From 4ebb9a589852841c65ae68e2f3f3d160df40d55e Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Sat, 11 Jun 2022 20:20:57 +0800 Subject: imx: imx8mm_icore: Enable SPL_DM_SERIAL Enable CONFIG_SPL_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Move preloader_console_init after spl_early_init to make sure driver model work. Signed-off-by: Peng Fan Reviewed-by: Fabio Estevam --- board/engicam/imx8mm/spl.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) (limited to 'board/engicam') diff --git a/board/engicam/imx8mm/spl.c b/board/engicam/imx8mm/spl.c index f9be769ec59..f75f2dc634c 100644 --- a/board/engicam/imx8mm/spl.c +++ b/board/engicam/imx8mm/spl.c @@ -54,19 +54,11 @@ int board_fit_config_name_match(const char *name) } #endif -#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) -static iomux_v3_cfg_t const uart_pads[] = { - IMX8MM_PAD_UART2_RXD_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - IMX8MM_PAD_UART2_TXD_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - int board_early_init_f(void) { - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); - - return 0; + return 0; } void board_init_f(ulong dummy) @@ -81,8 +73,6 @@ void board_init_f(ulong dummy) timer_init(); - preloader_console_init(); - /* Clear the BSS. */ memset(__bss_start, 0, __bss_end - __bss_start); @@ -92,6 +82,8 @@ void board_init_f(ulong dummy) hang(); } + preloader_console_init(); + enable_tzc380(); /* DDR initialization */ -- cgit v1.2.3