPUs
-      /mpc8220		Files specific to Freescale MPC8220 CPUs
       /mpc824x		Files specific to Freescale MPC824x CPUs
       /mpc8260		Files specific to Freescale MPC8260 CPUs
       /mpc85xx		Files specific to Freescale MPC85xx CPUs
diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c
index a3d981f9e38..ceb127103f5 100644
--- a/api/api_platform-powerpc.c
+++ b/api/api_platform-powerpc.c
@@ -55,8 +55,6 @@ int platform_sys_info(struct sys_info *si)
 #define bi_bar	bi_mbar_base
 #elif defined(CONFIG_MPC83xx)
 #define bi_bar	bi_immrbar
-#elif defined(CONFIG_MPC8220)
-#define bi_bar	bi_mbar_base
 #endif
 
 #if defined(bi_bar)
diff --git a/arch/powerpc/cpu/mpc8220/Makefile b/arch/powerpc/cpu/mpc8220/Makefile
deleted file mode 100644
index b8529efe912..00000000000
--- a/arch/powerpc/cpu/mpc8220/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).o
-
-START	= start.o
-SOBJS	= io.o fec_dma_tasks.o
-COBJS	= cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
-	  interrupts.o loadtask.o speed.o \
-	  traps.o uart.o pci.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/powerpc/cpu/mpc8220/config.mk b/arch/powerpc/cpu/mpc8220/config.mk
deleted file mode 100644
index 2c638b5c531..00000000000
--- a/arch/powerpc/cpu/mpc8220/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# (C) Copyright 2003-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \
-		     -mstring -mcpu=603e -mmultiple
diff --git a/arch/powerpc/cpu/mpc8220/cpu.c b/arch/powerpc/cpu/mpc8220/cpu.c
deleted file mode 100644
index 64e0526e88d..00000000000
--- a/arch/powerpc/cpu/mpc8220/cpu.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC8220 CPUs
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8220.h>
-#include <netdev.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
-	ulong clock = gd->cpu_clk;
-	char buf[32];
-
-	puts ("CPU:   ");
-
-	printf (CPU_ID_STR);
-
-	printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50));
-
-	printf (" at %s MHz\n", strmhz (buf, clock));
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile gptmr8220_t *gptmr = (volatile gptmr8220_t *) MMAP_GPTMR;
-	ulong msr;
-
-	/* Interrupts and MMU off */
-	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
-
-	msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
-	__asm__ __volatile__ ("mtmsr    %0"::"r" (msr));
-
-	/* Charge the watchdog timer */
-	gptmr->Prescl = 10;
-	gptmr->Count = 1;
-
-	gptmr->Mode = GPT_TMS_SGPIO;
-
-	gptmr->Control = GPT_CTRL_WDEN | GPT_CTRL_CE;
-
-	return 1;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = (gd->bus_clk + 3L) / 4L;
-
-	return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_MPC8220_FEC)
-	mpc8220_fec_initialize(bis);
-#endif
-	return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8220/cpu_init.c b/arch/powerpc/cpu/mpc8220/cpu_init.c
deleted file mode 100644
index 8f52c7dd0eb..00000000000
--- a/arch/powerpc/cpu/mpc8220/cpu_init.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- */
-void cpu_init_f (void)
-{
-	volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
-	volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
-	volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
-
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
-	/* Clear initial global data */
-	memset ((void *) gd, 0, sizeof (gd_t));
-
-	/* Clear all port configuration */
-	portcfg->pcfg0 = 0;
-	portcfg->pcfg1 = 0;
-	portcfg->pcfg2 = 0;
-	portcfg->pcfg3 = 0;
-	portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG;
-	portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG;
-
-	/*
-	 * Flexbus Controller: configure chip selects and enable them
-	 */
-#if defined (CONFIG_SYS_CS0_BASE)
-	flexbus->csar0 = CONFIG_SYS_CS0_BASE;
-
-/* Sorcery-C can hang-up after CTRL reg initialization */
-#if defined (CONFIG_SYS_CS0_CTRL)
-	flexbus->cscr0 = CONFIG_SYS_CS0_CTRL;
-#endif
-	flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1;
-	__asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS1_BASE)
-	flexbus->csar1 = CONFIG_SYS_CS1_BASE;
-	flexbus->cscr1 = CONFIG_SYS_CS1_CTRL;
-	flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1;
-	__asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS2_BASE)
-	flexbus->csar2 = CONFIG_SYS_CS2_BASE;
-	flexbus->cscr2 = CONFIG_SYS_CS2_CTRL;
-	flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG;
-	__asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS3_BASE)
-	flexbus->csar3 = CONFIG_SYS_CS3_BASE;
-	flexbus->cscr3 = CONFIG_SYS_CS3_CTRL;
-	flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG;
-	__asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS4_BASE)
-	flexbus->csar4 = CONFIG_SYS_CS4_BASE;
-	flexbus->cscr4 = CONFIG_SYS_CS4_CTRL;
-	flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG;
-	__asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS5_BASE)
-	flexbus->csar5 = CONFIG_SYS_CS5_BASE;
-	flexbus->cscr5 = CONFIG_SYS_CS5_CTRL;
-	flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1;
-	portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG;
-	__asm__ volatile ("sync");
-#endif
-
-	/* This section of the code cannot place in cpu_init_r(),
-	   it will cause the system to hang */
-	/* enable timebase */
-	xlbarb->addrTenTimeOut = 0x1000;
-	xlbarb->dataTenTimeOut = 0x1000;
-	xlbarb->busActTimeOut = 0x2000;
-
-	xlbarb->config = 0x00002000;
-
-	/* Master Priority Enable */
-	xlbarb->mastPriority = 0;
-	xlbarb->mastPriEn = 0xff;
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
-	/* this may belongs to disable interrupt section */
-	/* mask all interrupts */
-	*(vu_long *) 0xf0000700 = 0xfffffc00;
-	*(vu_long *) 0xf0000714 |= 0x0001ffff;
-	*(vu_long *) 0xf0000710 &= ~0x00000f00;
-
-	/* route critical ints to normal ints */
-	*(vu_long *) 0xf0000710 |= 0x00000001;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
-	/* load FEC microcode */
-	loadtask (0, 2);
-#endif
-	return (0);
-}
diff --git a/arch/powerpc/cpu/mpc8220/dma.h b/arch/powerpc/cpu/mpc8220/dma.h
deleted file mode 100644
index d06ee631394..00000000000
--- a/arch/powerpc/cpu/mpc8220/dma.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- *
- * MPC8220 dma header file
- */
-
-#ifndef __MPC8220_DMA_H
-#define __MPC8220_DMA_H
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Task number assignment */
-#define FEC_RECV_TASK_NO            0
-#define FEC_XMIT_TASK_NO            1
-
-/*---------------------------------------------------------------------
- * Stuff for Ethernet Tx/Rx tasks
- *---------------------------------------------------------------------
- */
-
-/* Layout of Ethernet controller Parameter SRAM area:
- * ----------------------------------------------------------------
- * 0x00: TBD_BASE, base address of TX BD ring
- * 0x04: TBD_NEXT, address of next TX BD to be processed
- * 0x08: RBD_BASE, base address of RX BD ring
- * 0x0C: RBD_NEXT, address of next RX BD to be processed
- * ---------------------------------------------------------------
- * ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH).
- */
-
-/* base address of SRAM area to store parameters used by Ethernet tasks */
-#define FEC_PARAM_BASE  (MMAP_SRAM + 0x5b00)
-
-/* base address of SRAM area for buffer descriptors */
-#define FEC_BD_BASE     (MMAP_SRAM + 0x5b20)
-
-/*---------------------------------------------------------------------
- * common shortcuts  used  by driver C code
- *---------------------------------------------------------------------
- */
-
-/* Disable SmartDMA task */
-#define DMA_TASK_DISABLE(tasknum)						\
-{										\
-	volatile ushort *tcr = (ushort *)(MMAP_DMA + 0x0000001c + 2 * tasknum); \
-	*tcr = (*tcr) & (~0x8000);						\
-}
-
-/* Enable SmartDMA task */
-#define DMA_TASK_ENABLE(tasknum)						\
-{										\
-	volatile ushort *tcr = (ushort *) (MMAP_DMA + 0x0000001c + 2 * tasknum);\
-	*tcr = (*tcr)  | 0x8000;						\
-}
-
-/* Clear interrupt pending bits */
-#define DMA_CLEAR_IEVENT(tasknum)						\
-{										\
-	struct mpc8220_dma *dma = (struct mpc8220_dma *)MMAP_DMA;		\
-	dma->IntPend = (1 << tasknum);						\
-}
-
-#endif  /* __MPC8220_DMA_H */
diff --git a/arch/powerpc/cpu/mpc8220/dramSetup.c b/arch/powerpc/cpu/mpc8220/dramSetup.c
deleted file mode 100644
index 52cf1333f79..00000000000
--- a/arch/powerpc/cpu/mpc8220/dramSetup.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-DESCRIPTION
-Read Dram spd and base on its information to calculate the memory size,
-characteristics to initialize the dram on MPC8220
-*/
-
-#include <common.h>
-#include <mpc8220.h>
-#include "i2cCore.h"
-#include "dramSetup.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SPD_SIZE	CONFIG_SYS_SDRAM_SPD_SIZE
-#define DRAM_SPD	(CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1	/* on Board SPD eeprom */
-#define TOTAL_BANK	CONFIG_SYS_SDRAM_TOTAL_BANKS
-
-int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
-{
-	int i;
-
-	for (i = 0; i < I2C_POLL_COUNT; i++) {
-		if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
-			return (OK);
-	}
-
-	return (ERROR);
-}
-
-int spd_clear (volatile i2c8220_t * pi2c)
-{
-	pi2c->adr = 0;
-	pi2c->fdr = 0;
-	pi2c->cr = 0;
-	pi2c->sr = 0;
-
-	return (OK);
-}
-
-int spd_stop (volatile i2c8220_t * pi2c)
-{
-	pi2c->cr &= ~I2C_CTL_STA;	/* Generate stop signal         */
-	if (spd_status (pi2c, I2C_STA_BB, 0) != OK)
-		return ERROR;
-
-	return (OK);
-}
-
-int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index)
-{
-	pi2c->sr &= ~I2C_STA_IF;	/* Clear Interrupt Bit          */
-	*readb = pi2c->dr;	/* Read a byte                  */
-
-	/*
-	   Set I2C_CTRL_TXAK will cause Transfer pending and
-	   set I2C_CTRL_STA will cause Interrupt pending
-	 */
-	if (*index != 2) {
-		if (spd_status (pi2c, I2C_STA_CF, 1) != OK)	/* Transfer not complete?       */
-			return ERROR;
-	}
-
-	if (*index != 1) {
-		if (spd_status (pi2c, I2C_STA_IF, 1) != OK)
-			return ERROR;
-	}
-
-	return (OK);
-}
-
-int readSpdData (u8 * spdData)
-{
-	volatile i2c8220_t *pi2cReg;
-	volatile pcfg8220_t *pcfg;
-	u8 slvAdr = DRAM_SPD;
-	u8 Tmp;
-	int Length = SPD_SIZE;
-	int i = 0;
-
-	/* Enable Port Configuration for SDA and SDL signals */
-	pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
-	__asm__ ("sync");
-	pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
-	__asm__ ("sync");
-
-	/* Points the structure to I2c mbar memory offset */
-	pi2cReg = (volatile i2c8220_t *) (MMAP_I2C);
-
-
-	/* Clear FDR, ADR, SR and CR reg */
-	pi2cReg->adr = 0;
-	pi2cReg->fdr = 0;
-	pi2cReg->cr = 0;
-	pi2cReg->sr = 0;
-
-	/* Set for fix XLB Bus Frequency */
-	switch (gd->bus_clk) {
-	case 60000000:
-		pi2cReg->fdr = 0x15;
-		break;
-	case 70000000:
-		pi2cReg->fdr = 0x16;
-		break;
-	case 80000000:
-		pi2cReg->fdr = 0x3a;
-		break;
-	case 90000000:
-		pi2cReg->fdr = 0x17;
-		break;
-	case 100000000:
-		pi2cReg->fdr = 0x3b;
-		break;
-	case 110000000:
-		pi2cReg->fdr = 0x18;
-		break;
-	case 120000000:
-		pi2cReg->fdr = 0x19;
-		break;
-	case 130000000:
-		pi2cReg->fdr = 0x1a;
-		break;
-	}
-
-	pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
-
-	pi2cReg->cr = I2C_CTL_EN;	/* Set Enable         */
-
-	/*
-	   The I2C bus should be in Idle state. If the bus is busy,
-	   clear the STA bit in control register
-	 */
-	if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) {
-		if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA)
-			pi2cReg->cr &= ~I2C_CTL_STA;
-
-		/* Check again if it is still busy, return error if found */
-		if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK)
-			return ERROR;
-	}
-
-	pi2cReg->cr |= I2C_CTL_TX;	/* Enable the I2c for TX, Ack   */
-	pi2cReg->cr |= I2C_CTL_STA;	/* Generate start signal        */
-
-	if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK)
-		return ERROR;
-
-
-	/* Write slave address */
-	pi2cReg->sr &= ~I2C_STA_IF;	/* Clear Interrupt              */
-	pi2cReg->dr = slvAdr;	/* Write a byte                 */
-
-	if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) {	/* Transfer not complete?       */
-		spd_stop (pi2cReg);
-		return ERROR;
-	}
-
-	if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
-		spd_stop (pi2cReg);
-		return ERROR;
-	}
-
-
-	/* Issue the offset to start */
-	pi2cReg->sr &= ~I2C_STA_IF;	/* Clear Interrupt              */
-	pi2cReg->dr = 0;	/* Write a byte                 */
-
-	if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) {	/* Transfer not complete?       */
-		spd_stop (pi2cReg);
-		return ERROR;
-	}
-
-	if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
-		spd_stop (pi2cReg);
-		return ERROR;
-	}
-
-
-	/* Set repeat start */
-	pi2cReg->cr |= I2C_CTL_RSTA;	/* Repeat Start                 */
-
-	pi2cReg->sr &= ~I2C_STA_IF;	/* Clear Interrupt              */
-	pi2cReg->dr = slvAdr | 1;	/* Write a byte                 */
-
-	if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) {	/* Transfer not complete?       */
-		spd_stop (pi2cReg);
-		return ERROR;
-	}
-
-	if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
-		spd_stop (pi2cReg);
-		return ERROR;
-	}
-
-	if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
-		return ERROR;
-
-	pi2cReg->cr &= ~I2C_CTL_TX;	/* Set receive mode             */
-
-	if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
-		return ERROR;
-
-	/* Dummy Read */
-	if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) {
-		spd_stop (pi2cReg);
-		return ERROR;
-	}
-
-	i = 0;
-	while (Length) {
-		if (Length == 2)
-			pi2cReg->cr |= I2C_CTL_TXAK;
-
-		if (Length == 1)
-			pi2cReg->cr &= ~I2C_CTL_STA;
-
-		if (spd_readbyte (pi2cReg, spdData, &Length) != OK) {
-			return spd_stop (pi2cReg);
-		}
-		i++;
-		Length--;
-		spdData++;
-	}
-
-	/* Stop the service */
-	spd_stop (pi2cReg);
-
-	return OK;
-}
-
-int getBankInfo (int bank, draminfo_t * pBank)
-{
-	int status;
-	int checksum;
-	int count;
-	u8 spdData[SPD_SIZE];
-
-
-	if (bank > 2 || pBank == 0) {
-		/* illegal values */
-		return (-42);
-	}
-
-	status = readSpdData (&spdData[0]);
-	if (status < 0)
-		return (-1);
-
-	/* check the checksum */
-	for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++)
-		checksum += spdData[count];
-
-	checksum = checksum - ((checksum / 256) * 256);
-
-	if (checksum != spdData[LOC_CHECKSUM])
-		return (-2);
-
-	/* Get the memory type */
-	if (!
-	    ((spdData[LOC_TYPE] == TYPE_DDR)
-	     || (spdData[LOC_TYPE] == TYPE_SDR)))
-		/* not one of the types we support */
-		return (-3);
-
-	pBank->type = spdData[LOC_TYPE];
-
-	/* Set logical banks */
-	pBank->banks = spdData[LOC_LOGICAL_BANKS];
-
-	/* Check that we have enough physical banks to cover the bank we are
-	 * figuring out.  Odd-numbered banks correspond to the second bank
-	 * on the device.
-	 */
-	if (bank & 1) {
-		/* Second bank of a "device" */
-		if (spdData[LOC_PHYS_BANKS] < 2)
-			/* this bank doesn't exist on the "device" */
-			return (-4);
-
-		if (spdData[LOC_ROWS] & 0xf0)
-			/* Two asymmetric banks */
-			pBank->rows = spdData[LOC_ROWS] >> 4;
-		else
-			pBank->rows = spdData[LOC_ROWS];
-
-		if (spdData[LOC_COLS] & 0xf0)
-			/* Two asymmetric banks */
-			pBank->cols = spdData[LOC_COLS] >> 4;
-		else
-			pBank->cols = spdData[LOC_COLS];
-	} else {
-		/* First bank of a "device" */
-		pBank->rows = spdData[LOC_ROWS];
-		pBank->cols = spdData[LOC_COLS];
-	}
-
-	pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW];
-	pBank->bursts = spdData[LOC_BURSTS];
-	pBank->CAS = spdData[LOC_CAS];
-	pBank->CS = spdData[LOC_CS];
-	pBank->WE = spdData[LOC_WE];
-	pBank->Trp = spdData[LOC_Trp];
-	pBank->Trcd = spdData[LOC_Trcd];
-	pBank->buffered = spdData[LOC_Buffered] & 1;
-	pBank->refresh = spdData[LOC_REFRESH];
-
-	return (0);
-}
-
-
-/* checkMuxSetting -- given a row/column device geometry, return a mask
- *                    of the valid DRAM controller addr_mux settings for
- *                    that geometry.
- *
- *  Arguments:        u8 rows:     number of row addresses in this device
- *                    u8 columns:  number of column addresses in this device
- *
- *  Returns:          a mask of the allowed addr_mux settings for this
- *                    geometry.  Each bit in the mask represents a
- *                    possible addr_mux settings (for example, the
- *                    (1<<2) bit in the mask represents the 0b10 setting)/
- *
- */
-u8 checkMuxSetting (u8 rows, u8 columns)
-{
-	muxdesc_t *pIdx, *pMux;
-	u8 mask;
-	int lrows, lcolumns;
-	u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff };
-
-	/* Setup MuxDescriptor in SRAM space */
-	/* MUXDESC AddressRuns [] = {
-	   { 0, 8, 12, 4 },         / setting, columns, rows, extra columns /
-	   { 1, 8, 13, 3 },         / setting, columns, rows, extra columns /
-	   { 2, 8, 14, 2 },         / setting, columns, rows, extra columns /
-	   { 0xff }                 / list terminator /
-	   }; */
-
-	pIdx = (muxdesc_t *) & mux[0];
-
-	/* Check rows x columns against each possible address mux setting */
-	for (pMux = pIdx, mask = 0;; pMux++) {
-		lrows = rows;
-		lcolumns = columns;
-
-		if (pMux->MuxValue == 0xff)
-			break;	/* end of list */
-
-		/* For a given mux setting, since we want all the memory in a
-		 * device to be contiguous, we want the device "use up" the
-		 * address lines such that there are no extra column or row
-		 * address lines on the device.
-		 */
-
-		lcolumns -= pMux->Columns;
-		if (lcolumns < 0)
-			/* Not enough columns to get to the rows */
-			continue;
-
-		lrows -= pMux->Rows;
-		if (lrows > 0)
-			/* we have extra rows left -- can't do that! */
-			continue;
-
-		/* At this point, we either have to have used up all the
-		 * rows or we have to have no columns left.
-		 */
-
-		if (lcolumns != 0 && lrows != 0)
-			/* rows AND columns are left.  Bad! */
-			continue;
-
-		lcolumns -= pMux->MoreColumns;
-
-		if (lcolumns <= 0)
-			mask |= (1 << pMux->MuxValue);
-	}
-
-	return (mask);
-}
-
-
-u32 dramSetup (void)
-{
-	draminfo_t DramInfo[TOTAL_BANK];
-	draminfo_t *pDramInfo;
-	u32 size, temp, cfg_value, mode_value, refresh;
-	u8 *ptr;
-	u8 bursts, Trp, Trcd, type, buffered;
-	u8 muxmask, rows, columns;
-	int count, banknum;
-	u32 *prefresh, *pIdx;
-	u32 refrate[8] = { 15625, 3900, 7800, 31300,
-		62500, 125000, 0xffffffff, 0xffffffff
-	};
-	volatile sysconf8220_t *sysconf;
-	volatile memctl8220_t *memctl;
-
-	sysconf = (volatile sysconf8220_t *) MMAP_MBAR;
-	memctl = (volatile memctl8220_t *) MMAP_MEMCTL;
-
-	/* Set everything in the descriptions to zero */
-	ptr = (u8 *) & DramInfo[0];
-	for (count = 0; count < sizeof (DramInfo); count++)
-		*ptr++ = 0;
-
-	for (banknum = 0; banknum < TOTAL_BANK; banknum++)
-		sysconf->cscfg[banknum];
-
-	/* Descriptions of row/column address muxing for various
-	 * addr_mux settings.
-	 */
-
-	pIdx = prefresh = (u32 *) & refrate[0];
-
-	/* Get all the info for all three logical banks */
-	bursts = 0xff;
-	Trp = 0;
-	Trcd = 0;
-	type = 0;
-	buffered = 0xff;
-	refresh = 0xffffffff;
-	muxmask = 0xff;
-
-	/* Two bank, CS0 and CS1 */
-	for (banknum = 0, pDramInfo = &DramInfo[0];
-	     banknum < TOTAL_BANK; banknum++, pDramInfo++) {
-		pDramInfo->ordinal = banknum;	/* initial sorting */
-		if (getBankInfo (banknum, pDramInfo) < 0)
-			continue;
-
-		/* get cumulative parameters of all three banks */
-		if (type && pDramInfo->type != type)
-			return 0;
-
-		type = pDramInfo->type;
-		rows = pDramInfo->rows;
-		columns = pDramInfo->cols;
-
-		/* This chip only supports 13 DRAM memory lines, but some devices
-		 * have 14 rows.  To deal with this, ignore the 14th address line
-		 * by limiting the number of rows (and columns) to 13.  This will
-		 * mean that for 14-row devices we will only be able to use
-		 * half of the memory, but it's better than nothing.
-		 */
-		if (rows > 13)
-			rows = 13;
-		if (columns > 13)
-			columns = 13;
-
-		pDramInfo->size =
-			((1 << (rows + columns)) * pDramInfo->width);
-		pDramInfo->size *= pDramInfo->banks;
-		pDramInfo->size >>= 3;
-
-		/* figure out which addr_mux configurations will support this device */
-		muxmask &= checkMuxSetting (rows, columns);
-		if (muxmask == 0)
-			return 0;
-
-		buffered = pDramInfo->buffered;
-		bursts &= pDramInfo->bursts;	/* union of all bursts */
-		if (pDramInfo->Trp > Trp)	/* worst case (longest) Trp */
-			Trp = pDramInfo->Trp;
-
-		if (pDramInfo->Trcd > Trcd)	/* worst case (longest) Trcd */
-			Trcd = pDramInfo->Trcd;
-
-		prefresh = pIdx;
-		/* worst case (shortest) Refresh period */
-		if (refresh > prefresh[pDramInfo->refresh & 7])
-			refresh = prefresh[pDramInfo->refresh & 7];
-
-	}			/* for loop */
-
-
-	/* We only allow a burst length of 8! */
-	if (!(bursts & 8))
-		bursts = 8;
-
-	/* Sort the devices.  In order to get each chip select region
-	 * aligned properly, put the biggest device at the lowest address.
-	 * A simple bubble sort will do the trick.
-	 */
-	for (banknum = 0, pDramInfo = &DramInfo[0];
-	     banknum < TOTAL_BANK; banknum++, pDramInfo++) {
-		int i;
-
-		for (i = 0; i < TOTAL_BANK; i++) {
-			if (pDramInfo->size < DramInfo[i].size &&
-			    pDramInfo->ordinal < DramInfo[i].ordinal) {
-				/* If the current bank is smaller, but if the ordinal is also
-				 * smaller, swap the ordinals
-				 */
-				u8 temp8;
-
-				temp8 = DramInfo[i].ordinal;
-				DramInfo[i].ordinal = pDramInfo->ordinal;
-				pDramInfo->ordinal = temp8;
-			}
-		}
-	}
-
-
-	/* Now figure out the base address for each bank.  While
-	 * we're at it, figure out how much memory there is.
-	 *
-	 */
-	size = 0;
-	for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
-		int i;
-
-		for (i = 0; i < TOTAL_BANK; i++) {
-			if (DramInfo[i].ordinal == banknum
-			    && DramInfo[i].size != 0) {
-				DramInfo[i].base = size;
-				size += DramInfo[i].size;
-			}
-		}
-	}
-
-	/* Set up the Drive Strength register */
-	sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
-
-	/* ********************** Cfg 1 ************************* */
-
-	/* Set the single read to read/write/precharge delay */
-	cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb);
-
-	/* Set the single write to read/write/precharge delay.
-	 * This may or may not be correct.  The controller spec
-	 * says "tWR", but "tWR" does not appear in the SPD.  It
-	 * always seems to be 15nsec for the class of device we're
-	 * using, which turns out to be 2 clock cycles at 133MHz,
-	 * so that's what we're going to use.
-	 *
-	 * HOWEVER, because of a bug in the controller, for DDR
-	 * we need to set this to be the same as the value
-	 * calculated for bwt2rwp.
-	 */
-	cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2);
-
-	/* Set the Read CAS latency.  We're going to use a CL of
-	 * 2.5 for DDR and 2 SDR.
-	 */
-	cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2);
-
-
-	/* Set the Active to Read/Write delay.  This depends
-	 * on Trcd which is reported as nanoseconds times 4.
-	 * We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz)
-	 * which gives us a dimensionless quantity.  Play games with
-	 * the divisions so we don't run out of dynamic ranges.
-	 */
-	/* account for megaherz and the times 4 */
-	temp = (Trcd * (gd->bus_clk / 1000000)) / 4;
-
-	/* account for nanoseconds and round up, with a minimum value of 2 */
-	temp = ((temp + 999) / 1000) - 1;
-	if (temp < 2)
-		temp = 2;
-
-	cfg_value |= CFG1_ACT2WR (temp);
-
-	/* Set the precharge to active delay.  This depends
-	 * on Trp which is reported as nanoseconds times 4.
-	 * We want to calculate Trp (in nanoseconds) times XLB clock (in Hz)
-	 * which gives us a dimensionless quantity.  Play games with
-	 * the divisions so we don't run out of dynamic ranges.
-	 */
-	/* account for megaherz and the times 4 */
-	temp = (Trp * (gd->bus_clk / 1000000)) / 4;
-
-	/* account for nanoseconds and round up, then subtract 1, with a
-	 * minumum value of 1 and a maximum value of 7.
-	 */
-	temp = (((temp + 999) / 1000) - 1) & 7;
-	if (temp < 1)
-		temp = 1;
-
-	cfg_value |= CFG1_PRE2ACT (temp);
-
-	/* Set refresh to active delay.  This depends
-	 * on Trfc which is not reported in the SPD.
-	 * We'll use a nominal value of 75nsec which is
-	 * what the controller spec uses.
-	 */
-	temp = (75 * (gd->bus_clk / 1000000));
-	/* account for nanoseconds and round up, then subtract 1 */
-	cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1);
-
-	/* Set the write latency, using the values given in the controller spec */
-	cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0);
-	memctl->cfg1 = cfg_value;	/* cfg 1 */
-	asm volatile ("sync");
-
-
-	/* ********************** Cfg 2 ************************* */
-
-	/* Set the burst read to read/precharge delay */
-	cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8);
-
-	/* Set the burst write to read/precharge delay.  Semi-magic numbers
-	 * based on the controller spec recommendations, assuming tWR is
-	 * two clock cycles.
-	 */
-	cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10);
-
-	/* Set the Burst read to write delay.  Semi-magic numbers
-	 * based on the DRAM controller documentation.
-	 */
-	cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb);
-
-	/* Set the burst length -- must be 8!! Well, 7, actually, becuase
-	 * it's burst lenght minus 1.
-	 */
-	cfg_value |= CFG2_BURSTLEN (7);
-	memctl->cfg2 = cfg_value;	/* cfg 2 */
-	asm volatile ("sync");
-
-
-	/* ********************** mode ************************* */
-
-	/* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit,
-	 * disable automatic refresh.
-	 */
-	cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH |
-		((type == TYPE_DDR) ? CTL_DDR_MODE : 0);
-
-	/* Set the address mux based on whichever setting(s) is/are common
-	 * to all the devices we have.  If there is more than one, choose
-	 * one arbitrarily.
-	 */
-	if (muxmask & 0x4)
-		cfg_value |= CTL_ADDRMUX (2);
-	else if (muxmask & 0x2)
-		cfg_value |= CTL_ADDRMUX (1);
-	else
-		cfg_value |= CTL_ADDRMUX (0);
-
-	/* Set the refresh interval. */
-	temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1;
-	cfg_value |= CTL_REFRESH_INTERVAL (temp);
-
-	/* Set buffered/non-buffered memory */
-	if (buffered)
-		cfg_value |= CTL_BUFFERED;
-
-	memctl->ctrl = cfg_value;	/* ctrl */
-	asm volatile ("sync");
-
-	if (type == TYPE_DDR) {
-		/* issue precharge all */
-		temp = cfg_value | CTL_PRECHARGE_CMD;
-		memctl->ctrl = temp;	/* ctrl */
-		asm volatile ("sync");
-	}
-
-
-	/* Set up mode value for CAS latency */
-#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
-	mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
-		MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
-#else
-	mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
-		      MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD);
-#endif
-	asm volatile ("sync");
-
-	/* Write Extended Mode  - enable DLL */
-	if (type == TYPE_DDR) {
-		temp = MODE_EXTENDED | MODE_X_DLL_ENABLE |
-			MODE_X_DS_NORMAL | MODE_CMD;
-		memctl->mode = (temp >> 16);	/* mode */
-		asm volatile ("sync");
-
-		/* Write Mode - reset DLL, set CAS latency */
-		temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL);
-		memctl->mode = (temp >> 16);	/* mode */
-		asm volatile ("sync");
-	}
-
-	/* Program the chip selects. */
-	for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
-		if (DramInfo[banknum].size != 0) {
-			u32 mask;
-			int i;
-
-			for (i = 0, mask = 1; i < 32; mask <<= 1, i++) {
-				if (DramInfo[banknum].size & mask)
-					break;
-			}
-			temp = (DramInfo[banknum].base & 0xfff00000) | (i -
-									1);
-
-			sysconf->cscfg[banknum] = temp;
-			asm volatile ("sync");
-		}
-	}
-
-	/* Wait for DLL lock */
-	udelay (200);
-
-	temp = cfg_value | CTL_PRECHARGE_CMD;	/* issue precharge all */
-	memctl->ctrl = temp;	/* ctrl */
-	asm volatile ("sync");
-
-	temp = cfg_value | CTL_REFRESH_CMD;	/* issue precharge all */
-	memctl->ctrl = temp;	/* ctrl */
-	asm volatile ("sync");
-
-	memctl->ctrl = temp;	/* ctrl */
-	asm volatile ("sync");
-
-	/* Write Mode - DLL normal */
-	temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL);
-	memctl->mode = (temp >> 16);	/* mode */
-	asm volatile ("sync");
-
-	/* Enable refresh, enable DQS's (if DDR), and lock the control register */
-	cfg_value &= ~CTL_MODE_ENABLE;	/* lock register */
-	cfg_value |= CTL_REFRESH_ENABLE;	/* enable refresh */
-
-	if (type == TYPE_DDR)
-		cfg_value |= CTL_DQSOEN (0xf);	/* enable DQS's for DDR */
-
-	memctl->ctrl = cfg_value;	/* ctrl */
-	asm volatile ("sync");
-
-	return size;
-}
diff --git a/arch/powerpc/cpu/mpc8220/dramSetup.h b/arch/powerpc/cpu/mpc8220/dramSetup.h
deleted file mode 100644
index 3b64e088cd8..00000000000
--- a/arch/powerpc/cpu/mpc8220/dramSetup.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * dramSetup.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCdramsetuph
-#define __INCdramsetuph
-#ifndef __ASSEMBLY__
-/* Where various things are in the SPD */
-#define LOC_TYPE                    2
-#define LOC_CHECKSUM                63
-#define LOC_PHYS_BANKS              5
-#define LOC_LOGICAL_BANKS           17
-#define LOC_ROWS                    3
-#define LOC_COLS                    4
-#define LOC_WIDTH_HIGH              7
-#define LOC_WIDTH_LOW               6
-#define LOC_REFRESH                 12
-#define LOC_BURSTS                  16
-#define LOC_CAS                     18
-#define LOC_CS                      19
-#define LOC_WE                      20
-#define LOC_Tcyc                    9
-#define LOC_Tac                     10
-#define LOC_Trp                     27
-#define LOC_Trrd                    28
-#define LOC_Trcd                    29
-#define LOC_Tras                    30
-#define LOC_Buffered                21
-/* Types of memory the SPD can tell us about.
- * We can actually only use SDRAM and DDR.
- */
-#define TYPE_DRAM                   1	/* plain old dram */
-#define TYPE_EDO                    2	/* EDO dram */
-#define TYPE_Nibble                 3	/* serial nibble memory */
-#define TYPE_SDR                    4	/* SDRAM */
-#define TYPE_ROM                    5	/*  */
-#define TYPE_SGRRAM                 6	/* graphics memory */
-#define TYPE_DDR                    7	/* DDR sdram */
-#define SDRAMDS_MASK        0x3	/* each field is 2 bits wide */
-#define SDRAMDS_SBE_SHIFT     8	/* Clock enable drive strength */
-#define SDRAMDS_SBC_SHIFT     6	/* Clocks drive strength */
-#define SDRAMDS_SBA_SHIFT     4	/* Address drive strength */
-#define SDRAMDS_SBS_SHIFT     2	/* SDR DQS drive strength */
-#define SDRAMDS_SBD_SHIFT     0	/* Data and DQS drive strength */
-#define  DRIVE_STRENGTH_HIGH 0
-#define  DRIVE_STRENGTH_MED  1
-#define  DRIVE_STRENGTH_LOW  2
-#define  DRIVE_STRENGTH_OFF  3
-
-#define OK      0
-#define ERROR   -1
-/* Structure to hold information about address muxing. */
-	typedef struct tagMuxDescriptor {
-	u8 MuxValue;
-	u8 Columns;
-	u8 Rows;
-	u8 MoreColumns;
-} muxdesc_t;
-
-/* Structure to define one physical bank of
- * memory.  Note that dram size in bytes is
- * (2^^(rows+columns)) * width * banks / 8
-*/
-typedef struct tagDramInfo {
-	u32 size;		/* size in bytes */
-	u32 base;		/* base address */
-	u8 ordinal;		/* where in the memory map will we put this */
-	u8 type;
-	u8 rows;
-	u8 cols;
-	u16 width;		/* width of each chip in bits */
-	u8 banks;		/* number of chips, aka logical banks */
-	u8 bursts;		/* bit-encoded allowable burst length */
-	u8 CAS;			/* bit-encoded CAS latency values */
-	u8 CS;			/* bit-encoded CS latency values */
-	u8 WE;			/* bit-encoded WE latency values */
-	u8 Trp;			/* bit-encoded row precharge time */
-	u8 Trcd;		/* bit-encoded RAS to CAS delay */
-	u8 buffered;		/* buffered or not */
-	u8 refresh;		/* encoded refresh rate */
-} draminfo_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCdramsetuph */
diff --git a/arch/powerpc/cpu/mpc8220/fec.c b/arch/powerpc/cpu/mpc8220/fec.c
deleted file mode 100644
index 43fa802ca96..00000000000
--- a/arch/powerpc/cpu/mpc8220/fec.c
+++ /dev/null
@@ -1,961 +0,0 @@
-/*
- * (C) Copyright 2003-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.c,
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include "dma.h"
-#include "fec.h"
-
-#undef  DEBUG
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#ifdef DEBUG
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
-#endif /* DEBUG */
-
-typedef struct {
-	u8 data[1500];		/* actual data */
-	int length;		/* actual length */
-	int used;		/* buffer in use or not */
-	u8 head[16];		/* MAC header(6 + 6 + 2) + 2(aligned) */
-} NBUF;
-
-int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal);
-int fec8220_miiphy_write (const char *devname, u8 phyAddr, u8 regAddr, u16 data);
-
-/********************************************************************/
-#ifdef DEBUG
-static void mpc8220_fec_phydump (char *devname)
-{
-	u16 phyStatus, i;
-	u8 phyAddr = CONFIG_PHY_ADDR;
-	u8 reg_mask[] = {
-#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
-		/* regs to print: 0...7, 16...19, 21, 23, 24 */
-		1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
-		1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
-#else
-		/* regs to print: 0...8, 16...20 */
-		1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
-		1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-#endif
-	};
-
-	for (i = 0; i < 32; i++) {
-		if (reg_mask[i]) {
-			miiphy_read (devname, phyAddr, i, &phyStatus);
-			printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
-		}
-	}
-}
-#endif
-
-/********************************************************************/
-static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec)
-{
-	int ix;
-	char *data;
-	static int once = 0;
-
-	for (ix = 0; ix < FEC_RBD_NUM; ix++) {
-		if (!once) {
-			data = (char *) malloc (FEC_MAX_PKT_SIZE);
-			if (data == NULL) {
-				printf ("RBD INIT FAILED\n");
-				return -1;
-			}
-			fec->rbdBase[ix].dataPointer = (u32) data;
-		}
-		fec->rbdBase[ix].status = FEC_RBD_EMPTY;
-		fec->rbdBase[ix].dataLength = 0;
-	}
-	once++;
-
-	/*
-	 * have the last RBD to close the ring
-	 */
-	fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
-	fec->rbdIndex = 0;
-
-	return 0;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec)
-{
-	int ix;
-
-	for (ix = 0; ix < FEC_TBD_NUM; ix++) {
-		fec->tbdBase[ix].status = 0;
-	}
-
-	/*
-	 * Have the last TBD to close the ring
-	 */
-	fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
-
-	/*
-	 * Initialize some indices
-	 */
-	fec->tbdIndex = 0;
-	fec->usedTbdIndex = 0;
-	fec->cleanTbdNum = FEC_TBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd)
-{
-	/*
-	 * Reset buffer descriptor as empty
-	 */
-	if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
-		pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
-	else
-		pRbd->status = FEC_RBD_EMPTY;
-
-	pRbd->dataLength = 0;
-
-	/*
-	 * Now, we have an empty RxBD, restart the SmartDMA receive task
-	 */
-	DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
-	/*
-	 * Increment BD count
-	 */
-	fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
-{
-	FEC_TBD *pUsedTbd;
-
-#ifdef DEBUG
-	printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
-		fec->cleanTbdNum, fec->usedTbdIndex);
-#endif
-
-	/*
-	 * process all the consumed TBDs
-	 */
-	while (fec->cleanTbdNum < FEC_TBD_NUM) {
-		pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
-		if (pUsedTbd->status & FEC_TBD_READY) {
-#ifdef DEBUG
-			printf ("Cannot clean TBD %d, in use\n",
-				fec->cleanTbdNum);
-#endif
-			return;
-		}
-
-		/*
-		 * clean this buffer descriptor
-		 */
-		if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
-			pUsedTbd->status = FEC_TBD_WRAP;
-		else
-			pUsedTbd->status = 0;
-
-		/*
-		 * update some indeces for a correct handling of the TBD ring
-		 */
-		fec->cleanTbdNum++;
-		fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
-	}
-}
-
-/********************************************************************/
-static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac)
-{
-	u8 currByte;		/* byte for which to compute the CRC */
-	int byte;		/* loop - counter */
-	int bit;		/* loop - counter */
-	u32 crc = 0xffffffff;	/* initial value */
-
-	/*
-	 * The algorithm used is the following:
-	 * we loop on each of the six bytes of the provided address,
-	 * and we compute the CRC by left-shifting the previous
-	 * value by one position, so that each bit in the current
-	 * byte of the address may contribute the calculation. If
-	 * the latter and the MSB in the CRC are different, then
-	 * the CRC value so computed is also ex-ored with the
-	 * "polynomium generator". The current byte of the address
-	 * is also shifted right by one bit at each iteration.
-	 * This is because the CRC generatore in hardware is implemented
-	 * as a shift-register with as many ex-ores as the radixes
-	 * in the polynomium. This suggests that we represent the
-	 * polynomiumm itself as a 32-bit constant.
-	 */
-	for (byte = 0; byte < 6; byte++) {
-		currByte = mac[byte];
-		for (bit = 0; bit < 8; bit++) {
-			if ((currByte & 0x01) ^ (crc & 0x01)) {
-				crc >>= 1;
-				crc = crc ^ 0xedb88320;
-			} else {
-				crc >>= 1;
-			}
-			currByte >>= 1;
-		}
-	}
-
-	crc = crc >> 26;
-
-	/*
-	 * Set individual hash table register
-	 */
-	if (crc >= 32) {
-		fec->eth->iaddr1 = (1 << (crc - 32));
-		fec->eth->iaddr2 = 0;
-	} else {
-		fec->eth->iaddr1 = 0;
-		fec->eth->iaddr2 = (1 << crc);
-	}
-
-	/*
-	 * Set physical address
-	 */
-	fec->eth->paddr1 =
-		(mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
-	fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
-}
-
-/********************************************************************/
-static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
-{
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
-	const u8 phyAddr = CONFIG_PHY_ADDR;	/* Only one PHY */
-
-#ifdef DEBUG
-	printf ("mpc8220_fec_init... Begin\n");
-#endif
-
-	/*
-	 * Initialize RxBD/TxBD rings
-	 */
-	mpc8220_fec_rbd_init (fec);
-	mpc8220_fec_tbd_init (fec);
-
-	/*
-	 * Set up Pin Muxing for FEC 1
-	 */
-	*(vu_long *) MMAP_PCFG = 0;
-	*(vu_long *) (MMAP_PCFG + 4) = 0;
-	/*
-	 * Clear FEC-Lite interrupt event register(IEVENT)
-	 */
-	fec->eth->ievent = 0xffffffff;
-
-	/*
-	 * Set interrupt mask register
-	 */
-	fec->eth->imask = 0x00000000;
-
-	/*
-	 * Set FEC-Lite receive control register(R_CNTRL):
-	 */
-	if (fec->xcv_type == SEVENWIRE) {
-		/*
-		 * Frame length=1518; 7-wire mode
-		 */
-		fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
-	} else {
-		/*
-		 * Frame length=1518; MII mode;
-		 */
-		fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
-	}
-
-	fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
-	if (fec->xcv_type != SEVENWIRE) {
-		/*
-		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
-		 * and do not drop the Preamble.
-		 */
-		/*
-		 * tbd - rtm
-		 * fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
-		 * No MII for 7-wire mode
-		 */
-		fec->eth->mii_speed = 0x00000030;
-	}
-
-	/*
-	 * Set Opcode/Pause Duration Register
-	 */
-	fec->eth->op_pause = 0x00010020;	/*FIXME0xffff0020; */
-
-	/*
-	 * Set Rx FIFO alarm and granularity value
-	 */
-	fec->eth->rfifo_cntrl = 0x0c000000;
-	fec->eth->rfifo_alarm = 0x0000030c;
-#ifdef DEBUG
-	if (fec->eth->rfifo_status & 0x00700000) {
-		printf ("mpc8220_fec_init() RFIFO error\n");
-	}
-#endif
-
-	/*
-	 * Set Tx FIFO granularity value
-	 */
-	/*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
-	fec->eth->tfifo_cntrl = 0x0e000000;
-#ifdef DEBUG
-	printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
-	printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
-#endif
-
-	/*
-	 * Set transmit fifo watermark register(X_WMRK), default = 64
-	 */
-	fec->eth->tfifo_alarm = 0x00000080;
-	fec->eth->x_wmrk = 0x2;
-
-	/*
-	 * Set individual address filter for unicast address
-	 * and set physical address registers.
-	 */
-	mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr));
-
-	/*
-	 * Set multicast address filter
-	 */
-	fec->eth->gaddr1 = 0x00000000;
-	fec->eth->gaddr2 = 0x00000000;
-
-	/*
-	 * Turn ON cheater FSM: ????
-	 */
-	fec->eth->xmit_fsm = 0x03000000;
-
-#if 1
-/*#if defined(CONFIG_MPC5200)*/
-	/*
-	 * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
-	 * work w/ the current receive task.
-	 */
-	dma->PtdCntrl |= 0x00000001;
-#endif
-
-	/*
-	 * Set priority of different initiators
-	 */
-	dma->IPR0 = 7;		/* always */
-	dma->IPR3 = 6;		/* Eth RX */
-	dma->IPR4 = 5;		/* Eth Tx */
-
-	/*
-	 * Clear SmartDMA task interrupt pending bits
-	 */
-	DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
-
-	/*
-	 * Initialize SmartDMA parameters stored in SRAM
-	 */
-	*(int *) FEC_TBD_BASE = (int) fec->tbdBase;
-	*(int *) FEC_RBD_BASE = (int) fec->rbdBase;
-	*(int *) FEC_TBD_NEXT = (int) fec->tbdBase;
-	*(int *) FEC_RBD_NEXT = (int) fec->rbdBase;
-
-	if (fec->xcv_type != SEVENWIRE) {
-		/*
-		 * Initialize PHY(LXT971A):
-		 *
-		 *   Generally, on power up, the LXT971A reads its configuration
-		 *   pins to check for forced operation, If not cofigured for
-		 *   forced operation, it uses auto-negotiation/parallel detection
-		 *   to automatically determine line operating conditions.
-		 *   If the PHY device on the other side of the link supports
-		 *   auto-negotiation, the LXT971A auto-negotiates with it
-		 *   using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
-		 *   support auto-negotiation, the LXT971A automatically detects
-		 *   the presence of either link pulses(10Mbps PHY) or Idle
-		 *   symbols(100Mbps) and sets its operating conditions accordingly.
-		 *
-		 *   When auto-negotiation is controlled by software, the following
-		 *   steps are recommended.
-		 *
-		 * Note:
-		 *   The physical address is dependent on hardware configuration.
-		 *
-		 */
-		int timeout = 1;
-		u16 phyStatus;
-
-		/*
-		 * Reset PHY, then delay 300ns
-		 */
-		miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
-		udelay (1000);
-
-		if (fec->xcv_type == MII10) {
-			/*
-			 * Force 10Base-T, FDX operation
-			 */
-#ifdef DEBUG
-			printf ("Forcing 10 Mbps ethernet link... ");
-#endif
-			miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-			/*
-			   miiphy_write(fec, phyAddr, 0x0, 0x0100);
-			 */
-			miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
-
-			timeout = 20;
-			do {	/* wait for link status to go down */
-				udelay (10000);
-				if ((timeout--) == 0) {
-#ifdef DEBUG
-					printf ("hmmm, should not have waited...");
-#endif
-					break;
-				}
-				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
-				printf ("=");
-#endif
-			} while ((phyStatus & 0x0004)); /* !link up */
-
-			timeout = 1000;
-			do {	/* wait for link status to come back up */
-				udelay (10000);
-				if ((timeout--) == 0) {
-					printf ("failed. Link is down.\n");
-					break;
-				}
-				miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
-				printf ("+");
-#endif
-			} while (!(phyStatus & 0x0004));	/* !link up */
-
-#ifdef DEBUG
-			printf ("done.\n");
-#endif
-		} else {	/* MII100 */
-			/*
-			 * Set the auto-negotiation advertisement register bits
-			 */
-			miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
-
-			/*
-			 * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
-			 */
-			miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
-
-			/*
-			 * Wait for AN completion
-			 */
-			timeout = 5000;
-			do {
-				udelay (1000);
-
-				if ((timeout--) == 0) {
-#ifdef DEBUG
-					printf ("PHY auto neg 0 failed...\n");
-#endif
-					return -1;
-				}
-
-				if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
-				    0) {
-#ifdef DEBUG
-					printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
-#endif
-					return -1;
-				}
-			} while (!(phyStatus & 0x0004));
-
-#ifdef DEBUG
-			printf ("PHY auto neg complete! \n");
-#endif
-		}
-
-	}
-
-	/*
-	 * Enable FEC-Lite controller
-	 */
-	fec->eth->ecntrl |= 0x00000006;
-
-#ifdef DEBUG
-	if (fec->xcv_type != SEVENWIRE)
-		mpc8220_fec_phydump (dev->name);
-#endif
-
-	/*
-	 * Enable SmartDMA receive task
-	 */
-	DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
-#ifdef DEBUG
-	printf ("mpc8220_fec_init... Done \n");
-#endif
-
-	return 1;
-}
-
-/********************************************************************/
-static void mpc8220_fec_halt (struct eth_device *dev)
-{
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	int counter = 0xffff;
-
-#ifdef DEBUG
-	if (fec->xcv_type != SEVENWIRE)
-		mpc8220_fec_phydump (dev->name);
-#endif
-
-	/*
-	 * mask FEC chip interrupts
-	 */
-	fec->eth->imask = 0;
-
-	/*
-	 * issue graceful stop command to the FEC transmitter if necessary
-	 */
-	fec->eth->x_cntrl |= 0x00000001;
-
-	/*
-	 * wait for graceful stop to register
-	 */
-	while ((counter--) && (!(fec->eth->ievent & 0x10000000)));
-
-	/*
-	 * Disable SmartDMA tasks
-	 */
-	DMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
-	DMA_TASK_DISABLE (FEC_RECV_TASK_NO);
-
-	/*
-	 * Disable the Ethernet Controller
-	 */
-	fec->eth->ecntrl &= 0xfffffffd;
-
-	/*
-	 * Clear FIFO status registers
-	 */
-	fec->eth->rfifo_status &= 0x00700000;
-	fec->eth->tfifo_status &= 0x00700000;
-
-	fec->eth->reset_cntrl = 0x01000000;
-
-	/*
-	 * Issue a reset command to the FEC chip
-	 */
-	fec->eth->ecntrl |= 0x1;
-
-	/*
-	 * wait at least 16 clock cycles
-	 */
-	udelay (10);
-
-#ifdef DEBUG
-	printf ("Ethernet task stopped\n");
-#endif
-}
-
-#ifdef DEBUG
-/********************************************************************/
-
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
-	u16 phyAddr = CONFIG_PHY_ADDR;
-	u16 phyStatus;
-
-	if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
-	    || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
-
-		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
-		printf ("\nphyStatus: 0x%04x\n", phyStatus);
-		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
-		printf ("ievent:   0x%08x\n", fec->eth->ievent);
-		printf ("x_status: 0x%08x\n", fec->eth->x_status);
-		printf ("tfifo: status	0x%08x\n", fec->eth->tfifo_status);
-
-		printf ("	control 0x%08x\n", fec->eth->tfifo_cntrl);
-		printf ("	lrfp	0x%08x\n", fec->eth->tfifo_lrf_ptr);
-		printf ("	lwfp	0x%08x\n", fec->eth->tfifo_lwf_ptr);
-		printf ("	alarm	0x%08x\n", fec->eth->tfifo_alarm);
-		printf ("	readptr 0x%08x\n", fec->eth->tfifo_rdptr);
-		printf ("	writptr 0x%08x\n", fec->eth->tfifo_wrptr);
-	}
-}
-
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
-	u16 phyAddr = CONFIG_PHY_ADDR;
-	u16 phyStatus;
-
-	if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
-	    || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
-
-		miiphy_read (devname, phyAddr, 0x1, &phyStatus);
-		printf ("\nphyStatus: 0x%04x\n", phyStatus);
-		printf ("ecntrl:   0x%08x\n", fec->eth->ecntrl);
-		printf ("ievent:   0x%08x\n", fec->eth->ievent);
-		printf ("x_status: 0x%08x\n", fec->eth->x_status);
-		printf ("rfifo: status	0x%08x\n", fec->eth->rfifo_status);
-
-		printf ("	control 0x%08x\n", fec->eth->rfifo_cntrl);
-		printf ("	lrfp	0x%08x\n", fec->eth->rfifo_lrf_ptr);
-		printf ("	lwfp	0x%08x\n", fec->eth->rfifo_lwf_ptr);
-		printf ("	alarm	0x%08x\n", fec->eth->rfifo_alarm);
-		printf ("	readptr 0x%08x\n", fec->eth->rfifo_rdptr);
-		printf ("	writptr 0x%08x\n", fec->eth->rfifo_wrptr);
-	}
-}
-#endif /* DEBUG */
-
-/********************************************************************/
-
-static int mpc8220_fec_send(struct eth_device *dev, void *eth_data,
-			     int data_length)
-{
-	/*
-	 * This routine transmits one frame.  This routine only accepts
-	 * 6-byte Ethernet addresses.
-	 */
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	FEC_TBD *pTbd;
-
-#ifdef DEBUG
-	printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
-	tfifo_print (dev->name, fec);
-#endif
-
-	/*
-	 * Clear Tx BD ring at first
-	 */
-	mpc8220_fec_tbd_scrub (fec);
-
-	/*
-	 * Check for valid length of data.
-	 */
-	if ((data_length > 1500) || (data_length <= 0)) {
-		return -1;
-	}
-
-	/*
-	 * Check the number of vacant TxBDs.
-	 */
-	if (fec->cleanTbdNum < 1) {
-#ifdef DEBUG
-		printf ("No available TxBDs ...\n");
-#endif
-		return -1;
-	}
-
-	/*
-	 * Get the first TxBD to send the mac header
-	 */
-	pTbd = &fec->tbdBase[fec->tbdIndex];
-	pTbd->dataLength = data_length;
-	pTbd->dataPointer = (u32) eth_data;
-	pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
-	fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
-
-#ifdef DEBUG
-	printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
-#endif
-
-	/*
-	 * Kick the MII i/f
-	 */
-	if (fec->xcv_type != SEVENWIRE) {
-		u16 phyStatus;
-
-		miiphy_read (dev->name, 0, 0x1, &phyStatus);
-	}
-
-	/*
-	 * Enable SmartDMA transmit task
-	 */
-
-#ifdef DEBUG
-	tfifo_print (dev->name, fec);
-#endif
-
-	DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
-
-#ifdef DEBUG
-	tfifo_print (dev->name, fec);
-#endif
-
-#ifdef DEBUG
-	printf ("+");
-#endif
-
-	fec->cleanTbdNum -= 1;
-
-#ifdef DEBUG
-	printf ("smartDMA ethernet Tx task enabled\n");
-#endif
-	/*
-	 * wait until frame is sent .
-	 */
-	while (pTbd->status & FEC_TBD_READY) {
-		udelay (10);
-#ifdef DEBUG
-		printf ("TDB status = %04x\n", pTbd->status);
-#endif
-	}
-
-	return 0;
-}
-
-
-/********************************************************************/
-static int mpc8220_fec_recv (struct eth_device *dev)
-{
-	/*
-	 * This command pulls one frame from the card
-	 */
-	mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
-	FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
-	unsigned long ievent;
-	int frame_length, len = 0;
-	NBUF *frame;
-
-#ifdef DEBUG
-	printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
-	printf ("-");
-#endif
-
-	/*
-	 * Check if any critical events have happened
-	 */
-	ievent = fec->eth->ievent;
-	fec->eth->ievent = ievent;
-	if (ievent & 0x20060000) {
-		/* BABT, Rx/Tx FIFO errors */
-		mpc8220_fec_halt (dev);
-		mpc8220_fec_init (dev, NULL);
-		return 0;
-	}
-	if (ievent & 0x80000000) {
-		/* Heartbeat error */
-		fec->eth->x_cntrl |= 0x00000001;
-	}
-	if (ievent & 0x10000000) {
-		/* Graceful stop complete */
-		if (fec->eth->x_cntrl & 0x00000001) {
-			mpc8220_fec_halt (dev);
-			fec->eth->x_cntrl &= ~0x00000001;
-			mpc8220_fec_init (dev, NULL);
-		}
-	}
-
-	if (!(pRbd->status & FEC_RBD_EMPTY)) {
-		if ((pRbd->status & FEC_RBD_LAST)
-		    && !(pRbd->status & FEC_RBD_ERR)
-		    && ((pRbd->dataLength - 4) > 14)) {
-
-			/*
-			 * Get buffer address and size
-			 */
-			frame = (NBUF *) pRbd->dataPointer;
-			frame_length = pRbd->dataLength - 4;
-
-			/* DEBUG code */
-			if (_DEBUG) {
-				int i;
-
-				printf ("recv data hdr:");
-				for (i = 0; i < 14; i++)
-					printf ("%x ", *(frame->head + i));
-				printf ("\n");
-			}
-
-			/*
-			 *  Fill the buffer and pass it to upper layers
-			 */
-/*			memcpy(buff, frame->head, 14);
-			memcpy(buff + 14, frame->data, frame_length);*/
-			NetReceive((uchar *)pRbd->dataPointer, frame_length);
-			len = frame_length;
-		}
-		/*
-		 * Reset buffer descriptor as empty
-		 */
-		mpc8220_fec_rbd_clean (fec, pRbd);
-	}
-	DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
-	return len;
-}
-
-
-/********************************************************************/
-int mpc8220_fec_initialize (bd_t * bis)
-{
-	mpc8220_fec_priv *fec;
-
-#ifdef CONFIG_HAS_ETH1
-	mpc8220_fec_priv *fec2;
-#endif
-	struct eth_device *dev;
-	char *tmp, *end;
-	char env_enetaddr[6];
-
-#ifdef CONFIG_HAS_ETH1
-	char env_enet1addr[6];
-#endif
-	int i;
-
-	fec = (mpc8220_fec_priv *) malloc (sizeof (*fec));
-	dev = (struct eth_device *) malloc (sizeof (*dev));
-	memset (dev, 0, sizeof *dev);
-
-	fec->eth = (ethernet_regs *) MMAP_FEC1;
-#ifdef CONFIG_HAS_ETH1
-	fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
-	fec2->eth = (ethernet_regs *) MMAP_FEC2;
-#endif
-	fec->tbdBase = (FEC_TBD *) FEC_BD_BASE;
-	fec->rbdBase =
-		(FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD));
-	fec->xcv_type = MII100;
-
-	dev->priv = (void *) fec;
-	dev->iobase = MMAP_FEC1;
-	dev->init = mpc8220_fec_init;
-	dev->halt = mpc8220_fec_halt;
-	dev->send = mpc8220_fec_send;
-	dev->recv = mpc8220_fec_recv;
-
-	sprintf (dev->name, "FEC");
-	eth_register (dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-	miiphy_register (dev->name,
-			fec8220_miiphy_read, fec8220_miiphy_write);
-#endif
-
-	/*
-	 * Try to set the mac address now. The fec mac address is
-	 * a garbage after reset. When not using fec for booting
-	 * the Linux fec driver will try to work with this garbage.
-	 */
-	tmp = getenv ("ethaddr");
-	if (tmp) {
-		for (i = 0; i < 6; i++) {
-			env_enetaddr[i] =
-				tmp ? simple_strtoul (tmp, &end, 16) : 0;
-			if (tmp)
-				tmp = (*end) ? end + 1 : end;
-		}
-		mpc8220_fec_set_hwaddr (fec, env_enetaddr);
-	}
-#ifdef CONFIG_HAS_ETH1
-	tmp = getenv ("eth1addr");
-	if (tmp) {
-		for (i = 0; i < 6; i++) {
-			env_enet1addr[i] =
-				tmp ? simple_strtoul (tmp, &end, 16) : 0;
-			if (tmp)
-				tmp = (*end) ? end + 1 : end;
-		}
-		mpc8220_fec_set_hwaddr (fec2, env_enet1addr);
-	}
-#endif
-
-	return 1;
-}
-
-/* MII-interface related functions */
-/********************************************************************/
-int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal)
-{
-	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
-	u32 reg;		/* convenient holder for the PHY register */
-	u32 phy;		/* convenient holder for the PHY */
-	int timeout = 0xffff;
-
-	/*
-	 * reading from any PHY's register is done by properly
-	 * programming the FEC's MII data register.
-	 */
-	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
-	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
-	eth->mii_data =
-		(FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy
-		 | reg);
-
-	/*
-	 * wait for the related interrupt
-	 */
-	while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
-	if (timeout == 0) {
-#ifdef DEBUG
-		printf ("Read MDIO failed...\n");
-#endif
-		return -1;
-	}
-
-	/*
-	 * clear mii interrupt bit
-	 */
-	eth->ievent = 0x00800000;
-
-	/*
-	 * it's now safe to read the PHY's register
-	 */
-	*retVal = (u16) eth->mii_data;
-
-	return 0;
-}
-
-/********************************************************************/
-int fec8220_miiphy_write(const char *devname, u8 phyAddr, u8 regAddr, u16 data)
-{
-	ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
-	u32 reg;		/* convenient holder for the PHY register */
-	u32 phy;		/* convenient holder for the PHY */
-	int timeout = 0xffff;
-
-	reg = regAddr << FEC_MII_DATA_RA_SHIFT;
-	phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
-	eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
-			 FEC_MII_DATA_TA | phy | reg | data);
-
-	/*
-	 * wait for the MII interrupt
-	 */
-	while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
-	if (timeout == 0) {
-#ifdef DEBUG
-		printf ("Write MDIO failed...\n");
-#endif
-		return -1;
-	}
-
-	/*
-	 * clear MII interrupt bit
-	 */
-	eth->ievent = 0x00800000;
-
-	return 0;
-}
-
-#endif /* CONFIG_MPC8220_FEC */
diff --git a/arch/powerpc/cpu/mpc8220/fec.h b/arch/powerpc/cpu/mpc8220/fec.h
deleted file mode 100644
index a8927fcdbb2..00000000000
--- a/arch/powerpc/cpu/mpc8220/fec.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.h
- * (C) Copyright Motorola, Inc., 2000
- *
- * odin ethernet header file
- */
-
-#ifndef __MPC8220_FEC_H
-#define __MPC8220_FEC_H
-
-#include <common.h>
-#include <mpc8220.h>
-#include "dma.h"
-
-typedef struct ethernet_register_set {
-
-/* [10:2]addr = 00 */
-
-/*  Control and status Registers (offset 000-1FF) */
-
-	volatile u32 fec_id;		/* MBAR_ETH + 0x000 */
-	volatile u32 ievent;		/* MBAR_ETH + 0x004 */
-	volatile u32 imask;		/* MBAR_ETH + 0x008 */
-
-	volatile u32 RES0[1];		/* MBAR_ETH + 0x00C */
-	volatile u32 r_des_active;	/* MBAR_ETH + 0x010 */
-	volatile u32 x_des_active;	/* MBAR_ETH + 0x014 */
-	volatile u32 r_des_active_cl;	/* MBAR_ETH + 0x018 */
-	volatile u32 x_des_active_cl;	/* MBAR_ETH + 0x01C */
-	volatile u32 ivent_set;		/* MBAR_ETH + 0x020 */
-	volatile u32 ecntrl;		/* MBAR_ETH + 0x024 */
-
-	volatile u32 RES1[6];		/* MBAR_ETH + 0x028-03C */
-	volatile u32 mii_data;		/* MBAR_ETH + 0x040 */
-	volatile u32 mii_speed;		/* MBAR_ETH + 0x044 */
-	volatile u32 mii_status;	/* MBAR_ETH + 0x048 */
-
-	volatile u32 RES2[5];		/* MBAR_ETH + 0x04C-05C */
-	volatile u32 mib_data;		/* MBAR_ETH + 0x060 */
-	volatile u32 mib_control;	/* MBAR_ETH + 0x064 */
-
-	volatile u32 RES3[6];		/* MBAR_ETH + 0x068-7C */
-	volatile u32 r_activate;	/* MBAR_ETH + 0x080 */
-	volatile u32 r_cntrl;		/* MBAR_ETH + 0x084 */
-	volatile u32 r_hash;		/* MBAR_ETH + 0x088 */
-	volatile u32 r_data;		/* MBAR_ETH + 0x08C */
-	volatile u32 ar_done;		/* MBAR_ETH + 0x090 */
-	volatile u32 r_test;		/* MBAR_ETH + 0x094 */
-	volatile u32 r_mib;		/* MBAR_ETH + 0x098 */
-	volatile u32 r_da_low;		/* MBAR_ETH + 0x09C */
-	volatile u32 r_da_high;		/* MBAR_ETH + 0x0A0 */
-
-	volatile u32 RES4[7];		/* MBAR_ETH + 0x0A4-0BC */
-	volatile u32 x_activate;	/* MBAR_ETH + 0x0C0 */
-	volatile u32 x_cntrl;		/* MBAR_ETH + 0x0C4 */
-	volatile u32 backoff;		/* MBAR_ETH + 0x0C8 */
-	volatile u32 x_data;		/* MBAR_ETH + 0x0CC */
-	volatile u32 x_status;		/* MBAR_ETH + 0x0D0 */
-	volatile u32 x_mib;		/* MBAR_ETH + 0x0D4 */
-	volatile u32 x_test;		/* MBAR_ETH + 0x0D8 */
-	volatile u32 fdxfc_da1;		/* MBAR_ETH + 0x0DC */
-	volatile u32 fdxfc_da2;		/* MBAR_ETH + 0x0E0 */
-	volatile u32 paddr1;		/* MBAR_ETH + 0x0E4 */
-	volatile u32 paddr2;		/* MBAR_ETH + 0x0E8 */
-	volatile u32 op_pause;		/* MBAR_ETH + 0x0EC */
-
-	volatile u32 RES5[4];		/* MBAR_ETH + 0x0F0-0FC */
-	volatile u32 instr_reg;		/* MBAR_ETH + 0x100 */
-	volatile u32 context_reg;	/* MBAR_ETH + 0x104 */
-	volatile u32 test_cntrl;	/* MBAR_ETH + 0x108 */
-	volatile u32 acc_reg;		/* MBAR_ETH + 0x10C */
-	volatile u32 ones;		/* MBAR_ETH + 0x110 */
-	volatile u32 zeros;		/* MBAR_ETH + 0x114 */
-	volatile u32 iaddr1;		/* MBAR_ETH + 0x118 */
-	volatile u32 iaddr2;		/* MBAR_ETH + 0x11C */
-	volatile u32 gaddr1;		/* MBAR_ETH + 0x120 */
-	volatile u32 gaddr2;		/* MBAR_ETH + 0x124 */
-	volatile u32 random;		/* MBAR_ETH + 0x128 */
-	volatile u32 rand1;		/* MBAR_ETH + 0x12C */
-	volatile u32 tmp;		/* MBAR_ETH + 0x130 */
-
-	volatile u32 RES6[3];		/* MBAR_ETH + 0x134-13C */
-	volatile u32 fifo_id;		/* MBAR_ETH + 0x140 */
-	volatile u32 x_wmrk;		/* MBAR_ETH + 0x144 */
-	volatile u32 fcntrl;		/* MBAR_ETH + 0x148 */
-	volatile u32 r_bound;		/* MBAR_ETH + 0x14C */
-	volatile u32 r_fstart;		/* MBAR_ETH + 0x150 */
-	volatile u32 r_count;		/* MBAR_ETH + 0x154 */
-	volatile u32 r_lag;		/* MBAR_ETH + 0x158 */
-	volatile u32 r_read;		/* MBAR_ETH + 0x15C */
-	volatile u32 r_write;		/* MBAR_ETH + 0x160 */
-	volatile u32 x_count;		/* MBAR_ETH + 0x164 */
-	volatile u32 x_lag;		/* MBAR_ETH + 0x168 */
-	volatile u32 x_retry;		/* MBAR_ETH + 0x16C */
-	volatile u32 x_write;		/* MBAR_ETH + 0x170 */
-	volatile u32 x_read;		/* MBAR_ETH + 0x174 */
-
-	volatile u32 RES7[2];		/* MBAR_ETH + 0x178-17C */
-	volatile u32 fm_cntrl;		/* MBAR_ETH + 0x180 */
-	volatile u32 rfifo_data;	/* MBAR_ETH + 0x184 */
-	volatile u32 rfifo_status;	/* MBAR_ETH + 0x188 */
-	volatile u32 rfifo_cntrl;	/* MBAR_ETH + 0x18C */
-	volatile u32 rfifo_lrf_ptr;	/* MBAR_ETH + 0x190 */
-	volatile u32 rfifo_lwf_ptr;	/* MBAR_ETH + 0x194 */
-	volatile u32 rfifo_alarm;	/* MBAR_ETH + 0x198 */
-	volatile u32 rfifo_rdptr;	/* MBAR_ETH + 0x19C */
-	volatile u32 rfifo_wrptr;	/* MBAR_ETH + 0x1A0 */
-	volatile u32 tfifo_data;	/* MBAR_ETH + 0x1A4 */
-	volatile u32 tfifo_status;	/* MBAR_ETH + 0x1A8 */
-	volatile u32 tfifo_cntrl;	/* MBAR_ETH + 0x1AC */
-	volatile u32 tfifo_lrf_ptr;	/* MBAR_ETH + 0x1B0 */
-	volatile u32 tfifo_lwf_ptr;	/* MBAR_ETH + 0x1B4 */
-	volatile u32 tfifo_alarm;	/* MBAR_ETH + 0x1B8 */
-	volatile u32 tfifo_rdptr;	/* MBAR_ETH + 0x1BC */
-	volatile u32 tfifo_wrptr;	/* MBAR_ETH + 0x1C0 */
-
-	volatile u32 reset_cntrl;	/* MBAR_ETH + 0x1C4 */
-	volatile u32 xmit_fsm;		/* MBAR_ETH + 0x1C8 */
-
-	volatile u32 RES8[3];		/* MBAR_ETH + 0x1CC-1D4 */
-	volatile u32 rdes_data0;	/* MBAR_ETH + 0x1D8 */
-	volatile u32 rdes_data1;	/* MBAR_ETH + 0x1DC */
-	volatile u32 r_length;		/* MBAR_ETH + 0x1E0 */
-	volatile u32 x_length;		/* MBAR_ETH + 0x1E4 */
-	volatile u32 x_addr;		/* MBAR_ETH + 0x1E8 */
-	volatile u32 cdes_data;		/* MBAR_ETH + 0x1EC */
-	volatile u32 status;		/* MBAR_ETH + 0x1F0 */
-	volatile u32 dma_control;	/* MBAR_ETH + 0x1F4 */
-	volatile u32 des_cmnd;		/* MBAR_ETH + 0x1F8 */
-	volatile u32 data;		/* MBAR_ETH + 0x1FC */
-
-	/*  MIB COUNTERS (Offset 200-2FF) */
-
-	volatile u32 rmon_t_drop;	/* MBAR_ETH + 0x200 */
-	volatile u32 rmon_t_packets;	/* MBAR_ETH + 0x204 */
-	volatile u32 rmon_t_bc_pkt;	/* MBAR_ETH + 0x208 */
-	volatile u32 rmon_t_mc_pkt;	/* MBAR_ETH + 0x20C */
-	volatile u32 rmon_t_crc_align;	/* MBAR_ETH + 0x210 */
-	volatile u32 rmon_t_undersize;	/* MBAR_ETH + 0x214 */
-	volatile u32 rmon_t_oversize;	/* MBAR_ETH + 0x218 */
-	volatile u32 rmon_t_frag;	/* MBAR_ETH + 0x21C */
-	volatile u32 rmon_t_jab;	/* MBAR_ETH + 0x220 */
-	volatile u32 rmon_t_col;	/* MBAR_ETH + 0x224 */
-	volatile u32 rmon_t_p64;	/* MBAR_ETH + 0x228 */
-	volatile u32 rmon_t_p65to127;	/* MBAR_ETH + 0x22C */
-	volatile u32 rmon_t_p128to255;	/* MBAR_ETH + 0x230 */
-	volatile u32 rmon_t_p256to511;	/* MBAR_ETH + 0x234 */
-	volatile u32 rmon_t_p512to1023;	/* MBAR_ETH + 0x238 */
-	volatile u32 rmon_t_p1024to2047;/* MBAR_ETH + 0x23C */
-	volatile u32 rmon_t_p_gte2048;	/* MBAR_ETH + 0x240 */
-	volatile u32 rmon_t_octets;	/* MBAR_ETH + 0x244 */
-	volatile u32 ieee_t_drop;	/* MBAR_ETH + 0x248 */
-	volatile u32 ieee_t_frame_ok;	/* MBAR_ETH + 0x24C */
-	volatile u32 ieee_t_1col;	/* MBAR_ETH + 0x250 */
-	volatile u32 ieee_t_mcol;	/* MBAR_ETH + 0x254 */
-	volatile u32 ieee_t_def;	/* MBAR_ETH + 0x258 */
-	volatile u32 ieee_t_lcol;	/* MBAR_ETH + 0x25C */
-	volatile u32 ieee_t_excol;	/* MBAR_ETH + 0x260 */
-	volatile u32 ieee_t_macerr;	/* MBAR_ETH + 0x264 */
-	volatile u32 ieee_t_cserr;	/* MBAR_ETH + 0x268 */
-	volatile u32 ieee_t_sqe;	/* MBAR_ETH + 0x26C */
-	volatile u32 t_fdxfc;		/* MBAR_ETH + 0x270 */
-	volatile u32 ieee_t_octets_ok;	/* MBAR_ETH + 0x274 */
-
-	volatile u32 RES9[2];		/* MBAR_ETH + 0x278-27C */
-	volatile u32 rmon_r_drop;	/* MBAR_ETH + 0x280 */
-	volatile u32 rmon_r_packets;	/* MBAR_ETH + 0x284 */
-	volatile u32 rmon_r_bc_pkt;	/* MBAR_ETH + 0x288 */
-	volatile u32 rmon_r_mc_pkt;	/* MBAR_ETH + 0x28C */
-	volatile u32 rmon_r_crc_align;	/* MBAR_ETH + 0x290 */
-	volatile u32 rmon_r_undersize;	/* MBAR_ETH + 0x294 */
-	volatile u32 rmon_r_oversize;	/* MBAR_ETH + 0x298 */
-	volatile u32 rmon_r_frag;	/* MBAR_ETH + 0x29C */
-	volatile u32 rmon_r_jab;	/* MBAR_ETH + 0x2A0 */
-
-	volatile u32 rmon_r_resvd_0;	/* MBAR_ETH + 0x2A4 */
-
-	volatile u32 rmon_r_p64;	/* MBAR_ETH + 0x2A8 */
-	volatile u32 rmon_r_p65to127;	/* MBAR_ETH + 0x2AC */
-	volatile u32 rmon_r_p128to255;	/* MBAR_ETH + 0x2B0 */
-	volatile u32 rmon_r_p256to511;	/* MBAR_ETH + 0x2B4 */
-	volatile u32 rmon_r_p512to1023;	/* MBAR_ETH + 0x2B8 */
-	volatile u32 rmon_r_p1024to2047;/* MBAR_ETH + 0x2BC */
-	volatile u32 rmon_r_p_gte2048;	/* MBAR_ETH + 0x2C0 */
-	volatile u32 rmon_r_octets;	/* MBAR_ETH + 0x2C4 */
-	volatile u32 ieee_r_drop;	/* MBAR_ETH + 0x2C8 */
-	volatile u32 ieee_r_frame_ok;	/* MBAR_ETH + 0x2CC */
-	volatile u32 ieee_r_crc;	/* MBAR_ETH + 0x2D0 */
-	volatile u32 ieee_r_align;	/* MBAR_ETH + 0x2D4 */
-	volatile u32 r_macerr;		/* MBAR_ETH + 0x2D8 */
-	volatile u32 r_fdxfc;		/* MBAR_ETH + 0x2DC */
-	volatile u32 ieee_r_octets_ok;	/* MBAR_ETH + 0x2E0 */
-
-	volatile u32 RES10[6];		/* MBAR_ETH + 0x2E4-2FC */
-
-	volatile u32 RES11[64];		/* MBAR_ETH + 0x300-3FF */
-} ethernet_regs;
-
-/* Receive & Transmit Buffer Descriptor definitions */
-typedef struct BufferDescriptor {
-	u16 status;
-	u16 dataLength;
-	u32 dataPointer;
-} FEC_RBD;
-
-typedef struct {
-	u16 status;
-	u16 dataLength;
-	u32 dataPointer;
-} FEC_TBD;
-
-/* private structure */
-typedef enum {
-	SEVENWIRE,		/* 7-wire       */
-	MII10,			/* MII 10Mbps   */
-	MII100			/* MII 100Mbps  */
-} xceiver_type;
-
-typedef struct {
-	ethernet_regs *eth;
-	xceiver_type xcv_type;	/* transceiver type */
-	FEC_RBD *rbdBase;	/* RBD ring */
-	FEC_TBD *tbdBase;	/* TBD ring */
-	u16 rbdIndex;		/* next receive BD to read */
-	u16 tbdIndex;		/* next transmit BD to send */
-	u16 usedTbdIndex;	/* next transmit BD to clean */
-	u16 cleanTbdNum;	/* the number of available transmit BDs */
-} mpc8220_fec_priv;
-
-/* Ethernet parameter area */
-#define FEC_TBD_BASE	    (FEC_PARAM_BASE + 0x00)
-#define FEC_TBD_NEXT	    (FEC_PARAM_BASE + 0x04)
-#define FEC_RBD_BASE	    (FEC_PARAM_BASE + 0x08)
-#define FEC_RBD_NEXT	    (FEC_PARAM_BASE + 0x0c)
-
-/* BD Numer definitions */
-#define FEC_TBD_NUM	   48	/* The user can adjust this value */
-#define FEC_RBD_NUM	   32	/* The user can adjust this value */
-
-/* packet size limit */
-#define FEC_MAX_PKT_SIZE   1536
-
-/* RBD bits definitions */
-#define FEC_RBD_EMPTY	0x8000	/* Buffer is empty */
-#define FEC_RBD_WRAP	0x2000	/* Last BD in ring */
-#define FEC_RBD_INT	0x1000	/* Interrupt */
-#define FEC_RBD_LAST	0x0800	/* Buffer is last in frame(useless) */
-#define FEC_RBD_MISS	0x0100	/* Miss bit for prom mode */
-#define FEC_RBD_BC	0x0080	/* The received frame is broadcast frame */
-#define FEC_RBD_MC	0x0040	/* The received frame is multicast frame */
-#define FEC_RBD_LG	0x0020	/* Frame length violation */
-#define FEC_RBD_NO	0x0010	/* Nonoctet align frame */
-#define FEC_RBD_SH	0x0008	/* Short frame */
-#define FEC_RBD_CR	0x0004	/* CRC error */
-#define FEC_RBD_OV	0x0002	/* Receive FIFO overrun */
-#define FEC_RBD_TR	0x0001	/* Frame is truncated */
-#define FEC_RBD_ERR	(FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
-			 FEC_RBD_OV | FEC_RBD_TR)
-
-/* TBD bits definitions */
-#define FEC_TBD_READY	0x8000	/* Buffer is ready */
-#define FEC_TBD_WRAP	0x2000	/* Last BD in ring */
-#define FEC_TBD_INT	0x1000	/* Interrupt */
-#define FEC_TBD_LAST	0x0800	/* Buffer is last in frame */
-#define FEC_TBD_TC	0x0400	/* Transmit the CRC */
-#define FEC_TBD_ABC	0x0200	/* Append bad CRC */
-
-/* MII-related definitios */
-#define FEC_MII_DATA_ST		0x40000000	/* Start of frame delimiter */
-#define FEC_MII_DATA_OP_RD	0x20000000	/* Perform a read operation */
-#define FEC_MII_DATA_OP_WR	0x10000000	/* Perform a write operation */
-#define FEC_MII_DATA_PA_MSK	0x0f800000	/* PHY Address field mask */
-#define FEC_MII_DATA_RA_MSK	0x007c0000	/* PHY Register field mask */
-#define FEC_MII_DATA_TA		0x00020000	/* Turnaround */
-#define FEC_MII_DATA_DATAMSK	0x0000ffff	/* PHY data field */
-
-#define FEC_MII_DATA_RA_SHIFT	18	/* MII Register address bits */
-#define FEC_MII_DATA_PA_SHIFT	23	/* MII PHY address bits */
-
-#endif /* __MPC8220_FEC_H */
diff --git a/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S b/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S
deleted file mode 100644
index 3f8a03bf157..00000000000
--- a/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2004, Freescale Semiconductor, Inc.
- *
- * This file contains microcode for the FEC controller of the MPC8220.
- */
-
-#include <config.h>
-
-#if defined(CONFIG_MPC8220)
-
-/* sas/sccg, gas target */
-.section        smartdmaInitData,"aw",@progbits	/* Initialized data for task variables */
-.section        smartdmaTaskTable,"aw",@progbits	/* Task tables */
-.align  9
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry:		/* Task 0 */
-.long   scEthernetRecv_TDT - taskTable	/* Task 0 Descriptor Table */
-.long   scEthernetRecv_TDT - taskTable + 0x00000094
-.long   scEthernetRecv_VarTab - taskTable	/* Task 0 Variable Table */
-.long   scEthernetRecv_FDT - taskTable + 0x03	/* Task 0 Function Descriptor Table & Flags */
-.long   0x00000000
-.long   0x00000000
-.long   scEthernetRecv_CSave - taskTable	/* Task 0 context save space */
-.long   0xf0000000
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry:		/* Task 1 */
-.long   scEthernetXmit_TDT - taskTable	/* Task 1 Descriptor Table */
-.long   scEthernetXmit_TDT - taskTable + 0x000000e0
-.long   scEthernetXmit_VarTab - taskTable	/* Task 1 Variable Table */
-.long   scEthernetXmit_FDT - taskTable + 0x03	/* Task 1 Function Descriptor Table & Flags */
-.long   0x00000000
-.long   0x00000000
-.long   scEthernetXmit_CSave - taskTable	/* Task 1 context save space */
-.long   0xf0000000
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT:	/* Task 0 Descriptor Table */
-.long   0xc4c50000	/* 0000(153):  LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long   0x84c5e000	/* 0004(153):  LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long   0x10001f08	/* 0008(156):    DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x10000380	/* 000C(157):    DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x00000f88	/* 0010(158):    DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long   0x81980000	/* 0014(162):  LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long   0x10000780	/* 0018(164):    DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x60000000	/* 001C(165):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long   0x010cf04c	/* 0020(165):    DRD2B1: var4 = EU3(); EU3(var1,var12)  */
-.long   0x82180349	/* 0024(169):  LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long   0x81c68004	/* 0028(172):    LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long   0x70000000	/* 002C(174):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long   0x018cf04e	/* 0030(174):      DRD2B1: var6 = EU3(); EU3(var1,var14)  */
-.long   0x70000000	/* 0034(175):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long   0x020cf04f	/* 0038(175):      DRD2B1: var8 = EU3(); EU3(var1,var15)  */
-.long   0x00000b88	/* 003C(176):      DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long   0x80025184	/* 0040(205):    LCDEXT: idx1 = 0xf0009184; ; */
-.long   0x86810412	/* 0044(205):    LCD: idx2 = var13, idx3 = var2; idx2 < var16; idx2 += inc2, idx3 += inc2 */
-.long   0x0200cf88	/* 0048(209):      DRD1A: *idx3 = *idx1; FN=0 init=16 WS=0 RS=0 */
-.long   0x80025184	/* 004C(217):    LCDEXT: idx1 = 0xf0009184; ; */
-.long   0x8681845b	/* 0050(217):    LCD: idx2 = var13, idx3 = var3; idx2 < var17; idx2 += inc3, idx3 += inc3 */
-.long   0x0000cf88	/* 0054(221):      DRD1A: *idx3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long   0xc31883a4	/* 0058(225):    LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc4 */
-.long   0x80190000	/* 005C(225):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long   0x04008468	/* 0060(227):      DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long   0xc4038360	/* 0064(232):    LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc4, idx2 += inc0 */
-.long   0x81c50000	/* 0068(233):    LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long   0x1000cb18	/* 006C(235):      DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x00000f18	/* 0070(236):      DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long   0xc418836d	/* 0074(238):    LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc5 */
-.long   0x83990000	/* 0078(238):    LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long   0x10000c00	/* 007C(240):      DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x0000c800	/* 0080(241):      DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long   0x81988000	/* 0084(245):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long   0x10000788	/* 0088(247):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x60000000	/* 008C(248):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long   0x080cf04c	/* 0090(248):      DRD2B1: idx0 = EU3(); EU3(var1,var12)  */
-.long   0x000001f8	/* 0094(:0):    NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT:	/* Task 1 Descriptor Table */
-.long   0x80095b00	/* 0000(280):  LCDEXT: idx0 = 0xf0025b00; ; */
-.long   0x85c60004	/* 0004(280):  LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long   0x10002308	/* 0008(283):    DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x10000f88	/* 000C(284):    DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x00000380	/* 0010(285):    DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long   0x81980000	/* 0014(288):  LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long   0x10000780	/* 0018(290):    DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x60000000	/* 001C(291):    DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long   0x024cf04d	/* 0020(291):    DRD2B1: var9 = EU3(); EU3(var1,var13)  */
-.long   0x84980309	/* 0024(294):  LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long   0xc0004003	/* 0028(297):    LCDEXT: idx1 = 0x00000003; ; */
-.long   0x81c60004	/* 002C(297):    LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long   0x70000000	/* 0030(299):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long   0x010cf04e	/* 0034(299):      DRD2B1: var4 = EU3(); EU3(var1,var14)  */
-.long   0x70000000	/* 0038(300):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long   0x014cf04f	/* 003C(300):      DRD2B1: var5 = EU3(); EU3(var1,var15)  */
-.long   0x70000000	/* 0040(301):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long   0x028cf050	/* 0044(301):      DRD2B1: var10 = EU3(); EU3(var1,var16)  */
-.long   0x70000000	/* 0048(302):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long   0x018cf051	/* 004C(302):      DRD2B1: var6 = EU3(); EU3(var1,var17)  */
-.long   0x10000b90	/* 0050(303):      DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x60000000	/* 0054(304):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long   0x01ccf0a1	/* 0058(304):      DRD2B1: var7 = EU3(); EU3(var2,idx1)  */
-.long   0xc2988312	/* 005C(308):    LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long   0x83490000	/* 0060(308):    LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long   0x00001b10	/* 0064(310):      DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long   0x800251a4	/* 0068(315):    LCDEXT: idx1 = 0xf00091a4; ; */
-.long   0xc30104dc	/* 006C(315):    LCDEXT: idx2 = var6, idx3 = var2; idx2 >= var19; idx2 += inc3, idx3 += inc4 */
-.long   0x839a032d	/* 0070(316):    LCD: idx4 = var7; idx4 == var12; idx4 += inc5 */
-.long   0x0220c798	/* 0074(321):      DRD1A: *idx1 = *idx3; FN=0 init=17 WS=0 RS=0 */
-.long   0x800251a4	/* 0078(329):    LCDEXT: idx1 = 0xf00091a4; ; */
-.long   0x99198337	/* 007C(329):    LCD: idx2 = idx2, idx3 = idx3; idx2 > var12; idx2 += inc6, idx3 += inc7 */
-.long   0x022ac798	/* 0080(333):      DRD1A: *idx1 = *idx3; FN=0 init=17 WS=1 RS=1 */
-.long   0x800251a4	/* 0084(350):    LCDEXT: idx1 = 0xf00091a4; ; */
-.long   0xc1430000	/* 0088(350):    LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long   0x82998312	/* 008C(351):    LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long   0x0a2ac790	/* 0090(354):      DRD1A: *idx1 = *idx2; FN=0 TFD init=17 WS=1 RS=1 */
-.long   0x81988000	/* 0094(359):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long   0x60000002	/* 0098(361):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */
-.long   0x0c4cfc4d	/* 009C(361):      DRD2B1: *idx1 = EU3(); EU3(*idx1,var13)  */
-.long   0xc21883ad	/* 00A0(365):    LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long   0x80190000	/* 00A4(365):    LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long   0x04008460	/* 00A8(367):      DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long   0xc4052305	/* 00AC(371):    LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long   0x81ca0000	/* 00B0(372):    LCD: idx3 = var3 + var20; idx3 once var0; idx3 += inc0 */
-.long   0x1000c718	/* 00B4(374):      DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x00000f18	/* 00B8(375):      DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long   0xc4188000	/* 00BC(378):    LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long   0x85190312	/* 00C0(378):    LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long   0x10000c00	/* 00C4(380):      DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x1000c400	/* 00C8(381):      DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x00008860	/* 00CC(382):      DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long   0x81988000	/* 00D0(386):    LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long   0x10000788	/* 00D4(388):      DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long   0x60000000	/* 00D8(389):      DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long   0x080cf04d	/* 00DC(389):      DRD2B1: idx0 = EU3(); EU3(var1,var13)  */
-.long   0x000001f8	/* 00E0(:0):    NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab:	/* Task 0 Variable Table */
-.long   0x00000000	/* var[0] */
-.long   0x00000000	/* var[1] */
-.long   0x00000000	/* var[2] */
-.long   0x00000000	/* var[3] */
-.long   0x00000000	/* var[4] */
-.long   0x00000000	/* var[5] */
-.long   0x00000000	/* var[6] */
-.long   0x00000000	/* var[7] */
-.long   0x00000000	/* var[8] */
-.long   0xf0025b00	/* var[9] */
-.long   0x00000008	/* var[10] */
-.long   0x0000000c	/* var[11] */
-.long   0x80000000	/* var[12] */
-.long   0x00000000	/* var[13] */
-.long   0x10000000	/* var[14] */
-.long   0x20000000	/* var[15] */
-.long   0x00000800	/* var[16] */
-.long   0x00000001	/* var[17] */
-.long   0x00000000	/* var[18] */
-.long   0x00000000	/* var[19] */
-.long   0x00000000	/* var[20] */
-.long   0x00000000	/* var[21] */
-.long   0x00000000	/* var[22] */
-.long   0x00000000	/* var[23] */
-.long   0x00000000	/* inc[0] */
-.long   0x60000000	/* inc[1] */
-.long   0x20000004	/* inc[2] */
-.long   0x20000001	/* inc[3] */
-.long   0x80000000	/* inc[4] */
-.long   0x40000000	/* inc[5] */
-.long   0x00000000	/* inc[6] */
-.long   0x00000000	/* inc[7] */
-
-.align  8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab:	/* Task 1 Variable Table */
-.long   0x00000000	/* var[0] */
-.long   0x00000000	/* var[1] */
-.long   0x00000000	/* var[2] */
-.long   0x00000000	/* var[3] */
-.long   0x00000000	/* var[4] */
-.long   0x00000000	/* var[5] */
-.long   0x00000000	/* var[6] */
-.long   0x00000000	/* var[7] */
-.long   0x00000000	/* var[8] */
-.long   0x00000000	/* var[9] */
-.long   0x00000000	/* var[10] */
-.long   0xf0025b00	/* var[11] */
-.long   0x00000000	/* var[12] */
-.long   0x80000000	/* var[13] */
-.long   0x10000000	/* var[14] */
-.long   0x08000000	/* var[15] */
-.long   0x20000000	/* var[16] */
-.long   0x0000ffff	/* var[17] */
-.long   0xffffffff	/* var[18] */
-.long   0x00000004	/* var[19] */
-.long   0x00000008	/* var[20] */
-.long   0x00000000	/* var[21] */
-.long   0x00000000	/* var[22] */
-.long   0x00000000	/* var[23] */
-.long   0x00000000	/* inc[0] */
-.long   0x60000000	/* inc[1] */
-.long   0x40000000	/* inc[2] */
-.long   0xc000fffc	/* inc[3] */
-.long   0xe0000004	/* inc[4] */
-.long   0x80000000	/* inc[5] */
-.long   0x4000ffff	/* inc[6] */
-.long   0xe0000001	/* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT:	/* Task 0 Function Descriptor Table */
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x21800000	/* and(), EU# 3 */
-.long   0x21e00000	/* or(), EU# 3 */
-.long   0x21400000	/* andn(), EU# 3 */
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT:	/* Task 1 Function Descriptor Table */
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x21800000	/* and(), EU# 3 */
-.long   0x21e00000	/* or(), EU# 3 */
-.long   0x21400000	/* andn(), EU# 3 */
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-.long   0x00000000
-
-
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave:	/* Task 0 context save space */
-.space  128, 0x0
-
-
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave:	/* Task 1 context save space */
-.space  128, 0x0
-
-#endif
diff --git a/arch/powerpc/cpu/mpc8220/i2c.c b/arch/powerpc/cpu/mpc8220/i2c.c
deleted file mode 100644
index 2f35d20c87e..00000000000
--- a/arch/powerpc/cpu/mpc8220/i2c.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <mpc8220.h>
-#include <i2c.h>
-
-typedef struct mpc8220_i2c {
-	volatile u32 adr;	/* I2Cn + 0x00 */
-	volatile u32 fdr;	/* I2Cn + 0x04 */
-	volatile u32 cr;	/* I2Cn + 0x08 */
-	volatile u32 sr;	/* I2Cn + 0x0C */
-	volatile u32 dr;	/* I2Cn + 0x10 */
-} i2c_t;
-
-/* I2Cn control register bits */
-#define I2C_EN      0x80
-#define I2C_IEN     0x40
-#define I2C_STA     0x20
-#define I2C_TX      0x10
-#define I2C_TXAK    0x08
-#define I2C_RSTA    0x04
-#define I2C_INIT_MASK   (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
-
-/* I2Cn status register bits */
-#define I2C_CF      0x80
-#define I2C_AAS     0x40
-#define I2C_BB      0x20
-#define I2C_AL      0x10
-#define I2C_SRW     0x04
-#define I2C_IF      0x02
-#define I2C_RXAK    0x01
-
-#define I2C_TIMEOUT 100
-#define I2C_RETRIES 1
-
-struct mpc8220_i2c_tap {
-	int scl2tap;
-	int tap2tap;
-};
-
-static int mpc_reg_in (volatile u32 * reg);
-static void mpc_reg_out (volatile u32 * reg, int val, int mask);
-static int wait_for_bb (void);
-static int wait_for_pin (int *status);
-static int do_address (uchar chip, char rdwr_flag);
-static int send_bytes (uchar chip, char *buf, int len);
-static int receive_bytes (uchar chip, char *buf, int len);
-static int mpc_get_fdr (int);
-
-static int mpc_reg_in (volatile u32 * reg)
-{
-	int ret;
-	ret = *reg >> 24;
-	__asm__ __volatile__ ("eieio");
-	return ret;
-}
-
-static void mpc_reg_out (volatile u32 * reg, int val, int mask)
-{
-	int tmp;
-
-	if (!mask) {
-		*reg = val << 24;
-	} else {
-		tmp = mpc_reg_in (reg);
-		*reg = ((tmp & ~mask) | (val & mask)) << 24;
-	}
-	__asm__ __volatile__ ("eieio");
-
-	return;
-}
-
-static int wait_for_bb (void)
-{
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int timeout = I2C_TIMEOUT;
-	int status;
-
-	status = mpc_reg_in (&regs->sr);
-
-	while (timeout-- && (status & I2C_BB)) {
-
-		mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
-		(void)mpc_reg_in (&regs->dr);
-		mpc_reg_out (&regs->cr, 0, I2C_STA);
-		mpc_reg_out (&regs->cr, 0, 0);
-		mpc_reg_out (&regs->cr, I2C_EN, 0);
-
-		udelay (1000);
-		status = mpc_reg_in (&regs->sr);
-	}
-
-	return (status & I2C_BB);
-}
-
-static int wait_for_pin (int *status)
-{
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int timeout = I2C_TIMEOUT;
-
-	*status = mpc_reg_in (&regs->sr);
-
-	while (timeout-- && !(*status & I2C_IF)) {
-		udelay (1000);
-		*status = mpc_reg_in (&regs->sr);
-	}
-
-	if (!(*status & I2C_IF)) {
-		return -1;
-	}
-
-	mpc_reg_out (&regs->sr, 0, I2C_IF);
-	return 0;
-}
-
-static int do_address (uchar chip, char rdwr_flag)
-{
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int status;
-
-	chip <<= 1;
-
-	if (rdwr_flag)
-		chip |= 1;
-
-	mpc_reg_out (&regs->cr, I2C_TX, I2C_TX);
-	mpc_reg_out (&regs->dr, chip, 0);
-
-	if (wait_for_pin (&status))
-		return -2;
-	if (status & I2C_RXAK)
-		return -3;
-	return 0;
-}
-
-static int send_bytes (uchar chip, char *buf, int len)
-{
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int wrcount;
-	int status;
-
-	for (wrcount = 0; wrcount < len; ++wrcount) {
-
-		mpc_reg_out (&regs->dr, buf[wrcount], 0);
-
-		if (wait_for_pin (&status))
-			break;
-
-		if (status & I2C_RXAK)
-			break;
-
-	}
-
-	return !(wrcount == len);
-	return 0;
-}
-
-static int receive_bytes (uchar chip, char *buf, int len)
-{
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int dummy = 1;
-	int rdcount = 0;
-	int status;
-	int i;
-
-	mpc_reg_out (&regs->cr, 0, I2C_TX);
-
-	for (i = 0; i < len; ++i) {
-		buf[rdcount] = mpc_reg_in (&regs->dr);
-
-		if (dummy)
-			dummy = 0;
-		else
-			rdcount++;
-
-		if (wait_for_pin (&status))
-			return -4;
-	}
-
-	mpc_reg_out (&regs->cr, I2C_TXAK, I2C_TXAK);
-	buf[rdcount++] = mpc_reg_in (&regs->dr);
-
-	if (wait_for_pin (&status))
-		return -5;
-
-	mpc_reg_out (&regs->cr, 0, I2C_TXAK);
-	return 0;
-}
-
-/**************** I2C API ****************/
-
-void i2c_init (int speed, int saddr)
-{
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-
-	mpc_reg_out (&regs->cr, 0, 0);
-	mpc_reg_out (&regs->adr, saddr << 1, 0);
-
-	/* Set clock
-	 */
-	mpc_reg_out (&regs->fdr, mpc_get_fdr (speed), 0);
-
-	/* Enable module
-	 */
-	mpc_reg_out (&regs->cr, I2C_EN, I2C_INIT_MASK);
-	mpc_reg_out (&regs->sr, 0, I2C_IF);
-	return;
-}
-
-static int mpc_get_fdr (int speed)
-{
-	static int fdr = -1;
-
-	if (fdr == -1) {
-		ulong best_speed = 0;
-		ulong divider;
-		ulong ipb, scl;
-		ulong bestmatch = 0xffffffffUL;
-		int best_i = 0, best_j = 0, i, j;
-		int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8 };
-		struct mpc8220_i2c_tap scltap[] = {
-			{4, 1},
-			{4, 2},
-			{6, 4},
-			{6, 8},
-			{14, 16},
-			{30, 32},
-			{62, 64},
-			{126, 128}
-		};
-
-		ipb = gd->bus_clk;
-		for (i = 7; i >= 0; i--) {
-			for (j = 7; j >= 0; j--) {
-				scl = 2 * (scltap[j].scl2tap +
-					   (SCL_Tap[i] -
-					    1) * scltap[j].tap2tap + 2);
-				if (ipb <= speed * scl) {
-					if ((speed * scl - ipb) < bestmatch) {
-						bestmatch = speed * scl - ipb;
-						best_i = i;
-						best_j = j;
-						best_speed = ipb / scl;
-					}
-				}
-			}
-		}
-		divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
-		if (gd->flags & GD_FLG_RELOC) {
-			fdr = divider;
-		} else {
-			printf ("%ld kHz, ", best_speed / 1000);
-			return divider;
-		}
-	}
-
-	return fdr;
-}
-
-int i2c_probe (uchar chip)
-{
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int i;
-
-	for (i = 0; i < I2C_RETRIES; i++) {
-		mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
-
-		if (!do_address (chip, 0)) {
-			mpc_reg_out (&regs->cr, 0, I2C_STA);
-			break;
-		}
-
-		mpc_reg_out (&regs->cr, 0, I2C_STA);
-		udelay (50);
-	}
-
-	return (i == I2C_RETRIES);
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
-	uchar xaddr[4];
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int ret = -1;
-
-	xaddr[0] = (addr >> 24) & 0xFF;
-	xaddr[1] = (addr >> 16) & 0xFF;
-	xaddr[2] = (addr >> 8) & 0xFF;
-	xaddr[3] = addr & 0xFF;
-
-	if (wait_for_bb ()) {
-		printf ("i2c_read: bus is busy\n");
-		goto Done;
-	}
-
-	mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
-	if (do_address (chip, 0)) {
-		printf ("i2c_read: failed to address chip\n");
-		goto Done;
-	}
-
-	if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
-		printf ("i2c_read: send_bytes failed\n");
-		goto Done;
-	}
-
-	mpc_reg_out (&regs->cr, I2C_RSTA, I2C_RSTA);
-	if (do_address (chip, 1)) {
-		printf ("i2c_read: failed to address chip\n");
-		goto Done;
-	}
-
-	if (receive_bytes (chip, (char *)buf, len)) {
-		printf ("i2c_read: receive_bytes failed\n");
-		goto Done;
-	}
-
-	ret = 0;
-      Done:
-	mpc_reg_out (&regs->cr, 0, I2C_STA);
-	return ret;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
-	uchar xaddr[4];
-	i2c_t *regs = (i2c_t *) MMAP_I2C;
-	int ret = -1;
-
-	xaddr[0] = (addr >> 24) & 0xFF;
-	xaddr[1] = (addr >> 16) & 0xFF;
-	xaddr[2] = (addr >> 8) & 0xFF;
-	xaddr[3] = addr & 0xFF;
-
-	if (wait_for_bb ()) {
-		printf ("i2c_write: bus is busy\n");
-		goto Done;
-	}
-
-	mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
-	if (do_address (chip, 0)) {
-		printf ("i2c_write: failed to address chip\n");
-		goto Done;
-	}
-
-	if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
-		printf ("i2c_write: send_bytes failed\n");
-		goto Done;
-	}
-
-	if (send_bytes (chip, (char *)buf, len)) {
-		printf ("i2c_write: send_bytes failed\n");
-		goto Done;
-	}
-
-	ret = 0;
-      Done:
-	mpc_reg_out (&regs->cr, 0, I2C_STA);
-	return ret;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/arch/powerpc/cpu/mpc8220/i2cCore.c b/arch/powerpc/cpu/mpc8220/i2cCore.c
deleted file mode 100644
index b89ad034f49..00000000000
--- a/arch/powerpc/cpu/mpc8220/i2cCore.c
+++ /dev/null
@@ -1,627 +0,0 @@
-/* I2cCore.c - MPC8220 PPC I2C Library */
-
-/* Copyright 2004      Freescale Semiconductor, Inc. */
-
-/*
-modification history
---------------------
-01c,29jun04,tcl	 1.3	removed CR. Added two bytes offset support.
-01b,19jan04,tcl	 1.2	removed i2cMsDelay and sysDecGet. renamed i2cMsDelay
-			back to sysMsDelay
-01a,19jan04,tcl	 1.1	created and seperated from i2c.c
-*/
-
-/*
-DESCRIPTION
-This file contain I2C low level handling library functions
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <vxWorks.h>
-#include <sysLib.h>
-#include <iosLib.h>
-#include <logLib.h>
-#include <tickLib.h>
-
-/* BSP Includes */
-#include "config.h"
-#include "mpc8220.h"
-#include "i2cCore.h"
-
-#ifdef DEBUG_I2CCORE
-int I2CCDbg = 0;
-#endif
-
-#define ABS(x)	((x < 0)? -x : x)
-
-char *I2CERR[16] = {
-	"Transfer in Progress\n",	/* 0 */
-	"Transfer complete\n",
-	"Not Addressed\n",		/* 2 */
-	"Addressed as a slave\n",
-	"Bus is Idle\n",		/* 4 */
-	"Bus is busy\n",
-	"Arbitration Lost\n",		/* 6 */
-	"Arbitration on Track\n",
-	"Slave receive, master writing to slave\n",	/* 8 */
-	"Slave transmit, master reading from slave\n",
-	"Interrupt is pending\n",	/* 10 */
-	"Interrupt complete\n",
-	"Acknowledge received\n",	/* 12 */
-	"No acknowledge received\n",
-	"Unknown status\n",		/* 14 */
-	"\n"
-};
-
-/******************************************************************************
- *
- * chk_status - Check I2C status bit
- *
- * RETURNS: OK, or ERROR if the bit encounter
- *
- */
-
-STATUS chk_status (PSI2C pi2c, UINT8 sta_bit, UINT8 truefalse)
-{
-	int i, status = 0;
-
-	for (i = 0; i < I2C_POLL_COUNT; i++) {
-		if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
-			return (OK);
-	}
-
-	I2CCDBG (L2, ("--- sr %x stabit %x truefalse %d\n",
-		      pi2c->sr, sta_bit, truefalse, 0, 0, 0));
-
-	if (i == I2C_POLL_COUNT) {
-		switch (sta_bit) {
-		case I2C_STA_CF:
-			status = 0;
-			break;
-		case I2C_STA_AAS:
-			status = 2;
-			break;
-		case I2C_STA_BB:
-			status = 4;
-			break;
-		case I2C_STA_AL:
-			status = 6;
-			break;
-		case I2C_STA_SRW:
-			status = 8;
-			break;
-		case I2C_STA_IF:
-			status = 10;
-			break;
-		case I2C_STA_RXAK:
-			status = 12;
-			break;
-		default:
-			status = 14;
-			break;
-		}
-
-		if (!truefalse)
-			status++;
-
-		I2CCDBG (NO, ("--- status %d\n", status, 0, 0, 0, 0, 0));
-		I2CCDBG (NO, (I2CERR[status], 0, 0, 0, 0, 0, 0));
-	}
-
-	return (ERROR);
-}
-
-/******************************************************************************
- *
- * I2C Enable - Enable the I2C Controller
- *
- */
-STATUS i2c_enable (SI2C * pi2c, PI2CSET pi2cSet)
-{
-	int fdr = pi2cSet->bit_rate;
-	UINT8 adr = pi2cSet->i2c_adr;
-
-	I2CCDBG (L2, ("i2c_enable fdr %d adr %x\n", fdr, adr, 0, 0, 0, 0));
-
-	i2c_clear (pi2c);	/* Clear FDR, ADR, SR and CR reg */
-
-	SetI2cFDR (pi2c, fdr);	/* Frequency			*/
-	pi2c->adr = adr;
-
-	pi2c->cr = I2C_CTL_EN;	/* Set Enable			*/
-
-	/*
-	   The I2C bus should be in Idle state. If the bus is busy,
-	   clear the STA bit in control register
-	 */
-	if (chk_status (pi2c, I2C_STA_BB, 0) != OK) {
-		if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
-			pi2c->cr &= ~I2C_CTL_STA;
-
-		/* Check again if it is still busy, return error if found */
-		if (chk_status (pi2c, I2C_STA_BB, 1) == OK)
-			return ERROR;
-	}
-
-	return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Disable - Disable the I2C Controller
- *
- */
-STATUS i2c_disable (PSI2C pi2c)
-{
-	i2c_clear (pi2c);
-
-	pi2c->cr &= I2C_CTL_EN; /* Disable I2c			*/
-
-	if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
-		pi2c->cr &= ~I2C_CTL_STA;
-
-	if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
-		return ERROR;
-
-	return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Clear - Clear the I2C Controller
- *
- */
-STATUS i2c_clear (PSI2C pi2c)
-{
-	pi2c->adr = 0;
-	pi2c->fdr = 0;
-	pi2c->cr = 0;
-	pi2c->sr = 0;
-
-	return (OK);
-}
-
-
-STATUS i2c_start (PSI2C pi2c, PI2CSET pi2cSet)
-{
-#ifdef TWOBYTES
-	UINT16 ByteOffset = pi2cSet->str_adr;
-#else
-	UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
-#if 1
-	UINT8 tmp = 0;
-#endif
-	UINT8 Addr = pi2cSet->slv_adr;
-
-	pi2c->cr |= I2C_CTL_STA;	/* Generate start signal	*/
-
-	if (chk_status (pi2c, I2C_STA_BB, 1) != OK)
-		return ERROR;
-
-	/* Write slave address */
-	if (i2c_writebyte (pi2c, &Addr) != OK) {
-		i2c_stop (pi2c);	/* Disable I2c			*/
-		return ERROR;
-	}
-#ifdef TWOBYTES
-#   if 0
-	/* Issue the offset to start */
-	if (i2c_write2byte (pi2c, &ByteOffset) != OK) {
-		i2c_stop (pi2c);	/* Disable I2c			*/
-		return ERROR;
-	}
-#endif
-	tmp = (ByteOffset >> 8) & 0xff;
-	if (i2c_writebyte (pi2c, &tmp) != OK) {
-		i2c_stop (pi2c);	/* Disable I2c			*/
-		return ERROR;
-	}
-	tmp = ByteOffset & 0xff;
-	if (i2c_writebyte (pi2c, &tmp) != OK) {
-		i2c_stop (pi2c);	/* Disable I2c			*/
-		return ERROR;
-	}
-#else
-	if (i2c_writebyte (pi2c, &ByteOffset) != OK) {
-		i2c_stop (pi2c);	/* Disable I2c			*/
-		return ERROR;
-	}
-#endif
-
-	return (OK);
-}
-
-STATUS i2c_stop (PSI2C pi2c)
-{
-	pi2c->cr &= ~I2C_CTL_STA;	/* Generate stop signal		*/
-	if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
-		return ERROR;
-
-	return (OK);
-}
-
-/******************************************************************************
- *
- * Read Len bytes to the location pointed to by *Data from the device
- * with address Addr.
- */
-int i2c_readblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
-	int i = 0;
-	UINT8 Tmp;
-
-/*    UINT8 ByteOffset = pi2cSet->str_adr; not used? */
-	UINT8 Addr = pi2cSet->slv_adr;
-	int Length = pi2cSet->xfer_size;
-
-	I2CCDBG (L1, ("i2c_readblock addr %x data 0x%08x len %d offset %d\n",
-		      Addr, (int) Data, Length, ByteOffset, 0, 0));
-
-	if (pi2c->sr & I2C_STA_AL) {	/* Check if Arbitration lost	*/
-		I2CCDBG (FN, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
-		pi2c->sr &= ~I2C_STA_AL;	/* Clear Arbitration status bit */
-		return ERROR;
-	}
-
-	pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack	*/
-
-	if (i2c_start (pi2c, pi2cSet) == ERROR)
-		return ERROR;
-
-	pi2c->cr |= I2C_CTL_RSTA;	/* Repeat Start */
-
-	Tmp = Addr | 1;
-
-	if (i2c_writebyte (pi2c, &Tmp) != OK) {
-		i2c_stop (pi2c);	/* Disable I2c	*/
-		return ERROR;
-	}
-
-	if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
-		return ERROR;
-
-	pi2c->cr &= ~I2C_CTL_TX;	/* Set receive mode	*/
-
-	if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
-		return ERROR;
-
-	/* Dummy Read */
-	if (i2c_readbyte (pi2c, &Tmp, &i) != OK) {
-		i2c_stop (pi2c);	/* Disable I2c	*/
-		return ERROR;
-	}
-
-	i = 0;
-	while (Length) {
-		if (Length == 2)
-			pi2c->cr |= I2C_CTL_TXAK;
-
-		if (Length == 1)
-			pi2c->cr &= ~I2C_CTL_STA;
-
-		if (i2c_readbyte (pi2c, Data, &Length) != OK) {
-			return i2c_stop (pi2c);
-		}
-		i++;
-		Length--;
-		Data++;
-	}
-
-	if (i2c_stop (pi2c) == ERROR)
-		return ERROR;
-
-	return i;
-}
-
-STATUS i2c_writeblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
-	int Length = pi2cSet->xfer_size;
-
-#ifdef TWOBYTES
-	UINT16 ByteOffset = pi2cSet->str_adr;
-#else
-	UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
-	int j, k;
-
-	I2CCDBG (L2, ("i2c_writeblock\n", 0, 0, 0, 0, 0, 0));
-
-	if (pi2c->sr & I2C_STA_AL) {
-		/* Check if arbitration lost */
-		I2CCDBG (L2, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
-		pi2c->sr &= ~I2C_STA_AL;	/* Clear the condition	*/
-		return ERROR;
-	}
-
-	pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack	*/
-
-	/* Do the not even offset first */
-	if ((ByteOffset % 8) != 0) {
-		int remain;
-
-		if (Length > 8) {
-			remain = 8 - (ByteOffset % 8);
-			Length -= remain;
-
-			pi2cSet->str_adr = ByteOffset;
-
-			if (i2c_start (pi2c, pi2cSet) == ERROR)
-				return ERROR;
-
-			for (j = ByteOffset; j < remain; j++) {
-				if (i2c_writebyte (pi2c, Data++) != OK)
-					return ERROR;
-			}
-
-			if (i2c_stop (pi2c) == ERROR)
-				return ERROR;
-
-			sysMsDelay (32);
-
-			/* Update the new ByteOffset */
-			ByteOffset += remain;
-		}
-	}
-
-	for (j = ByteOffset, k = 0; j < (Length + ByteOffset); j++) {
-		if ((j % 8) == 0) {
-			pi2cSet->str_adr = j;
-			if (i2c_start (pi2c, pi2cSet) == ERROR)
-				return ERROR;
-		}
-
-		k++;
-
-		if (i2c_writebyte (pi2c, Data++) != OK)
-			return ERROR;
-
-		if ((j == (Length - 1)) || ((k % 8) == 0)) {
-			if (i2c_stop (pi2c) == ERROR)
-				return ERROR;
-
-			sysMsDelay (50);
-		}
-
-	}
-
-	return k;
-}
-
-STATUS i2c_readbyte (SI2C * pi2c, UINT8 * readb, int *index)
-{
-	pi2c->sr &= ~I2C_STA_IF;	/* Clear Interrupt Bit	*/
-	*readb = pi2c->dr;		/* Read a byte		*/
-
-	/*
-	   Set I2C_CTRL_TXAK will cause Transfer pending and
-	   set I2C_CTRL_STA will cause Interrupt pending
-	 */
-	if (*index != 2) {
-		if (chk_status (pi2c, I2C_STA_CF, 1) != OK)	/* Transfer not complete?	*/
-			return ERROR;
-	}
-
-	if (*index != 1) {
-		if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
-			return ERROR;
-	}
-
-	return (OK);
-}
-
-
-STATUS i2c_writebyte (SI2C * pi2c, UINT8 * writeb)
-{
-	pi2c->sr &= ~I2C_STA_IF;	/* Clear Interrupt	*/
-	pi2c->dr = *writeb;		/* Write a byte		*/
-
-	if (chk_status (pi2c, I2C_STA_CF, 1) != OK)	/* Transfer not complete?	*/
-		return ERROR;
-
-	if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
-		return ERROR;
-
-	return OK;
-}
-
-STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb)
-{
-	UINT8 data;
-
-	data = (UINT8) ((*writeb >> 8) & 0xff);
-	if (i2c_writebyte (pi2c, &data) != OK)
-		return ERROR;
-	data = (UINT8) (*writeb & 0xff);
-	if (i2c_writebyte (pi2c, &data) != OK)
-		return ERROR;
-	return OK;
-}
-
-/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls
-FDR FDR scl sda scl2tap2
-510 432 tap tap tap tap scl_per	    sda_hold	I2C Freq    0	1   2	3   4	5
-000 000 9   3	4   1	28 Clocks   9 Clocks	1190 KHz    0	0   0	0   0	0
-000 001 9   3	4   2	44 Clocks   11 Clocks	758 KHz	    0	0   1	0   0	0
-000 010 9   3	6   4	80 Clocks   17 Clocks	417 KHz	    0	0   0	1   0	0
-000 011 9   3	6   8	144 Clocks  25 Clocks	231 KHz	    0	0   1	1   0	0
-000 100 9   3	14  16	288 Clocks  49 Clocks	116 KHz	    0	0   0	0   1	0
-000 101 9   3	30  32	576 Clocks  97 Clocks	58 KHz	    0	0   1	0   1	0
-000 110 9   3	62  64	1152 Clocks 193 Clocks	29 KHz	    0	0   0	1   1	0
-000 111 9   3	126 128 2304 Clocks 385 Clocks	14 KHz	    0	0   1	1   1	0
-001 000 10  3	4   1	30 Clocks   9 Clocks	1111 KHz1   0	0   0	0   0
-001 001 10  3	4   2	48 Clocks   11 Clocks	694 KHz	    1	0   1	0   0	0
-001 010 10  3	6   4	88 Clocks   17 Clocks	379 KHz	    1	0   0	1   0	0
-001 011 10  3	6   8	160 Clocks  25 Clocks	208 KHz	    1	0   1	1   0	0
-001 100 10  3	14  16	320 Clocks  49 Clocks	104 KHz	    1	0   0	0   1	0
-001 101 10  3	30  32	640 Clocks  97 Clocks	52 KHz	    1	0   1	0   1	0
-001 110 10  3	62  64	1280 Clocks 193 Clocks	26 KHz	    1	0   0	1   1	0
-001 111 10  3	126 128 2560 Clocks 385 Clocks	13 KHz	    1	0   1	1   1	0
-010 000 12  4	4   1	34 Clocks   10 Clocks	980 KHz	    0	1   0	0   0	0
-010 001 12  4	4   2	56 Clocks   13 Clocks	595 KHz	    0	1   1	0   0	0
-010 010 12  4	6   4	104 Clocks  21 Clocks	321 KHz	    0	1   0	1   0	0
-010 011 12  4	6   8	192 Clocks  33 Clocks	174 KHz	    0	1   1	1   0	0
-010 100 12  4	14  16	384 Clocks  65 Clocks	87 KHz	    0	1   0	0   1	0
-010 101 12  4	30  32	768 Clocks  129 Clocks	43 KHz	    0	1   1	0   1	0
-010 110 12  4	62  64	1536 Clocks 257 Clocks	22 KHz	    0	1   0	1   1	0
-010 111 12  4	126 128 3072 Clocks 513 Clocks	11 KHz	    0	1   1	1   1	0
-011 000 15  4	4   1	40 Clocks   10 Clocks	833 KHz	    1	1   0	0   0	0
-011 001 15  4	4   2	68 Clocks   13 Clocks	490 KHz	    1	1   1	0   0	0
-011 010 15  4	6   4	128 Clocks  21 Clocks	260 KHz	    1	1   0	1   0	0
-011 011 15  4	6   8	240 Clocks  33 Clocks	139 KHz	    1	1   1	1   0	0
-011 100 15  4	14  16	480 Clocks  65 Clocks	69 KHz	    1	1   0	0   1	0
-011 101 15  4	30  32	960 Clocks  129 Clocks	35 KHz	    1	1   1	0   1	0
-011 110 15  4	62  64	1920 Clocks 257 Clocks	17 KHz	    1	1   0	1   1	0
-011 111 15  4	126 128 3840 Clocks 513 Clocks	9 KHz	    1	1   1	1   1	0
-100 000 5   1	4   1	20 Clocks   7 Clocks	1667 KHz    0	0   0	0   0	1
-100 001 5   1	4   2	28 Clocks   7 Clocks	1190 KHz    0	0   1	0   0	1
-100 010 5   1	6   4	48 Clocks   9 Clocks	694 KHz	    0	0   0	1   0	1
-100 011 5   1	6   8	80 Clocks   9 Clocks	417 KHz	    0	0   1	1   0	1
-100 100 5   1	14  16	160 Clocks  17 Clocks	208 KHz	    0	0   0	0   1	1
-100 101 5   1	30  32	320 Clocks  33 Clocks	104 KHz	    0	0   1	0   1	1
-100 110 5   1	62  64	640 Clocks  65 Clocks	52 KHz	    0	0   0	1   1	1
-100 111 5   1	126 128 1280 Clocks 129 Clocks	26 KHz	    0	0   1	1   1	1
-101 000 6   1	4   1	22 Clocks   7 Clocks	1515 KHz    1	0   0	0   0	1
-101 001 6   1	4   2	32 Clocks   7 Clocks	1042 KHz    1	0   1	0   0	1
-101 010 6   1	6   4	56 Clocks   9 Clocks	595 KHz	    1	0   0	1   0	1
-101 011 6   1	6   8	96 Clocks   9 Clocks	347 KHz	    1	0   1	1   0	1
-101 100 6   1	14  16	192 Clocks  17 Clocks	174 KHz	    1	0   0	0   1	1
-101 101 6   1	30  32	384 Clocks  33 Clocks	87 KHz	    1	0   1	0   1	1
-101 110 6   1	62  64	768 Clocks  65 Clocks	43 KHz	    1	0   0	1   1	1
-101 111 6   1	126 128 1536 Clocks 129 Clocks	22 KHz	    1	0   1	1   1	1
-110 000 7   2	4   1	24 Clocks   8 Clocks	1389 KHz    0	1   0	0   0	1
-110 001 7   2	4   2	36 Clocks   9 Clocks	926 KHz	    0	1   1	0   0	1
-110 010 7   2	6   4	64 Clocks   13 Clocks	521 KHz	    0	1   0	1   0	1
-110 011 7   2	6   8	112 Clocks  17 Clocks	298 KHz	    0	1   1	1   0	1
-110 100 7   2	14  16	224 Clocks  33 Clocks	149 KHz	    0	1   0	0   1	1
-110 101 7   2	30  32	448 Clocks  65 Clocks	74 KHz	    0	1   1	0   1	1
-110 110 7   2	62  64	896 Clocks  129 Clocks	37 KHz	    0	1   0	1   1	1
-110 111 7   2	126 128 1792 Clocks 257 Clocks	19 KHz	    0	1   1	1   1	1
-111 000 8   2	4   1	26 Clocks   8 Clocks	1282 KHz    1	1   0	0   0	1
-111 001 8   2	4   2	40 Clocks   9 Clocks	833 KHz	    1	1   1	0   0	1
-111 010 8   2	6   4	72 Clocks   13 Clocks	463 KHz	    1	1   0	1   0	1
-111 011 8   2	6   8	128 Clocks  17 Clocks	260 KHz	    1	1   1	1   0	1
-111 100 8   2	14  16	256 Clocks  33 Clocks	130 KHz	    1	1   0	0   1	1
-111 101 8   2	30  32	512 Clocks  65 Clocks	65 KHz	    1	1   1	0   1	1
-111 110 8   2	62  64	1024 Clocks 129 Clocks	33 KHz	    1	1   0	1   1	1
-111 111 8   2	126 128 2048 Clocks 257 Clocks	16 KHz	    1	1   1	1   1	1
-*/
-STATUS SetI2cFDR (PSI2C pi2cRegs, int bitrate)
-{
-/* Constants */
-	const UINT8 div_hold[8][3] = { {9, 3}, {10, 3},
-	{12, 4}, {15, 4},
-	{5, 1}, {6, 1},
-	{7, 2}, {8, 2}
-	};
-
-	const UINT8 scl_tap[8][2] = { {4, 1}, {4, 2},
-	{6, 4}, {6, 8},
-	{14, 16}, {30, 32},
-	{62, 64}, {126, 128}
-	};
-
-	UINT8 mfdr_bits;
-
-	int i = 0;
-	int j = 0;
-
-	int Diff, min;
-	int WhichFreq, iRec, jRec;
-	int SCL_Period;
-	int SCL_Hold;
-	int I2C_Freq;
-
-	I2CCDBG (L2, ("Entering getBitRate: bitrate %d pi2cRegs 0x%08x\n",
-		      bitrate, (int) pi2cRegs, 0, 0, 0, 0));
-
-	if (bitrate < 0) {
-		I2CCDBG (NO, ("Invalid bitrate\n", 0, 0, 0, 0, 0, 0));
-		return ERROR;
-	}
-
-	/* Initialize */
-	mfdr_bits = 0;
-	min = 0x7fffffff;
-	WhichFreq = iRec = jRec = 0;
-
-	for (i = 0; i < 8; i++) {
-		for (j = 0; j < 8; j++) {
-			/* SCL Period = 2 * (scl2tap + [(SCL_Tap - 1) * tap2tap] + 2)
-			 * SCL Hold   = scl2tap + ((SDA_Tap - 1) * tap2tap) + 3
-			 * Bit Rate (I2C Freq) = System Freq / SCL Period
-			 */
-			SCL_Period =
-				2 * (scl_tap[i][0] +
-				     ((div_hold[j][0] - 1) * scl_tap[i][1]) +
-				     2);
-
-			/* Now get the I2C Freq */
-			I2C_Freq = DEV_CLOCK_FREQ / SCL_Period;
-
-			/* Take equal or slower */
-			if (I2C_Freq > bitrate)
-				continue;
-
-			/* Take the differences */
-			Diff = I2C_Freq - bitrate;
-
-			Diff = ABS (Diff);
-
-			/* Find the closer value */
-			if (Diff < min) {
-				min = Diff;
-				WhichFreq = I2C_Freq;
-				iRec = i;
-				jRec = j;
-			}
-
-			I2CCDBG (L2,
-				 ("--- (%d,%d) I2C_Freq %d minDiff %d min %d\n",
-				  i, j, I2C_Freq, Diff, min, 0));
-		}
-	}
-
-	SCL_Period =
-		2 * (scl_tap[iRec][0] +
-		     ((div_hold[jRec][0] - 1) * scl_tap[iRec][1]) + 2);
-
-	I2CCDBG (L2, ("\nmin %d WhichFreq %d iRec %d jRec %d\n",
-		      min, WhichFreq, iRec, jRec, 0, 0));
-	I2CCDBG (L2, ("--- scl2tap %d SCL_Tap %d tap2tap %d\n",
-		      scl_tap[iRec][0], div_hold[jRec][0], scl_tap[iRec][1],
-		      0, 0, 0));
-
-	/* This may no require */
-	SCL_Hold =
-		scl_tap[iRec][0] +
-		((div_hold[jRec][1] - 1) * scl_tap[iRec][1]) + 3;
-	I2CCDBG (L2,
-		 ("--- SCL_Period %d SCL_Hold %d\n", SCL_Period, SCL_Hold, 0,
-		  0, 0, 0));
-
-	I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
-	/* FDR 4,3,2 */
-	if ((iRec & 1) == 1)
-		mfdr_bits |= 0x04;	/* FDR 2 */
-	if ((iRec & 2) == 2)
-		mfdr_bits |= 0x08;	/* FDR 3 */
-	if ((iRec & 4) == 4)
-		mfdr_bits |= 0x10;	/* FDR 4 */
-	/* FDR 5,1,0 */
-	if ((jRec & 1) == 1)
-		mfdr_bits |= 0x01;	/* FDR 0 */
-	if ((jRec & 2) == 2)
-		mfdr_bits |= 0x02;	/* FDR 1 */
-	if ((jRec & 4) == 4)
-		mfdr_bits |= 0x20;	/* FDR 5 */
-
-	I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
-	pi2cRegs->fdr = mfdr_bits;
-
-	return OK;
-}
diff --git a/arch/powerpc/cpu/mpc8220/i2cCore.h b/arch/powerpc/cpu/mpc8220/i2cCore.h
deleted file mode 100644
index 72783fd48b1..00000000000
--- a/arch/powerpc/cpu/mpc8220/i2cCore.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * i2cCore.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCi2ccoreh
-#define __INCi2ccoreh
-#ifndef __ASSEMBLY__
-/* device types */
-#define I2C_DEVICE_TYPE_EEPROM 0
-#define I2C_EEPROM_ADRS 0xa0
-#define I2C_CTRL_ADRS   I2C_EEPROM_ADRS
-#define EEPROM_ADDR0    0xA2	/* on Dimm SPD eeprom */
-#define EEPROM_ADDR1    0xA4	/* on Board SPD eeprom */
-#define EEPROM_ADDR2    0xD2	/* non-standard eeprom - clock generator */
-/* Control Register */
-#define I2C_CTL_EN      0x80	/* I2C Enable                   */
-#define I2C_CTL_IEN     0x40	/* I2C Interrupt Enable         */
-#define I2C_CTL_STA     0x20	/* Master/Slave Mode select     */
-#define I2C_CTL_TX      0x10	/* Transmit/Receive Mode Select */
-#define I2C_CTL_TXAK    0x08	/* Transmit Acknowledge Enable  */
-#define I2C_CTL_RSTA    0x04	/* Repeat Start                 */
-/* Status Register */
-#define I2C_STA_CF      0x80	/* Data Transfer       */
-#define I2C_STA_AAS     0x40	/* Adressed As Slave   */
-#define I2C_STA_BB      0x20	/* Bus Busy            */
-#define I2C_STA_AL      0x10	/* Arbitration Lost    */
-#define I2C_STA_SRW     0x04	/* Slave Read/Write    */
-#define I2C_STA_IF      0x02	/* I2C Interrupt       */
-#define I2C_STA_RXAK    0x01	/* Receive Acknowledge */
-/* Interrupt Contol Register */
-#define I2C_INT_BNBE2   0x80	/* Bus Not Busy Enable 2 */
-#define I2C_INT_TE2     0x40	/* Transmit Enable 2     */
-#define I2C_INT_RE2     0x20	/* Receive Enable 2      */
-#define I2C_INT_IE2     0x10	/* Interrupt Enable 2    */
-#define I2C_INT_BNBE1   0x08	/* Bus Not Busy Enable 1 */
-#define I2C_INT_TE1     0x04	/* Transmit Enable 1     */
-#define I2C_INT_RE1     0x02	/* Receive Enable 1      */
-#define I2C_INT_IE1     0x01	/* Interrupt Enable 1    */
-#define I2C_POLL_COUNT 0x100000
-#define I2C_ENABLE      0x00000001
-#define I2C_DISABLE     0x00000002
-#define I2C_START       0x00000004
-#define I2C_REPSTART    0x00000008
-#define I2C_STOP        0x00000010
-#define I2C_BITRATE     0x00000020
-#define I2C_SLAVEADR    0x00000040
-#define I2C_STARTADR    0x00000080
-#undef TWOBYTES
-typedef struct i2c_settings {
-	/* Device settings */
-	int bit_rate;		/* Device bit rate */
-	u8 i2c_adr;		/* I2C address */
-	u8 slv_adr;		/* Slave address */
-#ifdef TWOBYTES
-	u16 str_adr;		/* Start address */
-#else
-	u8 str_adr;		/* Start address */
-#endif
-	int xfer_size;		/* Transfer Size */
-
-	int bI2c_en;		/* Enable or Disable */
-	int cmdFlag;		/* I2c Command Flags */
-} i2cset_t;
-
-/*
-int check_status(PSI2C pi2c, u8 sta_bit, u8 truefalse);
-int i2c_enable(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_disable(PSI2C pi2c);
-int i2c_start(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_stop(PSI2C pi2c);
-int i2c_clear(PSI2C pi2c);
-int i2c_readblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_writeblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_readbyte(PSI2C pi2c, u8 *readb, int *index);
-int i2c_writebyte(PSI2C pi2c, u8 *writeb);
-int SetI2cFDR( PSI2C pi2cRegs, int bitrate );
-*/
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCi2ccoreh */
diff --git a/arch/powerpc/cpu/mpc8220/interrupts.c b/arch/powerpc/cpu/mpc8220/interrupts.c
deleted file mode 100644
index 9544d85b559..00000000000
--- a/arch/powerpc/cpu/mpc8220/interrupts.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-
-int interrupt_init_cpu (ulong * decrementer_count)
-{
-	*decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
-	return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
-	puts ("external_interrupt (oops!)\n");
-}
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
-	/* nothing to do here */
-	return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-
-}
-
-void irq_free_handler (int vec)
-{
-
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[])
-{
-	puts ("IRQ related functions are unimplemented currently.\n");
-}
diff --git a/arch/powerpc/cpu/mpc8220/io.S b/arch/powerpc/cpu/mpc8220/io.S
deleted file mode 100644
index 5ecdf550a17..00000000000
--- a/arch/powerpc/cpu/mpc8220/io.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
- *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- *  Copyright (C) 2001	Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- *			Andreas Heppel <aheppel@sysgo.de>
- *  Copyright (C) 2003	Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  in8 */
-/*  Description:  Input 8 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	in8
-in8:
-	lbz	r3,0(r3)
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  in16 */
-/*  Description:  Input 16 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	in16
-in16:
-	lhz	r3,0(r3)
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  in16r */
-/*  Description:  Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
-	.globl	in16r
-in16r:
-	lhbrx	r3,0,r3
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  in32 */
-/*  Description:  Input 32 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	in32
-in32:
-	lwz	3,0(3)
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  in32r */
-/*  Description:  Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
-	.globl	in32r
-in32r:
-	lwbrx	r3,0,r3
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  out8 */
-/*  Description:  Output 8 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	out8
-out8:
-	stb	r4,0(r3)
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  out16 */
-/*  Description:  Output 16 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	out16
-out16:
-	sth	r4,0(r3)
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  out16r */
-/*  Description:  Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	out16r
-out16r:
-	sthbrx	r4,0,r3
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  out32 */
-/*  Description:  Output 32 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	out32
-out32:
-	stw	r4,0(r3)
-	sync
-	blr
-
-/* ------------------------------------------------------------------------------- */
-/*  Function:	  out32r */
-/*  Description:  Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
-	.globl	out32r
-out32r:
-	stwbrx	r4,0,r3
-	sync
-	blr
diff --git a/arch/powerpc/cpu/mpc8220/loadtask.c b/arch/powerpc/cpu/mpc8220/loadtask.c
deleted file mode 100644
index 6d8b627e8c6..00000000000
--- a/arch/powerpc/cpu/mpc8220/loadtask.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Multichannel DMA microcode */
-extern int taskTable;
-
-void loadtask (int basetask, int tasks)
-{
-	int *sram = (int *) (MMAP_SRAM + 512);
-	int *task_org = &taskTable;
-	unsigned int start, offset, end;
-	int i;
-
-#ifdef DEBUG
-	printf ("basetask = %d, tasks = %d\n", basetask, tasks);
-	printf ("task_org = 0x%08x\n", (unsigned int) task_org);
-#endif
-
-	/* setup TaskBAR register */
-	*(vu_long *) MMAP_DMA = (MMAP_SRAM + 512);
-
-	/* relocate task table entries */
-	offset = (unsigned int) sram;
-	for (i = basetask; i < basetask + tasks; i++) {
-		sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
-		sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
-		sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
-		sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
-		sram[i * 8 + 4] = task_org[i * 8 + 4];
-		sram[i * 8 + 5] = task_org[i * 8 + 5];
-		sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
-		sram[i * 8 + 7] = task_org[i * 8 + 7];
-	}
-
-	/* relocate task descriptors */
-	start = (sram[basetask * 8] - (unsigned int) sram);
-	end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int) sram);
-
-#ifdef DEBUG
-	printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
-#endif
-
-	start /= 4;
-	end /= 4;
-	for (i = start; i <= end; i++) {
-		sram[i] = task_org[i];
-	}
-
-	/* relocate variables */
-	start = (sram[basetask * 8 + 2] - (unsigned int) sram);
-	end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 -
-	       (unsigned int) sram);
-	start /= 4;
-	end /= 4;
-	for (i = start; i < end; i++) {
-		sram[i] = task_org[i];
-	}
-
-	/* relocate function decriptors */
-	start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int) sram);
-	end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 -
-	       (unsigned int) sram);
-	start /= 4;
-	end /= 4;
-	for (i = start; i < end; i++) {
-		sram[i] = task_org[i];
-	}
-
-	asm volatile ("sync");
-}
diff --git a/arch/powerpc/cpu/mpc8220/pci.c b/arch/powerpc/cpu/mpc8220/pci.c
deleted file mode 100644
index 7ef43b72cd7..00000000000
--- a/arch/powerpc/cpu/mpc8220/pci.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCI Configuration space access support for MPC8220 PCI Bridge
- */
-#include <common.h>
-#include <mpc8220.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_PCI)
-
-/* System RAM mapped over PCI */
-#define CONFIG_PCI_SYS_MEM_BUS	 CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	 CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_SIZE	 (1024 * 1024 * 1024)
-
-#define cfg_read(val, addr, type, op)		*val = op((type)(addr));
-#define cfg_write(val, addr, type, op)		op((type *)(addr), (val));
-
-#define PCI_OP(rw, size, type, op, mask)				\
-int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose,	\
-	pci_dev_t dev, int offset, type val)				\
-{									\
-	u32 addr = 0;							\
-	u16 cfg_type = 0;						\
-	addr = ((offset & 0xfc) | cfg_type | (dev)  | 0x80000000);	\
-	out_be32(hose->cfg_addr, addr);					\
-	__asm__ __volatile__("sync");					\
-	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);	\
-	out_be32(hose->cfg_addr, addr & 0x7fffffff);			\
-	__asm__ __volatile__("sync");					\
-	return 0;							\
-}
-
-PCI_OP(read, byte, u8 *, in_8, 3)
-PCI_OP(read, word, u16 *, in_le16, 2)
-PCI_OP(write, byte, u8, out_8, 3)
-PCI_OP(write, word, u16, out_le16, 2)
-PCI_OP(write, dword, u32, out_le32, 0)
-
-int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
-	int offset, u32 *val)
-{
-	u32 addr;
-	u32 tmpv;
-	u32 mask = 2;	 /* word access */
-	/* Read lower 16 bits */
-	addr = ((offset & 0xfc) | (dev) | 0x80000000);
-	out_be32(hose->cfg_addr, addr);
-	__asm__ __volatile__("sync");
-	*val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
-	out_be32(hose->cfg_addr, addr & 0x7fffffff);
-	__asm__ __volatile__("sync");
-
-	/* Read upper 16 bits */
-	offset += 2;
-	addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
-	out_be32(hose->cfg_addr, addr);
-	__asm__ __volatile__("sync");
-	tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
-	out_be32(hose->cfg_addr, addr & 0x7fffffff);
-	__asm__ __volatile__("sync");
-
-	/* combine results into dword value */
-	*val = (tmpv << 16) | *val;
-
-	return 0;
-}
-
-void
-pci_mpc8220_init(struct pci_controller *hose)
-{
-	u32 win0, win1, win2;
-	volatile mpc8220_xcpci_t *xcpci =
-		(volatile mpc8220_xcpci_t *) MMAP_XCPCI;
-
-	volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
-
-	win0 = (u32) CONFIG_PCI_MEM_PHYS;
-	win1 = (u32) CONFIG_PCI_IO_PHYS;
-	win2 = (u32) CONFIG_PCI_CFG_PHYS;
-
-	/* Assert PCI reset */
-	out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR);
-
-	/* Disable prefetching but read-multiples will still prefetch */
-	out_be32 (&xcpci->target_ctrl, 0x00000000);
-
-	/* Initiator windows */
-	out_be32 (&xcpci->init_win0,  (win0 >> 16) | win0 | 0x003f0000);
-	out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 ));
-	out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 ));
-
-	out_be32 (&xcpci->init_win_cfg,
-		PCI_INIT_WIN_CFG_WIN0_CTRL_EN |
-		PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO |
-		PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO);
-
-	out_be32 (&xcpci->init_ctrl, 0x00000000);
-
-	/* Enable bus master and mem access */
-	out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M);
-
-	/* Cache line size and master latency */
-	out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT));
-
-	out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
-	out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-
-	out_be32 (&xcpci->target_bar0,
-		PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN);
-	out_be32 (&xcpci->target_bar1,
-		PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN);
-
-	/* Deassert reset bit */
-	out_be32 (&xcpci->glb_stat_ctl, 0x00000000);
-
-	/* Enable PCI bus master support */
-	/* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
-	       PCIREQ2, PCIGNT2 */
-	out_be32((volatile u32 *)&portcfg->pcfg3,
-		(in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F));
-	out_be32((volatile u32 *)&portcfg->pcfg3,
-		(in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180));
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	pci_set_region(hose->regions + 0,
-		CONFIG_PCI_MEM_BUS,
-		CONFIG_PCI_MEM_PHYS,
-		CONFIG_PCI_MEM_SIZE,
-		PCI_REGION_MEM);
-
-	pci_set_region(hose->regions + 1,
-		CONFIG_PCI_IO_BUS,
-		CONFIG_PCI_IO_PHYS,
-		CONFIG_PCI_IO_SIZE,
-		PCI_REGION_IO);
-
-	pci_set_region(hose->regions + 2,
-		CONFIG_PCI_SYS_MEM_BUS,
-		CONFIG_PCI_SYS_MEM_PHYS,
-		CONFIG_PCI_SYS_MEM_SIZE,
-		PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
-	hose->region_count = 3;
-
-	hose->cfg_addr = &(xcpci->cfg_adr);
-	hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS;
-
-	pci_set_ops(hose,
-		mpc8220_pci_read_config_byte,
-		mpc8220_pci_read_config_word,
-		mpc8220_pci_read_config_dword,
-		mpc8220_pci_write_config_byte,
-		mpc8220_pci_write_config_word,
-		mpc8220_pci_write_config_dword);
-
-	/* Hose scan */
-	pci_register_hose(hose);
-	hose->last_busno = pci_hose_scan(hose);
-
-	out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
-	out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-}
-
-#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/cpu/mpc8220/speed.c b/arch/powerpc/cpu/mpc8220/speed.c
deleted file mode 100644
index bb72e5ce126..00000000000
--- a/arch/powerpc/cpu/mpc8220/speed.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-typedef struct pllmultiplier {
-	u8 hid1;
-	int multi;
-	int vco_div;
-} pllcfg_t;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
-	pllcfg_t bus2core[] = {
-		{0x02, 2, 8},	/* 1 */
-		{0x01, 2, 4},
-		{0x0C, 3, 8},	/* 1.5 */
-		{0x00, 3, 4},
-		{0x18, 3, 2},
-		{0x05, 4, 4},	/* 2 */
-		{0x04, 4, 2},
-		{0x11, 5, 4},	/* 2.5 */
-		{0x06, 5, 2},
-		{0x10, 6, 4},	/* 3 */
-		{0x08, 6, 2},
-		{0x0E, 7, 2},	/* 3.5 */
-		{0x0A, 8, 2},	/* 4 */
-		{0x07, 9, 2},	/* 4.5 */
-		{0x0B, 10, 2},	/* 5 */
-		{0x09, 11, 2},	/* 5.5 */
-		{0x0D, 12, 2},	/* 6 */
-		{0x12, 13, 2},	/* 6.5 */
-		{0x14, 14, 2},	/* 7 */
-		{0x16, 15, 2},	/* 7.5 */
-		{0x1C, 16, 2}	/* 8 */
-	};
-	u32 hid1;
-	int i, size, pci2bus;
-
-#if !defined(CONFIG_SYS_MPC8220_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
-#endif
-
-	gd->arch.inp_clk = CONFIG_SYS_MPC8220_CLKIN;
-
-	/* Read XLB to PCI(INP) clock multiplier */
-	pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
-		PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT;
-
-	/* XLB bus clock */
-	gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus;
-
-	/* PCI clock is same as input clock */
-	gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN;
-
-	/* FlexBus is temporary set as the same as input clock */
-	/* will do dynamic in the future */
-	gd->arch.flb_clk = CONFIG_SYS_MPC8220_CLKIN;
-
-	/* CPU Clock - Read HID1 */
-	asm volatile ("mfspr %0, 1009":"=r" (hid1):);
-
-	size = sizeof (bus2core) / sizeof (pllcfg_t);
-
-	hid1 >>= 27;
-
-	for (i = 0; i < size; i++)
-		if (hid1 == bus2core[i].hid1) {
-			gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
-			gd->arch.vco_clk =
-				CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER *
-				(gd->pci_clk * bus2core[i].vco_div) / 2;
-			break;
-		}
-
-	/* hardcoded 81MHz for now */
-	gd->arch.pev_clk = 81000000;
-
-	return (0);
-}
-
-int prt_mpc8220_clks (void)
-{
-	char buf1[32], buf2[32], buf3[32], buf4[32];
-
-	printf ("       Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n",
-		strmhz(buf1, gd->bus_clk),
-		strmhz(buf2, gd->cpu_clk),
-		strmhz(buf3, gd->pci_clk),
-		strmhz(buf4, gd->arch.vco_clk)
-	);
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S
deleted file mode 100644
index 6295631913d..00000000000
--- a/arch/powerpc/cpu/mpc8220/start.S
+++ /dev/null
@@ -1,734 +0,0 @@
-/*
- *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
- *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- *  Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *  U-Boot - Startup Code for MPC8220 CPUs
- */
-#include <asm-offsets.h>
-#include <config.h>
-#include <mpc8220.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1   /* avoid reading Linux autoconf.h file  */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/u-boot.h>
-
-/* We don't want the  MMU yet.
-*/
-#undef	MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-	START_GOT
-	GOT_ENTRY(_GOT2_TABLE_)
-	GOT_ENTRY(_FIXUP_TABLE_)
-
-	GOT_ENTRY(_start)
-	GOT_ENTRY(_start_of_vectors)
-	GOT_ENTRY(_end_of_vectors)
-	GOT_ENTRY(transfer_to_handler)
-
-	GOT_ENTRY(__init_end)
-	GOT_ENTRY(__bss_end)
-	GOT_ENTRY(__bss_start)
-	END_GOT
-
-/*
- * Version string
- */
-	.data
-	.globl	version_string
-version_string:
-	.ascii U_BOOT_VERSION_STRING, "\0"
-
-/*
- * Exception vectors
- */
-	.text
-	. = EXC_OFF_SYS_RESET
-	.globl	_start
-_start:
-	mfmsr	r5		    /* save msr contents    */
-
-	/* replace default MBAR base address from 0x80000000
-	    to 0xf0000000 */
-
-#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
-	lis	r3, CONFIG_SYS_MBAR@h
-	ori	r3, r3, CONFIG_SYS_MBAR@l
-
-	/* MBAR is mirrored into the MBAR SPR */
-	mtspr	MBAR,r3
-	mtspr	SPRN_SPRG7W,r3
-	lis	r4, CONFIG_SYS_DEFAULT_MBAR@h
-	stw	r3, 0(r4)
-#endif /* CONFIG_SYS_DEFAULT_MBAR */
-
-	/* Initialise the MPC8220 processor core			*/
-	/*--------------------------------------------------------------*/
-
-	bl  init_8220_core
-
-	/* initialize some things that are hard to access from C	*/
-	/*--------------------------------------------------------------*/
-
-	/* set up stack in on-chip SRAM */
-	lis	r3, CONFIG_SYS_INIT_RAM_ADDR@h
-	ori	r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-	ori	r1, r3, CONFIG_SYS_INIT_SP_OFFSET
-
-	li	r0, 0		/* Make room for stack frame header and */
-	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
-	stwu	r0, -4(r1)	/* stack backtraces terminate cleanly	*/
-
-	/* let the C-code set up the rest				*/
-	/*								*/
-	/* Be careful to keep code relocatable !			*/
-	/*--------------------------------------------------------------*/
-
-	GET_GOT			/* initialize GOT access		*/
-
-	/* r3: IMMR */
-	bl	cpu_init_f	/* run low-level CPU init code (in Flash)*/
-
-	bl	board_init_f	/* run 1st part of board init code (in Flash)*/
-
-	/* NOTREACHED - board_init_f() does not return */
-
-/*
- * Vector Table
- */
-
-	.globl	_start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
-	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
-	STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
-	STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
-	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	mfspr	r4,DAR
-	stw	r4,_DAR(r21)
-	mfspr	r5,DSISR
-	stw	r5,_DSISR(r21)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
-	. = 0x700
-ProgramCheck:
-	EXCEPTION_PROLOG(SRR0, SRR1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
-		MSR_KERNEL, COPY_EE)
-
-	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
-	/* I guess we could implement decrementer, and may have
-	 * to someday for timekeeping.
-	 */
-	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
-	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
-	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
-	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
-	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
-	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
-	STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
-	STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
-	. = 0x1300
-	/*
-	 * This exception occurs when the program counter matches the
-	 * Instruction Address Breakpoint Register (IABR).
-	 *
-	 * I want the cpu to halt if this occurs so I can hunt around
-	 * with the debugger and look at things.
-	 *
-	 * When DEBUG is defined, both machine check enable (in the MSR)
-	 * and checkstop reset enable (in the reset mode register) are
-	 * turned off and so a checkstop condition will result in the cpu
-	 * halting.
-	 *
-	 * I force the cpu into a checkstop condition by putting an illegal
-	 * instruction here (at least this is the theory).
-	 *
-	 * well - that didnt work, so just do an infinite loop!
-	 */
-1:	b	1b
-#else
-	STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
-	STD_EXCEPTION(0x1400, SMI, UnknownException)
-
-	STD_EXCEPTION(0x1500, Trap_15, UnknownException)
-	STD_EXCEPTION(0x1600, Trap_16, UnknownException)
-	STD_EXCEPTION(0x1700, Trap_17, UnknownException)
-	STD_EXCEPTION(0x1800, Trap_18, UnknownException)
-	STD_EXCEPTION(0x1900, Trap_19, UnknownException)
-	STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
-	STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
-	STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
-	STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
-	STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
-	STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
-	STD_EXCEPTION(0x2000, Trap_20, UnknownException)
-	STD_EXCEPTION(0x2100, Trap_21, UnknownException)
-	STD_EXCEPTION(0x2200, Trap_22, UnknownException)
-	STD_EXCEPTION(0x2300, Trap_23, UnknownException)
-	STD_EXCEPTION(0x2400, Trap_24, UnknownException)
-	STD_EXCEPTION(0x2500, Trap_25, UnknownException)
-	STD_EXCEPTION(0x2600, Trap_26, UnknownException)
-	STD_EXCEPTION(0x2700, Trap_27, UnknownException)
-	STD_EXCEPTION(0x2800, Trap_28, UnknownException)
-	STD_EXCEPTION(0x2900, Trap_29, UnknownException)
-	STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
-	STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
-	STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
-	STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
-	STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
-	STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
-	.globl	_end_of_vectors
-_end_of_vectors:
-
-	. = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
-	.globl	transfer_to_handler
-transfer_to_handler:
-	stw	r22,_NIP(r21)
-	lis	r22,MSR_POW@h
-	andc	r23,r23,r22
-	stw	r23,_MSR(r21)
-	SAVE_GPR(7, r21)
-	SAVE_4GPRS(8, r21)
-	SAVE_8GPRS(12, r21)
-	SAVE_8GPRS(24, r21)
-	mflr	r23
-	andi.	r24,r23,0x3f00	    /* get vector offset */
-	stw	r24,TRAP(r21)
-	li	r22,0
-	stw	r22,RESULT(r21)
-	lwz	r24,0(r23)		/* virtual address of handler */
-	lwz	r23,4(r23)		/* where to go when done */
-	mtspr	SRR0,r24
-	mtspr	SRR1,r20
-	mtlr	r23
-	SYNC
-	rfi			    /* jump to handler, enable MMU */
-
-int_return:
-	mfmsr	r28		    /* Disable interrupts */
-	li	r4,0
-	ori	r4,r4,MSR_EE
-	andc	r28,r28,r4
-	SYNC			    /* Some chip revs need this... */
-	mtmsr	r28
-	SYNC
-	lwz	r2,_CTR(r1)
-	lwz	r0,_LINK(r1)
-	mtctr	r2
-	mtlr	r0
-	lwz	r2,_XER(r1)
-	lwz	r0,_CCR(r1)
-	mtspr	XER,r2
-	mtcrf	0xFF,r0
-	REST_10GPRS(3, r1)
-	REST_10GPRS(13, r1)
-	REST_8GPRS(23, r1)
-	REST_GPR(31, r1)
-	lwz	r2,_NIP(r1)	    /* Restore environment */
-	lwz	r0,_MSR(r1)
-	mtspr	SRR0,r2
-	mtspr	SRR1,r0
-	lwz	r0,GPR0(r1)
-	lwz	r2,GPR2(r1)
-	lwz	r1,GPR1(r1)
-	SYNC
-	rfi
-
-/*
- * This code initialises the MPC8220 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
-	.globl	init_8220_core
-init_8220_core:
-
-	/* Initialize machine status; enable machine check interrupt	*/
-	/*--------------------------------------------------------------*/
-
-	li	r3, MSR_KERNEL	    /* Set ME and RI flags		*/
-	rlwimi	r3, r5, 0, 25, 25   /* preserve IP bit set by HRCW	*/
-#ifdef DEBUG
-	rlwimi	r3, r5, 0, 21, 22   /* debugger might set SE & BE bits	*/
-#endif
-	SYNC			    /* Some chip revs need this...	*/
-	mtmsr	r3
-	SYNC
-	mtspr	SRR1, r3	    /* Make SRR1 match MSR		*/
-
-	/* Initialize the Hardware Implementation-dependent Registers	*/
-	/* HID0 also contains cache control				*/
-	/*--------------------------------------------------------------*/
-
-	lis	r3, CONFIG_SYS_HID0_INIT@h
-	ori	r3, r3, CONFIG_SYS_HID0_INIT@l
-	SYNC
-	mtspr	HID0, r3
-
-	lis	r3, CONFIG_SYS_HID0_FINAL@h
-	ori	r3, r3, CONFIG_SYS_HID0_FINAL@l
-	SYNC
-	mtspr	HID0, r3
-
-	/* Enable Extra BATs */
-	mfspr	r3, 1011    /* HID2 */
-	lis	r4, 0x0004
-	ori	r4, r4, 0x0000
-	or	r4, r4, r3
-	mtspr	1011, r4
-	sync
-
-	/* clear all BAT's						*/
-	/*--------------------------------------------------------------*/
-
-	li	r0, 0
-	mtspr	DBAT0U, r0
-	mtspr	DBAT0L, r0
-	mtspr	DBAT1U, r0
-	mtspr	DBAT1L, r0
-	mtspr	DBAT2U, r0
-	mtspr	DBAT2L, r0
-	mtspr	DBAT3U, r0
-	mtspr	DBAT3L, r0
-	mtspr	DBAT4U, r0
-	mtspr	DBAT4L, r0
-	mtspr	DBAT5U, r0
-	mtspr	DBAT5L, r0
-	mtspr	DBAT6U, r0
-	mtspr	DBAT6L, r0
-	mtspr	DBAT7U, r0
-	mtspr	DBAT7L, r0
-	mtspr	IBAT0U, r0
-	mtspr	IBAT0L, r0
-	mtspr	IBAT1U, r0
-	mtspr	IBAT1L, r0
-	mtspr	IBAT2U, r0
-	mtspr	IBAT2L, r0
-	mtspr	IBAT3U, r0
-	mtspr	IBAT3L, r0
-	mtspr	IBAT4U, r0
-	mtspr	IBAT4L, r0
-	mtspr	IBAT5U, r0
-	mtspr	IBAT5L, r0
-	mtspr	IBAT6U, r0
-	mtspr	IBAT6L, r0
-	mtspr	IBAT7U, r0
-	mtspr	IBAT7L, r0
-	SYNC
-
-	/* invalidate all tlb's						*/
-	/*								*/
-	/* From the 603e User Manual: "The 603e provides the ability to */
-	/* invalidate a TLB entry. The TLB Invalidate Entry (tlbie)	*/
-	/* instruction invalidates the TLB entry indexed by the EA, and */
-	/* operates on both the instruction and data TLBs simultaneously*/
-	/* invalidating four TLB entries (both sets in each TLB). The	*/
-	/* index corresponds to bits 15-19 of the EA. To invalidate all */
-	/* entries within both TLBs, 32 tlbie instructions should be	*/
-	/* issued, incrementing this field by one each time."		*/
-	/*								*/
-	/* "Note that the tlbia instruction is not implemented on the	*/
-	/* 603e."							*/
-	/*								*/
-	/* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000	*/
-	/* incrementing by 0x1000 each time. The code below is sort of	*/
-	/* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S	*/
-	/*								*/
-	/*--------------------------------------------------------------*/
-
-	li	r3, 32
-	mtctr	r3
-	li	r3, 0
-1:	tlbie	r3
-	addi	r3, r3, 0x1000
-	bdnz	1b
-	SYNC
-
-	/* Done!							*/
-	/*--------------------------------------------------------------*/
-
-	blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
-	.globl	icache_enable
-icache_enable:
-	lis	r4, 0
-	ori	r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit		*/
-	rlwinm	r3, r4, 0, 21, 19     /* clear the ICFI bit		*/
-
-	/*
-	 * The setting of the instruction cache enable (ICE) bit must be
-	 * preceded by an isync instruction to prevent the cache from being
-	 * enabled or disabled while an instruction access is in progress.
-	 */
-	isync
-	mtspr	HID0, r4	      /* Enable Instr Cache & Inval cache */
-	mtspr	HID0, r3	      /* using 2 consec instructions	*/
-	isync
-	blr
-
-	.globl	icache_disable
-icache_disable:
-	mfspr	r3, HID0
-	rlwinm	r3, r3, 0, 17, 15     /* clear the ICE bit		*/
-	mtspr	HID0, r3
-	isync
-	blr
-
-	.globl	icache_status
-icache_status:
-	mfspr	r3, HID0
-	rlwinm	r3, r3, HID0_ICE_BITPOS + 1, 31, 31
-	blr
-
-	.globl	dcache_enable
-dcache_enable:
-	lis	r4, 0
-	ori	r4, r4, HID0_DCE|HID0_DCFI /* set DCE & DCFI bit	*/
-	rlwinm	r3, r4, 0, 22, 20     /* clear the DCFI bit		*/
-
-	/* Enable address translation in MSR bit */
-	mfmsr	r5
-	ori	r5, r5, 0x
-
-
-	/*
-	 * The setting of the instruction cache enable (ICE) bit must be
-	 * preceded by an isync instruction to prevent the cache from being
-	 * enabled or disabled while an instruction access is in progress.
-	 */
-	isync
-	mtspr	HID0, r4	      /* Enable Data Cache & Inval cache*/
-	mtspr	HID0, r3	      /* using 2 consec instructions	*/
-	isync
-	blr
-
-	.globl	dcache_disable
-dcache_disable:
-	mfspr	r3, HID0
-	rlwinm	r3, r3, 0, 18, 16     /* clear the DCE bit */
-	mtspr	HID0, r3
-	isync
-	blr
-
-	.globl	dcache_status
-dcache_status:
-	mfspr	r3, HID0
-	rlwinm	r3, r3, HID0_DCE_BITPOS + 1, 31, 31
-	blr
-
-	.globl	get_pvr
-get_pvr:
-	mfspr	r3, PVR
-	blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
-	.globl	relocate_code
-relocate_code:
-	mr	r1,  r3	    /* Set new stack pointer		*/
-	mr	r9,  r4	    /* Save copy of Global Data pointer */
-	mr	r10, r5	    /* Save copy of Destination Address */
-
-	GET_GOT
-	mr	r3,  r5	    /* Destination Address		*/
-	lis	r4, CONFIG_SYS_MONITOR_BASE@h	/* Source Address	*/
-	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
-	lwz	r5, GOT(__init_end)
-	sub	r5, r5, r4
-	li	r6, CONFIG_SYS_CACHELINE_SIZE	/* Cache Line Size	*/
-
-	/*
-	 * Fix GOT pointer:
-	 *
-	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
-	 *
-	 * Offset:
-	 */
-	sub	r15, r10, r4
-
-	/* First our own GOT */
-	add	r12, r12, r15
-	/* then the one used by the C code */
-	add	r30, r30, r15
-
-	/*
-	 * Now relocate code
-	 */
-
-	cmplw	cr1,r3,r4
-	addi	r0,r5,3
-	srwi.	r0,r0,2
-	beq	cr1,4f	    /* In place copy is not necessary	*/
-	beq	7f	    /* Protect against 0 count		*/
-	mtctr	r0
-	bge	cr1,2f
-
-	la	r8,-4(r4)
-	la	r7,-4(r3)
-1:	lwzu	r0,4(r8)
-	stwu	r0,4(r7)
-	bdnz	1b
-	b	4f
-
-2:	slwi	r0,r0,2
-	add	r8,r4,r0
-	add	r7,r3,r0
-3:	lwzu	r0,-4(r8)
-	stwu	r0,-4(r7)
-	bdnz	3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4:	cmpwi	r6,0
-	add	r5,r3,r5
-	beq	7f	    /* Always flush prefetch queue in any case	*/
-	subi	r0,r6,1
-	andc	r3,r3,r0
-	mfspr	r7,HID0	    /* don't do dcbst if dcache is disabled	*/
-	rlwinm	r7,r7,HID0_DCE_BITPOS+1,31,31
-	cmpwi	r7,0
-	beq	9f
-	mr	r4,r3
-5:	dcbst	0,r4
-	add	r4,r4,r6
-	cmplw	r4,r5
-	blt	5b
-	sync		    /* Wait for all dcbst to complete on bus	*/
-9:	mfspr	r7,HID0	    /* don't do icbi if icache is disabled	*/
-	rlwinm	r7,r7,HID0_ICE_BITPOS+1,31,31
-	cmpwi	r7,0
-	beq	7f
-	mr	r4,r3
-6:	icbi	0,r4
-	add	r4,r4,r6
-	cmplw	r4,r5
-	blt	6b
-7:	sync		    /* Wait for all icbi to complete on bus	*/
-	isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
-	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
-	mtlr	r0
-	blr
-
-in_ram:
-
-	/*
-	 * Relocation Function, r12 point to got2+0x8000
-	 *
-	 * Adjust got2 pointers, no need to check for 0, this code
-	 * already puts a few entries in the table.
-	 */
-	li	r0,__got2_entries@sectoff@l
-	la	r3,GOT(_GOT2_TABLE_)
-	lwz	r11,GOT(_GOT2_TABLE_)
-	mtctr	r0
-	sub	r11,r3,r11
-	addi	r3,r3,-4
-1:	lwzu	r0,4(r3)
-	cmpwi	r0,0
-	beq-	2f
-	add	r0,r0,r11
-	stw	r0,0(r3)
-2:	bdnz	1b
-
-	/*
-	 * Now adjust the fixups and the pointers to the fixups
-	 * in case we need to move ourselves again.
-	 */
-	li	r0,__fixup_entries@sectoff@l
-	lwz	r3,GOT(_FIXUP_TABLE_)
-	cmpwi	r0,0
-	mtctr	r0
-	addi	r3,r3,-4
-	beq	4f
-3:	lwzu	r4,4(r3)
-	lwzux	r0,r4,r11
-	cmpwi	r0,0
-	add	r0,r0,r11
-	stw	r4,0(r3)
-	beq-	5f
-	stw	r0,0(r4)
-5:	bdnz	3b
-4:
-clear_bss:
-	/*
-	 * Now clear BSS segment
-	 */
-	lwz	r3,GOT(__bss_start)
-	lwz	r4,GOT(__bss_end)
-
-	cmplw	0, r3, r4
-	beq	6f
-
-	li	r0, 0
-5:
-	stw	r0, 0(r3)
-	addi	r3, r3, 4
-	cmplw	0, r3, r4
-	bne	5b
-6:
-
-	mr	r3, r9	    /* Global Data pointer	*/
-	mr	r4, r10	    /* Destination Address	*/
-	bl	board_init_r
-
-	/*
-	 * Copy exception vector code to low memory
-	 *
-	 * r3: dest_addr
-	 * r7: source address, r8: end address, r9: target address
-	 */
-	.globl	trap_init
-trap_init:
-	mflr	r4	    /* save link register		*/
-	GET_GOT
-	lwz	r7, GOT(_start)
-	lwz	r8, GOT(_end_of_vectors)
-
-	li	r9, 0x100   /* reset vector always at 0x100	*/
-
-	cmplw	0, r7, r8
-	bgelr		    /* return if r7>=r8 - just in case	*/
-1:
-	lwz	r0, 0(r7)
-	stw	r0, 0(r9)
-	addi	r7, r7, 4
-	addi	r9, r9, 4
-	cmplw	0, r7, r8
-	bne	1b
-
-	/*
-	 * relocate `hdlr' and `int_return' entries
-	 */
-	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
-	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
-	bl	trap_reloc
-	addi	r7, r7, 0x100	    /* next exception vector	    */
-	cmplw	0, r7, r8
-	blt	2b
-
-	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
-	bl	trap_reloc
-
-	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
-	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
-	bl	trap_reloc
-	addi	r7, r7, 0x100	    /* next exception vector	    */
-	cmplw	0, r7, r8
-	blt	3b
-
-	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
-	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
-	bl	trap_reloc
-	addi	r7, r7, 0x100	    /* next exception vector	    */
-	cmplw	0, r7, r8
-	blt	4b
-
-	mfmsr	r3		    /* now that the vectors have    */
-	lis	r7, MSR_IP@h	    /* relocated into low memory    */
-	ori	r7, r7, MSR_IP@l    /* MSR[IP] can be turned off    */
-	andc	r3, r3, r7	    /* (if it was on)		    */
-	SYNC			    /* Some chip revs need this...  */
-	mtmsr	r3
-	SYNC
-
-	mtlr	r4		    /* restore link register	    */
-	blr
diff --git a/arch/powerpc/cpu/mpc8220/traps.c b/arch/powerpc/cpu/mpc8220/traps.c
deleted file mode 100644
index 19d6cb57cfd..00000000000
--- a/arch/powerpc/cpu/mpc8220/traps.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * linux/arch/powerpc/kernel/traps.c
- *
- * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM      0x02000000
-
-/*
- * Trap & Exception support
- */
-
-static void print_backtrace(unsigned long *sp)
-{
-	int cnt = 0;
-	unsigned long i;
-
-	printf("Call backtrace: ");
-	while (sp) {
-		if ((uint) sp > END_OF_MEM)
-			break;
-
-		i = sp[1];
-		if (cnt++ % 7 == 0)
-			printf("\n");
-		printf("%08lX ", i);
-		if (cnt > 32)
-			break;
-		sp = (unsigned long *) *sp;
-	}
-	printf("\n");
-}
-
-void show_regs(struct pt_regs *regs)
-{
-	int i;
-
-	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
-		regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
-	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
-		regs->msr,
-		regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
-		regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0,
-		regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0);
-
-	printf("\n");
-	for (i = 0; i < 32; i++) {
-		if ((i % 8) == 0) {
-			printf("GPR%02d: ", i);
-		}
-
-		printf("%08lX ", regs->gpr[i]);
-		if ((i % 8) == 7) {
-			printf("\n");
-		}
-	}
-}
-
-
-static void _exception(int signr, struct pt_regs *regs)
-{
-	show_regs(regs);
-	print_backtrace((unsigned long *) regs->gpr[1]);
-	panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
-}
-
-void MachineCheckException(struct pt_regs *regs)
-{
-	unsigned long fixup = search_exception_table(regs->nip);
-
-	/* Probing PCI using config cycles cause this exception
-	 * when a device is not present.  Catch it and return to
-	 * the PCI exception handler.
-	 */
-	if (fixup) {
-		regs->nip = fixup;
-		return;
-	}
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-
-	printf("Machine check in kernel mode.\n");
-	printf("Caused by (from msr): ");
-	printf("regs %p ", regs);
-	/* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
-	switch (regs->msr & 0x000F0000) {
-	case (0x80000000 >> 12):
-		printf("Machine check signal - probably due to mm fault\n"
-			"with mmu off\n");
-		break;
-	case (0x80000000 >> 13):
-		printf("Transfer error ack signal\n");
-		break;
-	case (0x80000000 >> 14):
-		printf("Data parity signal\n");
-		break;
-	case (0x80000000 >> 15):
-		printf("Address parity signal\n");
-		break;
-	default:
-		printf("Unknown values in msr\n");
-	}
-	show_regs(regs);
-	print_backtrace((unsigned long *) regs->gpr[1]);
-	panic("machine check");
-}
-
-void AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *) regs->gpr[1]);
-	panic("Alignment Exception");
-}
-
-void ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *) regs->gpr[1]);
-	panic("Program Check Exception");
-}
-
-void SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	show_regs(regs);
-	print_backtrace((unsigned long *) regs->gpr[1]);
-	panic("Software Emulation Exception");
-}
-
-
-void UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
-		return;
-#endif
-	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
-		regs->nip, regs->msr, regs->trap);
-	_exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void DebugException(struct pt_regs *regs)
-{
-
-	printf("Debugger trap at @ %lx\n", regs->nip);
-	show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
-	do_bedbug_breakpoint(regs);
-#endif
-}
-
-/* Probe an address by reading.  If not present, return -1, otherwise
- * return 0.
- */
-int addr_probe(uint *addr)
-{
-#if 0
-	int retval;
-
-	__asm__ __volatile__ ("1: lwz %0,0(%1)\n"
-			      "   eieio\n"
-			      "   li %0,0\n"
-			      "2:\n"
-			      ".section .fixup,\"ax\"\n"
-			      "3: li %0,-1\n"
-			      "   b 2b\n"
-			      ".section __ex_table,\"a\"\n"
-			      "   .align 2\n"
-			      "   .long 1b,3b\n"
-			      ".text":"=r" (retval):"r" (addr));
-
-	return (retval);
-#endif
-	return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds
deleted file mode 100644
index dc63d2081bd..00000000000
--- a/arch/powerpc/cpu/mpc8220/u-boot.lds
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2003-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8220/start.o	(.text*)
-    *(.text*)
-    . = ALIGN(16);
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/arch/powerpc/cpu/mpc8220/uart.c b/arch/powerpc/cpu/mpc8220/uart.c
deleted file mode 100644
index 772528f82c3..00000000000
--- a/arch/powerpc/cpu/mpc8220/uart.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PSC_BASE   MMAP_PSC1
-
-#if defined(CONFIG_PSC_CONSOLE)
-static int mpc8220_serial_init(void)
-{
-	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-	u32 counter;
-
-	/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
-	psc->cr = 0;
-	psc->ipcr_acr = 0;
-	psc->isr_imr = 0;
-
-	/* write to CSR: RX/TX baud rate from timers */
-	psc->sr_csr = 0xdd000000;
-
-	psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR2_STOP_BITS_1;
-
-	/* Setting up BaudRate */
-	counter = ((gd->bus_clk / gd->baudrate)) >> 5;
-	counter++;
-
-	/* write to CTUR: divide counter upper byte */
-	psc->ctur = ((counter & 0xff00) << 16);
-	/* write to CTLR: divide counter lower byte */
-	psc->ctlr = ((counter & 0x00ff) << 24);
-
-	psc->cr = PSC_CR_RST_RX_CMD;
-	psc->cr = PSC_CR_RST_TX_CMD;
-	psc->cr = PSC_CR_RST_ERR_STS_CMD;
-	psc->cr = PSC_CR_RST_BRK_INT_CMD;
-	psc->cr = PSC_CR_RST_MR_PTR_CMD;
-
-	psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
-	return (0);
-}
-
-static void mpc8220_serial_putc(const char c)
-{
-	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
-	if (c == '\n')
-		serial_putc ('\r');
-
-	/* Wait for last character to go. */
-	while (!(psc->sr_csr & PSC_SR_TXRDY));
-
-	psc->xmitbuf[0] = c;
-}
-
-static int mpc8220_serial_getc(void)
-{
-	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
-	/* Wait for a character to arrive. */
-	while (!(psc->sr_csr & PSC_SR_RXRDY));
-	return psc->xmitbuf[2];
-}
-
-static int mpc8220_serial_tstc(void)
-{
-	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
-	return (psc->sr_csr & PSC_SR_RXRDY);
-}
-
-static void mpc8220_serial_setbrg(void)
-{
-	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-	u32 counter;
-
-	counter = ((gd->bus_clk / gd->baudrate)) >> 5;
-	counter++;
-
-	/* write to CTUR: divide counter upper byte */
-	psc->ctur = ((counter & 0xff00) << 16);
-	/* write to CTLR: divide counter lower byte */
-	psc->ctlr = ((counter & 0x00ff) << 24);
-
-	psc->cr = PSC_CR_RST_RX_CMD;
-	psc->cr = PSC_CR_RST_TX_CMD;
-
-	psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
-}
-
-static struct serial_device mpc8220_serial_drv = {
-	.name	= "mpc8220_serial",
-	.start	= mpc8220_serial_init,
-	.stop	= NULL,
-	.setbrg	= mpc8220_serial_setbrg,
-	.putc	= mpc8220_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= mpc8220_serial_getc,
-	.tstc	= mpc8220_serial_tstc,
-};
-
-void mpc8220_serial_initialize(void)
-{
-	serial_register(&mpc8220_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &mpc8220_serial_drv;
-}
-#endif /* CONFIG_PSC_CONSOLE */
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index d5db8549cc9..c02447fd281 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -104,12 +104,6 @@ struct arch_global_data {
 	u32 ips_clk;
 	u32 csb_clk;
 #endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC8220)
-	unsigned long inp_clk;
-	unsigned long vco_clk;
-	unsigned long pev_clk;
-	unsigned long flb_clk;
-#endif
 	unsigned long reset_status;	/* reset status register at boot */
 #if defined(CONFIG_MPC83xx)
 	unsigned long arbiter_event_attributes;
diff --git a/arch/powerpc/include/asm/immap_8220.h b/arch/powerpc/include/asm/immap_8220.h
deleted file mode 100644
index f9595f42d9b..00000000000
--- a/arch/powerpc/include/asm/immap_8220.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * MPC8220 Internal Memory Map
- * Copyright (c) 2004 TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * The Internal Memory Map of the 8220.
- *
- */
-#ifndef __IMMAP_MPC8220__
-#define __IMMAP_MPC8220__
-
-/*
- * System configuration registers.
- */
-typedef struct sys_conf {
-    u16     mbar;       /* 0x00 */
-    u16     res1;
-
-    u16     res2;       /* 0x04 */
-    u16     sdramds;
-
-    u32     res3[6];    /* 0x08 */
-
-    u32     cscfg[6];   /* 0x20 */
-
-    u32     res4[2];    /* 0x38 */
-
-    u8      res5[3];    /* 0x40 */
-    u8      rstctrl;
-
-    u8      res6[3];    /* 0x44 */
-    u8      rststat;
-
-    u32     res7[2];    /* 0x48 */
-
-    u32     jtagid;     /* 0x50 */
-} sysconf8220_t;
-
-
-/*
- * Memory controller registers.
- */
-typedef struct mem_ctlr {
-    ushort  mode;           /* 0x100 */
-    ushort  res1;
-    u32     ctrl;           /* 0x104 */
-    u32     cfg1;           /* 0x108 */
-    u32     cfg2;           /* 0x10c */
-} memctl8220_t;
-
-/*
- * XLB Arbitration registers
- */
-typedef struct xlb_arb
-{
-    uint    res1[16];       /* 0x200 */
-    uint    config;         /* 0x240 */
-    uint    version;        /* 0x244 */
-    uint    status;         /* 0x248 */
-    uint    intEnable;      /* 0x24c */
-    uint    addrCap;        /* 0x250 */
-    uint    busSigCap;      /* 0x254 */
-    uint    addrTenTimeOut; /* 0x258 */
-    uint    dataTenTimeOut; /* 0x25c */
-    uint    busActTimeOut;  /* 0x260 */
-    uint    mastPriEn;      /* 0x264 */
-    uint    mastPriority;   /* 0x268 */
-    uint    baseAddr;       /* 0x26c */
-} xlbarb8220_t;
-
-/*
- * Flexbus registers
- */
-typedef struct flexbus
-{
-    ushort  csar0;          /* 0x00 */
-    ushort  res1;
-    uint    csmr0;          /* 0x04 */
-    uint    cscr0;          /* 0x08 */
-
-    ushort  csar1;          /* 0x0c */
-    ushort  res2;
-    uint    csmr1;          /* 0x10 */
-    uint    cscr1;          /* 0x14 */
-
-    ushort  csar2;          /* 0x18 */
-    ushort  res3;
-    uint    csmr2;          /* 0x1c */
-    uint    cscr2;          /* 0x20 */
-
-    ushort  csar3;          /* 0x24 */
-    ushort  res4;
-    uint    csmr3;          /* 0x28 */
-    uint    cscr3;          /* 0x2c */
-
-    ushort  csar4;          /* 0x30 */
-    ushort  res5;
-    uint    csmr4;          /* 0x34 */
-    uint    cscr4;          /* 0x38 */
-
-    ushort  csar5;          /* 0x3c */
-    ushort  res6;
-    uint    csmr5;          /* 0x40 */
-    uint    cscr5;          /* 0x44 */
-} flexbus8220_t;
-
-/*
- * GPIO registers
- */
-typedef struct gpio
-{
-    u32     out;        /* 0x00 */
-    u32     obs;        /* 0x04 */
-    u32     obc;        /* 0x08 */
-    u32     obt;        /* 0x0c */
-    u32     en;         /* 0x10 */
-    u32     ebs;        /* 0x14 */
-    u32     ebc;        /* 0x18 */
-    u32     ebt;        /* 0x1c */
-    u32     mc;         /* 0x20 */
-    u32     st;         /* 0x24 */
-    u32     intr;       /* 0x28 */
-} gpio8220_t;
-
-/*
- * General Purpose Timer registers
- */
-typedef struct gptimer
-{
-    u8  OCPW;
-    u8  OctIct;
-    u8  Control;
-    u8  Mode;
-
-    u16 Prescl;  /* Prescale */
-    u16 Count;   /* Count */
-
-    u16 PwmWid;  /* PWM Width */
-    u8  PwmOp;   /* Output Polarity */
-    u8  PwmLd;   /* Immediate Update */
-
-    u16 Capture; /* Capture internal counter */
-    u8  OvfPin;  /* Ovf and Pin */
-    u8  Int;     /* Interrupts */
-} gptmr8220_t;
-
-/*
- * PSC registers
- */
-typedef struct psc
-{
-    u32 mr1_2;             /* 0x00 Mode reg 1 & 2 */
-    u32 sr_csr;            /* 0x04 Status/Clock Select reg */
-    u32 cr;                /* 0x08 Command reg */
-    u8  xmitbuf[4];        /* 0x0c Receive/Transmit Buffer */
-    u32 ipcr_acr;          /* 0x10 Input Port Change/Auxiliary Control reg */
-    u32 isr_imr;           /* 0x14 Interrupt Status/Mask reg */
-    u32 ctur;              /* 0x18 Counter Timer Upper reg */
-    u32 ctlr;              /* 0x1c Counter Timer Lower reg */
-    u32 rsvd1[4];          /* 0x20 ... 0x2c */
-    u32 ivr;               /* 0x30 Interrupt Vector reg */
-    u32 ipr;               /* 0x34 Input Port reg */
-    u32 opsetr;            /* 0x38 Output Port Set reg */
-    u32 opresetr;          /* 0x3c Output Port Reset reg */
-    u32 sicr;              /* 0x40 PSC/IrDA control reg */
-    u32 ircr1;             /* 0x44 IrDA control reg 1*/
-    u32 ircr2;             /* 0x48 IrDA control reg 2*/
-    u32 irsdr;             /* 0x4c IrDA SIR Divide reg */
-    u32 irmdr;             /* 0x50 IrDA MIR Divide reg */
-    u32 irfdr;             /* 0x54 PSC IrDA FIR Divide reg */
-    u32 rfnum;             /* 0x58 RX-FIFO counter */
-    u32 txnum;             /* 0x5c TX-FIFO counter */
-    u32 rfdata;            /* 0x60 RX-FIFO data */
-    u32 rfstat;            /* 0x64 RX-FIFO status */
-    u32 rfcntl;            /* 0x68 RX-FIFO control */
-    u32 rfalarm;           /* 0x6c RX-FIFO alarm */
-    u32 rfrptr;            /* 0x70 RX-FIFO read pointer */
-    u32 rfwptr;            /* 0x74 RX-FIFO write pointer */
-    u32 rflfrptr;          /* 0x78 RX-FIFO last read frame pointer */
-    u32 rflfwptr;          /* 0x7c RX-FIFO last write frame pointer */
-
-    u32 tfdata;            /* 0x80 TX-FIFO data */
-    u32 tfstat;            /* 0x84 TX-FIFO status */
-    u32 tfcntl;            /* 0x88 TX-FIFO control */
-    u32 tfalarm;           /* 0x8c TX-FIFO alarm */
-    u32 tfrptr;            /* 0x90 TX-FIFO read pointer */
-    u32 tfwptr;            /* 0x94 TX-FIFO write pointer */
-    u32 tflfrptr;          /* 0x98 TX-FIFO last read frame pointer */
-    u32 tflfwptr;          /* 0x9c TX-FIFO last write frame pointer */
-} psc8220_t;
-
-/*
- * Interrupt Controller registers
- */
-typedef struct interrupt_controller {
-} intctl8220_t;
-
-
-/* Fast controllers
-*/
-
-/*
- * I2C registers
- */
-typedef struct i2c
-{
-    u8   adr;            /* 0x00 */
-    u8   res1[3];
-    u8   fdr;            /* 0x04 */
-    u8   res2[3];
-    u8   cr;             /* 0x08 */
-    u8   res3[3];
-    u8   sr;             /* 0x0C */
-    u8   res4[3];
-    u8   dr;             /* 0x10 */
-    u8   res5[3];
-    u32  reserved0;      /* 0x14 */
-    u32  reserved1;      /* 0x18 */
-    u32  reserved2;      /* 0x1c */
-    u8   icr;            /* 0x20 */
-    u8   res6[3];
-} i2c8220_t;
-
-/*
- * Port Configuration Registers
- */
-typedef struct pcfg
-{
-    uint    pcfg0;          /* 0x00 */
-    uint    pcfg1;          /* 0x04 */
-    uint    pcfg2;          /* 0x08 */
-    uint    pcfg3;          /* 0x0c */
-} pcfg8220_t;
-
-/* ...and the whole thing wrapped up....
-*/
-typedef struct immap {
-    sysconf8220_t   im_sysconf; /* System Configuration */
-    memctl8220_t    im_memctl;  /* Memory Controller */
-    xlbarb8220_t    im_xlbarb;  /* XLB Arbitration */
-    psc8220_t       im_psc;     /* PSC controller */
-    flexbus8220_t   im_fb;      /* FlexBus Controller */
-    i2c8220_t       im_i2c;     /* I2C control/status */
-    pcfg8220_t      im_pcfg;    /* Port configuration */
-} immap_t;
-
-#endif /* __IMMAP_MPC8220__ */
diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h
index cf972d20ce9..93496a079d9 100644
--- a/arch/powerpc/include/asm/u-boot.h
+++ b/arch/powerpc/include/asm/u-boot.h
@@ -58,14 +58,6 @@ typedef struct bd_info {
 #endif
 #if defined(CONFIG_MPC83xx)
 	unsigned long	bi_immrbar;
-#endif
-#if defined(CONFIG_MPC8220)
-	unsigned long	bi_mbar_base;	/* base of internal registers */
-	unsigned long   bi_inpfreq;     /* Input Freq, In MHz */
-	unsigned long   bi_pcifreq;     /* PCI Freq, in MHz */
-	unsigned long   bi_pevfreq;     /* PEV Freq, in MHz */
-	unsigned long   bi_flbfreq;     /* Flexbus Freq, in MHz */
-	unsigned long   bi_vcofreq;     /* VCO Freq, in MHz */
 #endif
 	unsigned long	bi_bootflags;	/* boot / reboot flag (Unused) */
 	unsigned long	bi_ip_addr;	/* IP Address */
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 41b22949ff9..fc4c1d58121 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -301,9 +301,6 @@ static init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_MPC5xxx)
 	prt_mpc5xxx_clks,
 #endif /* CONFIG_MPC5xxx */
-#if defined(CONFIG_MPC8220)
-	prt_mpc8220_clks,
-#endif
 	checkboard,
 	INIT_FUNC_WATCHDOG_INIT
 #if defined(CONFIG_MISC_INIT_F)
@@ -548,27 +545,6 @@ void board_init_f(ulong bootflag)
 #if defined(CONFIG_MPC83xx)
 	bd->bi_immrbar = CONFIG_SYS_IMMR;
 #endif
-#if defined(CONFIG_MPC8220)
-	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
-	bd->bi_inpfreq = gd->arch.inp_clk;
-	bd->bi_pcifreq = gd->pci_clk;
-	bd->bi_vcofreq = gd->arch.vco_clk;
-	bd->bi_pevfreq = gd->arch.pev_clk;
-	bd->bi_flbfreq = gd->arch.flb_clk;
-
-	/* store bootparam to sram (backward compatible), here? */
-	{
-		u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE;
-
-		*sram++ = gd->ram_size;
-		*sram++ = gd->bus_clk;
-		*sram++ = gd->arch.inp_clk;
-		*sram++ = gd->cpu_clk;
-		*sram++ = gd->arch.vco_clk;
-		*sram++ = gd->arch.flb_clk;
-		*sram++ = 0xb8c3ba11;	/* boot signature */
-	}
-#endif
 
 	WATCHDOG_RESET();
 	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 340b545e68e..dd6c98cdb48 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -286,13 +286,6 @@ static void set_clocks_in_mhz (bd_t *kbd)
 		/* convert all clock information to MHz */
 		kbd->bi_intfreq /= 1000000L;
 		kbd->bi_busfreq /= 1000000L;
-#if defined(CONFIG_MPC8220)
-		kbd->bi_inpfreq /= 1000000L;
-		kbd->bi_pcifreq /= 1000000L;
-		kbd->bi_pevfreq /= 1000000L;
-		kbd->bi_flbfreq /= 1000000L;
-		kbd->bi_vcofreq /= 1000000L;
-#endif
 #if defined(CONFIG_CPM2)
 		kbd->bi_cpmfreq /= 1000000L;
 		kbd->bi_brgfreq /= 1000000L;
diff --git a/board/alaska/Makefile b/board/alaska/Makefile
deleted file mode 100644
index a21f8516a77..00000000000
--- a/board/alaska/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= $(BOARD).o flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/alaska/README b/board/alaska/README
deleted file mode 100644
index 334507397d5..00000000000
--- a/board/alaska/README
+++ /dev/null
@@ -1,482 +0,0 @@
-Freescale Alaska MPC8220 board
-==============================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created 9/21/04
-===========================================
-
-
-Changed files:
-==============
-
-- Makefile		    added MPC8220 and Alaska8220_config
-- MAKEALL		    added MPC8220 and Alaska8220
-- README		    added CONFIG_MPC8220, Alaska8220_config
-
-- common/cmd_bdinfo.c	    added board information members for MPC8220
-- common/cmd_bootm.c	    added clocks for MPC8220 in do_bootm_linux()
-
-- include/common.h	    added CONFIG_MPC8220
-
-- include/asm-ppc/u-boot.h  added board information members for MPC8220
-- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
-			    vco_clk, pev_clk, flb_clk, and bExtUart
-
-- arch/powerpc/lib/board.c	    added CONFIG_MPC8220 support
-
-- net/eth.c		    added FEC support for MPC8220
-
-Added files:
-============
-- board/alaska		    directory for Alaska MPC8220
-- board/alaska/alaska.c	    Alaska dram and BATs setup
-- board/alaska/extserial.c  external serial (debug card serial) support
-- board/alaska/flash.c	    Socket (AMD) and Onboard (INTEL) flash support
-- board/alaska/serial.c	    to determine which int/ext serial to use
-- board/alaska/Makefile	    Makefile
-- board/alaska/config.mk    config make
-- board/alaska/u-boot.lds   Linker description
-
-- arch/powerpc/cpu/mpc8220/dma.h	    multi-channel dma header file
-- arch/powerpc/cpu/mpc8220/dramSetup.h   dram setup header file
-- arch/powerpc/cpu/mpc8220/fec.h	    MPC8220 FEC header file
-- arch/powerpc/cpu/mpc8220/cpu.c	    cpu specific code
-- arch/powerpc/cpu/mpc8220/cpu_init.c    Flexbus ChipSelect and Mux pins setup
-- arch/powerpc/cpu/mpc8220/dramSetup.c   MPC8220 DDR SDRAM setup
-- arch/powerpc/cpu/mpc8220/fec.c	    MPC8220 FEC driver
-- arch/powerpc/cpu/mpc8220/i2c.c	    MPC8220 I2C driver
-- arch/powerpc/cpu/mpc8220/interrupts.c  interrupt support (not enable)
-- arch/powerpc/cpu/mpc8220/loadtask.c    load dma
-- arch/powerpc/cpu/mpc8220/speed.c	    system, pci, flexbus, pev, and cpu clock
-- arch/powerpc/cpu/mpc8220/traps.c	    exception
-- arch/powerpc/cpu/mpc8220/uart.c	    MPC8220 UART driver
-- arch/powerpc/cpu/mpc8220/Makefile	    Makefile
-- arch/powerpc/cpu/mpc8220/config.mk	    config make
-- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- arch/powerpc/cpu/mpc8220/io.S	    io functions
-- arch/powerpc/cpu/mpc8220/start.S	    start up
-
-- include/mpc8220.h
-
-- include/asm-ppc/immap_8220.h
-
-- include/configs/Alaska8220.h
-
-
-1. SWITCH SETTINGS
-==================
-1.1 SW1: 0 - Boot from Socket Flash (AMD) or 1 - Onboard Flash (INTEL)
-    SW2: 0 - Select MPC8220 UART or 1 - Debug Card UART
-    SW3: unsed
-    SW4: 0 - 1284 or 1 - FEC1
-    SW5: 0 - PEV or 1 - FEC2
-
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
-     linux kernel, you can customize it based on your system requirements:
-      DDR:	    0x00000000-0x1fffffff (max 512MB)
-      MBAR:	    0xf0000000-0xf0027fff (128KB)
-      CPLD:	    0xf1000000-0xf103ffff (256KB)
-      FPGA:	    0xf2000000-0xf203ffff (256KB)
-      Flash:	    0xfe000000-0xffffffff (max 32MB)
-
-3. DEFINITIONS AND COMPILATION
-==============================
-3.1 Explanation on NEW definitions in include/configs/alaska8220.h
-    CONFIG_MPC8220	    MPC8220 specific
-    CONFIG_ALASKA8220	    Alaska board specific
-    CONFIG_SYS_MPC8220_CLKIN	    Define Alaska Input Clock
-    CONFIG_PSC_CONSOLE	    Enable MPC8220 UART
-    CONFIG_EXTUART_CONSOLE  Enable External 16552 UART
-    CONFIG_SYS_AMD_BOOT	    To determine the u-boot is booted from AMD or Intel
-    CONFIG_SYS_MBAR		    MBAR base address
-    CONFIG_SYS_DEFAULT_MBAR	    Reset MBAR base address
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1-1-x
-   make distclean
-   make Alaska8220_config
-   make
-
-
-4. SCREEN DUMP
-==============
-4.1 Alaska MPC8220 board
-    Boot from AMD (NOTE: May not show exactly the same)
-
-U-Boot 1.1.1 (Sep 22 2004 - 22:14:41)
-
-CPU:   MPC8220 (JTAG ID 1640301d) at 300 MHz
-       Bus 120 MHz, CPU 300 MHz, PCI 30 MHz, VCO 480 MHz
-Board: Alaska MPC8220 Evaluation Board
-I2C:   93 kHz, ready
-DRAM:  256 MB
-Reserving 167k for U-Boot at: 0ffd6000
-FLASH: 16.5 MB
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   FEC ETHERNET
-=> flinfo
-
-Bank # 1: INTEL 28F128J3A
-  Size: 8 MB in 64 Sectors
-  Sector Start Addresses:
-    FE000000	  FE020000	FE040000      FE060000	    FE080000
-    FE0A0000	  FE0C0000	FE0E0000      FE100000	    FE120000
-    FE140000	  FE160000	FE180000      FE1A0000	    FE1C0000
-    FE1E0000	  FE200000	FE220000      FE240000	    FE260000
-    FE280000	  FE2A0000	FE2C0000      FE2E0000	    FE300000
-    FE320000	  FE340000	FE360000      FE380000	    FE3A0000
-    FE3C0000	  FE3E0000	FE400000      FE420000	    FE440000
-    FE460000	  FE480000	FE4A0000      FE4C0000	    FE4E0000
-    FE500000	  FE520000	FE540000      FE560000	    FE580000
-    FE5A0000	  FE5C0000	FE5E0000      FE600000	    FE620000
-    FE640000	  FE660000	FE680000      FE6A0000	    FE6C0000
-    FE6E0000	  FE700000	FE720000      FE740000	    FE760000
-    FE780000	  FE7A0000	FE7C0000      FE7E0000
-
-Bank # 2: INTEL 28F128J3A
-  Size: 8 MB in 64 Sectors
-  Sector Start Addresses:
-    FE800000	  FE820000	FE840000      FE860000	    FE880000
-    FE8A0000	  FE8C0000	FE8E0000      FE900000	    FE920000
-    FE940000	  FE960000	FE980000      FE9A0000	    FE9C0000
-    FE9E0000	  FEA00000	FEA20000      FEA40000	    FEA60000
-    FEA80000	  FEAA0000	FEAC0000      FEAE0000	    FEB00000
-    FEB20000	  FEB40000	FEB60000      FEB80000	    FEBA0000
-    FEBC0000	  FEBE0000	FEC00000      FEC20000	    FEC40000
-    FEC60000	  FEC80000	FECA0000      FECC0000	    FECE0000
-    FED00000	  FED20000	FED40000      FED60000	    FED80000
-    FEDA0000	  FEDC0000	FEDE0000      FEE00000	    FEE20000
-    FEE40000	  FEE60000	FEE80000      FEEA0000	    FEEC0000
-    FEEE0000	  FEF00000 (RO) FEF20000 (RO) FEF40000	    FEF60000
-    FEF80000	  FEFA0000	FEFC0000      FEFE0000 (RO)
-
-Bank # 3: AMD AMD29F040B
-  Size: 0 MB in 7 Sectors
-  Sector Start Addresses:
-    FFF00000 (RO) FFF10000 (RO) FFF20000 (RO) FFF30000	    FFF40000
-    FFF50000	  FFF60000
-
-Bank # 4: AMD AMD29F040B
-  Size: 0 MB in 1 Sectors
-  Sector Start Addresses:
-    FFF70000 (RO)
-=> bdinfo
-
-memstart    = 0xF0009800
-memsize	    = 0x10000000
-flashstart  = 0xFFF00000
-flashsize   = 0x01080000
-flashoffset = 0x00025000
-sramstart   = 0xF0020000
-sramsize    = 0x00008000
-bootflags   = 0x00000001
-intfreq	    =	 300 MHz
-busfreq	    =	 120 MHz
-inpfreq	    =	  30 MHz
-flbfreq	    =	  30 MHz
-pcifreq	    =	  30 MHz
-vcofreq	    =	 480 MHz
-pevfreq	    =	  81 MHz
-ethaddr	    = 00:E0:0C:BC:E0:60
-eth1addr    = 00:E0:0C:BC:E0:61
-IP addr	    = 192.162.1.2
-baudrate    = 115200 bps
-=> printenv
-bootargs=root=/dev/ram rw
-bootdelay=5
-baudrate=115200
-ethaddr=00:e0:0c:bc:e0:60
-eth1addr=00:e0:0c:bc:e0:61
-ipaddr=192.162.1.2
-serverip=192.162.1.1
-gatewayip=192.162.1.1
-netmask=255.255.255.0
-hostname=Alaska
-stdin=serial
-stdout=serial
-stderr=serial
-ethact=FEC ETHERNET
-
-Environment size: 268/65532 bytes
-=> setenv ipaddr 192.160.1.2
-=> setenv serverip 192.160.1.1
-=> setenv gatewayip 192.160.1.1
-=> saveenv
-Saving Environment to Flash...
-
-.
-Un-Protected 1 sectors
-Erasing Flash...
-Erasing sector	0 ...  done
-Erased 1 sectors
-Writing to Flash... done
-
-.
-Protected 1 sectors
-=> tftp 0x10000 linux.elf
-Using FEC ETHERNET device
-TFTP from server 192.160.1.1; our IP address is 192.160.1.2; sending through gateway 192.160.1.1
-Filename 'linux.elf'.
-Load address: 0x10000
-Loading: invalid RARP header
-#################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 #################################################################
-	 ##################################################
-done
-Bytes transferred = 2917494 (2c8476 hex)
-=> bootelf
-Loading .text @ 0x00a00000 (23820 bytes)
-Loading .data @ 0x00a06000 (2752512 bytes)
-Clearing .bss @ 0x00ca6000 (12764 bytes)
-## Starting application at 0x00a00000 ...
-
-Collect some entropy from RAM........done
-loaded at:     00A00000 00CA91DC
-zimage at:     00A06A93 00AD7756
-initrd at:     00AD8000 00CA5565
-avail ram:     00CAA000 014AA000
-
-Linux/PPC load: ip=off console=ttyS0,115200
-Uncompressing Linux...done.
-Now booting the kernel
-Total memory in system: 256 MB
-Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb
-Linux version 2.4.21-rc1 (r61688@bluesocks.sps.mot.com) (gcc version 3.3.1) #17 Wed Sep 8 11:49:16 CDT 2004
-Motorola Alaska port (C) 2003 Motorola, Inc.
-CPLD rev 3
-CPLD switches 0x1b
-Set Pin Mux for FEC1
-Set Pin Mux for FEC2
-Alaska Pin Multiplexing:
-Port Configuration Register 0 = 0
-Port Configuration Register 1 = 0
-Port Configuration Register 2 = 0
-Port Configuration Register 3 = 50000000
-Port Configuration Register 3 - PCI = 51400180
-Setup Alaska FPGA PIC:
-Interrupt Enable Register *(u32) = 0
-Interrupt Status Register = 2f0000
-Interrupt Enable Register in_be32 = 0
-Interrupt Status Register = 2f0000
-Interrupt Enable Register in_le32 = 0
-Interrupt Status Register = 2f00
-Interrupt Enable Register readl = 0
-Interrupt Status Register = 2f00
-Interrupt Enable Register = 0
-Interrupt Status Register = 2f0000
-Setup Alaska PCI Controller:
-On node 0 totalpages: 65536
-zone(0): 65536 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: ip=off console=ttyS0,115200
-Using XLB clock (120.00 MHz) to set up decrementer
-Calibrating delay loop... 199.88 BogoMIPS
-Memory: 254792k available (1476k kernel code, 708k data, 228k init, 0k highmem)
-Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
-Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
-Mount cache hash table entries: 512 (order: 0, 4096 bytes)
-Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
-Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
-POSIX conformance testing by UNIFIX
-PCI: Probing PCI hardware
-PCI: (pcibios_init) Global-Hose = 0xc029d000
-Scanning bus 00
-Fixups for bus 00
-Bus scan for 00 returning with max=00
-PCI: (pcibios_init) finished pci_scan_bus(hose->first_busno = 0, hose->ops = c01a1a74, hose = c029d000)
-PCI: (pcibios_init) PCI Bus Count = 0 =?= Next Bus# = 1
-PCI: (pcibios_init@pci_fixup_irqs) finished machine dependent PCI interrupt routing!
-PCI: bridge rsrc 81000000..81ffffff (100), parent c01a7f88
-PCI: bridge rsrc 84000000..87ffffff (200), parent c01a7fa4
-PCI: (pcibios_init) finished allocating and assigning resources!
-initDma!
-Using 90 DMA buffer descriptors
-descUsed f0023600, descriptors f002360c freeSram f0024140
-unmask SDMA tasks: 0xf0008018 = 0x6f000000
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-Journalled Block Device driver loaded
-JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
-JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
-pty: 256 Unix98 ptys configured
-tracek: Copyright (C) Motorola, 2003.
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-ttyS00 at 0xf1001008 (irq = 73) is a ST16650
-ttyS01 at 0xf1001010 (irq = 74) is a ST16650
-elp-fpanel: Copyright (C) Motorola, 2003.
-fpanel: fpanelWait timeout
-elp-engine: Copyright (C) Motorola, 2003.
-Video disabled due to configuration switch 4
-Alpine 1284 driver: Copyright (C) Motorola, 2003.
-1284 disabled due to configuration switch 5
-Alpine USB driver: Copyright (C) Motorola, 2003.
-OK
-USB: Descriptor download completed OK
-enable_irq(41) unbalanced
-enable_irq(75) unbalanced
-elp-dmaram: Copyright (C) Motorola, 2003.
-Total memory in system: 256 MB
-elp_dmaram: offset is 0x10000000, size is 0
-Xicor NVRAM driver: Copyright (C) Motorola, 2003.
-elp-video: Copyright (C) Motorola, 2003.
-Video disabled due to configuration switch 4
-elp-pfm: Copyright (C) Motorola, 2003.
-paddle: Copyright (C) Motorola, 2001, present.
-RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
-loop: loaded (max 8 devices)
-PPP generic driver version 2.4.2
-PPP Deflate Compression module registered
-Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
-ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
-init_alaska_mtd: chip probing count 0
-cfi_cmdset_0001: Erase suspend on write enabled
-Using buffer write method
-init_alaska_mtd: bank1, name:ALASKA0, size:16777216bytes
-ALASKA flash0: Using Static image partition definition
-Creating 3 MTD partitions on "ALASKA0":
-0x00000000-0x00280000 : "kernel"
-0x00280000-0x00fe0000 : "user"
-0x00fe0000-0x01000000 : "signature"
-mgt_fec_module_init
-mgt_fec_init()
-mgt_fec_init
-mgt_init_fec_dev(0xc05f6000,0)
-dev c05f6000 fec_priv c05f6160 fec f0009000
-mgt_init_fec_dev(0xc05f6800,1)
-dev c05f6800 fec_priv c05f6960 fec f0009800
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 2048 buckets, 16Kbytes
-TCP: Hash tables configured (established 16384 bind 32768)
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-RAMDISK: Compressed image found at block 0
-Freeing initrd memory: 1845k freed
-JFFS: Trying to mount a non-mtd device.
-VFS: Mounted root (romfs filesystem) readonly.
-Freeing unused kernel memory: 228k init
-INIT: version 2.78 booting
-INIT: Entering runlevel: 1
-"Space, a great big place of unknown stuff."  -Dexter, for our MotD.
-[01/Jan/1970:00:00:01 +0000] boa: server version Boa/0.94.8.3
-[01/Jan/1970:00:00:01 +0000] boa: server built Sep  7 2004 at 17:40:55.
-[01/Jan/1970:00:00:01 +0000] boa: starting server pid=28, port 80
-Mounting flash filesystem, will take a minute...
-/etc/rc: line 30: /dev/lp0: No such devish-2.05b#
-sh-2.05b# ifup eth0
-client (v0.9.9-pre) started
-adapter index 2
-adapter hardware address 00:e0:0c:bc:e0:60
-execle'ing /usr/share/udhcpc/default.script
-/sbin/ifconfig eth0
-eth0	  Link encap:Ethernet  HWaddr 00:E0:0C:BC:E0:60
-	  BROADCAST MULTICAST  MTU:1500	 Metric:1
-	 mgt_fec_open
- Rfec request irq
-X fec_open: rcv_ring_size 8, xmt_ring_size 8
-packmgt_fec_open(): call netif_start_queue()
-ets:0 errors:0 dropped:0 overruns:0 frame:0
-	  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
-	  collisions:0 txqueuelen:100
-	  RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
-	  Base address:0x9000
-
-/sbin/ifconfig eth0 up
-entering raw listen mode
-Opening raw socket on ifindex 2
-adding option 0x35
-adding option 0x3d
-adding option 0x3c
-Sending discover...
-Waiting on select...
-unrelated/bogus packet
-Waiting on select...
-oooooh!!! got some!
-adding option 0x35
-adding option 0x3d
-adding option 0x3c
-adding option 0x32
-adding option 0x36
-Sending select for 163.12.48.146...
-Waiting on select...
-oooooh!!! got some!
-Waiting on select...
-oooooh!!! got some!
-Lease of 163.12.48.146 obtained, lease time 345600
-execle'ing /usr/share/udhcpc/default.script
-/sbin/ifconfig eth0 163.12.48.146 netmask 255.255.254.0
-/sbin/ifconfig eth0 up
-deleting routers
-/sbin/route del default
-/sbin/route add default gw 163.12.49.254 dev eth0
-adding dns 163.12.252.230
-adding dns 192.55.22.4
-adding dns 192.5.249.4
-entering none listen mode
-sh-2.05b#
-
-5. REPROGRAM U-BOOT
-===================
-5.1 Reprogram u-boot (boot from AMD)
-    1. Unprotect the boot sector
-    => protect off bank 3
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfff00000 0xfff6ffff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfff00000
-    5. Reset for the new u-boot to take place
-    => reset
-
-5.2 Reprogram u-boot (boot from AMD program at INTEL)
-    1. Unprotect the boot sector
-    => protect off bank 2
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfef00000 0xfefdffff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfef00000
-    5. Reset for the new u-boot to take place
-    => reset
-
-5.3 Reprogram u-boot (boot from INTEL)
-    1. Unprotect the boot sector
-    => protect off bank 4
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfff00000 0xfffdffff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfff00000
-    5. Reset for the new u-boot to take place
-    => reset
-
-5.4 Reprogram u-boot (boot from INTEL program at AMD)
-    1. Unprotect the boot sector
-    => protect off bank 1
-    2. Download new u-boot binary file
-    => tftp 0x10000 u-boot.bin
-    3. Erase bootsector (max 7 sectors)
-    => erase 0xfe080000 0xfe0effff
-    4. Program the u-boot to flash
-    => cp.b 0x10000 0xfe080000
-    5. Reset for the new u-boot to take place
-    => reset
diff --git a/board/alaska/alaska.c b/board/alaska/alaska.c
deleted file mode 100644
index 89c1abd2336..00000000000
--- a/board/alaska/alaska.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale Inc.
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-
-void setupBat (ulong size)
-{
-	ulong batu, batl;
-	int blocksize = 0;
-
-	/* Flash 0 */
-#if defined (CONFIG_SYS_AMD_BOOT)
-	batu = CONFIG_SYS_FLASH0_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
-#else
-	batu = CONFIG_SYS_FLASH0_BASE | BATU_BL_16M | BPP_RW | BPP_RX;
-#endif
-	batl = CONFIG_SYS_FLASH0_BASE | 0x22;
-	write_bat (IBAT0, batu, batl);
-	write_bat (DBAT0, batu, batl);
-
-	/* Flash 1 */
-#if defined (CONFIG_SYS_AMD_BOOT)
-	batu = CONFIG_SYS_FLASH1_BASE | BATU_BL_16M | BPP_RW | BPP_RX;
-#else
-	batu = CONFIG_SYS_FLASH1_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
-#endif
-	batl = CONFIG_SYS_FLASH1_BASE | 0x22;
-	write_bat (IBAT1, batu, batl);
-	write_bat (DBAT1, batu, batl);
-
-	/* CPLD */
-	batu = CONFIG_SYS_CPLD_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
-	batl = CONFIG_SYS_CPLD_BASE | 0x22;
-	write_bat (IBAT2, 0, 0);
-	write_bat (DBAT2, batu, batl);
-
-	/* FPGA */
-	batu = CONFIG_SYS_FPGA_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
-	batl = CONFIG_SYS_FPGA_BASE | 0x22;
-	write_bat (IBAT3, 0, 0);
-	write_bat (DBAT3, batu, batl);
-
-	/* MBAR - Data only */
-	batu = CONFIG_SYS_MBAR | BPP_RW | BPP_RX;
-	batl = CONFIG_SYS_MBAR | 0x22;
-	mtspr (IBAT4L, 0);
-	mtspr (IBAT4U, 0);
-	mtspr (DBAT4L, batl);
-	mtspr (DBAT4U, batu);
-
-	/* MBAR - SRAM */
-	batu = CONFIG_SYS_SRAM_BASE | BPP_RW | BPP_RX;
-	batl = CONFIG_SYS_SRAM_BASE | 0x42;
-	mtspr (IBAT5L, batl);
-	mtspr (IBAT5U, batu);
-	mtspr (DBAT5L, batl);
-	mtspr (DBAT5U, batu);
-
-	if (size <= 0x800000)	/* 8MB */
-		blocksize = BATU_BL_8M;
-	else if (size <= 0x1000000)	/* 16MB */
-		blocksize = BATU_BL_16M;
-	else if (size <= 0x2000000)	/* 32MB */
-		blocksize = BATU_BL_32M;
-	else if (size <= 0x4000000)	/* 64MB */
-		blocksize = BATU_BL_64M;
-	else if (size <= 0x8000000)	/* 128MB */
-		blocksize = BATU_BL_128M;
-	else if (size <= 0x10000000)	/* 256MB */
-		blocksize = BATU_BL_256M;
-
-	/* Memory */
-	batu = CONFIG_SYS_SDRAM_BASE | blocksize | BPP_RW | BPP_RX;
-	batl = CONFIG_SYS_SDRAM_BASE | 0x42;
-	mtspr (IBAT6L, batl);
-	mtspr (IBAT6U, batu);
-	mtspr (DBAT6L, batl);
-	mtspr (DBAT6U, batu);
-
-	/* memory size is less than 256MB */
-	if (size <= 0x10000000) {
-		/* Nothing */
-		batu = 0;
-		batl = 0;
-	} else {
-		size -= 0x10000000;
-		if (size <= 0x800000)	/* 8MB */
-			blocksize = BATU_BL_8M;
-		else if (size <= 0x1000000)	/* 16MB */
-			blocksize = BATU_BL_16M;
-		else if (size <= 0x2000000)	/* 32MB */
-			blocksize = BATU_BL_32M;
-		else if (size <= 0x4000000)	/* 64MB */
-			blocksize = BATU_BL_64M;
-		else if (size <= 0x8000000)	/* 128MB */
-			blocksize = BATU_BL_128M;
-		else if (size <= 0x10000000)	/* 256MB */
-			blocksize = BATU_BL_256M;
-
-		batu = (CONFIG_SYS_SDRAM_BASE +
-			0x10000000) | blocksize | BPP_RW | BPP_RX;
-		batl = (CONFIG_SYS_SDRAM_BASE + 0x10000000) | 0x42;
-	}
-
-	mtspr (IBAT7L, batl);
-	mtspr (IBAT7U, batu);
-	mtspr (DBAT7L, batl);
-	mtspr (DBAT7U, batu);
-}
-
-phys_size_t initdram (int board_type)
-{
-	ulong size;
-
-	size = dramSetup ();
-
-/* if iCache ad dCache is defined */
-#if defined(CONFIG_CMD_CACHE)
-/*    setupBat(size);*/
-#endif
-
-	return size;
-}
-
-int checkboard (void)
-{
-	puts ("Board: Alaska MPC8220 Evaluation Board\n");
-
-	return 0;
-}
diff --git a/board/alaska/flash.c b/board/alaska/flash.c
deleted file mode 100644
index 977822ac51e..00000000000
--- a/board/alaska/flash.c
+++ /dev/null
@@ -1,945 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH8
-
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-
-#define SWAP(x)         (x)
-
-/* Intel-compatible flash ID */
-#define INTEL_COMPAT    0x89
-#define INTEL_ALT       0xB0
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM   0x10
-#define INTEL_ERASE     0x20
-#define INTEL_CLEAR     0x50
-#define INTEL_LOCKBIT   0x60
-#define INTEL_PROTECT   0x01
-#define INTEL_STATUS    0x70
-#define INTEL_READID    0x90
-#define INTEL_CONFIRM   0xD0
-#define INTEL_RESET     0xFF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED  0x80
-#define INTEL_OK        0x80
-
-#define FPW             FLASH_PORT_WIDTH
-#define FPWV            FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1    0x0555
-#define FLASH_CYCLE2    0x02aa
-
-#define WR_BLOCK        0x20
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static int write_data_block (flash_info_t * info, ulong src, ulong dest);
-static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-static void flash_sync_real_protect (flash_info_t * info);
-static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
-static unsigned char same_chip_banks (int bank1, int bank2);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-	ulong fsize = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		memset (&flash_info[i], 0, sizeof (flash_info_t));
-
-		switch (i) {
-		case 0:
-			flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
-					&flash_info[i]);
-			flash_get_offsets (CONFIG_SYS_FLASH1_BASE, &flash_info[i]);
-			break;
-		case 1:
-			flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
-					&flash_info[i]);
-			fsize = CONFIG_SYS_FLASH1_BASE + flash_info[i - 1].size;
-			flash_get_offsets (fsize, &flash_info[i]);
-			break;
-		case 2:
-			flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
-					&flash_info[i]);
-			flash_get_offsets (CONFIG_SYS_FLASH0_BASE, &flash_info[i]);
-			break;
-		case 3:
-			flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
-					&flash_info[i]);
-			fsize = CONFIG_SYS_FLASH0_BASE + flash_info[i - 1].size;
-			flash_get_offsets (fsize, &flash_info[i]);
-			break;
-		default:
-			panic ("configured to many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-
-		/* get the h/w and s/w protection status in sync */
-		flash_sync_real_protect(&flash_info[i]);
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-#if defined (CONFIG_SYS_AMD_BOOT)
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_MONITOR_BASE,
-		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-		       &flash_info[2]);
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_INTEL_BASE,
-		       CONFIG_SYS_INTEL_BASE + monitor_flash_len - 1,
-		       &flash_info[1]);
-#else
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_MONITOR_BASE,
-		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-		       &flash_info[3]);
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_AMD_BASE,
-		       CONFIG_SYS_AMD_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV1_ADDR,
-		       CONFIG_ENV1_ADDR + CONFIG_ENV1_SIZE - 1, &flash_info[1]);
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV_ADDR,
-		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[3]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_AMD_SECT_SIZE);
-			info->protect[i] = 0;
-		}
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * PHYS_INTEL_SECT_SIZE);
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	case FLASH_MAN_AMD:
-		printf ("AMD ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		printf ("28F128J3A\n");
-		break;
-
-	case FLASH_AM040:
-		printf ("AMD29F040B\n");
-		break;
-
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
-	FPWV value;
-	static int amd = 0;
-
-	/* Write auto select command: read Manufacturer ID */
-	/* Write auto select command sequence and test FLASH answer */
-	addr[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* for AMD, Intel ignores this */
-	__asm__ ("sync");
-	addr[FLASH_CYCLE2] = (FPW) 0x00550055;	/* for AMD, Intel ignores this */
-	__asm__ ("sync");
-	addr[FLASH_CYCLE1] = (FPW) 0x00900090;	/* selects Intel or AMD */
-	__asm__ ("sync");
-
-	udelay (100);
-
-	switch (addr[0] & 0xff) {
-
-	case (uchar) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		value = addr[1];
-		break;
-
-	case (uchar) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		value = addr[2];
-		break;
-
-	default:
-		printf ("unknown\n");
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);	/* no or unknown flash  */
-	}
-
-	switch (value) {
-
-	case (FPW) INTEL_ID_28F128J3A:
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 64;
-		info->size = 0x00800000;	/* => 16 MB     */
-		break;
-
-	case (FPW) AMD_ID_LV040B:
-		info->flash_id += FLASH_AM040;
-		if (amd == 0) {
-			info->sector_count = 7;
-			info->size = 0x00070000;	/* => 448 KB     */
-			amd = 1;
-		} else {
-			/* for Environment settings */
-			info->sector_count = 1;
-			info->size = PHYS_AMD_SECT_SIZE;	/* => 64 KB     */
-			amd = 0;
-		}
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	if (value == (FPW) INTEL_ID_28F128J3A)
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-	else
-		addr[0] = (FPW) 0x00F000F0;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/*
- * This function gets the u-boot flash sector protection status
- * (flash_info_t.protect[]) in sync with the sector protection
- * status stored in hardware.
- */
-static void flash_sync_real_protect (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F128J3A:
-		for (i = 0; i < info->sector_count; ++i) {
-			info->protect[i] = intel_sector_protected(info, i);
-		}
-		break;
-	case FLASH_AM040:
-	default:
-		/* no h/w protect support */
-		break;
-	}
-}
-
-
-/*
- * checks if "sector" in bank "info" is protected. Should work on intel
- * strata flash chips 28FxxxJ3x in 8-bit mode.
- * Returns 1 if sector is protected (or timed-out while trying to read
- * protection status), 0 if it is not.
- */
-static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
-{
-	FPWV *addr;
-	FPWV *lock_conf_addr;
-	ulong start;
-	unsigned char ret;
-
-	/*
-	 * first, wait for the WSM to be finished. The rationale for
-	 * waiting for the WSM to become idle for at most
-	 * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
-	 * because of: (1) erase, (2) program or (3) lock bit
-	 * configuration. So we just wait for the longest timeout of
-	 * the (1)-(3), i.e. the erase timeout.
-	 */
-
-	/* wait at least 35ns (W12) before issuing Read Status Register */
-	udelay(1);
-	addr = (FPWV *) info->start[sector];
-	*addr = (FPW) INTEL_STATUS;
-
-	start = get_timer (0);
-	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			*addr = (FPW) INTEL_RESET; /* restore read mode */
-			printf("WSM busy too long, can't get prot status\n");
-			return 1;
-		}
-	}
-
-	/* issue the Read Identifier Codes command */
-	*addr = (FPW) INTEL_READID;
-
-	/* wait at least 35ns (W12) before reading */
-	udelay(1);
-
-	/* Intel example code uses offset of 4 for 8-bit flash */
-	lock_conf_addr = (FPWV *) info->start[sector] + 4;
-	ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
-
-	/* put flash back in read mode */
-	*addr = (FPW) INTEL_RESET;
-
-	return ret;
-}
-
-
-/*
- * Checks if "bank1" and "bank2" are on the same chip.  Returns 1 if they
- * are and 0 otherwise.
- */
-static unsigned char same_chip_banks (int bank1, int bank2)
-{
-	unsigned char same_chip[CONFIG_SYS_MAX_FLASH_BANKS][CONFIG_SYS_MAX_FLASH_BANKS] = {
-		{1, 1, 0, 0},
-		{1, 1, 0, 0},
-		{0, 0, 1, 1},
-		{0, 0, 1, 1}
-	};
-	return same_chip[bank1][bank2];
-}
-
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start;
-	int rcode = 0, intel = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf ("- missing\n");
-		else
-			printf ("- no sectors to erase\n");
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		type = (info->flash_id & FLASH_VENDMASK);
-		if ((type != FLASH_MAN_AMD)) {
-			printf ("Can't erase unknown flash type %08lx - aborted\n",
-				info->flash_id);
-			return 1;
-		}
-	}
-
-	if (type == FLASH_MAN_INTEL)
-		intel = 1;
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer (0);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			/* arm simple, non interrupt dependent timer */
-			start = get_timer (0);
-
-			if (intel) {
-				*addr = (FPW) 0x00500050;	/* clear status register */
-				*addr = (FPW) 0x00200020;	/* erase setup */
-				*addr = (FPW) 0x00D000D0;	/* erase confirm */
-			} else {
-				FPWV *base;	/* first address in bank */
-
-				base = (FPWV *) (CONFIG_SYS_AMD_BASE);
-				base[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* unlock */
-				base[FLASH_CYCLE2] = (FPW) 0x00550055;	/* unlock */
-				base[FLASH_CYCLE1] = (FPW) 0x00800080;	/* erase mode */
-				base[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* unlock */
-				base[FLASH_CYCLE2] = (FPW) 0x00550055;	/* unlock */
-				*addr = (FPW) 0x00300030;	/* erase sector */
-			}
-
-			while (((status =
-				 *addr) & (FPW) 0x00800080) !=
-			       (FPW) 0x00800080) {
-				if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					if (intel) {
-						*addr = (FPW) 0x00B000B0;	/* suspend erase     */
-						*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
-					} else
-						*addr = (FPW) 0x00F000F0;	/* reset to read mode */
-
-					rcode = 1;
-					break;
-				}
-			}
-
-			if (intel) {
-				*addr = (FPW) 0x00500050;	/* clear status register cmd.   */
-				*addr = (FPW) 0x00FF00FF;	/* resest to read mode          */
-			} else
-				*addr = (FPW) 0x00F000F0;	/* reset to read mode */
-
-			printf (" done\n");
-		}
-	}
-	if (flag)
-		enable_interrupts();
-
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-	    {
-		FPW data = 0;	/* 16 or 32 bit word, matches flash bus width */
-		int bytes;	/* number of bytes to program in current word */
-		int left;	/* number of bytes left to program */
-		int i, res;
-
-		for (left = cnt, res = 0;
-		     left > 0 && res == 0;
-		     addr += sizeof (data), left -=
-		     sizeof (data) - bytes) {
-
-			bytes = addr & (sizeof (data) - 1);
-			addr &= ~(sizeof (data) - 1);
-
-			/* combine source and destination data so can program
-			 * an entire word of 16 or 32 bits
-			 */
-			for (i = 0; i < sizeof (data); i++) {
-				data <<= 8;
-				if (i < bytes || i - bytes >= left)
-					data += *((uchar *) addr + i);
-				else
-					data += *src++;
-			}
-
-			res = write_word_amd (info, (FPWV *) addr,
-					      data);
-		}
-		return res;
-	    }		/* case FLASH_MAN_AMD */
-
-	case FLASH_MAN_INTEL:
-	    {
-		ulong cp, wp;
-		FPW data;
-		int count, i, l, rc, port_width;
-
-		/* get lower word aligned address */
-		wp = addr;
-		port_width = 1;
-
-		/*
-		 * handle unaligned start bytes
-		 */
-		if ((l = addr - wp) != 0) {
-			data = 0;
-			for (i = 0, cp = wp; i < l; ++i, ++cp) {
-				data = (data << 8) | (*(uchar *) cp);
-			}
-
-			for (; i < port_width && cnt > 0; ++i) {
-				data = (data << 8) | *src++;
-				--cnt;
-				++cp;
-			}
-
-			for (; cnt == 0 && i < port_width; ++i, ++cp)
-				data = (data << 8) | (*(uchar *) cp);
-
-			if ((rc =
-			     write_data (info, wp, SWAP (data))) != 0)
-				return (rc);
-			wp += port_width;
-		}
-
-		if (cnt > WR_BLOCK) {
-			/*
-			 * handle word aligned part
-			 */
-			count = 0;
-			while (cnt >= WR_BLOCK) {
-
-				if ((rc =
-				     write_data_block (info,
-						       (ulong) src,
-						       wp)) != 0)
-					return (rc);
-
-				wp += WR_BLOCK;
-				src += WR_BLOCK;
-				cnt -= WR_BLOCK;
-
-				if (count++ > 0x800) {
-					spin_wheel ();
-					count = 0;
-				}
-			}
-		}
-
-		if (cnt < WR_BLOCK) {
-			/*
-			 * handle word aligned part
-			 */
-			count = 0;
-			while (cnt >= port_width) {
-				data = 0;
-				for (i = 0; i < port_width; ++i)
-					data = (data << 8) | *src++;
-
-				if ((rc =
-				     write_data (info, wp,
-						 SWAP (data))) != 0)
-					return (rc);
-
-				wp += port_width;
-				cnt -= port_width;
-				if (count++ > 0x800) {
-					spin_wheel ();
-					count = 0;
-				}
-			}
-		}
-
-		if (cnt == 0)
-			return (0);
-
-		/*
-		 * handle unaligned tail bytes
-		 */
-		data = 0;
-		for (i = 0, cp = wp; i < port_width && cnt > 0;
-		     ++i, ++cp) {
-			data = (data << 8) | *src++;
-			--cnt;
-		}
-
-		for (; i < port_width; ++i, ++cp)
-			data = (data << 8) | (*(uchar *) cp);
-
-		return (write_data (info, wp, SWAP (data)));
-	    }		/* case FLASH_MAN_INTEL */
-
-	}			/* switch */
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong start;
-	int flag, rc = 0;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong)addr, (ulong)*addr);
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer (0);
-
-	/* wait while polling the status register */
-	while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rc = 1;
-			goto OUT;
-		}
-	}
-
-OUT:
-	*addr = (FPW)0x00FF00FF;	/* restore read mode */
-
-	if (flag)
-		enable_interrupts();
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data_block (flash_info_t * info, ulong src, ulong dest)
-{
-	FPWV *srcaddr = (FPWV *) src;
-	FPWV *dstaddr = (FPWV *) dest;
-	ulong start;
-	int flag, i, rc = 0;
-
-	/* Check if Flash is (sufficiently) erased */
-	for (i = 0; i < WR_BLOCK; i++)
-		if ((*dstaddr++ & 0xff) != 0xff) {
-			printf ("not erased at %08lx (%lx)\n",
-				(ulong)dstaddr, (ulong)*dstaddr);
-			return (2);
-		}
-
-	dstaddr = (FPWV *) dest;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	*dstaddr = (FPW) 0x00e800e8;	/* write block setup */
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer (0);
-
-	/* wait while polling the status register */
-	while ((*dstaddr & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			rc = 1;
-			goto OUT;
-		}
-	}
-
-	*dstaddr = (FPW) 0x001f001f;	/* write 32 to buffer */
-	for (i = 0; i < WR_BLOCK; i++)
-		*dstaddr++ = *srcaddr++;
-
-	dstaddr -= 1;
-	*dstaddr = (FPW) 0x00d000d0;	/* write 32 to buffer */
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer (0);
-
-	/* wait while polling the status register */
-	while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dstaddr = (FPW) 0x00FF00FF;	/* restore read mode */
-			return (1);
-		}
-	}
-
-OUT:
-	*dstaddr = (FPW)0x00FF00FF;	/* restore read mode */
-	if (flag)
-		enable_interrupts();
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
-{
-	ulong start;
-	int flag;
-	int res = 0;		/* result, assume success */
-	FPWV *base;		/* first address in flash bank */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-	base = (FPWV *) (CONFIG_SYS_AMD_BASE);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	base[FLASH_CYCLE1] = (FPW) 0x00AA00AA;	/* unlock */
-	base[FLASH_CYCLE2] = (FPW) 0x00550055;	/* unlock */
-	base[FLASH_CYCLE1] = (FPW) 0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data */
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	start = get_timer (0);
-
-	/* data polling for D7 */
-	while (res == 0
-	       && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dest = (FPW) 0x00F000F0;	/* reset bank */
-			res = 1;
-		}
-	}
-
-	return (res);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
-
-/*-----------------------------------------------------------------------
- * Set/Clear sector's lock bit, returns:
- * 0 - OK
- * 1 - Error (timeout, voltage problems, etc.)
- */
-int flash_real_protect (flash_info_t * info, long sector, int prot)
-{
-	ulong start;
-	int i, j;
-	int curr_bank;
-	int bank;
-	int rc = 0;
-	FPWV *addr = (FPWV *) (info->start[sector]);
-	int flag = disable_interrupts ();
-
-	/*
-	 * 29F040B AMD flash does not support software protection/unprotection,
-	 * the only way to protect the AMD flash is marked it as prot bit.
-	 * This flash only support hardware protection, by supply or not supply
-	 * 12vpp to the flash
-	 */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) {
-		info->protect[sector] = prot;
-
-		return 0;
-	}
-
-	*addr = INTEL_CLEAR;	/* Clear status register    */
-	if (prot) {		/* Set sector lock bit      */
-		*addr = INTEL_LOCKBIT;	/* Sector lock bit          */
-		*addr = INTEL_PROTECT;	/* set                      */
-	} else {		/* Clear sector lock bit    */
-		*addr = INTEL_LOCKBIT;	/* All sectors lock bits    */
-		*addr = INTEL_CONFIRM;	/* clear                    */
-	}
-
-	start = get_timer (0);
-
-	while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
-			printf ("Flash lock bit operation timed out\n");
-			rc = 1;
-			break;
-		}
-	}
-
-	if (*addr != INTEL_OK) {
-		printf ("Flash lock bit operation failed at %08X, CSR=%08X\n",
-			(uint) addr, (uint) * addr);
-		rc = 1;
-	}
-
-	if (!rc)
-		info->protect[sector] = prot;
-
-	/*
-	 * Clear lock bit command clears all sectors lock bits, so
-	 * we have to restore lock bits of protected sectors.
-	 */
-	if (!prot) {
-		/*
-		 * re-locking must be done for all banks that belong on one
-		 * FLASH chip, as all the sectors on the chip were unlocked
-		 * by INTEL_LOCKBIT/INTEL_CONFIRM commands. (let's hope
-		 * that banks never span chips, in particular chips which
-		 * support h/w protection differently).
-		 */
-
-		/* find the current bank number */
-		curr_bank = CONFIG_SYS_MAX_FLASH_BANKS + 1;
-		for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; ++j) {
-			if (&flash_info[j] == info) {
-				curr_bank = j;
-			}
-		}
-		if (curr_bank == CONFIG_SYS_MAX_FLASH_BANKS + 1) {
-			printf("Error: can't determine bank number!\n");
-		}
-
-		for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
-			if (!same_chip_banks(curr_bank, bank)) {
-				continue;
-			}
-			info = &flash_info[bank];
-			for (i = 0; i < info->sector_count; i++) {
-				if (info->protect[i]) {
-					start = get_timer (0);
-					addr = (FPWV *) (info->start[i]);
-					*addr = INTEL_LOCKBIT;	/* Sector lock bit  */
-					*addr = INTEL_PROTECT;	/* set              */
-					while ((*addr & INTEL_FINISHED) !=
-					       INTEL_FINISHED) {
-						if (get_timer (start) >
-						    CONFIG_SYS_FLASH_UNLOCK_TOUT) {
-							printf ("Flash lock bit operation timed out\n");
-							rc = 1;
-							break;
-						}
-					}
-				}
-			}
-		}
-
-		/*
-		 * get the s/w sector protection status in sync with the h/w,
-		 * in case something went wrong during the re-locking.
-		 */
-		flash_sync_real_protect(info); /* resets flash to read  mode */
-	}
-
-	if (flag)
-		enable_interrupts ();
-
-	*addr = INTEL_RESET;	/* Reset to read array mode */
-
-	return rc;
-}
diff --git a/board/sorcery/Makefile b/board/sorcery/Makefile
deleted file mode 100644
index e1752e3fa3e..00000000000
--- a/board/sorcery/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2005-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= $(BOARD).o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c
deleted file mode 100644
index 90d4298020d..00000000000
--- a/board/sorcery/sorcery.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale Inc.
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <pci.h>
-#include <netdev.h>
-
-phys_size_t initdram (int board_type)
-{
-	ulong size;
-
-	size = dramSetup ();
-
-	return get_ram_size(CONFIG_SYS_SDRAM_BASE, size);
-}
-
-int checkboard (void)
-{
-	puts ("Board: Sorcery-C MPC8220\n");
-
-	return 0;
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI devices, report devices found.
- */
-static struct pci_controller hose;
-
-#endif /* CONFIG_PCI */
-
-void pci_init_board (void)
-{
-#ifdef CONFIG_PCI
-	extern void pci_mpc8220_init (struct pci_controller *hose);
-	pci_mpc8220_init (&hose);
-#endif /* CONFIG_PCI */
-}
-
-int board_eth_init(bd_t *bis)
-{
-	/* Initialize built-in FEC first */
-	cpu_eth_init(bis);
-	return pci_eth_init(bis);
-}
diff --git a/boards.cfg b/boards.cfg
index 5d780649796..403f4c3f679 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -588,9 +588,6 @@ TQM5200_B_HIGHBOOT           powerpc     mpc5xxx     tqm5200             tqc
 TQM5200S                     powerpc     mpc5xxx     tqm5200             tqc            -           TQM5200:TQM5200_B,TQM5200S
 TQM5200S_HIGHBOOT            powerpc     mpc5xxx     tqm5200             tqc            -           TQM5200:TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000
 TQM5200_STK100               powerpc     mpc5xxx     tqm5200             tqc            -           TQM5200:STK52XX_REV100
-Alaska8220                   powerpc     mpc8220     alaska
-sorcery                      powerpc     mpc8220
-Yukon8220                    powerpc     mpc8220     alaska
 A3000                        powerpc     mpc824x     a3000
 CPC45                        powerpc     mpc824x     cpc45               -              -           CPC45
 CPC45_ROMBOOT                powerpc     mpc824x     cpc45               -              -           CPC45:BOOT_ROM
diff --git a/common/board_f.c b/common/board_f.c
index 32e59faa027..81edbdf8e45 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -667,27 +667,6 @@ static int setup_board_part1(void)
 #if defined(CONFIG_MPC83xx)
 	bd->bi_immrbar = CONFIG_SYS_IMMR;
 #endif
-#if defined(CONFIG_MPC8220)
-	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
-	bd->bi_inpfreq = gd->arch.inp_clk;
-	bd->bi_pcifreq = gd->pci_clk;
-	bd->bi_vcofreq = gd->arch.vco_clk;
-	bd->bi_pevfreq = gd->arch.pev_clk;
-	bd->bi_flbfreq = gd->arch.flb_clk;
-
-	/* store bootparam to sram (backward compatible), here? */
-	{
-		u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE;
-
-		*sram++ = gd->ram_size;
-		*sram++ = gd->bus_clk;
-		*sram++ = gd->arch.inp_clk;
-		*sram++ = gd->cpu_clk;
-		*sram++ = gd->arch.vco_clk;
-		*sram++ = gd->arch.flb_clk;
-		*sram++ = 0xb8c3ba11;	/* boot signature */
-	}
-#endif
 
 	return 0;
 }
@@ -921,9 +900,6 @@ static init_fnc_t init_sequence_f[] = {
 #if defined(CONFIG_MPC5xxx)
 	prt_mpc5xxx_clks,
 #endif /* CONFIG_MPC5xxx */
-#if defined(CONFIG_MPC8220)
-	prt_mpc8220_clks,
-#endif
 #if defined(CONFIG_DISPLAY_BOARDINFO)
 	checkboard,		/* display board info */
 #endif
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 85279d5e7b8..78e0bf6a3c5 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -130,13 +130,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #endif
 	print_mhz("busfreq",		bd->bi_busfreq);
 #endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */
-#if defined(CONFIG_MPC8220)
-	print_mhz("inpfreq",		bd->bi_inpfreq);
-	print_mhz("flbfreq",		bd->bi_flbfreq);
-	print_mhz("pcifreq",		bd->bi_pcifreq);
-	print_mhz("vcofreq",		bd->bi_vcofreq);
-	print_mhz("pevfreq",		bd->bi_pevfreq);
-#endif
 
 #ifdef CONFIG_ENABLE_36BIT_PHYS
 #ifdef CONFIG_PHYS_64BIT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 48c7e4a96a1..9223f6e4362 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,9 @@ easily if here is something they might want to dig for...
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+Alaska8220       powerpc     mpc8220        -           -
+Yukon8220        powerpc     mpc8220        -           -
+sorcery          powerpc     mpc8220        -           -
 smdk6400         arm         arm1176        52587f1	2013-04-12  Zhong Hongbo <bocui107@gmail.com>
 ns9750dev        arm         arm926ejs      4cfc611	2013-02-28  Markus Pietrek <mpietrek@fsforth.de>
 AMX860           powerpc     mpc860         1b0757e     2012-10-28  Wolfgang Denk <wd@denx.de>
diff --git a/doc/driver-model/UDM-pci.txt b/doc/driver-model/UDM-pci.txt
index c2cf2d5a626..6a592b33688 100644
--- a/doc/driver-model/UDM-pci.txt
+++ b/doc/driver-model/UDM-pci.txt
@@ -201,11 +201,7 @@ III) Analysis of in-tree drivers
     -----------------------------
       Standard driver, uses indirect functions.
 
-    12) powerpc/cpu/mpc8220/pci.c
-    -----------------------------
-      Standard driver, specifies all read/write functions separately.
-
-    13) powerpc/cpu/mpc85xx/pci.c
+    12) powerpc/cpu/mpc85xx/pci.c
     -----------------------------
       Standard driver, uses indirect functions, has two busses.
 
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 9f046435518..daa80038a71 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -143,7 +143,6 @@ serial_initfunc(au1x00_serial_initialize);
 serial_initfunc(asc_serial_initialize);
 serial_initfunc(jz_serial_initialize);
 serial_initfunc(mpc5xx_serial_initialize);
-serial_initfunc(mpc8220_serial_initialize);
 serial_initfunc(mpc8260_scc_serial_initialize);
 serial_initfunc(mpc8260_smc_serial_initialize);
 serial_initfunc(mpc85xx_serial_initialize);
@@ -236,7 +235,6 @@ void serial_initialize(void)
 	asc_serial_initialize();
 	jz_serial_initialize();
 	mpc5xx_serial_initialize();
-	mpc8220_serial_initialize();
 	mpc8260_scc_serial_initialize();
 	mpc8260_smc_serial_initialize();
 	mpc85xx_serial_initialize();
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index a9aa8baf0dc..a4bfdac18e0 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -60,14 +60,6 @@ typedef struct bd_info {
 #endif
 #if defined(CONFIG_MPC83xx)
 	unsigned long	bi_immrbar;
-#endif
-#if defined(CONFIG_MPC8220)
-	unsigned long	bi_mbar_base;	/* base of internal registers */
-	unsigned long   bi_inpfreq;     /* Input Freq, In MHz */
-	unsigned long   bi_pcifreq;     /* PCI Freq, in MHz */
-	unsigned long   bi_pevfreq;     /* PEV Freq, in MHz */
-	unsigned long   bi_flbfreq;     /* Flexbus Freq, in MHz */
-	unsigned long   bi_vcofreq;     /* VCO Freq, in MHz */
 #endif
 	unsigned long	bi_bootflags;	/* boot / reboot flag (Unused) */
 	unsigned long	bi_ip_addr;	/* IP Address */
diff --git a/include/common.h b/include/common.h
index 2d645c23b42..e682bd82377 100644
--- a/include/common.h
+++ b/include/common.h
@@ -71,8 +71,6 @@ typedef volatile unsigned char	vu_char;
 #include <mpc5xxx.h>
 #elif defined(CONFIG_MPC512X)
 #include <asm/immap_512x.h>
-#elif defined(CONFIG_MPC8220)
-#include <asm/immap_8220.h>
 #elif defined(CONFIG_8260)
 #if   defined(CONFIG_MPC8247) \
    || defined(CONFIG_MPC8248) \
@@ -583,7 +581,6 @@ void	trap_init     (ulong);
     defined (CONFIG_74x)	|| \
     defined (CONFIG_75x)	|| \
     defined (CONFIG_74xx)	|| \
-    defined (CONFIG_MPC8220)	|| \
     defined (CONFIG_MPC85xx)	|| \
     defined (CONFIG_MPC86xx)	|| \
     defined (CONFIG_MPC83xx)
@@ -675,9 +672,6 @@ int	prt_8260_clks (void);
 #elif defined(CONFIG_MPC5xxx)
 int	prt_mpc5xxx_clks (void);
 #endif
-#if defined(CONFIG_MPC8220)
-int	prt_mpc8220_clks (void);
-#endif
 #ifdef CONFIG_4xx
 ulong	get_OPB_freq (void);
 ulong	get_PCI_freq (void);
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
deleted file mode 100644
index 39c29ecc222..00000000000
--- a/include/configs/Alaska8220.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * (C) Copyright 2004
- * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8220		1
-#define CONFIG_ALASKA8220	1	/* ... on Alaska board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BAT_RW		1	/* Use common BAT rw code */
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
-   determine the CPU speed. */
-#define CONFIG_SYS_MPC8220_CLKIN	30000000/* ... running at 30MHz */
-#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
-
-/*
- * Serial console configuration
- */
-
-/* Define this for PSC console
-#define CONFIG_PSC_CONSOLE	1
-*/
-
-#define CONFIG_EXTUART_CONSOLE	1
-
-#ifdef CONFIG_EXTUART_CONSOLE
-#   define CONFIG_CONS_INDEX	1
-#   define CONFIG_SYS_NS16550_SERIAL
-#   define CONFIG_SYS_NS16550
-#   define CONFIG_SYS_NS16550_REG_SIZE 1
-#   define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CPLD_BASE + 0x1008)
-#   define CONFIG_SYS_NS16550_CLK	18432000
-#endif
-
-#define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_TIMESTAMP			/* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_MII
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
-#define CONFIG_BOOTARGS		"root=/dev/ram rw"
-#define CONFIG_ETHADDR		00:e0:0c:bc:e0:60
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		00:e0:0c:bc:e0:61
-#define CONFIG_IPADDR		192.162.1.2
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_SERVERIP		192.162.1.1
-#define CONFIG_GATEWAYIP	192.162.1.1
-#define CONFIG_HOSTNAME		Alaska
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_MODULE		1
-
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
-/*
-#define CONFIG_ENV_IS_IN_EEPROM	1
-#define CONFIG_ENV_OFFSET		0
-#define CONFIG_ENV_SIZE		256
-*/
-
-/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
-   else undefined it will boot from Intel Strata flash */
-#define CONFIG_SYS_AMD_BOOT		1
-
-/*
- * Flexbus Chipselect configuration
- */
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_CS0_BASE		0xfff0
-#define CONFIG_SYS_CS0_MASK		0x00080000  /* 512 KB */
-#define CONFIG_SYS_CS0_CTRL		0x003f0d40
-
-#define CONFIG_SYS_CS1_BASE		0xfe00
-#define CONFIG_SYS_CS1_MASK		0x01000000  /* 16 MB */
-#define CONFIG_SYS_CS1_CTRL		0x003f1540
-#else
-#define CONFIG_SYS_CS0_BASE		0xff00
-#define CONFIG_SYS_CS0_MASK		0x01000000  /* 16 MB */
-#define CONFIG_SYS_CS0_CTRL		0x003f1540
-
-#define CONFIG_SYS_CS1_BASE		0xfe08
-#define CONFIG_SYS_CS1_MASK		0x00080000  /* 512 KB */
-#define CONFIG_SYS_CS1_CTRL		0x003f0d40
-#endif
-
-#define CONFIG_SYS_CS2_BASE		0xf100
-#define CONFIG_SYS_CS2_MASK		0x00040000
-#define CONFIG_SYS_CS2_CTRL		0x003f1140
-
-#define CONFIG_SYS_CS3_BASE		0xf200
-#define CONFIG_SYS_CS3_MASK		0x00040000
-#define CONFIG_SYS_CS3_CTRL		0x003f1100
-
-
-#define CONFIG_SYS_FLASH0_BASE		(CONFIG_SYS_CS0_BASE << 16)
-#define CONFIG_SYS_FLASH1_BASE		(CONFIG_SYS_CS1_BASE << 16)
-
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH1_BASE + 0xf00000
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_AMD_BASE
-#else
-#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH0_BASE + 0xf00000
-#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH1_BASE
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_INTEL_BASE
-#endif
-
-#define CONFIG_SYS_CPLD_BASE		(CONFIG_SYS_CS2_BASE << 16)
-#define CONFIG_SYS_FPGA_BASE		(CONFIG_SYS_CS3_BASE << 16)
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
-
-#define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
-#define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
-
-#define CONFIG_SYS_FLASH_CHECKSUM
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV_SIZE		PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#else
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#endif
-
-#define CONFIG_ENV_OVERWRITE	1
-
-#if defined CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xF0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-#define CONFIG_SYS_SRAM_BASE		(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_SRAM_SIZE		0x8000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
-
-/* SDRAM configuration */
-#define CONFIG_SYS_SDRAM_TOTAL_BANKS		2
-#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
-#define CONFIG_SYS_SDRAM_SPD_SIZE		0x40
-#define CONFIG_SYS_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
-
-/* SDRAM drive strength register */
-#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
-					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
-					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
-					 (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
-					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBD_SHIFT))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC8220_FEC	1
-#define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR		0x18
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
-#define CONFIG_SYS_PROMPT		"=> "	    /* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	    /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000  /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000    /* default load address */
-
-#define CONFIG_SYS_HZ			1000	    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5   /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-/*
- * JFFS2 partitions
- */
-
-/* No command line, one static partition */
-/*
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0x00400000
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-*/
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor0=alaska-0"
-#define MTDPARTS_DEFAULT	"mtdparts=alaska-0:4m(user)"
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
deleted file mode 100644
index 5f925b328c3..00000000000
--- a/include/configs/Yukon8220.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * (C) Copyright 2004
- * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8220		1
-#define CONFIG_YUKON8220	1	/* ... on Yukon board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BAT_RW		1	/* Use common BAT rw code */
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
-   determine the CPU speed. */
-#define CONFIG_SYS_MPC8220_CLKIN	30000000/* ... running at 30MHz */
-#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
-
-/*
- * Serial console configuration
- */
-
-/* Define this for PSC console
-#define CONFIG_PSC_CONSOLE	1
-*/
-
-#define CONFIG_EXTUART_CONSOLE	1
-
-#ifdef CONFIG_EXTUART_CONSOLE
-#   define CONFIG_CONS_INDEX	1
-#   define CONFIG_SYS_NS16550_SERIAL
-#   define CONFIG_SYS_NS16550
-#   define CONFIG_SYS_NS16550_REG_SIZE 1
-#   define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CPLD_BASE + 0x1008)
-#   define CONFIG_SYS_NS16550_CLK	18432000
-#endif
-
-#define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_TIMESTAMP			/* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_MII
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
-#define CONFIG_BOOTARGS		"root=/dev/ram rw"
-#define CONFIG_ETHADDR		00:e0:0c:bc:e0:60
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		00:e0:0c:bc:e0:61
-#define CONFIG_IPADDR		192.162.1.2
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_SERVERIP		192.162.1.1
-#define CONFIG_GATEWAYIP	192.162.1.1
-#define CONFIG_HOSTNAME		yukon
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_MODULE		1
-
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x52	/* 1011000xb */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
-/*
-#define CONFIG_ENV_IS_IN_EEPROM	1
-#define CONFIG_ENV_OFFSET		0
-#define CONFIG_ENV_SIZE		256
-*/
-
-/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
-   else undefined it will boot from Intel Strata flash */
-#define CONFIG_SYS_AMD_BOOT		1
-
-/*
- * Flexbus Chipselect configuration
- */
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_CS0_BASE		0xfff0
-#define CONFIG_SYS_CS0_MASK		0x00080000  /* 512 KB */
-#define CONFIG_SYS_CS0_CTRL		0x003f0d40
-
-#define CONFIG_SYS_CS1_BASE		0xfe00
-#define CONFIG_SYS_CS1_MASK		0x01000000  /* 16 MB */
-#define CONFIG_SYS_CS1_CTRL		0x003f1540
-#else
-#define CONFIG_SYS_CS0_BASE		0xff00
-#define CONFIG_SYS_CS0_MASK		0x01000000  /* 16 MB */
-#define CONFIG_SYS_CS0_CTRL		0x003f1540
-
-#define CONFIG_SYS_CS1_BASE		0xfe08
-#define CONFIG_SYS_CS1_MASK		0x00080000  /* 512 KB */
-#define CONFIG_SYS_CS1_CTRL		0x003f0d40
-#endif
-
-#define CONFIG_SYS_CS2_BASE		0xf100
-#define CONFIG_SYS_CS2_MASK		0x00040000
-#define CONFIG_SYS_CS2_CTRL		0x003f1140
-
-#define CONFIG_SYS_CS3_BASE		0xf200
-#define CONFIG_SYS_CS3_MASK		0x00040000
-#define CONFIG_SYS_CS3_CTRL		0x003f1100
-
-
-#define CONFIG_SYS_FLASH0_BASE		(CONFIG_SYS_CS0_BASE << 16)
-#define CONFIG_SYS_FLASH1_BASE		(CONFIG_SYS_CS1_BASE << 16)
-
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH1_BASE + 0xf00000
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_AMD_BASE
-#else
-#define CONFIG_SYS_INTEL_BASE		CONFIG_SYS_FLASH0_BASE + 0xf00000
-#define CONFIG_SYS_AMD_BASE		CONFIG_SYS_FLASH1_BASE
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_INTEL_BASE
-#endif
-
-#define CONFIG_SYS_CPLD_BASE		(CONFIG_SYS_CS2_BASE << 16)
-#define CONFIG_SYS_FPGA_BASE		(CONFIG_SYS_CS3_BASE << 16)
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	4	/* max num of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
-
-#define PHYS_AMD_SECT_SIZE	0x00010000 /*  64 KB sectors (x2) */
-#define PHYS_INTEL_SECT_SIZE	0x00020000 /* 128 KB sectors (x2) */
-
-#define CONFIG_SYS_FLASH_CHECKSUM
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV_SIZE		PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV1_SIZE		PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#else
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV_SIZE		PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE	PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_ADDR		(CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV1_SIZE		PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE	PHYS_AMD_SECT_SIZE
-#endif
-
-#define CONFIG_ENV_OVERWRITE	1
-
-#if defined CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR	0
-#endif
-#ifndef CONFIG_SYS_JFFS2_FIRST_BANK
-#define CONFIG_SYS_JFFS2_FIRST_BANK	0
-#endif
-#ifndef CONFIG_SYS_JFFS2_NUM_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
-#endif
-#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1)
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xF0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-#define CONFIG_SYS_SRAM_BASE		(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_SRAM_SIZE		0x8000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
-
-/* SDRAM configuration */
-#define CONFIG_SYS_SDRAM_TOTAL_BANKS		2
-#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR		0x51		/* 7bit */
-#define CONFIG_SYS_SDRAM_SPD_SIZE		0x40
-#define CONFIG_SYS_SDRAM_CAS_LATENCY		4		/* (CL=2)x2 */
-
-/* SDRAM drive strength register */
-#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_LOW  << SDRAMDS_SBE_SHIFT) | \
-					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
-					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBA_SHIFT) | \
-					 (DRIVE_STRENGTH_OFF  << SDRAMDS_SBS_SHIFT) | \
-					 (DRIVE_STRENGTH_LOW  << SDRAMDS_SBD_SHIFT))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC8220_FEC	1
-#define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR		0x18
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
-#define CONFIG_SYS_PROMPT		"=> "	    /* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	    /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000  /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000    /* default load address */
-
-#define CONFIG_SYS_HZ			1000	    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5   /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
deleted file mode 100644
index f67898e840f..00000000000
--- a/include/configs/sorcery.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * (C) Copyright 2004
- * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8220		1
-#define CONFIG_SORCERY		1	/* Sorcery board */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to
-   determine the CPU speed. */
-#define CONFIG_SYS_MPC8220_CLKIN	60000000 /* ... running at 60MHz */
-#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC */
-
-#define CONFIG_BAUDRATE		115200	    /* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* PCI */
-#define CONFIG_PCI              1
-#define CONFIG_PCI_PNP          1
-
-#define CONFIG_PCI_MEM_BUS      0x80000000
-#define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE     0x10000000
-
-#define CONFIG_PCI_IO_BUS	0x71000000
-#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE	0x01000000
-
-#define CONFIG_PCI_CFG_BUS	0x70000000
-#define CONFIG_PCI_CFG_PHYS	CONFIG_PCI_CFG_BUS
-#define CONFIG_PCI_CFG_SIZE	0x01000000
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Default Environment
- */
-#define CONFIG_BOOTDELAY	5    /* autoboot after 5 seconds */
-#define CONFIG_HOSTNAME		sorcery
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=$serverip:$rootpath\0"				\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs $bootargs "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask"		\
-		":$hostname:$netdev:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm $kernel_addr\0"					\
-	"flash_self=run ramargs addip;"					\
-		"bootm $kernel_addr $ramdisk_addr\0"			\
-	"net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0"	\
-	"rootpath=/opt/eldk/ppc_82xx\0"					\
-	"bootfile=/tftpboot/sorcery/uImage\0"				\
-	"kernel_addr=FFE00000\0"					\
-	"ramdisk_addr=FFB00000\0"					\
-	""
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
-
-#define CONFIG_EEPRO100
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_MODULE		1
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Flexbus Chipselect configuration
- * Beware: Some CS# seem to be mandatory (if these CS# are not set,
- * board can hang-up in unpredictable place).
- * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS#
- */
-
-/* Flash */
-#define CONFIG_SYS_CS0_BASE		0xf800
-#define CONFIG_SYS_CS0_MASK		0x08000000 /* 128 MB (two chips) */
-#define CONFIG_SYS_CS0_CTRL		0x001019c0
-
-/* NVM */
-#define CONFIG_SYS_CS1_BASE		0xf7e8
-#define CONFIG_SYS_CS1_MASK		0x00040000 /* 256K */
-#define CONFIG_SYS_CS1_CTRL		0x00101940 /* 8bit port size */
-
-/* Atlas2 + Gemini */
-#define CONFIG_SYS_CS2_BASE		0xf7e7
-#define CONFIG_SYS_CS2_MASK		0x00010000 /* 64K*/
-#define CONFIG_SYS_CS2_CTRL		0x001011c0 /* 16bit port size */
-
-/* CAN Controller */
-#define CONFIG_SYS_CS3_BASE		0xf7e6
-#define CONFIG_SYS_CS3_MASK		0x00010000 /* 64K */
-#define CONFIG_SYS_CS3_CTRL		0x00102140 /* 8Bit port size */
-
-/* Foreign interface */
-#define CONFIG_SYS_CS4_BASE		0xf7e5
-#define CONFIG_SYS_CS4_MASK		0x00010000 /* 64K */
-#define CONFIG_SYS_CS4_CTRL		0x00101dc0 /* 16bit port size */
-
-/* CPLD */
-#define CONFIG_SYS_CS5_BASE		0xf7e4
-#define CONFIG_SYS_CS5_MASK		0x00010000 /* 64K */
-#define CONFIG_SYS_CS5_CTRL		0x001000c0 /* 16bit port size */
-
-#define CONFIG_SYS_FLASH0_BASE		(CONFIG_SYS_CS0_BASE << 16)
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_FLASH0_BASE)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,  \
-				CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000)
-#define CONFIG_ENV_SIZE		0x4000                       /* 16K */
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + 0x20000)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OVERWRITE	1
-
-#if defined CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xF0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-#define CONFIG_SYS_SRAM_BASE		(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_SRAM_SIZE		0x8000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_INIT_RAM_SIZE	0x8000	/* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10) /* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
-
-/* SDRAM configuration (for SPD) */
-#define CONFIG_SYS_SDRAM_TOTAL_BANKS		1
-#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR		0x50		/* 7bit */
-#define CONFIG_SYS_SDRAM_SPD_SIZE		0x100
-#define CONFIG_SYS_SDRAM_CAS_LATENCY		5		/* (CL=2.5)x2 */
-
-/* SDRAM drive strength register (for SSTL_2 class II)*/
-#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH	((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \
-					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
-					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \
-					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \
-					 (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC8220_FEC	1
-#define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR		0x1F
-#define CONFIG_MII		1
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			    /* undef to save memory	*/
-#define CONFIG_SYS_PROMPT		"=> "	    /* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	    /* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE		256	    /* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	    /* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000  /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000  /* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000    /* default load address */
-
-#define CONFIG_SYS_HZ			1000	    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8220 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-
-/*
-#define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL          HID0_ICE
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/mpc8220.h b/include/mpc8220.h
deleted file mode 100644
index c4900a0f110..00000000000
--- a/include/mpc8220.h
+++ /dev/null
@@ -1,717 +0,0 @@
-/*
- * include/mpc8220.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __MPC8220_H__
-#define __MPC8220_H__
-
-/* Processor name */
-#if defined(CONFIG_MPC8220)
-#define CPU_ID_STR	    "MPC8220"
-#endif
-
-/* Exception offsets (PowerPC standard) */
-#define EXC_OFF_SYS_RESET   0x0100
-#define _START_OFFSET	EXC_OFF_SYS_RESET
-
-/* Internal memory map */
-/* MPC8220 Internal Register MMAP */
-#define MMAP_MBAR	(CONFIG_SYS_MBAR + 0x00000000) /* chip selects		     */
-#define MMAP_MEMCTL	(CONFIG_SYS_MBAR + 0x00000100) /* sdram controller	     */
-#define MMAP_XLBARB	(CONFIG_SYS_MBAR + 0x00000200) /* xlb arbitration control   */
-#define MMAP_CDM	(CONFIG_SYS_MBAR + 0x00000300) /* clock distribution module */
-#define MMAP_VDOPLL	(CONFIG_SYS_MBAR + 0x00000400) /* video PLL		     */
-#define MMAP_FB		(CONFIG_SYS_MBAR + 0x00000500) /* flex bus controller	     */
-#define MMAP_PCFG	(CONFIG_SYS_MBAR + 0x00000600) /* port config		     */
-#define MMAP_ICTL	(CONFIG_SYS_MBAR + 0x00000700) /* interrupt controller	     */
-#define MMAP_GPTMR	(CONFIG_SYS_MBAR + 0x00000800) /* general purpose timers    */
-#define MMAP_SLTMR	(CONFIG_SYS_MBAR + 0x00000900) /* slice timers		     */
-#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x00000A00) /* gpio module		     */
-#define MMAP_XCPCI	(CONFIG_SYS_MBAR + 0x00000B00) /* pci controller	     */
-#define MMAP_PCIARB	(CONFIG_SYS_MBAR + 0x00000C00) /* pci arbiter		     */
-#define MMAP_EXTDMA1	(CONFIG_SYS_MBAR + 0x00000D00) /* external dma1	     */
-#define MMAP_EXTDMA2	(CONFIG_SYS_MBAR + 0x00000E00) /* external dma1	     */
-#define MMAP_USBH	(CONFIG_SYS_MBAR + 0x00001000) /* usb host		     */
-#define MMAP_CMTMR	(CONFIG_SYS_MBAR + 0x00007f00) /* comm timers		     */
-#define MMAP_DMA	(CONFIG_SYS_MBAR + 0x00008000) /* dma			     */
-#define MMAP_USBD	(CONFIG_SYS_MBAR + 0x00008200) /* usb device		     */
-#define MMAP_COMMPCI	(CONFIG_SYS_MBAR + 0x00008400) /* pci comm Bus regs	     */
-#define MMAP_1284	(CONFIG_SYS_MBAR + 0x00008500) /* 1284			     */
-#define MMAP_PEV	(CONFIG_SYS_MBAR + 0x00008600) /* print engine video	     */
-#define MMAP_PSC1	(CONFIG_SYS_MBAR + 0x00008800) /* psc1 block		     */
-#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00008f00) /* i2c controller	     */
-#define MMAP_FEC1	(CONFIG_SYS_MBAR + 0x00009000) /* fast ethernet 1	     */
-#define MMAP_FEC2	(CONFIG_SYS_MBAR + 0x00009800) /* fast ethernet 2	     */
-#define MMAP_JBIGRAM	(CONFIG_SYS_MBAR + 0x0000a000) /* jbig RAM		     */
-#define MMAP_JBIG	(CONFIG_SYS_MBAR + 0x0000c000) /* jbig			     */
-#define MMAP_PDLA	(CONFIG_SYS_MBAR + 0x00010000) /*			     */
-#define MMAP_SRAMCFG	(CONFIG_SYS_MBAR + 0x0001ff00) /* SRAM config		     */
-#define MMAP_SRAM	(CONFIG_SYS_MBAR + 0x00020000) /* SRAM			     */
-
-#define SRAM_SIZE	0x8000			/* 32 KB */
-
-/* ------------------------------------------------------------------------ */
-/*
- * Macro for Programmable Serial Channel
- */
-/* equates for mode reg. 1 for channel	A or B */
-#define PSC_MR1_RX_RTS		0x80000000    /* receiver RTS enabled */
-#define PSC_MR1_RX_INT		0x40000000    /* receiver intrupt enabled */
-#define PSC_MR1_ERR_MODE	0x20000000    /* block error mode */
-#define PSC_MR1_PAR_MODE_MULTI	0x18000000    /* multi_drop mode */
-#define PSC_MR1_NO_PARITY	0x10000000    /* no parity mode */
-#define PSC_MR1_ALWAYS_0	0x08000000    /* force parity mode */
-#define PSC_MR1_ALWAYS_1	0x0c000000    /* force parity mode */
-#define PSC_MR1_EVEN_PARITY	0x00000000    /* parity mode */
-#define PSC_MR1_ODD_PARITY	0x04000000    /* 0 = even, 1 = odd */
-#define PSC_MR1_BITS_CHAR_8	0x03000000    /* 8 bits */
-#define PSC_MR1_BITS_CHAR_7	0x02000000    /* 7 bits */
-#define PSC_MR1_BITS_CHAR_6	0x01000000    /* 6 bits */
-#define PSC_MR1_BITS_CHAR_5	0x00000000    /* 5 bits */
-
-/* equates for mode reg. 2 for channel	A or B */
-#define PSC_MR2_NORMAL_MODE	0x00000000    /* normal channel mode */
-#define PSC_MR2_AUTO_MODE	0x40000000    /* automatic channel mode */
-#define PSC_MR2_LOOPBACK_LOCL	0x80000000    /* local loopback channel mode */
-#define PSC_MR2_LOOPBACK_REMT	0xc0000000    /* remote loopback channel mode */
-#define PSC_MR2_TX_RTS		0x20000000    /* transmitter RTS enabled */
-#define PSC_MR2_TX_CTS		0x10000000    /* transmitter CTS enabled */
-#define PSC_MR2_STOP_BITS_2	0x0f000000    /* 2 stop bits */
-#define PSC_MR2_STOP_BITS_1	0x07000000    /* 1 stop bit */
-
-/* equates for status reg. A or B */
-#define PSC_SR_BREAK		0x80000000    /* received break */
-#define PSC_SR_NEOF		PSC_SR_BREAK  /* Next byte is EOF - MIR/FIR */
-#define PSC_SR_FRAMING		0x40000000    /* framing error */
-#define PSC_SR_PHYERR		PSC_SR_FRAMING/* Physical Layer error - MIR/FIR */
-#define PSC_SR_PARITY		0x20000000    /* parity error */
-#define PSC_SR_CRCERR		PSC_SR_PARITY /* CRC error */
-#define PSC_SR_OVERRUN		0x10000000    /* overrun error */
-#define PSC_SR_TXEMT		0x08000000    /* transmitter empty */
-#define PSC_SR_TXRDY		0x04000000    /* transmitter ready*/
-#define PSC_SR_FFULL		0x02000000    /* fifo full */
-#define PSC_SR_RXRDY		0x01000000    /* receiver ready */
-#define PSC_SR_DEOF		0x00800000    /* Detect EOF or RX-FIFO contain EOF */
-#define PSC_SR_ERR		0x00400000    /* Error Status including FIFO */
-
-/* equates for clock select reg. */
-#define PSC_CSRX16EXT_CLK	0x1110	/* x 16 ext_clock */
-#define PSC_CSRX1EXT_CLK	0x1111	/* x 1 ext_clock  */
-
-/* equates for command reg. A or B */
-#define PSC_CR_NO_COMMAND	0x00000000    /* no command */
-#define PSC_CR_RST_MR_PTR_CMD	0x10000000    /* reset mr pointer command */
-#define PSC_CR_RST_RX_CMD	0x20000000    /* reset receiver command */
-#define PSC_CR_RST_TX_CMD	0x30000000    /* reset transmitter command */
-#define PSC_CR_RST_ERR_STS_CMD	0x40000000    /* reset error status cmnd */
-#define PSC_CR_RST_BRK_INT_CMD	0x50000000    /* reset break int. command */
-#define PSC_CR_STR_BREAK_CMD	0x60000000    /* start break command */
-#define PSC_CR_STP_BREAK_CMD	0x70000000    /* stop break command */
-#define PSC_CR_RX_ENABLE	0x01000000    /* receiver enabled */
-#define PSC_CR_RX_DISABLE	0x02000000    /* receiver disabled */
-#define PSC_CR_TX_ENABLE	0x04000000    /* transmitter enabled */
-#define PSC_CR_TX_DISABLE	0x08000000    /* transmitter disabled */
-
-/* equates for input port change reg. */
-#define PSC_IPCR_SYNC		0x80000000    /* Sync Detect */
-#define PSC_IPCR_D_CTS		0x10000000    /* Delta CTS */
-#define PSC_IPCR_CTS		0x01000000    /* CTS - current state of PSC_CTS */
-
-/* equates for auxiliary control reg. (timer and counter clock selects) */
-#define PSC_ACR_BRG		0x80000000    /* for 68681 compatibility
-						 baud rate gen select
-						 0 = set 1; 1 = set 2
-						 equates are set 2 ONLY */
-#define PSC_ACR_TMR_EXT_CLK_16	0x70000000    /* xtnl clock divided by 16 */
-#define PSC_ACR_TMR_EXT_CLK	0x60000000    /* external clock */
-#define PSC_ACR_TMR_IP2_16	0x50000000    /* ip2 divided by 16 */
-#define PSC_ACR_TMR_IP2		0x40000000    /* ip2 */
-#define PSC_ACR_CTR_EXT_CLK_16	0x30000000    /* xtnl clock divided by 16 */
-#define PSC_ACR_CTR_TXCB	0x20000000    /* channel B xmitr clock */
-#define PSC_ACR_CTR_TXCA	0x10000000    /* channel A xmitr clock */
-#define PSC_ACR_CTR_IP2		0x00000000    /* ip2 */
-#define PSC_ACR_IEC0		0x01000000    /* interrupt enable ctrl for D_CTS */
-
-/* equates for int. status reg. */
-#define PSC_ISR_IPC		0x80000000    /* input port change*/
-#define PSC_ISR_BREAK		0x04000000    /* delta break */
-#define PSC_ISR_RX_RDY		0x02000000    /* receiver rdy /fifo full */
-#define PSC_ISR_TX_RDY		0x01000000    /* transmitter ready */
-#define PSC_ISR_DEOF		0x00800000    /* Detect EOF / RX-FIFO contains EOF */
-#define PSC_ISR_ERR		0x00400000    /* Error Status including FIFO */
-
-/* equates for int. mask reg. */
-#define PSC_IMR_CLEAR		0xff000000    /* Clear the imr */
-#define PSC_IMR_IPC		0x80000000    /* input port change*/
-#define PSC_IMR_BREAK		0x04000000    /* delta break */
-#define PSC_IMR_RX_RDY		0x02000000    /* rcvr ready / fifo full */
-#define PSC_IMR_TX_RDY		0x01000000    /* transmitter ready */
-#define PSC_IMR_DEOF		0x00800000    /* Detect EOF / RX-FIFO contains EOF */
-#define PSC_IMR_ERR		0x00400000    /* Error Status including FIFO */
-
-/* equates for input port reg. */
-#define PSC_IP_LPWRB		0x80000000    /* Low power mode in Ac97 */
-#define PSC_IP_TGL		0x40000000    /* test usage */
-#define PSC_IP_CTS		0x01000000    /* CTS */
-
-/* equates for output port bit set reg. */
-#define PSC_OPSET_RTS		0x01000000    /* Assert PSC_RTS output */
-
-/* equates for output port bit reset reg. */
-#define PSC_OPRESET_RTS		0x01000000    /* Assert PSC_RTS output */
-
-/* equates for rx FIFO number of data reg. */
-#define PSC_RFNUM(x)		((x&0xff)<<24)/* receive count */
-
-/* equates for tx FIFO number of data reg. */
-#define PSC_TFNUM(x)		((x&0xff)<<24)/* receive count */
-
-/* equates for rx FIFO status reg */
-#define PSC_RFSTAT_TAG(x)	((x&3)<<28)   /* tag */
-#define PSC_RFSTAT_FRAME0	0x08	      /* Frame Indicator 0 */
-#define PSC_RFSTAT_FRAME1	0x04	      /* Frame Indicator 1 */
-#define PSC_RFSTAT_FRAME2	0x02	      /* Frame Indicator 2 */
-#define PSC_RFSTAT_FRAME3	0x01	      /* Frame Indicator 3 */
-#define PSC_RFSTAT_FRAME(x)	((x&0x0f)<<24)/* Frame indicator */
-#define PSC_RFSTAT_ERR		0x00400000    /* Fifo err */
-#define PSC_RFSTAT_UF		0x00200000    /* Underflow */
-#define PSC_RFSTAT_OF		0x00100000    /* overflow */
-#define PSC_RFSTAT_FR		0x00080000    /* frame ready */
-#define PSC_RFSTAT_FULL		0x00040000    /* full */
-#define PSC_RFSTAT_ALARM	0x00020000    /* alarm */
-#define PSC_RFSTAT_EMPTY	0x00010000    /* empty */
-
-/* equates for tx FIFO status reg */
-#define PSC_TFSTAT_TAG(x)	((x&3)<<28)   /* tag */
-#define PSC_TFSTAT_FRAME0	0x08	      /* Frame Indicator 0 */
-#define PSC_TFSTAT_FRAME1	0x04	      /* Frame Indicator 1 */
-#define PSC_TFSTAT_FRAME2	0x02	      /* Frame Indicator 2 */
-#define PSC_TFSTAT_FRAME3	0x01	      /* Frame Indicator 3 */
-#define PSC_TFSTAT_FRAME(x)	((x&0x0f)<<24)/* Frame indicator */
-#define PSC_TFSTAT_ERR		0x00400000    /* Fifo err */
-#define PSC_TFSTAT_UF		0x00200000    /* Underflow */
-#define PSC_TFSTAT_OF		0x00100000    /* overflow */
-#define PSC_TFSTAT_FR		0x00080000    /* frame ready */
-#define PSC_TFSTAT_FULL		0x00040000    /* full */
-#define PSC_TFSTAT_ALARM	0x00020000    /* alarm */
-#define PSC_TFSTAT_EMPTY	0x00010000    /* empty */
-
-/* equates for rx FIFO control reg. */
-#define PSC_RFCNTL_WTAG(x)	((x&3)<<29)   /* Write tag */
-#define PSC_RFCNTL_FRAME	0x08000000    /* Frame mode enable */
-#define PSC_RFCNTL_GR(x)	((x&7)<<24)   /* Granularity */
-
-/* equates for tx FIFO control reg. */
-#define PSC_TFCNTL_WTAG(x)	((x&3)<<29)   /* Write tag */
-#define PSC_TFCNTL_FRAME	0x08000000    /* Frame mode enable */
-#define PSC_TFCNTL_GR(x)	((x&7)<<24)   /* Granularity */
-
-/* equates for rx FIFO alarm reg */
-#define PSC_RFALARM(x)		(x&0x1ff)     /* Alarm */
-
-/* equates for tx FIFO alarm reg */
-#define PSC_TFALARM(x)		(x&0x1ff)     /* Alarm */
-
-/* equates for rx FIFO read pointer */
-#define PSC_RFRPTR(x)		(x&0x1ff)     /* read pointer */
-
-/* equates for tx FIFO read pointer */
-#define PSC_TFRPTR(x)		(x&0x1ff)     /* read pointer */
-
-/* equates for rx FIFO write pointer */
-#define PSC_RFWPTR(x)		(x&0x1ff)     /* write pointer */
-
-/* equates for rx FIFO write pointer */
-#define PSC_TFWPTR(x)		(x&0x1ff)     /* write pointer */
-
-/* equates for rx FIFO last read frame pointer reg */
-#define PSC_RFLRFPTR(x)		(x&0x1ff)     /* last read frame pointer */
-
-/* equates for tx FIFO last read frame pointer reg */
-#define PSC_TFLRFPTR(x)		(x&0x1ff)     /* last read frame pointer */
-
-/* equates for rx FIFO last write frame pointer reg */
-#define PSC_RFLWFPTR(x)		(x&0x1ff)     /* last write frame pointer */
-
-/* equates for tx FIFO last write frame pointer reg */
-#define PSC_TFLWFPTR(x)		(x&0x1ff)     /* last write frame pointer */
-
-/* PCI configuration (only for PLL determination)*/
-#define PCI_REG_PCIGSCR		(MMAP_XCPCI + 0x60) /* Global status/control register */
-#define PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK	0x07000000
-#define PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT		24
-
-#define PCI_REG_PCICAR		(MMAP_XCPCI + 0xF8) /* Configuration Address Register */
-
-/* ------------------------------------------------------------------------ */
-/*
- * Macro for General Purpose Timer
- */
-/* Enable and Mode Select */
-#define GPT_OCT(x)	    (x & 0x3)<<4/* Output Compare Type */
-#define GPT_ICT(x)	    (x & 0x3)	/* Input Capture Type */
-#define GPT_CTRL_WDEN	    0x80	/* Watchdog Enable */
-#define GPT_CTRL_CE	    0x10	/* Counter Enable */
-#define GPT_CTRL_STPCNT	    0x04	/* Stop continous */
-#define GPT_CTRL_ODRAIN	    0x02	/* Open Drain */
-#define GPT_CTRL_INTEN	    0x01	/* Interrupt Enable */
-#define GPT_MODE_GPIO(x)    (x & 0x3)<<4/* Gpio Mode Type */
-#define GPT_TMS_ICT	    0x01	/* Input Capture Enable */
-#define GPT_TMS_OCT	    0x02	/* Output Capture Enable */
-#define GPT_TMS_PWM	    0x03	/* PWM Capture Enable */
-#define GPT_TMS_SGPIO	    0x04	/* PWM Capture Enable */
-
-#define GPT_PWM_WIDTH(x)    (x & 0xffff)
-
-/* Status */
-#define GPT_STA_CAPTURE(x)  (x & 0xffff)/* Read of internal counter */
-
-#define GPT_OVFPIN_OVF(x)   (x & 0x70)	/* Internal counter roll over */
-#define GPT_OVFPIN_PIN	    0x01	/* Input pin - Timer 0 and 1 */
-
-#define GPT_INT_TEXP	    0x08	/* Timer Expired in Internal Timer mode */
-#define GPT_INT_PWMP	    0x04	/* PWM end of period occurred */
-#define GPT_INT_COMP	    0x02	/* OC reference event occurred */
-#define GPT_INT_CAPT	    0x01	/* IC reference event occurred */
-
-/* ------------------------------------------------------------------------ */
-/*
- * Port configuration
- */
-#define CONFIG_SYS_FEC1_PORT0_CONFIG	0x00000000
-#define CONFIG_SYS_FEC1_PORT1_CONFIG	0x00000000
-#define CONFIG_SYS_1284_PORT0_CONFIG  0x00000000
-#define CONFIG_SYS_1284_PORT1_CONFIG  0x00000000
-#define CONFIG_SYS_FEC2_PORT2_CONFIG	0x00000000
-#define CONFIG_SYS_PEV_PORT2_CONFIG   0x00000000
-#define CONFIG_SYS_GP0_PORT0_CONFIG   0x00000000
-#define CONFIG_SYS_GP1_PORT2_CONFIG   0xaaaaaac0
-#define CONFIG_SYS_PSC_PORT3_CONFIG   0x00020000
-#define CONFIG_SYS_CS1_PORT3_CONFIG   0x00000000
-#define CONFIG_SYS_CS2_PORT3_CONFIG	0x10000000
-#define CONFIG_SYS_CS3_PORT3_CONFIG	0x40000000
-#define CONFIG_SYS_CS4_PORT3_CONFIG	0x00000400
-#define CONFIG_SYS_CS5_PORT3_CONFIG	0x00000200
-#define CONFIG_SYS_PCI_PORT3_CONFIG   0x01400180
-#define CONFIG_SYS_I2C_PORT3_CONFIG   0x00000000
-#define CONFIG_SYS_GP2_PORT3_CONFIG   0x000200a0
-
-/* ------------------------------------------------------------------------ */
-/*
- * DRAM configuration
- */
-
-/* Field definitions for the control register */
-#define CTL_MODE_ENABLE_SHIFT	    31
-#define CTL_CKE_SHIFT		    30
-#define CTL_DDR_SHIFT		    29
-#define CTL_REFRESH_SHIFT	    28
-#define CTL_ADDRMUX_SHIFT	    24
-#define CTL_PRECHARGE_SHIFT	    23
-#define CTL_DRIVE_RULE_SHIFT	    22
-#define CTL_REFRESH_INTERVAL_SHIFT  16
-#define CTL_DQSOEN_SHIFT	    8
-#define CTL_BUFFERED_SHIFT	    4
-#define CTL_REFRESH_CMD_SHIFT	    2
-#define CTL_PRECHARGE_CMD_SHIFT	    1
-
-#define CTL_MODE_ENABLE		    (1<<CTL_MODE_ENABLE_SHIFT)
-#define CTL_CKE_HIGH		    (1<<CTL_CKE_SHIFT)
-#define CTL_DDR_MODE		    (1<<CTL_DDR_SHIFT)
-#define CTL_REFRESH_ENABLE	    (1<<CTL_REFRESH_SHIFT)
-#define CTL_ADDRMUX(value)	    ((value)<<CTL_ADDRMUX_SHIFT)
-#define CTL_A8PRECHARGE		    (1<<CTL_PRECHARGE_SHIFT)
-#define CTL_REFRESH_INTERVAL(value) ((value)<<CTL_REFRESH_INTERVAL_SHIFT)
-#define CTL_DQSOEN(value)	    ((value)<<CTL_DQSOEN_SHIFT)
-#define CTL_BUFFERED		    (1<<CTL_BUFFERED_SHIFT)
-#define CTL_REFRESH_CMD		    (1<<CTL_REFRESH_CMD_SHIFT)
-#define CTL_PRECHARGE_CMD	    (1<<CTL_PRECHARGE_CMD_SHIFT)
-
-/* Field definitions for config register 1 */
-
-#define CFG1_SRD2RWP_SHIFT	    28
-#define CFG1_SWT2RWP_SHIFT	    24
-#define CFG1_RLATENCY_SHIFT	    20
-#define CFG1_ACT2WR_SHIFT	    16
-#define CFG1_PRE2ACT_SHIFT	    12
-#define CFG1_REF2ACT_SHIFT	    8
-#define CFG1_WLATENCY_SHIFT	    4
-
-#define CFG1_SRD2RWP(value)	    ((value)<<CFG1_SRD2RWP_SHIFT)
-#define CFG1_SWT2RWP(value)	    ((value)<<CFG1_SWT2RWP_SHIFT)
-#define CFG1_RLATENCY(value)	    ((value)<<CFG1_RLATENCY_SHIFT)
-#define CFG1_ACT2WR(value)	    ((value)<<CFG1_ACT2WR_SHIFT)
-#define CFG1_PRE2ACT(value)	    ((value)<<CFG1_PRE2ACT_SHIFT)
-#define CFG1_REF2ACT(value)	    ((value)<<CFG1_REF2ACT_SHIFT)
-#define CFG1_WLATENCY(value)	    ((value)<<CFG1_WLATENCY_SHIFT)
-
-/* Field definitions for config register 2 */
-#define CFG2_BRD2RP_SHIFT	    28
-#define CFG2_BWT2RWP_SHIFT	    24
-#define CFG2_BRD2WT_SHIFT	    20
-#define CFG2_BURSTLEN_SHIFT	    16
-
-#define CFG2_BRD2RP(value)	    ((value)<<CFG2_BRD2RP_SHIFT)
-#define CFG2_BWT2RWP(value)	    ((value)<<CFG2_BWT2RWP_SHIFT)
-#define CFG2_BRD2WT(value)	    ((value)<<CFG2_BRD2WT_SHIFT)
-#define CFG2_BURSTLEN(value)	    ((value)<<CFG2_BURSTLEN_SHIFT)
-
-/* Field definitions for the mode/extended mode register - mode
- * register access
- */
-#define MODE_REG_SHIFT		    30
-#define MODE_OPMODE_SHIFT	    25
-#define MODE_CL_SHIFT		    22
-#define MODE_BT_SHIFT		    21
-#define MODE_BURSTLEN_SHIFT	    18
-#define MODE_CMD_SHIFT		    16
-
-#define MODE_MODE		    0
-#define MODE_OPMODE(value)	    ((value)<<MODE_OPMODE_SHIFT)
-#define MODE_CL(value)		    ((value)<<MODE_CL_SHIFT)
-#define MODE_BT_INTERLEAVED	    (1<<MODE_BT_SHIFT)
-#define MODE_BT_SEQUENTIAL	    (0<<MODE_BT_SHIFT)
-#define MODE_BURSTLEN(value)	    ((value)<<MODE_BURSTLEN_SHIFT)
-#define MODE_CMD		    (1<<MODE_CMD_SHIFT)
-
-#define MODE_BURSTLEN_8		    3
-#define MODE_BURSTLEN_4		    2
-#define MODE_BURSTLEN_2		    1
-
-#define MODE_CL_2		    2
-#define MODE_CL_2p5		    6
-#define MODE_OPMODE_NORMAL	    0
-#define MODE_OPMODE_RESETDLL	    2
-
-
-/* Field definitions for the mode/extended mode register - extended
- * mode register access
- */
-#define MODE_X_DLL_SHIFT	    18 /* DLL enable/disable */
-#define MODE_X_DS_SHIFT		    19 /* Drive strength normal/reduced */
-#define MODE_X_QFC_SHIFT	    20 /* QFC function (whatever that is) */
-#define MODE_X_OPMODE_SHIFT	    21
-
-#define MODE_EXTENDED		    (1<<MODE_REG_SHIFT)
-#define MODE_X_DLL_ENABLE	    0
-#define MODE_X_DLL_DISABLE	    (1<<MODE_X_DLL_SHIFT)
-#define MODE_X_DS_NORMAL	    0
-#define MODE_X_DS_REDUCED	    (1<<MODE_X_DS_SHIFT)
-#define MODE_X_QFC_DISABLED	    0
-#define MODE_X_OPMODE(value)	    ((value)<<MODE_X_OPMODE_SHIFT)
-
-#ifndef __ASSEMBLY__
-/*
- * DMA control/status registers.
- */
-struct mpc8220_dma {
-    u32 taskBar;	/* DMA + 0x00 */
-    u32 currentPointer; /* DMA + 0x04 */
-    u32 endPointer;	/* DMA + 0x08 */
-    u32 variablePointer;/* DMA + 0x0c */
-
-    u8 IntVect1;	/* DMA + 0x10 */
-    u8 IntVect2;	/* DMA + 0x11 */
-    u16 PtdCntrl;	/* DMA + 0x12 */
-
-    u32 IntPend;	/* DMA + 0x14 */
-    u32 IntMask;	/* DMA + 0x18 */
-
-    u16 tcr_0;		/* DMA + 0x1c */
-    u16 tcr_1;		/* DMA + 0x1e */
-    u16 tcr_2;		/* DMA + 0x20 */
-    u16 tcr_3;		/* DMA + 0x22 */
-    u16 tcr_4;		/* DMA + 0x24 */
-    u16 tcr_5;		/* DMA + 0x26 */
-    u16 tcr_6;		/* DMA + 0x28 */
-    u16 tcr_7;		/* DMA + 0x2a */
-    u16 tcr_8;		/* DMA + 0x2c */
-    u16 tcr_9;		/* DMA + 0x2e */
-    u16 tcr_a;		/* DMA + 0x30 */
-    u16 tcr_b;		/* DMA + 0x32 */
-    u16 tcr_c;		/* DMA + 0x34 */
-    u16 tcr_d;		/* DMA + 0x36 */
-    u16 tcr_e;		/* DMA + 0x38 */
-    u16 tcr_f;		/* DMA + 0x3a */
-
-    u8 IPR0;		/* DMA + 0x3c */
-    u8 IPR1;		/* DMA + 0x3d */
-    u8 IPR2;		/* DMA + 0x3e */
-    u8 IPR3;		/* DMA + 0x3f */
-    u8 IPR4;		/* DMA + 0x40 */
-    u8 IPR5;		/* DMA + 0x41 */
-    u8 IPR6;		/* DMA + 0x42 */
-    u8 IPR7;		/* DMA + 0x43 */
-    u8 IPR8;		/* DMA + 0x44 */
-    u8 IPR9;		/* DMA + 0x45 */
-    u8 IPR10;		/* DMA + 0x46 */
-    u8 IPR11;		/* DMA + 0x47 */
-    u8 IPR12;		/* DMA + 0x48 */
-    u8 IPR13;		/* DMA + 0x49 */
-    u8 IPR14;		/* DMA + 0x4a */
-    u8 IPR15;		/* DMA + 0x4b */
-    u8 IPR16;		/* DMA + 0x4c */
-    u8 IPR17;		/* DMA + 0x4d */
-    u8 IPR18;		/* DMA + 0x4e */
-    u8 IPR19;		/* DMA + 0x4f */
-    u8 IPR20;		/* DMA + 0x50 */
-    u8 IPR21;		/* DMA + 0x51 */
-    u8 IPR22;		/* DMA + 0x52 */
-    u8 IPR23;		/* DMA + 0x53 */
-    u8 IPR24;		/* DMA + 0x54 */
-    u8 IPR25;		/* DMA + 0x55 */
-    u8 IPR26;		/* DMA + 0x56 */
-    u8 IPR27;		/* DMA + 0x57 */
-    u8 IPR28;		/* DMA + 0x58 */
-    u8 IPR29;		/* DMA + 0x59 */
-    u8 IPR30;		/* DMA + 0x5a */
-    u8 IPR31;		/* DMA + 0x5b */
-
-    u32 res1;		/* DMA + 0x5c */
-    u32 res2;		/* DMA + 0x60 */
-    u32 res3;		/* DMA + 0x64 */
-    u32 MDEDebug;	/* DMA + 0x68 */
-    u32 ADSDebug;	/* DMA + 0x6c */
-    u32 Value1;		/* DMA + 0x70 */
-    u32 Value2;		/* DMA + 0x74 */
-    u32 Control;	/* DMA + 0x78 */
-    u32 Status;		/* DMA + 0x7c */
-    u32 EU00;		/* DMA + 0x80 */
-    u32 EU01;		/* DMA + 0x84 */
-    u32 EU02;		/* DMA + 0x88 */
-    u32 EU03;		/* DMA + 0x8c */
-    u32 EU04;		/* DMA + 0x90 */
-    u32 EU05;		/* DMA + 0x94 */
-    u32 EU06;		/* DMA + 0x98 */
-    u32 EU07;		/* DMA + 0x9c */
-    u32 EU10;		/* DMA + 0xa0 */
-    u32 EU11;		/* DMA + 0xa4 */
-    u32 EU12;		/* DMA + 0xa8 */
-    u32 EU13;		/* DMA + 0xac */
-    u32 EU14;		/* DMA + 0xb0 */
-    u32 EU15;		/* DMA + 0xb4 */
-    u32 EU16;		/* DMA + 0xb8 */
-    u32 EU17;		/* DMA + 0xbc */
-    u32 EU20;		/* DMA + 0xc0 */
-    u32 EU21;		/* DMA + 0xc4 */
-    u32 EU22;		/* DMA + 0xc8 */
-    u32 EU23;		/* DMA + 0xcc */
-    u32 EU24;		/* DMA + 0xd0 */
-    u32 EU25;		/* DMA + 0xd4 */
-    u32 EU26;		/* DMA + 0xd8 */
-    u32 EU27;		/* DMA + 0xdc */
-    u32 EU30;		/* DMA + 0xe0 */
-    u32 EU31;		/* DMA + 0xe4 */
-    u32 EU32;		/* DMA + 0xe8 */
-    u32 EU33;		/* DMA + 0xec */
-    u32 EU34;		/* DMA + 0xf0 */
-    u32 EU35;		/* DMA + 0xf4 */
-    u32 EU36;		/* DMA + 0xf8 */
-    u32 EU37;		/* DMA + 0xfc */
-};
-
-/*
- * PCI Header Registers
- */
-typedef struct mpc8220_xcpci {
-	u32	dev_ven_id;		/* 0xb00 - device/vendor ID */
-	u32	stat_cmd_reg;		/* 0xb04 - status command register */
-	u32	class_code_rev_id;	/* 0xb08 - class code / revision ID */
-	u32	bist_htyp_lat_cshl;	/* 0xb0c - BIST/HeaderType/Latency/cache line */
-	u32	base0;			/* 0xb10 - base address 0 */
-	u32	base1;			/* 0xb14 - base address 1 */
-	u32	reserved1[4];		/* 0xb18->0xd27 - base address 2 - 5 */
-	u32	cis;			/* 0xb28 - cardBus CIS pointer */
-	u32	sub_sys_ven_id;		/* 0xb2c - sub system ID/ subsystem vendor ID */
-	u32	reserved2;		/* 0xb30 - expansion ROM base address */
-	u32	reserved3;		/* 0xb00 - reserved */
-	u32	reserved4;		/* 0xb00 - reserved */
-	u32	mlat_mgnt_ipl;		/* 0xb3c - MaxLat/MinGnt/ int pin/int line */
-	u32	reserved5[8];
-	/* MPC8220 specific - not accessible in PCI header space externally */
-	u32	glb_stat_ctl;		/* 0xb60 - Global Status Control */
-	u32	target_bar0;		/* 0xb64 - Target Base Address 0 */
-	u32	target_bar1;		/* 0xb68 - Target Base Address 1 */
-	u32	target_ctrl;		/* 0xb6c - Target Control */
-	u32	init_win0;		/* 0xb70 - Initiator Window 0 Base/Translation */
-	u32	init_win1;		/* 0xb74 - Initiator Window 1 Base/Translation */
-	u32	init_win2;		/* 0xb78 - Initiator Window 2 Base/Translation */
-	u32	reserved6;		/* 0xb7c - reserved  */
-	u32	init_win_cfg;		/* 0xb80 */
-	u32	init_ctrl;		/* 0xb84 */
-	u32	init_stat;		/* 0xb88 */
-	u32	reserved7[27];
-	u32	cfg_adr;		/* 0xbf8 */
-	u32	reserved8;
-} mpc8220_xcpci_t;
-
-/* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB,
-   reg1 - 1GB */
-#define PCI_BASE_ADDR_REG0			0x40000000
-#define PCI_BASE_ADDR_REG1			(CONFIG_SYS_SDRAM_BASE)
-#define PCI_TARGET_BASE_ADDR_REG0		(CONFIG_SYS_MBAR)
-#define PCI_TARGET_BASE_ADDR_REG1		(CONFIG_SYS_SDRAM_BASE)
-#define PCI_TARGET_BASE_ADDR_EN			1<<0
-
-
-/* PCI Global Status/Control Register (PCIGSCR) */
-#define PCI_GLB_STAT_CTRL_PE_SHIFT		29
-#define PCI_GLB_STAT_CTRL_SE_SHIFT		28
-#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_SHIFT	24
-#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_MASK	0x7
-#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_SHIFT	16
-#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_MASK	0x7
-#define PCI_GLB_STAT_CTRL_PEE_SHIFT		13
-#define PCI_GLB_STAT_CTRL_SEE_SHIFT		12
-#define PCI_GLB_STAT_CTRL_PR_SHIFT		0
-
-#define PCI_GLB_STAT_CTRL_PE			(1<<PCI_GLB_STAT_CTRL_PE_SHIFT)
-#define PCI_GLB_STAT_CTRL_SE			(1<<PCI_GLB_STAT_CTRL_SE_SHIFT)
-#define PCI_GLB_STAT_CTRL_PEE			(1<<PCI_GLB_STAT_CTRL_PEE_SHIFT)
-#define PCI_GLB_STAT_CTRL_SEE			(1<<PCI_GLB_STAT_CTRL_SEE_SHIFT)
-#define PCI_GLB_STAT_CTRL_PR			(1<<PCI_GLB_STAT_CTRL_PR_SHIFT)
-
-/* PCI Target Control Register (PCITCR) */
-#define PCI_TARGET_CTRL_LD_SHIFT		24
-#define PCI_TARGET_CTRL_P_SHIFT			16
-
-#define PCI_TARGET_CTRL_LD			(1<<PCI_TARGET_CTRL_LD_SHIFT)
-#define PCI_TARGET_CTRL_P			(1<<PCI_TARGET_CTRL_P_SHIFT)
-
-/* PCI Initiator Window Configuration Register (PCIIWCR) */
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT	27
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_SHIFT	25
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_MASK	0x3
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT	24
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT	19
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_SHIFT	17
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_MASK	0x3
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT	16
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT	11
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_SHIFT	9
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_MASK	0x3
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT	8
-
-#define PCI_INIT_WIN_CFG_WIN_MEM_READ		0x0
-#define PCI_INIT_WIN_CFG_WIN_MEM_READ_LINE	0x1
-#define PCI_INIT_WIN_CFG_WIN_MEM_READ_MULTIPLE	0x2
-
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO		(1<<PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN		(1<<PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO		(1<<PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN		(1<<PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO		(1<<PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN		(1<<PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT)
-
-/* PCI Initiator Control Register (PCIICR) */
-#define PCI_INIT_CTRL_REE_SHIFT			26
-#define PCI_INIT_CTRL_IAE_SHIFT			25
-#define PCI_INIT_CTRL_TAE_SHIFT			24
-#define PCI_INIT_CTRL_MAX_RETRIES_SHIFT		0
-#define PCI_INIT_CTRL_MAX_RETRIES_MASK		0xff
-
-#define PCI_INIT_CTRL_REE			(1<<PCI_INIT_CTRL_REE_SHIFT)
-#define PCI_INIT_CTRL_IAE			(1<<PCI_INIT_CTRL_IAE_SHIFT)
-#define PCI_INIT_CTRL_TAE			(1<<PCI_INIT_CTRL_TAE_SHIFT)
-
-/* PCI Status/Command Register (PCISCR) - PCI Dword 1 */
-#define PCI_STAT_CMD_PE_SHIFT			31
-#define PCI_STAT_CMD_SE_SHIFT			30
-#define PCI_STAT_CMD_MA_SHIFT			29
-#define PCI_STAT_CMD_TR_SHIFT			28
-#define PCI_STAT_CMD_TS_SHIFT			27
-#define PCI_STAT_CMD_DT_SHIFT			25
-#define PCI_STAT_CMD_DT_MASK			0x3
-#define PCI_STAT_CMD_DP_SHIFT			24
-#define PCI_STAT_CMD_FC_SHIFT			23
-#define PCI_STAT_CMD_R_SHIFT			22
-#define PCI_STAT_CMD_66M_SHIFT			21
-#define PCI_STAT_CMD_C_SHIFT			20
-#define PCI_STAT_CMD_F_SHIFT			9
-#define PCI_STAT_CMD_S_SHIFT			8
-#define PCI_STAT_CMD_ST_SHIFT			7
-#define PCI_STAT_CMD_PER_SHIFT			6
-#define PCI_STAT_CMD_V_SHIFT			5
-#define PCI_STAT_CMD_MW_SHIFT			4
-#define PCI_STAT_CMD_SP_SHIFT			3
-#define PCI_STAT_CMD_B_SHIFT			2
-#define PCI_STAT_CMD_M_SHIFT			1
-#define PCI_STAT_CMD_IO_SHIFT			0
-
-#define PCI_STAT_CMD_PE			(1<<PCI_STAT_CMD_PE_SHIFT)
-#define PCI_STAT_CMD_SE			(1<<PCI_STAT_CMD_SE_SHIFT)
-#define PCI_STAT_CMD_MA			(1<<PCI_STAT_CMD_MA_SHIFT)
-#define PCI_STAT_CMD_TR			(1<<PCI_STAT_CMD_TR_SHIFT)
-#define PCI_STAT_CMD_TS			(1<<PCI_STAT_CMD_TS_SHIFT)
-#define PCI_STAT_CMD_DP			(1<<PCI_STAT_CMD_DP_SHIFT)
-#define PCI_STAT_CMD_FC			(1<<PCI_STAT_CMD_FC_SHIFT)
-#define PCI_STAT_CMD_R				(1<<PCI_STAT_CMD_R_SHIFT)
-#define PCI_STAT_CMD_66M			(1<<PCI_STAT_CMD_66M_SHIFT)
-#define PCI_STAT_CMD_C				(1<<PCI_STAT_CMD_C_SHIFT)
-#define PCI_STAT_CMD_F				(1<<PCI_STAT_CMD_F_SHIFT)
-#define PCI_STAT_CMD_S				(1<<PCI_STAT_CMD_S_SHIFT)
-#define PCI_STAT_CMD_ST			(1<<PCI_STAT_CMD_ST_SHIFT)
-#define PCI_STAT_CMD_PER			(1<<PCI_STAT_CMD_PER_SHIFT)
-#define PCI_STAT_CMD_V				(1<<PCI_STAT_CMD_V_SHIFT)
-#define PCI_STAT_CMD_MW			(1<<PCI_STAT_CMD_MW_SHIFT)
-#define PCI_STAT_CMD_SP			(1<<PCI_STAT_CMD_SP_SHIFT)
-#define PCI_STAT_CMD_B				(1<<PCI_STAT_CMD_B_SHIFT)
-#define PCI_STAT_CMD_M				(1<<PCI_STAT_CMD_M_SHIFT)
-#define PCI_STAT_CMD_IO			(1<<PCI_STAT_CMD_IO_SHIFT)
-
-/* PCI Configuration 1 Register (PCICR1) - PCI Dword 3 */
-#define PCI_CFG1_HT_SHIFT			16
-#define PCI_CFG1_HT_MASK			0xff
-#define PCI_CFG1_LT_SHIFT			8
-#define PCI_CFG1_LT_MASK			0xff
-#define PCI_CFG1_CLS_SHIFT			0
-#define PCI_CFG1_CLS_MASK			0xf
-
-/* function prototypes */
-void loadtask(int basetask, int tasks);
-u32 dramSetup(void);
-
-#if defined(CONFIG_PSC_CONSOLE)
-int psc_serial_init (void);
-void psc_serial_putc(const char c);
-void psc_serial_puts (const char *s);
-int psc_serial_getc(void);
-int psc_serial_tstc(void);
-void psc_serial_setbrg(void);
-#endif
-
-#if defined (CONFIG_EXTUART_CONSOLE)
-int ext_serial_init (void);
-void ext_serial_putc(const char c);
-void ext_serial_puts (const char *s);
-int ext_serial_getc(void);
-int ext_serial_tstc(void);
-void ext_serial_setbrg(void);
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MPC8220_H__ */
diff --git a/include/netdev.h b/include/netdev.h
index fd3e243c713..3bcb337ee2c 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -77,7 +77,6 @@ int mcdmafec_initialize(bd_t *bis);
 int mcffec_initialize(bd_t *bis);
 int mpc512x_fec_initialize(bd_t *bis);
 int mpc5xxx_fec_initialize(bd_t *bis);
-int mpc8220_fec_initialize(bd_t *bis);
 int mpc82xx_scc_enet_initialize(bd_t *bis);
 int mvgbe_initialize(bd_t *bis);
 int natsemi_initialize(bd_t *bis);
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 2db4784d3b1..c0f8cc85677 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -175,7 +175,7 @@
 #define IM_IMMR		(IM_REGBASE+0x01a8)
 #define IM_SCCR		(IM_REGBASE+0x0c80)
 
-#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220)
+#elif defined(CONFIG_MPC5xxx)
 
 #define HID0_ICE_BITPOS	16
 #define HID0_DCE_BITPOS	17
-- 
cgit v1.2.3


From c416faf84f0586028d430bc962822cbfa17cece9 Mon Sep 17 00:00:00 2001
From: James Yang
Date: Mon, 25 Mar 2013 07:39:58 +0000
Subject: Enable L2 cache parity/ECC error checking

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +-
 arch/powerpc/cpu/mpc85xx/start.S    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 48e6a05d38d..d5b17de7c67 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -337,7 +337,7 @@ int enable_cluster_l2(void)
 			while ((in_be32(&l2cache->l2csr0)
 				& (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
 					;
-			out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+			out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE);
 		}
 		i++;
 	} while (!(cluster & TP_CLUSTER_EOC));
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 5542d0afb24..87168e202dd 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -734,7 +734,7 @@ enable_l2_cluster_l2:
 	isync
 	and.	r1, r0, r4
 	bne	1b
-	lis	r4, L2CSR0_L2E@h
+	lis	r4, (L2CSR0_L2E|L2CSR0_L2PE)@h
 	sync
 	stw	r4, 0(r3)	/* enable L2 */
 delete_ccsr_l2_tlb:
-- 
cgit v1.2.3


From 0c9ab437de1bcfd0524217619937b162273e43d4 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:40:00 +0000
Subject: powerpc/mpc85xx: check if core is disabled for showing status

"cpu <num> status" should check if core is disabled before printing
the spin table location.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/mp.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 43d4836303d..861c8e02872 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -80,6 +80,8 @@ int cpu_status(int nr)
 	if (nr == id) {
 		table = (u32 *)&__spin_table;
 		printf("table base @ 0x%p\n", table);
+	} else if (is_core_disabled(nr)) {
+		puts("Disabled\n");
 	} else {
 		table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
 		printf("Running on cpu %d\n", id);
-- 
cgit v1.2.3


From 9cd95ac74a4283c642bb78ad70b46509575b521c Mon Sep 17 00:00:00 2001
From: James Yang
Date: Mon, 25 Mar 2013 07:40:03 +0000
Subject: Add e6500 L2 replacement policy selection

This is compile-time config.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c  | 2 +-
 arch/powerpc/cpu/mpc85xx/start.S     | 1 +
 arch/powerpc/include/asm/processor.h | 9 +++++++++
 3 files changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index d5b17de7c67..4067f053757 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -337,7 +337,7 @@ int enable_cluster_l2(void)
 			while ((in_be32(&l2cache->l2csr0)
 				& (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
 					;
-			out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE);
+			out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
 		}
 		i++;
 	} while (!(cluster & TP_CLUSTER_EOC));
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 87168e202dd..e413e4ae992 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -735,6 +735,7 @@ enable_l2_cluster_l2:
 	and.	r1, r0, r4
 	bne	1b
 	lis	r4, (L2CSR0_L2E|L2CSR0_L2PE)@h
+	ori	r4, r4, (L2CSR0_L2REP_MODE)@l
 	sync
 	stw	r4, 0(r3)	/* enable L2 */
 delete_ccsr_l2_tlb:
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 5c0c438e603..1760aa14c36 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -507,6 +507,15 @@
 #define   L2CSR0_L2IO		0x00100000	/* L2 Cache Instruction Only */
 #define   L2CSR0_L2DO		0x00010000	/* L2 Cache Data Only */
 #define   L2CSR0_L2REP		0x00003000	/* L2 Line Replacement Algo */
+
+/* e6500 */
+#define   L2CSR0_L2REP_SPLRUAGE	0x00000000	/* L2REP Streaming PLRU with Aging */
+#define   L2CSR0_L2REP_FIFO	0x00001000	/* L2REP FIFO */
+#define   L2CSR0_L2REP_SPLRU	0x00002000	/* L2REP Streaming PLRU */
+#define   L2CSR0_L2REP_PLRU	0x00003000	/* L2REP PLRU */
+
+#define   L2CSR0_L2REP_MODE	L2CSR0_L2REP_SPLRUAGE
+
 #define   L2CSR0_L2FL		0x00000800	/* L2 Cache Flush */
 #define   L2CSR0_L2LFC		0x00000400	/* L2 Cache Lock Flash Clear */
 #define   L2CSR0_L2LOA		0x00000080	/* L2 Cache Lock Overflow Allocate */
-- 
cgit v1.2.3


From 3d2972feac4383f5c0f929996976d00f9c072339 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:40:05 +0000
Subject: powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h

T4160 is a subset of T4240. Merge them in config_mpc85xx.h to simplify
the defines. Also move CONFIG_E6500 out of t4qds.h into config_mpc85xx.h.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/config_mpc85xx.h | 42 ++++++++-----------------------
 include/configs/t4qds.h                   |  1 -
 2 files changed, 10 insertions(+), 33 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 75719414009..569cb8e7c42 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -512,55 +512,33 @@
 #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
 #define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
 
-#elif defined(CONFIG_PPC_T4240)
+#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
+#define CONFIG_E6500
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#ifdef CONFIG_PPC_T4240
 #define CONFIG_MAX_CPUS			12
-#define CONFIG_SYS_FSL_NUM_CC_PLLS	5
-#define CONFIG_SYS_FSL_NUM_LAWS		32
-#define CONFIG_SYS_FSL_SRDS_3
-#define CONFIG_SYS_FSL_SRDS_4
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_SYS_NUM_FMAN		2
 #define CONFIG_SYS_NUM_FM1_DTSEC	8
 #define CONFIG_SYS_NUM_FM1_10GEC	2
 #define CONFIG_SYS_NUM_FM2_DTSEC	8
 #define CONFIG_SYS_NUM_FM2_10GEC	2
 #define CONFIG_NUM_DDR_CONTROLLERS	3
-#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
-#define CONFIG_SYS_FMAN_V3
-#define CONFIG_SYS_FM_MURAM_SIZE	0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v3.0"
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_ERRATUM_A004468
-#define CONFIG_SYS_FSL_ERRATUM_A_004934
-#define CONFIG_SYS_FSL_ERRATUM_A005871
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
-
-#elif defined(CONFIG_PPC_T4160)
-#define CONFIG_SYS_PPC64		/* 64-bit core */
-#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
-#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
-#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#else
 #define CONFIG_MAX_CPUS			8
+#define CONFIG_SYS_NUM_FM1_DTSEC	7
+#define CONFIG_SYS_NUM_FM1_10GEC	1
+#define CONFIG_SYS_NUM_FM2_DTSEC	7
+#define CONFIG_SYS_NUM_FM2_10GEC	1
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#endif
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	5
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SRDS_3
 #define CONFIG_SYS_FSL_SRDS_4
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
 #define CONFIG_SYS_NUM_FMAN		2
-#define CONFIG_SYS_NUM_FM1_DTSEC	7
-#define CONFIG_SYS_NUM_FM1_10GEC	1
-#define CONFIG_SYS_NUM_FM2_DTSEC	7
-#define CONFIG_SYS_NUM_FM2_10GEC	1
-#define CONFIG_NUM_DDR_CONTROLLERS	2
 #define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 943bf6701fc..fa1dcc3528c 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -37,7 +37,6 @@
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
-#define CONFIG_E6500
 #define CONFIG_E500			/* BOOKE e500 family */
 #define CONFIG_E500MC			/* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
-- 
cgit v1.2.3


From 5f208d118a8590843aaca723d304b35f2729c141 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:40:06 +0000
Subject: powerpc/mpc8xxx: Add T1040 and variant SoCs

T1040 and variants have e5500 cores and are compliant to QorIQ Chassis
Generation 2. The major difference between T1040 and its variants is the
number of cores and the number of L2 switch ports.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/Makefile         |   3 +
 arch/powerpc/cpu/mpc85xx/t1040_ids.c      | 135 ++++++++++++++++++++++++++++++
 arch/powerpc/cpu/mpc85xx/t1040_serdes.c   |  93 ++++++++++++++++++++
 arch/powerpc/cpu/mpc8xxx/cpu.c            |   6 ++
 arch/powerpc/include/asm/config_mpc85xx.h |  26 ++++++
 arch/powerpc/include/asm/fsl_serdes.h     |   8 ++
 arch/powerpc/include/asm/immap_85xx.h     |   5 ++
 arch/powerpc/include/asm/processor.h      |   6 ++
 8 files changed, 282 insertions(+)
 create mode 100644 arch/powerpc/cpu/mpc85xx/t1040_ids.c
 create mode 100644 arch/powerpc/cpu/mpc85xx/t1040_serdes.c

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 6e5aec26e03..2318064a478 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -88,6 +88,7 @@ COBJS-$(CONFIG_PPC_B4420)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9132)		+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_T1040)	+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -106,6 +107,7 @@ COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
 COBJS-$(CONFIG_PPC_T4160) += t4240_ids.o
 COBJS-$(CONFIG_PPC_B4420) += b4860_ids.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
+COBJS-$(CONFIG_PPC_T1040) += t1040_ids.o
 
 COBJS-$(CONFIG_QE)	+= qe_io.o
 COBJS-$(CONFIG_CPM2)	+= serial_scc.o
@@ -143,6 +145,7 @@ COBJS-$(CONFIG_PPC_T4160) += t4240_serdes.o
 COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
 COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
+COBJS-$(CONFIG_PPC_T1040) += t1040_serdes.o
 
 COBJS-y	+= cpu.o
 COBJS-y	+= cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
new file mode 100644
index 00000000000..ed615996f11
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	/* dqrr liodn, frame data liodn, liodn off, sdest */
+	SET_QP_INFO(1, 27, 1, 0),
+	SET_QP_INFO(2, 28, 1, 0),
+	SET_QP_INFO(3, 29, 1, 1),
+	SET_QP_INFO(4, 30, 1, 1),
+	SET_QP_INFO(5, 31, 1, 2),
+	SET_QP_INFO(6, 32, 1, 2),
+	SET_QP_INFO(7, 33, 1, 3),
+	SET_QP_INFO(8, 34, 1, 3),
+	SET_QP_INFO(9, 35, 1, 0),
+	SET_QP_INFO(10, 36, 1, 0),
+	SET_QP_INFO(11, 37, 1, 1),
+	SET_QP_INFO(12, 38, 1, 1),
+	SET_QP_INFO(13, 39, 1, 2),
+	SET_QP_INFO(14, 40, 1, 2),
+	SET_QP_INFO(15, 41, 1, 3),
+	SET_QP_INFO(16, 42, 1, 3),
+	SET_QP_INFO(17, 43, 1, 0),
+	SET_QP_INFO(18, 44, 1, 0),
+	SET_QP_INFO(19, 45, 1, 1),
+	SET_QP_INFO(20, 46, 1, 1),
+	SET_QP_INFO(21, 47, 1, 2),
+	SET_QP_INFO(22, 48, 1, 2),
+	SET_QP_INFO(23, 49, 1, 3),
+	SET_QP_INFO(24, 50, 1, 3),
+	SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_1(1, 307),
+	SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_LIODN(62),
+	SET_BMAN_LIODN(63),
+#endif
+
+	SET_SDHC_LIODN(1, 552),
+
+	SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 148),
+
+	SET_DMA_LIODN(1, 147),
+	SET_DMA_LIODN(2, 227),
+
+	SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+	SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+	SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+	SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+	/* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(1, 0, 88),
+	SET_FMAN_RX_1G_LIODN(1, 1, 89),
+	SET_FMAN_RX_1G_LIODN(1, 2, 90),
+	SET_FMAN_RX_1G_LIODN(1, 3, 91),
+	SET_FMAN_RX_1G_LIODN(1, 4, 92),
+	SET_FMAN_RX_1G_LIODN(1, 5, 93),
+	SET_FMAN_RX_10G_LIODN(1, 0, 94),
+	SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+	SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+	SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+	SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+	SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+	SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 678),
+	SET_RMAN_LIODN(1, 679),
+	SET_RMAN_LIODN(2, 680),
+	SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
new file mode 100644
index 00000000000..8261e034767
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = {
+	{	/* SerDes 1 */
+	[0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+		PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1},
+	[0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+		PCIE2, PCIE3, PCIE4, SATA1},
+	[0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+		PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+	[0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+		PCIE2, PCIE2, PCIE2, PCIE2},
+	[0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
+		PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5},
+	[0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
+		PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1},
+	[0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE2, PCIE3, PCIE4, SATA1},
+	[0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+	[0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		 PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+	[0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		 PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+	[0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE2, PCIE2, PCIE2, PCIE2},
+	[0x06] = {PCIE1, PCIE1, PCIE1, PCIE1,
+		PCIE2, PCIE3, PCIE4, SATA1},
+	[0x08] = {PCIE1, PCIE1, PCIE1, PCIE1,
+		PCIE2, PCIE3, SATA2, SATA1},
+	[0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+	[0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+	[0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+	[0x00] = {PCIE1, PCIE1, PCIE1, PCIE1,
+		PCIE2, PCIE2, PCIE2, PCIE2},
+	},
+	{
+	},
+	{
+	},
+	{
+	},
+};
+
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	return serdes_cfg_tbl[serdes][cfg][lane];
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+
+	if (prtcl > (ARRAY_SIZE(serdes_cfg_tbl[serdes])))
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_cfg_tbl[serdes][prtcl][i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 0087cd029fe..23e008e2872 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -85,6 +85,12 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(G4440, G4440, 0),
 	CPU_TYPE_ENTRY(B4420, B4420, 0),
 	CPU_TYPE_ENTRY(B4220, B4220, 0),
+	CPU_TYPE_ENTRY(T1040, T1040, 0),
+	CPU_TYPE_ENTRY(T1041, T1041, 0),
+	CPU_TYPE_ENTRY(T1042, T1042, 0),
+	CPU_TYPE_ENTRY(T1020, T1020, 0),
+	CPU_TYPE_ENTRY(T1021, T1021, 0),
+	CPU_TYPE_ENTRY(T1022, T1022, 0),
 	CPU_TYPE_ENTRY(BSC9130, 9130, 1),
 	CPU_TYPE_ENTRY(BSC9131, 9131, 1),
 	CPU_TYPE_ENTRY(BSC9132, 9132, 2),
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 569cb8e7c42..08e1238fe95 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -603,6 +603,32 @@
 #define CONFIG_SYS_FSL_ERRATUM_A005871
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 
+#elif defined(CONFIG_PPC_T1040)
+#define CONFIG_E5500
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	5
+#define CONFIG_SYS_FSL_NUM_LAWS		16
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	5
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT	4
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV	32
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+
 #else
 #error Processor type not defined for this platform
 #endif
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 6cd7379c8f5..ccb91fb0624 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -80,6 +80,14 @@ enum srds_prtcl {
 	XFI_FM2_MAC9,
 	XFI_FM2_MAC10,
 	INTERLAKEN,
+	SGMII_SW1_DTSEC1,	/* SW indicates on L2 switch */
+	SGMII_SW1_DTSEC2,
+	SGMII_SW1_DTSEC3,
+	SGMII_SW1_DTSEC4,
+	SGMII_SW1_DTSEC5,
+	SGMII_SW1_DTSEC6,
+	QSGMII_SW1_A,		/* SW indicates on L2 swtich */
+	QSGMII_SW1_B,
 };
 
 enum srds {
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 28fe1d22cb8..46f2e1c5164 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1844,6 +1844,11 @@ typedef struct ccsr_gur {
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	25
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL	0x00ff0000
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	16
+#elif defined(CONFIG_PPC_T1040)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL	0xff000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	24
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL	0x00fe0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	17
 #endif
 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1	0x00800000
 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2	0x00400000
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 1760aa14c36..57993867d55 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1126,6 +1126,12 @@
 #define SVR_G4440	0x868101
 #define SVR_B4420	0x868102
 #define SVR_B4220	0x868103
+#define SVR_T1040	0x852000
+#define SVR_T1041	0x852001
+#define SVR_T1042	0x852002
+#define SVR_T1020	0x852100
+#define SVR_T1021	0x852101
+#define SVR_T1022	0x852102
 
 #define SVR_8610	0x80A000
 #define SVR_8641	0x809000
-- 
cgit v1.2.3


From f69814397e7efaf0b2bfa3c83425c906ce6b50f4 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:40:07 +0000
Subject: powerpc/chassis2: Change core numbering scheme

To align with chassis generation 2 spec, all cores are numbered in sequence.
The cores may reside across multiple clusters. Each cluster has zero to four
cores. The first available core is numbered as core 0. The second available
core is numbered as core 1 and so on.

Core clocks are generated by each clusters. To identify the cluster of each
core, topology registers are examined.

Cluster clock registers are reorganized to be easily indexed.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/release.S        | 41 +++++++++++-------------
 arch/powerpc/cpu/mpc85xx/speed.c          | 20 ++++++------
 arch/powerpc/cpu/mpc8xxx/cpu.c            | 53 +++++++++++++++++++++++++------
 arch/powerpc/include/asm/config_mpc85xx.h | 10 ++++++
 arch/powerpc/include/asm/immap_85xx.h     | 24 +++++---------
 arch/powerpc/include/asm/processor.h      |  2 ++
 6 files changed, 92 insertions(+), 58 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 467ea1045df..a4a21b037c6 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -154,16 +154,12 @@ __secondary_start_page:
 	ori	r3,r3,toreset(__spin_table_addr)@l
 	lwz	r3,0(r3)
 
-	/*
-	 * r10 has the base address for the entry.
-	 * we cannot access it yet before setting up a new TLB
-	 */
 	mfspr	r0,SPRN_PIR
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 /*
  * PIR definition for Chassis 2
  * 0-17 Reserved (logic 0s)
- * 8-19 CHIP_ID,    2'b00      - SoC 1
+ * 18-19 CHIP_ID,    2'b00      - SoC 1
  *                  all others - reserved
  * 20-24 CLUSTER_ID 5'b00000   - CCM 1
  *                  all others - reserved
@@ -177,32 +173,33 @@ __secondary_start_page:
  *                       2'b11 - core 3
  * 29-31 THREAD_ID       3'b000 - thread 0
  *                       3'b001 - thread 1
+ *
+ * Power-on PIR increments threads by 0x01, cores within a cluster by 0x08
+ * and clusters by 0x20.
+ *
+ * We renumber PIR so that all threads in the system are consecutive.
  */
-	rlwinm  r4,r0,29,25,31
+
+	rlwinm	r8,r0,29,0x03	/* r8 = core within cluster */
+	srwi	r10,r0,5	/* r10 = cluster */
+
+	mulli	r5,r10,CONFIG_SYS_FSL_CORES_PER_CLUSTER
+	add	r5,r5,r8	/* for spin table index */
+	mulli	r4,r5,CONFIG_SYS_FSL_THREADS_PER_CORE	/* for PIR */
 #elif	defined(CONFIG_E500MC)
 	rlwinm	r4,r0,27,27,31
+	mr	r5,r4
 #else
 	mr	r4,r0
+	mr	r5,r4
 #endif
-	slwi	r8,r4,6	/* spin table is padded to 64 byte */
-	add	r10,r3,r8
 
-#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
-	mfspr	r0,SPRN_PIR
 	/*
-	 * core 0 thread 0: pir reset value 0x00, new pir 0
-	 * core 0 thread 1: pir reset value 0x01, new pir 1
-	 * core 1 thread 0: pir reset value 0x08, new pir 2
-	 * core 1 thread 1: pir reset value 0x09, new pir 3
-	 * core 2 thread 0: pir reset value 0x10, new pir 4
-	 * core 2 thread 1: pir reset value 0x11, new pir 5
-	 * etc.
-	 *
-	 * Only thread 0 of each core will be running, updating PIR doesn't
-	 * need to deal with the thread bits.
+	 * r10 has the base address for the entry.
+	 * we cannot access it yet before setting up a new TLB
 	 */
-	rlwinm	r4,r0,30,24,30
-#endif
+	slwi	r8,r5,6	/* spin table is padded to 64 byte */
+	add	r10,r3,r8
 
 	mtspr	SPRN_PIR,r4	/* write to PIR register */
 
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index f00b1abe63f..a4d6e9cc738 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -112,23 +112,20 @@ void get_sys_info (sys_info_t * sysInfo)
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 	/*
 	 * Each cluster has up to 4 cores, sharing the same PLL selection.
-	 * The cluster assignment is fixed per SoC. There is no way identify the
-	 * assignment so far, presuming the "first configuration" which is to
-	 * fill the lower cluster group first before moving up to next group.
-	 * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
-	 * and core 4~7 on cluster 2
-	 * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
-	 * and core 12~15 on cluster 4 if existing
+	 * The cluster assignment is fixed per SoC. PLL1, PLL2, PLL3 are
+	 * cluster group A, feeding cores on cluster 1 and cluster 2.
+	 * PLL4, PLL5, PLL6 are cluster group B, feeding cores on cluster 3
+	 * and cluster 4 if existing.
 	 */
 	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
-		u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+		int cluster = fsl_qoriq_core_to_cluster(cpu);
+		u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27)
 				& 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
 		if (cplx_pll > 3)
 			printf("Unsupported architecture configuration"
 				" in function %s\n", __func__);
-		cplx_pll += (cpu / 8) * 3;
-
+		cplx_pll += (cluster / 2) * 3;
 		sysInfo->freqProcessor[cpu] =
 			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
 	}
@@ -240,7 +237,8 @@ void get_sys_info (sys_info_t * sysInfo)
 #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
-		u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+		u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+				& 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
 
 		sysInfo->freqProcessor[cpu] =
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 23e008e2872..bc2685544e8 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -103,35 +103,70 @@ static struct cpu_type cpu_type_list[] = {
 };
 
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+static inline u32 init_type(u32 cluster, int init_id)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
+	u32 type = in_be32(&gur->tp_ityp[idx]);
+
+	if (type & TP_ITYP_AV)
+		return type;
+
+	return 0;
+}
+
 u32 compute_ppc_cpumask(void)
 {
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	int i = 0, count = 0;
-	u32 cluster, mask = 0;
+	u32 cluster, type, mask = 0;
 
 	do {
 		int j;
-		cluster = in_be32(&gur->tp_cluster[i++].lower);
-		for (j = 0; j < 4; j++) {
-			u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
-			u32 type = in_be32(&gur->tp_ityp[idx]);
-
-			if (type & TP_ITYP_AV) {
+		cluster = in_be32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			type = init_type(cluster, j);
+			if (type) {
 				if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
 					mask |= 1 << count;
+				count++;
 			}
-			count++;
 		}
+		i++;
 	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
 
 	return mask;
 }
+
+int fsl_qoriq_core_to_cluster(unsigned int core)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int i = 0, count = 0;
+	u32 cluster;
+
+	do {
+		int j;
+		cluster = in_be32(&gur->tp_cluster[i].lower);
+		for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+			if (init_type(cluster, j)) {
+				if (count == core)
+					return i;
+				count++;
+			}
+		}
+		i++;
+	} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+	return -1;	/* cannot identify the cluster */
+}
+
 #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 /*
  * Before chassis genenration 2, the cpumask should be hard-coded.
  * In case of cpu type unknown or cpumask unset, use 1 as fail save.
  */
 #define compute_ppc_cpumask()	1
+#define fsl_qoriq_core_to_cluster(x) x
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 08e1238fe95..dd683351d46 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -517,6 +517,7 @@
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #ifdef CONFIG_PPC_T4240
 #define CONFIG_MAX_CPUS			12
@@ -559,6 +560,7 @@
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #define CONFIG_MAX_CPUS			2
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	4
@@ -581,6 +583,7 @@
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	4
@@ -607,6 +610,7 @@
 #define CONFIG_E5500
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	5
@@ -637,4 +641,10 @@
 #error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
 #endif
 
+#ifdef CONFIG_E6500
+#define CONFIG_SYS_FSL_THREADS_PER_CORE 2
+#else
+#define CONFIG_SYS_FSL_THREADS_PER_CORE 1
+#endif
+
 #endif /* _ASM_MPC85xx_CONFIG_H_ */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 46f2e1c5164..4052037f56f 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1996,6 +1996,7 @@ typedef struct ccsr_gur {
 
 #define TP_CLUSTER_EOC		0x80000000	/* end of clusters */
 #define TP_CLUSTER_INIT_MASK	0x0000003f	/* initiator mask */
+#define TP_INIT_PER_CLUSTER	4
 
 #define FSL_CORENET_DCSR_SZ_MASK	0x00000003
 #define FSL_CORENET_DCSR_SZ_4M		0x0
@@ -2008,22 +2009,13 @@ typedef struct ccsr_gur {
 #define rmuliodnr rio1maintliodnr
 
 typedef struct ccsr_clk {
-	u32	clkc0csr;	/* 0x000 Core 0 Clock control/status */
-	u8	res1[0x1c];
-	u32	clkc1csr;	/* 0x020 Core 1 Clock control/status */
-	u8	res2[0x1c];
-	u32	clkc2csr;	/* 0x040 Core 2 Clock control/status */
-	u8	res3[0x1c];
-	u32	clkc3csr;	/* 0x060 Core 3 Clock control/status */
-	u8	res4[0x1c];
-	u32	clkc4csr;	/* 0x080 Core 4 Clock control/status */
-	u8	res5[0x1c];
-	u32	clkc5csr;	/* 0x0a0 Core 5 Clock control/status */
-	u8	res6[0x1c];
-	u32	clkc6csr;	/* 0x0c0 Core 6 Clock control/status */
-	u8	res7[0x1c];
-	u32	clkc7csr;	/* 0x0e0 Core 7 Clock control/status */
-	u8	res8[0x71c];
+	struct {
+		u32 clkcncsr;	/* core cluster n clock control status */
+		u8  res_004[0x0c];
+		u32 clkcgnhwacsr;/* clock generator n hardware accelerator */
+		u8  res_014[0x0c];
+	} clkcsr[8];
+	u8	res_100[0x700]; /* 0x100 */
 	u32	pllc1gsr;	/* 0x800 Cluster PLL 1 General Status */
 	u8	res10[0x1c];
 	u32	pllc2gsr;	/* 0x820 Cluster PLL 2 General Status */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 57993867d55..56b22d840ad 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1200,6 +1200,8 @@ struct cpu_type {
 struct cpu_type *identify_cpu(u32 ver);
 int fixup_cpu(void);
 
+int fsl_qoriq_core_to_cluster(unsigned int core);
+
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 #define CPU_TYPE_ENTRY(n, v, nc) \
 	{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \
-- 
cgit v1.2.3


From 1b294b7a932aa89c5991e8b200616934849dc3c6 Mon Sep 17 00:00:00 2001
From: York Sun
Date: Mon, 25 Mar 2013 07:40:08 +0000
Subject: powerpc/mpc8xxx: Allow DDR overclock

Allow DDR clock runs faster than SPD specifes. This may cause memory
failure, but the user should know what is going to happen when using
higher than expected DDR clock.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 9adde310109..e958e138dda 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -44,7 +44,6 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
 		printf("DDR clock (MCLK cycle %u ps) is faster than "
 			"the slowest DIMM(s) (tCKmin %u ps) can support.\n",
 			mclk_ps, tCKmin_X_ps);
-		return 1;
 	}
 	/* determine the acutal cas latency */
 	caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps;
@@ -60,7 +59,6 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
 	if (caslat_actual * mclk_ps > 20000) {
 		printf("The choosen cas latency %d is too large\n",
 			caslat_actual);
-		return 1;
 	}
 	outpdimm->lowest_common_SPD_caslat = caslat_actual;
 
-- 
cgit v1.2.3


From 8fa0102bcfd67203e44b656fb478bc358e102ee2 Mon Sep 17 00:00:00 2001
From: Poonam Aggrwal
Date: Mon, 25 Mar 2013 07:40:20 +0000
Subject: powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.h

B4420 is a subset of B4860. Merge them in config_mpc85xx.h to simplify
the defines.
- Removed #define CONFIG_SYS_FSL_NUM_CLUSTERS as this is used nowhere.
- defined CONFIG_SYS_NUM_FM1_10GEC to 0 for B4420 as it does not have 10G.

Also move CONFIG_E6500 out of B4860QDSds.h into config_mpc85xx.h.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/config_mpc85xx.h | 34 ++++++++++---------------------
 include/configs/B4860QDS.h                |  1 -
 2 files changed, 11 insertions(+), 24 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index dd683351d46..1009a31b339 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -556,19 +556,15 @@
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 #define CONFIG_SYS_FSL_PCI_VER_3_X
 
-#elif defined(CONFIG_PPC_B4420)
+#elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420)
+#define CONFIG_E6500
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
-#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
-#define CONFIG_MAX_CPUS			2
-#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
 #define CONFIG_SYS_NUM_FMAN		1
-#define CONFIG_SYS_NUM_FM1_DTSEC	4
-#define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
@@ -579,32 +575,24 @@
 #define CONFIG_SYS_FSL_ERRATUM_A005871
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 
-#elif defined(CONFIG_PPC_B4860)
-#define CONFIG_SYS_PPC64		/* 64-bit core */
-#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
-#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#ifdef CONFIG_PPC_B4860
 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
-#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	4
-#define CONFIG_SYS_FSL_NUM_LAWS		32
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	6
 #define CONFIG_SYS_NUM_FM1_10GEC	2
 #define CONFIG_NUM_DDR_CONTROLLERS	2
-#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
-#define CONFIG_SYS_FMAN_V3
-#define CONFIG_SYS_FM_MURAM_SIZE	0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV	16
-#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_ERRATUM_A_004934
-#define CONFIG_SYS_FSL_ERRATUM_A005871
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+#else
+#define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
+#define CONFIG_SYS_NUM_FM1_DTSEC	4
+#define CONFIG_SYS_NUM_FM1_10GEC	0
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#endif
 
 #elif defined(CONFIG_PPC_T1040)
 #define CONFIG_E5500
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index cfab1e8140c..65f8a2209ea 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -36,7 +36,6 @@
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
-#define CONFIG_E6500
 #define CONFIG_E500			/* BOOKE e500 family */
 #define CONFIG_E500MC			/* BOOKE e500mc family */
 #define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
-- 
cgit v1.2.3


From 6eaeba23ddc5ccde5c97ef919ffcbf44ecad73dd Mon Sep 17 00:00:00 2001
From: Shaveta Leekha
Date: Mon, 25 Mar 2013 07:40:24 +0000
Subject: powerpc/b4860qds: Add LAW Target ID and Create LAW entry for Maple

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/fsl_law.h | 2 ++
 board/freescale/b4860qds/law.c     | 3 +++
 include/configs/B4860QDS.h         | 9 +++++++++
 3 files changed, 14 insertions(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index f9cec8ea441..90b264d35e7 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -70,6 +70,8 @@ enum law_trgt_if {
 	LAW_TRGT_IF_DCSR = 0x1d,
 	LAW_TRGT_IF_LBC = 0x1f,
 	LAW_TRGT_IF_QMAN = 0x3c,
+
+	LAW_TRGT_IF_MAPLE = 0x50,
 };
 #define LAW_TRGT_IF_DDR		LAW_TRGT_IF_DDR_1
 #define LAW_TRGT_IF_IFC		LAW_TRGT_IF_LBC
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
index abaad7ae07d..b26725b2fcb 100644
--- a/board/freescale/b4860qds/law.c
+++ b/board/freescale/b4860qds/law.c
@@ -33,6 +33,9 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
 #endif
 	SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_MAPLE_MEM_PHYS
+	SET_LAW(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_MAPLE),
+#endif
 #ifdef CONFIG_SYS_DCSRBAR_PHYS
 	/* Limit DCSR to 32M to access NPC Trace Buffer */
 	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 65f8a2209ea..1c9d08e2564 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -526,6 +526,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
+/*
+ * MAPLE
+ */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_MAPLE_MEM_PHYS      0xFA0000000ull
+#else
+#define CONFIG_SYS_MAPLE_MEM_PHYS      0xA0000000
+#endif
+
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
-- 
cgit v1.2.3


From 39bdaff4f4dd75b578c9e1fe372e8d56e7d51526 Mon Sep 17 00:00:00 2001
From: Ruchika Gupta
Date: Mon, 25 Mar 2013 07:40:25 +0000
Subject: SECURE BOOT - Removed deletion of TLB entries code

Boot ROM code creates TLB entries for 3.5G space before entering
the u-boot. Earlier we were deleting these entries after early
initialization of CPU. In recent past, code has been added
to invalidate all these entries before relocation of u-boot code.
So this code to delete TLB entries after CPU initialization
is no longer required.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Acked-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c  |  7 -------
 arch/powerpc/include/asm/fsl_secure_boot.h | 10 ----------
 2 files changed, 17 deletions(-)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index dacfdd15ea8..234fde48465 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -180,12 +180,5 @@ void cpu_init_early_f(void)
 
 	invalidate_tlb(1);
 
-#if defined(CONFIG_SECURE_BOOT)
-	/* Disable the TLBs created by ISBC */
-	for (i = CONFIG_SYS_ISBC_START_TLB;
-	     i < CONFIG_SYS_ISBC_START_TLB + CONFIG_SYS_ISBC_NUM_TLBS; i++)
-			disable_tlb(i);
-#endif
-
 	init_tlbs();
 }
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index d1c1967d1d6..2bc6ed1cf00 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -23,16 +23,6 @@
 #ifndef __FSL_SECURE_BOOT_H
 #define __FSL_SECURE_BOOT_H
 
-/* Starting TLB number for the TLB entried for 3.5 G space created by ISBC */
-#if defined(CONFIG_FSL_CORENET)
-#define CONFIG_SYS_ISBC_START_TLB		3
-#else
-#define CONFIG_SYS_ISBC_START_TLB		0
-#endif
-
-/* Number fo TLB's created by ISBC */
-#define CONFIG_SYS_ISBC_NUM_TLBS		5
-
 #if defined(CONFIG_FSL_CORENET)
 #define CONFIG_SYS_PBI_FLASH_BASE		0xc0000000
 #else
-- 
cgit v1.2.3


From a71d45d706a5b51c348160163b6c159632273fed Mon Sep 17 00:00:00 2001
From: York Sun
Date: Fri, 5 Apr 2013 13:07:13 +0000
Subject: powerpc/mpc85xx: Clear L1 D-cache lock

dcbi instruction has been used to clear D-cache lock. However, the cache
lock is persistent for e6500 core. Use dcblc to clear the lock explicitly.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/start.S | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/powerpc')

diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index e413e4ae992..4f0480b7689 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -1906,6 +1906,7 @@ unlock_ram_in_cache:
 	slwi	r4,r4,(10 - 1 - L1_CACHE_SHIFT)
 	mtctr	r4
 1:	dcbi	r0,r3
+	dcblc	r0,r3
 	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
 	bdnz	1b
 	sync
-- 
cgit v1.2.3