From e66be2d7e6e6976a94433dcad51b89a3c7aa410a Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 14 Oct 2020 17:12:05 +0800 Subject: doc: board: Convert i.MXRT1020 EVK README to reST Convert plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Peng Fan --- board/freescale/imxrt1020-evk/README | 31 ------------------------------- 1 file changed, 31 deletions(-) delete mode 100644 board/freescale/imxrt1020-evk/README (limited to 'board/freescale') diff --git a/board/freescale/imxrt1020-evk/README b/board/freescale/imxrt1020-evk/README deleted file mode 100644 index 9bc5bc00bc8..00000000000 --- a/board/freescale/imxrt1020-evk/README +++ /dev/null @@ -1,31 +0,0 @@ -How to use U-Boot on NXP i.MXRT1020 EVK ------------------------------------------------ - -- Build U-Boot for i.MXRT1020 EVK: - -$ make mrproper -$ make imxrt1020-evk_defconfig -$ make - -This will generate the SPL image called SPL and the u-boot.img. - -- Flash the SPL image into the micro SD card: - -sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync - -- Flash the u-boot.img image into the micro SD card: - -sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync - -- Jumper settings: - -SW8: 0 1 1 0 - -where 0 means bottom position and 1 means top position (from the -switch label numbers reference). - -- Connect the USB cable between the EVK and the PC for the console. -(The USB console connector is the one close the ethernet connector) - -- Insert the micro SD card in the board, power it up and U-Boot messages should -come up. -- cgit v1.2.3