From 1332a2a0694c8e10a5bade397cf83645b2c3fd7e Mon Sep 17 00:00:00 2001
From: Jean-Christophe PLAGNIOL-VILLARD
Date: Sat, 21 Mar 2009 21:07:59 +0100
Subject: at91sam9/at91cap: move common serial initialisation to cpu

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 board/atmel/at91sam9rlek/at91sam9rlek.c | 30 ++----------------------------
 1 file changed, 2 insertions(+), 28 deletions(-)

(limited to 'board/atmel/at91sam9rlek')

diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index b6fef9d6f5f..26395a251b9 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -26,6 +26,7 @@
 #include <asm/arch/at91sam9rl.h>
 #include <asm/arch/at91sam9rl_matrix.h>
 #include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
@@ -43,33 +44,6 @@ DECLARE_GLOBAL_DATA_PTR;
  * Miscelaneous platform dependent initialisations
  */
 
-static void at91sam9rlek_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
-	at91_set_A_periph(AT91_PIN_PA6, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0);
-#endif
-
-#ifdef CONFIG_USART1
-	at91_set_A_periph(AT91_PIN_PA11, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PA12, 0);		/* RXD1 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1);
-#endif
-
-#ifdef CONFIG_USART2
-	at91_set_A_periph(AT91_PIN_PA13, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PA14, 0);		/* RXD2 */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2);
-#endif
-
-#ifdef CONFIG_USART3	/* DBGU */
-	at91_set_A_periph(AT91_PIN_PA21, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PA22, 1);		/* DTXD */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
-#endif
-}
-
 #ifdef CONFIG_CMD_NAND
 static void at91sam9rlek_nand_hw_init(void)
 {
@@ -223,7 +197,7 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-	at91sam9rlek_serial_hw_init();
+	at91_serial_hw_init();
 #ifdef CONFIG_CMD_NAND
 	at91sam9rlek_nand_hw_init();
 #endif
-- 
cgit v1.2.3