From e24ea55c04a8ee9c273dd879edda23bbde3d807a Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 May 2014 14:42:31 +0100 Subject: sunxi: mmc support On Mon, 2014-05-05 at 14:18 +0200, Stefan Roese wrote: > > + case 1: > > +#if CONFIG_MMC1_PG > Are you sure that this is correct and shouldn't be: > > +#ifdef CONFIG_MMC1_PG > > ? It's "correct" in so far as it works (the boards.cfg config stuff #defines things to 1), but I think you are right that it isn't the preferred style. But... > A quick scan through this patch series shows that this define > is not set at all. Perhaps its outdated? Or is it used to support > some other sunxi SoC? Not sure, perhaps it should be removed for > now. ...I had thought that it was to support some other board which wasn't being upstreamed right now, so eventually useful and harmless for now, but I've just checked and it isn't actually used by any of the boards in u-boot-sunxi.git. So rather than fix it to use #ifdef lets drop it. Rather than resend the entire series, here is v5.1 of this patch. > Other than this please add my: > > Reviewed-by: Stefan Roese Thanks! 8<--------------------------------- >From 20704e35a41664de5f516ed0e02981ac06085102 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Fri, 7 Mar 2014 04:29:39 +0000 Subject: [PATCH v5.1 7/8] sunxi: mmc support This adds support for the MMC controller on the Allwinner A20 (sun7i) processor. Signed-off-by: Henrik Nordstrom Signed-off-by: Luke Leighton Signed-off-by: Oliver Schinagl Signed-off-by: Wills Wang Signed-off-by: Ian Campbell Reviewed-by: Marek Vasut Reviewed-by: Stefan Roese Cc: Tom Cubie Cc: Aaron Maoye Cc: Pantelis Antoniou Reviewed-by: Tom Rini --- board/sunxi/board.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) (limited to 'board/sunxi/board.c') diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 328334ab024..b05d0b9b18c 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +45,67 @@ int dram_init(void) return 0; } +#ifdef CONFIG_GENERIC_MMC +static void mmc_pinmux_setup(int sdc) +{ + unsigned int pin; + + switch (sdc) { + case 0: + /* D1-PF0, D0-PF1, CLK-PF2, CMD-PF3, D3-PF4, D4-PF5 */ + for (pin = SUNXI_GPF(0); pin <= SUNXI_GPF(5); pin++) { + sunxi_gpio_set_cfgpin(pin, SUNXI_GPF0_SDC0); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 1: + /* CMD-PH22, CLK-PH23, D0~D3-PH24~27 : 5 */ + for (pin = SUNXI_GPH(22); pin <= SUNXI_GPH(27); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN4I_GPH22_SDC1); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 2: + /* CMD-PC6, CLK-PC7, D0-PC8, D1-PC9, D2-PC10, D3-PC11 */ + for (pin = SUNXI_GPC(6); pin <= SUNXI_GPC(11); pin++) { + sunxi_gpio_set_cfgpin(pin, SUNXI_GPC6_SDC2); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + case 3: + /* CMD-PI4, CLK-PI5, D0~D3-PI6~9 : 2 */ + for (pin = SUNXI_GPI(4); pin <= SUNXI_GPI(9); pin++) { + sunxi_gpio_set_cfgpin(pin, SUN4I_GPI4_SDC3); + sunxi_gpio_set_pull(pin, SUNXI_GPIO_PULL_UP); + sunxi_gpio_set_drv(pin, 2); + } + break; + + default: + printf("sunxi: invalid MMC slot %d for pinmux setup\n", sdc); + break; + } +} + +int board_mmc_init(bd_t *bis) +{ + mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT); + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT); +#if !defined (CONFIG_SPL_BUILD) && defined (CONFIG_MMC_SUNXI_SLOT_EXTRA) + mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT_EXTRA); + sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT_EXTRA); +#endif + + return 0; +} +#endif + #ifdef CONFIG_SPL_BUILD void sunxi_board_init(void) { -- cgit v1.2.3