From 064b55cfcb25c0f7692ecf6d4a38f12cd82739f7 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Wed, 14 Jun 2017 05:49:40 +0200 Subject: powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher --- board/inka4x0/Kconfig | 9 - board/inka4x0/MAINTAINERS | 6 - board/inka4x0/Makefile | 8 - board/inka4x0/inka4x0.c | 254 --------------------- board/inka4x0/inkadiag.c | 465 --------------------------------------- board/inka4x0/k4h511638c.h | 16 -- board/inka4x0/mt46v16m16-75.h | 16 -- board/inka4x0/mt46v32m16-75.h | 16 -- board/inka4x0/mt48lc16m16a2-75.h | 14 -- 9 files changed, 804 deletions(-) delete mode 100644 board/inka4x0/Kconfig delete mode 100644 board/inka4x0/MAINTAINERS delete mode 100644 board/inka4x0/Makefile delete mode 100644 board/inka4x0/inka4x0.c delete mode 100644 board/inka4x0/inkadiag.c delete mode 100644 board/inka4x0/k4h511638c.h delete mode 100644 board/inka4x0/mt46v16m16-75.h delete mode 100644 board/inka4x0/mt46v32m16-75.h delete mode 100644 board/inka4x0/mt48lc16m16a2-75.h (limited to 'board/inka4x0') diff --git a/board/inka4x0/Kconfig b/board/inka4x0/Kconfig deleted file mode 100644 index 94a41f01a53..00000000000 --- a/board/inka4x0/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_INKA4X0 - -config SYS_BOARD - default "inka4x0" - -config SYS_CONFIG_NAME - default "inka4x0" - -endif diff --git a/board/inka4x0/MAINTAINERS b/board/inka4x0/MAINTAINERS deleted file mode 100644 index e8cec73a1a9..00000000000 --- a/board/inka4x0/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -INKA4X0 BOARD -M: Anatolij Gustschin -S: Maintained -F: board/inka4x0/ -F: include/configs/inka4x0.h -F: configs/inka4x0_defconfig diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile deleted file mode 100644 index c9a35407998..00000000000 --- a/board/inka4x0/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2009 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := inka4x0.o inkadiag.o diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c deleted file mode 100644 index 88cae59e8f5..00000000000 --- a/board/inka4x0/inka4x0.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * (C) Copyright 2008-2009 - * Andreas Pfefferle, DENX Software Engineering, ap@denx.de. - * - * (C) Copyright 2009 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2004 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include - -#if defined(CONFIG_DDR_MT46V16M16) -#include "mt46v16m16-75.h" -#elif defined(CONFIG_SDR_MT48LC16M16A2) -#include "mt48lc16m16a2-75.h" -#elif defined(CONFIG_DDR_MT46V32M16) -#include "mt46v32m16.h" -#elif defined(CONFIG_DDR_HYB25D512160BF) -#include "hyb25d512160bf.h" -#elif defined(CONFIG_DDR_K4H511638C) -#include "k4h511638c.h" -#else -#error "INKA4x0 SDRAM: invalid chip type specified!" -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start (int hi_addr) -{ - volatile struct mpc5xxx_sdram *sdram = - (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit); - - /* precharge all banks */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); - -#if SDRAM_DDR - /* set mode register: extended mode */ - out_be32(&sdram->mode, SDRAM_EMODE); - - /* set mode register: reset DLL */ - out_be32(&sdram->mode, SDRAM_MODE | 0x04000000); -#endif - - /* precharge all banks */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); - - /* auto refresh */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit); - - /* set mode register */ - out_be32(&sdram->mode, SDRAM_MODE); - - /* normal operation */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - volatile struct mpc5xxx_mmap_ctl *mm = - (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; - volatile struct mpc5xxx_cdm *cdm = - (struct mpc5xxx_cdm *) MPC5XXX_CDM; - volatile struct mpc5xxx_sdram *sdram = - (struct mpc5xxx_sdram *) MPC5XXX_SDRAM; - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - long test1, test2; - - /* setup SDRAM chip selects */ - out_be32(&mm->sdram0, 0x0000001c); /* 512MB at 0x0 */ - out_be32(&mm->sdram1, 0x40000000); /* disabled */ - - /* setup config registers */ - out_be32(&sdram->config1, SDRAM_CONFIG1); - out_be32(&sdram->config2, SDRAM_CONFIG2); - -#if SDRAM_DDR - /* set tap delay */ - out_be32(&cdm->porcfg, SDRAM_TAPDELAY); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) { - dramsize = 0; - } - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - out_be32(&mm->sdram0, 0x13 + - __builtin_ffs(dramsize >> 20) - 1); - } else { - out_be32(&mm->sdram0, 0); /* disabled */ - } - - out_be32(&mm->sdram1, dramsize); /* disabled */ -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = in_be32(&mm->sdram0) & 0xFF; - if (dramsize >= 0x13) { - dramsize = (1 << (dramsize - 0x13)) << 20; - } else { - dramsize = 0; - } -#endif /* CONFIG_SYS_RAMBOOT */ - - gd->ram_size = dramsize; - - return 0; -} - -int checkboard (void) -{ - puts ("Board: INKA 4X0\n"); - return 0; -} - -void flash_preinit(void) -{ - volatile struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB; - - /* - * Now, when we are in RAM, enable flash write - * access for detection process. - * Note that CS_BOOT (CS0) cannot be cleared when - * executing in flash. - */ - clrbits_be32(&lpb->cs0_cfg, 0x1); /* clear RO */ -} - -int misc_init_f (void) -{ - volatile struct mpc5xxx_gpio *gpio = - (struct mpc5xxx_gpio *) MPC5XXX_GPIO; - volatile struct mpc5xxx_wu_gpio *wu_gpio = - (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO; - volatile struct mpc5xxx_gpt *gpt; - char tmp[10]; - int i, br; - - i = getenv_f("brightness", tmp, sizeof(tmp)); - br = (i > 0) - ? (int) simple_strtoul (tmp, NULL, 10) - : CONFIG_SYS_BRIGHTNESS; - if (br > 255) - br = 255; - - /* Initialize GPIO output pins. - */ - /* Configure GPT as GPIO output (and set them as they control low-active LEDs */ - for (i = 0; i <= 5; i++) { - gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (i * 0x10)); - out_be32(&gpt->emsr, 0x34); - } - - /* Configure GPT7 as PWM timer, 1kHz, no ints. */ - gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (7 * 0x10)); - out_be32(&gpt->emsr, 0); /* Disable */ - out_be32(&gpt->cir, 0x020000fe); - out_be32(&gpt->pwmcr, (br << 16)); - out_be32(&gpt->emsr, 0x3); /* Enable PWM mode and start */ - - /* Configure PSC3_6,7 as GPIO output */ - setbits_be32(&gpio->simple_gpioe, MPC5XXX_GPIO_SIMPLE_PSC3_6 | - MPC5XXX_GPIO_SIMPLE_PSC3_7); - setbits_be32(&gpio->simple_ddr, MPC5XXX_GPIO_SIMPLE_PSC3_6 | - MPC5XXX_GPIO_SIMPLE_PSC3_7); - - /* Configure PSC3_9 and GPIO_WKUP6,7 as GPIO output */ - setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_6 | - MPC5XXX_GPIO_WKUP_7 | - MPC5XXX_GPIO_WKUP_PSC3_9); - setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_6 | - MPC5XXX_GPIO_WKUP_7 | - MPC5XXX_GPIO_WKUP_PSC3_9); - - /* Set LR mirror bit because it is low-active */ - setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_7); - - /* Reset Coral-P graphics controller */ - setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC3_9); - - /* Enable display backlight */ - clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_8); - setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_8); - setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_8); - setbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_8); - - /* - * Configure three wire serial interface to RTC (PSC1_4, - * PSC2_4, PSC3_4, PSC3_5) - */ - setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_PSC1_4 | - MPC5XXX_GPIO_WKUP_PSC2_4); - setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_PSC1_4 | - MPC5XXX_GPIO_WKUP_PSC2_4); - clrbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC1_4); - clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_4 | - MPC5XXX_GPIO_SINT_PSC3_5); - setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_4 | - MPC5XXX_GPIO_SINT_PSC3_5); - setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_5); - clrbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_5); - - return 0; -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c deleted file mode 100644 index 4c432051298..00000000000 --- a/board/inka4x0/inkadiag.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * (C) Copyright 2008, 2009 Andreas Pfefferle, - * DENX Software Engineering, ap@denx.de. - * (C) Copyright 2009 Detlev Zundel, - * DENX Software Engineering, dzu@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include - -#include - -/* This is needed for the includes in ns16550.h */ -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#include - -#define GPIO_BASE ((u_char *)CONFIG_SYS_CS3_START) - -#define DIGIN_TOUCHSCR_MASK 0x00003000 /* Inputs 12-13 */ -#define DIGIN_KEYB_MASK 0x00010000 /* Input 16 */ - -#define DIGIN_DRAWER_SW1 0x00400000 /* Input 22 */ -#define DIGIN_DRAWER_SW2 0x00800000 /* Input 23 */ - -#define DIGIO_LED0 0x00000001 /* Output 0 */ -#define DIGIO_LED1 0x00000002 /* Output 1 */ -#define DIGIO_LED2 0x00000004 /* Output 2 */ -#define DIGIO_LED3 0x00000008 /* Output 3 */ -#define DIGIO_LED4 0x00000010 /* Output 4 */ -#define DIGIO_LED5 0x00000020 /* Output 5 */ - -#define DIGIO_DRAWER1 0x00000100 /* Output 8 */ -#define DIGIO_DRAWER2 0x00000200 /* Output 9 */ - -#define SERIAL_PORT_BASE ((u_char *)CONFIG_SYS_CS2_START) - -#define PSC_OP1_RTS 0x01 -#define PSC_OP0_RTS 0x01 - -/* - * Table with supported baudrates (defined in inka4x0.h) - */ -static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; -#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0])) - -static unsigned int inka_digin_get_input(void) -{ - return in_8(GPIO_BASE + 0) << 0 | in_8(GPIO_BASE + 1) << 8 | - in_8(GPIO_BASE + 2) << 16 | in_8(GPIO_BASE + 3) << 24; -} - -#define LED_HIGH(NUM) \ - do { \ - setbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \ - } while (0) - -#define LED_LOW(NUM) \ - do { \ - clrbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \ - } while (0) - -#define CHECK_LED(NUM) \ - do { \ - if (state & (1 << NUM)) { \ - LED_HIGH(NUM); \ - } else { \ - LED_LOW(NUM); \ - } \ - } while (0) - -static void inka_digio_set_output(unsigned int state, int which) -{ - volatile struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - - if (which == 0) { - /* other */ - CHECK_LED(0); - CHECK_LED(1); - CHECK_LED(2); - CHECK_LED(3); - CHECK_LED(4); - CHECK_LED(5); - } else { - if (which == 1) { - /* drawer1 */ - if (state) { - clrbits_be32(&gpio->simple_dvo, 0x1000); - udelay(1); - setbits_be32(&gpio->simple_dvo, 0x1000); - } else { - setbits_be32(&gpio->simple_dvo, 0x1000); - udelay(1); - clrbits_be32(&gpio->simple_dvo, 0x1000); - } - } - if (which == 2) { - /* drawer 2 */ - if (state) { - clrbits_be32(&gpio->simple_dvo, 0x2000); - udelay(1); - setbits_be32(&gpio->simple_dvo, 0x2000); - } else { - setbits_be32(&gpio->simple_dvo, 0x2000); - udelay(1); - clrbits_be32(&gpio->simple_dvo, 0x2000); - } - } - } - udelay(1); -} - -static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - unsigned int state, val; - - switch (argc) { - case 3: - /* Write a value */ - val = simple_strtol(argv[2], NULL, 16); - - if (strcmp(argv[1], "drawer1") == 0) { - inka_digio_set_output(val, 1); - } else if (strcmp(argv[1], "drawer2") == 0) { - inka_digio_set_output(val, 2); - } else if (strcmp(argv[1], "other") == 0) - inka_digio_set_output(val, 0); - else { - printf("Invalid argument: %s\n", argv[1]); - return -1; - } - /* fall through */ - case 2: - /* Read a value */ - state = inka_digin_get_input(); - - if (strcmp(argv[1], "drawer1") == 0) { - val = (state & DIGIN_DRAWER_SW1) >> (ffs(DIGIN_DRAWER_SW1) - 1); - } else if (strcmp(argv[1], "drawer2") == 0) { - val = (state & DIGIN_DRAWER_SW2) >> (ffs(DIGIN_DRAWER_SW2) - 1); - } else if (strcmp(argv[1], "other") == 0) { - val = ((state & DIGIN_KEYB_MASK) >> (ffs(DIGIN_KEYB_MASK) - 1)) - | (state & DIGIN_TOUCHSCR_MASK) >> (ffs(DIGIN_TOUCHSCR_MASK) - 2); - } else { - printf("Invalid argument: %s\n", argv[1]); - return -1; - } - printf("exit code: 0x%X\n", val); - return 0; - default: - return cmd_usage(cmdtp); - } - - return -1; -} - -DECLARE_GLOBAL_DATA_PTR; - -static int ser_init(volatile struct mpc5xxx_psc *psc, int baudrate) -{ - unsigned long baseclk; - int div; - - /* reset PSC */ - out_8(&psc->command, PSC_SEL_MODE_REG_1); - - /* select clock sources */ - - out_be16(&psc->psc_clock_select, 0); - baseclk = (gd->arch.ipb_clk + 16) / 32; - - /* switch to UART mode */ - out_be32(&psc->sicr, 0); - - /* configure parity, bit length and so on */ - - out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE); - out_8(&psc->mode, PSC_MODE_ONE_STOP); - - /* set up UART divisor */ - div = (baseclk + (baudrate / 2)) / baudrate; - out_8(&psc->ctur, (div >> 8) & 0xff); - out_8(&psc->ctlr, div & 0xff); - - /* disable all interrupts */ - out_be16(&psc->psc_imr, 0); - - /* reset and enable Rx/Tx */ - out_8(&psc->command, PSC_RST_RX); - out_8(&psc->command, PSC_RST_TX); - out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE); - - return 0; -} - -static void ser_putc(volatile struct mpc5xxx_psc *psc, const char c) -{ - /* Wait 1 second for last character to go. */ - int i = 0; - - while (!(psc->psc_status & PSC_SR_TXEMP) && (i++ < 1000000/10)) - udelay(10); - psc->psc_buffer_8 = c; - -} - -static int ser_getc(volatile struct mpc5xxx_psc *psc) -{ - /* Wait for a character to arrive. */ - int i = 0; - - while (!(in_be16(&psc->psc_status) & PSC_SR_RXRDY) && (i++ < 1000000/10)) - udelay(10); - - return in_8(&psc->psc_buffer_8); -} - -static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - volatile struct NS16550 *uart; - volatile struct mpc5xxx_psc *psc; - unsigned int num, mode; - int combrd, baudrate, i, j, len; - int address; - - if (argc < 5) - return cmd_usage(cmdtp); - - argc--; - argv++; - - num = simple_strtol(argv[0], NULL, 0); - if (num < 0 || num > 11) { - printf("invalid argument for num: %d\n", num); - return -1; - } - - mode = simple_strtol(argv[1], NULL, 0); - - combrd = 0; - baudrate = simple_strtoul(argv[2], NULL, 10); - for (i=0; i= 0) && (num <= 7)) { - if (mode & 1) { - /* turn on 'loopback' mode */ - out_8(&uart->mcr, UART_MCR_LOOP); - } else { - /* - * establish the UART's operational parameters - * set DLAB=1, so rbr accesses DLL - */ - out_8(&uart->lcr, UART_LCR_DLAB); - /* set baudrate */ - out_8(&uart->rbr, combrd); - /* set data-format: 8-N-1 */ - out_8(&uart->lcr, UART_LCR_WLS_8); - } - - if (mode & 2) { - /* set request to send */ - out_8(&uart->mcr, UART_MCR_RTS); - udelay(10); - /* check clear to send */ - if ((in_8(&uart->msr) & UART_MSR_CTS) == 0x00) - return -1; - } - if (mode & 4) { - /* set data terminal ready */ - out_8(&uart->mcr, UART_MCR_DTR); - udelay(10); - /* check data set ready and carrier detect */ - if ((in_8(&uart->msr) & (UART_MSR_DSR | UART_MSR_DCD)) - != (UART_MSR_DSR | UART_MSR_DCD)) - return -1; - } - - /* write each message-character, read it back, and display it */ - for (i = 0, len = strlen(argv[3]); i < len; ++i) { - j = 0; - while ((in_8(&uart->lsr) & UART_LSR_THRE) == 0x00) { - if (j++ > CONFIG_SYS_HZ) - break; - udelay(10); - } - out_8(&uart->rbr, argv[3][i]); - j = 0; - while ((in_8(&uart->lsr) & UART_LSR_DR) == 0x00) { - if (j++ > CONFIG_SYS_HZ) - break; - udelay(10); - } - printf("%c", in_8(&uart->rbr)); - } - printf("\n\n"); - out_8(&uart->mcr, 0x00); - } else { - address = 0; - - switch (num) { - case 8: - address = MPC5XXX_PSC6; - break; - case 9: - address = MPC5XXX_PSC3; - break; - case 10: - address = MPC5XXX_PSC2; - break; - case 11: - address = MPC5XXX_PSC1; - break; - } - psc = (struct mpc5xxx_psc *)address; - ser_init(psc, simple_strtol(argv[2], NULL, 0)); - if (mode & 2) { - /* set request to send */ - out_8(&psc->op0, PSC_OP0_RTS); - udelay(10); - /* check clear to send */ - if ((in_8(&psc->ip) & PSC_IPCR_CTS) == 0) - return -1; - } - len = strlen(argv[3]); - for (i = 0; i < len; ++i) { - ser_putc(psc, argv[3][i]); - printf("%c", ser_getc(psc)); - } - printf("\n\n"); - } - return 0; -} - -#define BUZZER_GPT (MPC5XXX_GPT + 0x60) /* GPT6 */ -static void buzzer_turn_on(unsigned int freq) -{ - volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT); - - const u32 prescale = gd->arch.ipb_clk / freq / 128; - const u32 count = 128; - const u32 width = 64; - - gpt->cir = (prescale << 16) | count; - gpt->pwmcr = width << 16; - gpt->emsr = 3; /* Timer enabled for PWM */ -} - -static void buzzer_turn_off(void) -{ - volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT); - - gpt->emsr = 0; -} - -static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - - unsigned int period, freq; - int prev, i; - - if (argc != 3) - return cmd_usage(cmdtp); - - argc--; - argv++; - - period = simple_strtol(argv[0], NULL, 0); - if (!period) - printf("Zero period is senseless\n"); - argc--; - argv++; - - freq = simple_strtol(argv[0], NULL, 0); - /* avoid zero prescale in buzzer_turn_on() */ - if (freq > gd->arch.ipb_clk / 128) { - printf("%dHz exceeds maximum (%ldHz)\n", freq, - gd->arch.ipb_clk / 128); - } else if (!freq) - printf("Zero frequency is senseless\n"); - else - buzzer_turn_on(freq); - - clear_ctrlc(); - prev = disable_ctrlc(0); - - printf("Buzzing for %d ms. Type ^C to abort!\n\n", period); - - i = 0; - while (!ctrlc() && (i++ < CONFIG_SYS_HZ)) - udelay(period); - - clear_ctrlc(); - disable_ctrlc(prev); - - buzzer_turn_off(); - - return 0; -} - -static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); - -cmd_tbl_t cmd_inkadiag_sub[] = { - U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input", - " [value] - get or set specified signal"), - U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port", - " - test uart num [0..11] in mode\n" - "and baudrate with msg"), - U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer", - " - turn buzzer on for period ms with freq hz"), - U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help", - "[command] - get help for command"), -}; - -static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, - int argc, char * const argv[]) { - extern int _do_help (cmd_tbl_t *cmd_start, int cmd_items, - cmd_tbl_t *cmdtp, int flag, - int argc, char * const argv[]); - /* do_help prints command name - we prepend inkadiag to our subcommands! */ -#ifdef CONFIG_SYS_LONGHELP - puts ("inkadiag "); -#endif - return _do_help(&cmd_inkadiag_sub[0], - ARRAY_SIZE(cmd_inkadiag_sub), cmdtp, flag, argc, argv); -} - -static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - cmd_tbl_t *c; - - c = find_cmd_tbl(argv[1], &cmd_inkadiag_sub[0], ARRAY_SIZE(cmd_inkadiag_sub)); - - if (c) { - argc--; - argv++; - return c->cmd(c, flag, argc, argv); - } else { - /* Unrecognized command */ - return cmd_usage(cmdtp); - } -} - -U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag, - "inkadiag - inka diagnosis\n", - "[inkadiag what ...]\n" - " - perform a diagnosis on inka hardware\n" - "'inkadiag' performs hardware tests."); diff --git a/board/inka4x0/k4h511638c.h b/board/inka4x0/k4h511638c.h deleted file mode 100644 index 054ddafd59b..00000000000 --- a/board/inka4x0/k4h511638c.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Semihalf - * Written by Marian Balakowicz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/inka4x0/mt46v16m16-75.h b/board/inka4x0/mt46v16m16-75.h deleted file mode 100644 index 23fc6f06be6..00000000000 --- a/board/inka4x0/mt46v16m16-75.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/inka4x0/mt46v32m16-75.h b/board/inka4x0/mt46v32m16-75.h deleted file mode 100644 index f16f450d017..00000000000 --- a/board/inka4x0/mt46v32m16-75.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Semihalf - * Written by Marian Balakowicz - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73711930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/inka4x0/mt48lc16m16a2-75.h b/board/inka4x0/mt48lc16m16a2-75.h deleted file mode 100644 index 0133eaa2ca9..00000000000 --- a/board/inka4x0/mt48lc16m16a2-75.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 0 /* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000 -- cgit v1.2.3