From c3ab2744447db80de3c0a18422256a7b638253b3 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Sat, 23 Sep 2017 04:50:31 +1200 Subject: ARM: mvebu: handle unused DRAM banks with ECC enabled dram_ecc_scrubbing() had code to skip unused DRAM banks but it would not work because mvebu_sdram_bs() returns 0 and the code was subtracting 1 before checking the size. Remove the -1 from the bank size and the +1 from the total which will skip unused banks and still calculate the correct size. Put the -1 where it is needed for scrubbing via the xor engine. Reported-by: Joshua Scott Signed-off-by: Chris Packham Signed-off-by: Stefan Roese --- arch/arm/mach-mvebu/dram.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-mvebu/dram.c b/arch/arm/mach-mvebu/dram.c index 55e9ad726a8..e6349056188 100644 --- a/arch/arm/mach-mvebu/dram.c +++ b/arch/arm/mach-mvebu/dram.c @@ -179,11 +179,11 @@ static void dram_ecc_scrubbing(void) reg_write(REG_SDRAM_CONFIG_ADDR, temp); for (cs = 0; cs < CONFIG_NR_DRAM_BANKS; cs++) { - size = mvebu_sdram_bs(cs) - 1; + size = mvebu_sdram_bs(cs); if (size == 0) continue; - total = (u64)size + 1; + total = (u64)size; total_mem += (u32)(total / (1 << 30)); start_addr = 0; mv_xor_init2(cs); @@ -194,7 +194,7 @@ static void dram_ecc_scrubbing(void) size -= start_addr; } - mv_xor_mem_init(SCRB_XOR_CHAN, start_addr, size, + mv_xor_mem_init(SCRB_XOR_CHAN, start_addr, size - 1, SCRUB_MAGIC, SCRUB_MAGIC); /* Wait for previous transfer completion */ -- cgit v1.2.3