From 98f705c9cefdfdba62c069821bbba10273a0a8ed Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 27 Jun 2017 16:49:14 +0200 Subject: powerpc: remove 4xx support There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher --- board/amcc/yucca/yucca.h | 350 ----------------------------------------------- 1 file changed, 350 deletions(-) delete mode 100644 board/amcc/yucca/yucca.h (limited to 'board/amcc/yucca/yucca.h') diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h deleted file mode 100644 index ac9e5ae5b2f..00000000000 --- a/board/amcc/yucca/yucca.h +++ /dev/null @@ -1,350 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __YUCCA_H_ -#define __YUCCA_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/*----------------------------------------------------------------------------+ -| Defines -+----------------------------------------------------------------------------*/ - -#define TMR_FREQ_EXT 25000000 -#define BOARD_UART_CLOCK 11059200 - -#define BOARD_OPTION_SELECTED 1 -#define BOARD_OPTION_NOT_SELECTED 0 - -#define ENGINEERING_CLOCK_CHECKING "clk_chk" -#define ENGINEERING_EXTERNAL_CLOCK "ext_clk" - -#define ENGINEERING_CLOCK_CHECKING_DATA 1 -#define ENGINEERING_EXTERNAL_CLOCK_DATA 2 - -/* ethernet definition */ -#define MAX_ENETMODE_PARM 3 -#define ENETMODE_NEG 0 -#define ENETMODE_SPEED 1 -#define ENETMODE_DUPLEX 2 - -#define ENETMODE_AUTONEG 0 -#define ENETMODE_NO_AUTONEG 1 -#define ENETMODE_10 2 -#define ENETMODE_100 3 -#define ENETMODE_1000 4 -#define ENETMODE_HALF 5 -#define ENETMODE_FULL 6 - -#define NUM_TLB_ENTRIES 64 - -/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */ -#define MICRON_SPD_JEDEC_ID 0x2c - -/*----------------------------------------------------------------------------+ -| TLB specific defines. -+----------------------------------------------------------------------------*/ -#define TLB_256MB_ALIGN_MASK 0xF0000000 -#define TLB_16MB_ALIGN_MASK 0xFF000000 -#define TLB_1MB_ALIGN_MASK 0xFFF00000 -#define TLB_256KB_ALIGN_MASK 0xFFFC0000 -#define TLB_64KB_ALIGN_MASK 0xFFFF0000 -#define TLB_16KB_ALIGN_MASK 0xFFFFC000 -#define TLB_4KB_ALIGN_MASK 0xFFFFF000 -#define TLB_1KB_ALIGN_MASK 0xFFFFFC00 -#define TLB_256MB_SIZE 0x10000000 -#define TLB_16MB_SIZE 0x01000000 -#define TLB_1MB_SIZE 0x00100000 -#define TLB_256KB_SIZE 0x00040000 -#define TLB_64KB_SIZE 0x00010000 -#define TLB_16KB_SIZE 0x00004000 -#define TLB_4KB_SIZE 0x00001000 -#define TLB_1KB_SIZE 0x00000400 - -#define TLB_WORD0_EPN_MASK 0xFFFFFC00 -#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD0_V_MASK 0x00000200 -#define TLB_WORD0_V_ENABLE 0x00000200 -#define TLB_WORD0_V_DISABLE 0x00000000 -#define TLB_WORD0_TS_MASK 0x00000100 -#define TLB_WORD0_TS_1 0x00000100 -#define TLB_WORD0_TS_0 0x00000000 -#define TLB_WORD0_SIZE_MASK 0x000000F0 -#define TLB_WORD0_SIZE_1KB 0x00000000 -#define TLB_WORD0_SIZE_4KB 0x00000010 -#define TLB_WORD0_SIZE_16KB 0x00000020 -#define TLB_WORD0_SIZE_64KB 0x00000030 -#define TLB_WORD0_SIZE_256KB 0x00000040 -#define TLB_WORD0_SIZE_1MB 0x00000050 -#define TLB_WORD0_SIZE_16MB 0x00000070 -#define TLB_WORD0_SIZE_256MB 0x00000090 -#define TLB_WORD0_TPAR_MASK 0x0000000F -#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) -#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) - -#define TLB_WORD1_RPN_MASK 0xFFFFFC00 -#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) -#define TLB_WORD1_PAR1_MASK 0x00000300 -#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) -#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03) -#define TLB_WORD1_PAR1_0 0x00000000 -#define TLB_WORD1_PAR1_1 0x00000100 -#define TLB_WORD1_PAR1_2 0x00000200 -#define TLB_WORD1_PAR1_3 0x00000300 -#define TLB_WORD1_ERPN_MASK 0x0000000F -#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) -#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) - -#define TLB_WORD2_PAR2_MASK 0xC0000000 -#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30) -#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03) -#define TLB_WORD2_PAR2_0 0x00000000 -#define TLB_WORD2_PAR2_1 0x40000000 -#define TLB_WORD2_PAR2_2 0x80000000 -#define TLB_WORD2_PAR2_3 0xC0000000 -#define TLB_WORD2_U0_MASK 0x00008000 -#define TLB_WORD2_U0_ENABLE 0x00008000 -#define TLB_WORD2_U0_DISABLE 0x00000000 -#define TLB_WORD2_U1_MASK 0x00004000 -#define TLB_WORD2_U1_ENABLE 0x00004000 -#define TLB_WORD2_U1_DISABLE 0x00000000 -#define TLB_WORD2_U2_MASK 0x00002000 -#define TLB_WORD2_U2_ENABLE 0x00002000 -#define TLB_WORD2_U2_DISABLE 0x00000000 -#define TLB_WORD2_U3_MASK 0x00001000 -#define TLB_WORD2_U3_ENABLE 0x00001000 -#define TLB_WORD2_U3_DISABLE 0x00000000 -#define TLB_WORD2_W_MASK 0x00000800 -#define TLB_WORD2_W_ENABLE 0x00000800 -#define TLB_WORD2_W_DISABLE 0x00000000 -#define TLB_WORD2_I_MASK 0x00000400 -#define TLB_WORD2_I_ENABLE 0x00000400 -#define TLB_WORD2_I_DISABLE 0x00000000 -#define TLB_WORD2_M_MASK 0x00000200 -#define TLB_WORD2_M_ENABLE 0x00000200 -#define TLB_WORD2_M_DISABLE 0x00000000 -#define TLB_WORD2_G_MASK 0x00000100 -#define TLB_WORD2_G_ENABLE 0x00000100 -#define TLB_WORD2_G_DISABLE 0x00000000 -#define TLB_WORD2_E_MASK 0x00000080 -#define TLB_WORD2_E_ENABLE 0x00000080 -#define TLB_WORD2_E_DISABLE 0x00000000 -#define TLB_WORD2_UX_MASK 0x00000020 -#define TLB_WORD2_UX_ENABLE 0x00000020 -#define TLB_WORD2_UX_DISABLE 0x00000000 -#define TLB_WORD2_UW_MASK 0x00000010 -#define TLB_WORD2_UW_ENABLE 0x00000010 -#define TLB_WORD2_UW_DISABLE 0x00000000 -#define TLB_WORD2_UR_MASK 0x00000008 -#define TLB_WORD2_UR_ENABLE 0x00000008 -#define TLB_WORD2_UR_DISABLE 0x00000000 -#define TLB_WORD2_SX_MASK 0x00000004 -#define TLB_WORD2_SX_ENABLE 0x00000004 -#define TLB_WORD2_SX_DISABLE 0x00000000 -#define TLB_WORD2_SW_MASK 0x00000002 -#define TLB_WORD2_SW_ENABLE 0x00000002 -#define TLB_WORD2_SW_DISABLE 0x00000000 -#define TLB_WORD2_SR_MASK 0x00000001 -#define TLB_WORD2_SR_ENABLE 0x00000001 -#define TLB_WORD2_SR_DISABLE 0x00000000 - -/*----------------------------------------------------------------------------+ -| Board specific defines. -+----------------------------------------------------------------------------*/ -#define NONCACHE_MEMORY_SIZE (64*1024) -#define NONCACHE_AREA0_ENDOFFSET (64*1024) -#define NONCACHE_AREA1_ENDOFFSET (32*1024) - -#define FLASH_SECTORSIZE 0x00010000 - -/* SDRAM MICRON */ -#define SDRAM_MICRON 0x2C - -#define SDRAM_TRUE 1 -#define SDRAM_FALSE 0 -#define SDRAM_DDR1 1 -#define SDRAM_DDR2 2 -#define SDRAM_NONE 0 -#define MAXDIMMS 2 /* Changes le 12/01/05 pour 1.6 */ -#define MAXRANKS 4 /* Changes le 12/01/05 pour 1.6 */ -#define MAXBANKSPERDIMM 2 -#define MAXRANKSPERDIMM 2 -#define MAXBXCF 4 /* Changes le 12/01/05 pour 1.6 */ -#define MAXSDRAMMEMORY 0xFFFFFFFF /* 4GB */ -#define ERROR_STR_LENGTH 256 -#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ - -/*----------------------------------------------------------------------------+ -| SDR Configuration registers -+----------------------------------------------------------------------------*/ -/* Serial Device Strap Reg 0 */ -#define sdr_pstrp0 0x0040 - -#define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00000080 /* EBC Boot bus width Mask */ -#define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00000080 /* EBC 16 Bits */ -#define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */ - -#define SDR0_SDSTP1_BOOT_SEL_MASK 0x00080000 /* Boot device Selection Mask */ -#define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */ -#define SDR0_SDSTP1_BOOT_SEL_PCI 0x00080000 /* PCI */ - -#define SDR0_SDSTP1_EBC_SIZE_MASK 0x00000060 /* Boot rom size Mask */ -#define SDR0_SDSTP1_BOOT_SIZE_16MB 0x00000060 /* 16 MB */ -#define SDR0_SDSTP1_BOOT_SIZE_8MB 0x00000040 /* 8 MB */ -#define SDR0_SDSTP1_BOOT_SIZE_4MB 0x00000020 /* 4 MB */ -#define SDR0_SDSTP1_BOOT_SIZE_2MB 0x00000000 /* 2 MB */ - -/* Serial Device Enabled - Addr = 0xA8 */ -#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 -/* Serial Device Enabled - Addr = 0xA4 */ -#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 - -/* Pin Straps Reg */ -#define SDR0_PSTRP0 0x0040 -#define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ - -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ -#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ - -/* fpgareg - defines are in include/config/YUCCA.h */ - -#define SDR0_CUST0_ENET3_MASK 0x00000080 -#define SDR0_CUST0_ENET3_COPPER 0x00000000 -#define SDR0_CUST0_ENET3_FIBER 0x00000080 -#define SDR0_CUST0_RGMII3_MASK 0x00000070 -#define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4) -#define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07) -#define SDR0_CUST0_RGMII3_DISAB 0x00000000 -#define SDR0_CUST0_RGMII3_RTBI 0x00000040 -#define SDR0_CUST0_RGMII3_RGMII 0x00000050 -#define SDR0_CUST0_RGMII3_TBI 0x00000060 -#define SDR0_CUST0_RGMII3_GMII 0x00000070 -#define SDR0_CUST0_ENET2_MASK 0x00000008 -#define SDR0_CUST0_ENET2_COPPER 0x00000000 -#define SDR0_CUST0_ENET2_FIBER 0x00000008 -#define SDR0_CUST0_RGMII2_MASK 0x00000007 -#define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) -#define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07) -#define SDR0_CUST0_RGMII2_DISAB 0x00000000 -#define SDR0_CUST0_RGMII2_RTBI 0x00000004 -#define SDR0_CUST0_RGMII2_RGMII 0x00000005 -#define SDR0_CUST0_RGMII2_TBI 0x00000006 -#define SDR0_CUST0_RGMII2_GMII 0x00000007 - -#define ONE_MILLION 1000000 -#define ONE_BILLION 1000000000 - -/*----------------------------------------------------------------------------+ -| X -| XX -| XX XXX XXXXX XX XXX XXXXX -| XX XX X XXX XX XX -| XX XX XXXXXX XX XX -| XX XX X XX XX XX XX -| XXX XX XXXXX X XXXX XXX -+----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ -| Declare Configuration values -+----------------------------------------------------------------------------*/ - -typedef enum config_selection { - CONFIG_NOT_SELECTED, - CONFIG_SELECTED -} config_selection_t; - -typedef enum config_list { - UART2_IN_SERVICE_MODE, - CPU_TRACE_MODE, - UART1_CTS_RTS, - CONFIG_NB -} config_list_t; - -#define MAX_CONFIG_SELECT_NB 3 - -#define BOARD_INFO_UART2_IN_SERVICE_MODE 1 -#define BOARD_INFO_CPU_TRACE_MODE 2 -#define BOARD_INFO_UART1_CTS_RTS_MODE 4 - -void force_bup_config_selection(config_selection_t *confgi_select_P); -void update_config_selection_table(config_selection_t *config_select_P); -void display_config_selection(config_selection_t *config_select_P); - -/*----------------------------------------------------------------------------+ -| XX -| -| XXXX XX XXX XXX XXXX -| XX XX XX XX XX XX -| XX XXX XX XX XX XX XX -| XX XX XXXXX XX XX XX -| XXXX XX XXXX XXXX -| XXXX -| -| -| -| +------------------------------------------------------------------+ -| | GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O | -| +----------------------+------------------+-----+------------+-----+ -| | | | | | | -| | GPIO0_0 | PCIX0REQ2_N | I/O | TRCCLK | | -| | GPIO0_1 | PCIX0REQ3_N | I/O | TRCBS0 | | -| | GPIO0_2 | PCIX0GNT2_N | I/O | TRCBS1 | | -| | GPIO0_3 | PCIX0GNT3_N | I/O | TRCBS2 | | -| | GPIO0_4 | PCIX1REQ2_N | I/O | TRCES0 | | -| | GPIO0_5 | PCIX1REQ3_N | I/O | TRCES1 | | -| | GPIO0_6 | PCIX1GNT2_N | I/O | TRCES2 | NA | -| | GPIO0_7 | PCIX1GNT3_N | I/O | TRCES3 | NA | -| | GPIO0_8 | PERREADY | I | TRCES4 | NA | -| | GPIO0_9 | PERCS1_N | O | TRCTS0 | NA | -| | GPIO0_10 | PERCS2_N | O | TRCTS1 | NA | -| | GPIO0_11 | IRQ0 | I | TRCTS2 | NA | -| | GPIO0_12 | IRQ1 | I | TRCTS3 | NA | -| | GPIO0_13 | IRQ2 | I | TRCTS4 | NA | -| | GPIO0_14 | IRQ3 | I | TRCTS5 | NA | -| | GPIO0_15 | IRQ4 | I | TRCTS6 | NA | -| | GPIO0_16 | IRQ5 | I | UART2RX | I | -| | GPIO0_17 | PERBE0_N | O | UART2TX | O | -| | GPIO0_18 | PCI0GNT0_N | I/O | NA | NA | -| | GPIO0_19 | PCI0GNT1_N | I/O | NA | NA | -| | GPIO0_20 | PCI0REQ0_N | I/O | NA | NA | -| | GPIO0_21 | PCI0REQ1_N | I/O | NA | NA | -| | GPIO0_22 | PCI1GNT0_N | I/O | NA | NA | -| | GPIO0_23 | PCI1GNT1_N | I/O | NA | NA | -| | GPIO0_24 | PCI1REQ0_N | I/O | NA | NA | -| | GPIO0_25 | PCI1REQ1_N | I/O | NA | NA | -| | GPIO0_26 | PCI2GNT0_N | I/O | NA | NA | -| | GPIO0_27 | PCI2GNT1_N | I/O | NA | NA | -| | GPIO0_28 | PCI2REQ0_N | I/O | NA | NA | -| | GPIO0_29 | PCI2REQ1_N | I/O | NA | NA | -| | GPIO0_30 | UART1RX | I | NA | NA | -| | GPIO0_31 | UART1TX | O | NA | NA | -| | | | | | | -| +----------------------+------------------+-----+------------+-----+ -| -+----------------------------------------------------------------------------*/ - -unsigned long auto_calc_speed(void); -/*----------------------------------------------------------------------------+ -| Prototypes -+----------------------------------------------------------------------------*/ -void print_evb440spe_info(void); - -int onboard_pci_arbiter_selected(int core_pci); - -#ifdef __cplusplus -} -#endif -#endif /* __YUCCA_H_ */ -- cgit v1.2.3