From 10ed93dcddeede4e305235367c402fb99e063ef3 Mon Sep 17 00:00:00 2001 From: John Rigby Date: Tue, 31 Jul 2012 08:59:31 +0000 Subject: u8500: Separating mmc config parameters from driver Configuration in vexpress and u8500.v1 is different from what is needed in u8500.v2. As such, card configuration specifics need to reside in the board file rather than the driver. Signed-off-by: John Rigby Signed-off-by: Mathieu Poirier Signed-off-by: Tom Rini --- board/armltd/vexpress/ca9x4_ct_vxp.c | 21 +++++++- board/st-ericsson/snowball/snowball.c | 92 ++++++++++++++++++++++++++++++++++- board/st-ericsson/u8500/u8500_href.c | 22 +++++++-- 3 files changed, 130 insertions(+), 5 deletions(-) (limited to 'board') diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c index 0b36d1280a8..d5e109ec067 100644 --- a/board/armltd/vexpress/ca9x4_ct_vxp.c +++ b/board/armltd/vexpress/ca9x4_ct_vxp.c @@ -33,6 +33,8 @@ * MA 02111-1307 USA */ #include +#include +#include #include #include #include @@ -90,8 +92,25 @@ int board_eth_init(bd_t *bis) int cpu_mmc_init(bd_t *bis) { int rc = 0; + (void) bis; #ifdef CONFIG_ARM_PL180_MMCI - rc = arm_pl180_mmci_init(); + struct pl180_mmc_host *host; + + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + strcpy(host->name, "MMC"); + host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; + host->pwr_init = INIT_PWR; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; + host->voltages = VOLTAGE_WINDOW_MMC; + host->caps = 0; + host->clock_in = ARM_MCLK; + host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); + host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; + rc = arm_pl180_mmci_init(host); #endif return rc; } diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c index 67fc5dfff1e..8c743c0adb0 100644 --- a/board/st-ericsson/snowball/snowball.c +++ b/board/st-ericsson/snowball/snowball.c @@ -29,6 +29,9 @@ #include #include +#ifdef CONFIG_MMC +#include "../../../drivers/mmc/arm_pl180_mmci.h" +#endif #include "db8500_pins.h" /* @@ -250,9 +253,96 @@ int board_late_init(void) if ((raise_ab8500_gpio16() < 0)) printf("error: cant' raise GPIO16\n"); + return 0; +} + #ifdef CONFIG_MMC +/* + * emmc_host_init - initialize the emmc controller. + * Configure GPIO settings, set initial clock and power for emmc slot. + * Initialize mmc struct and register with mmc framework. + */ +static int emmc_host_init(void) +{ + struct pl180_mmc_host *host; + + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + host->base = (struct sdi_registers *)CFG_EMMC_BASE; + host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | + SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; + strcpy(host->name, "EMMC"); + host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz; + host->voltages = VOLTAGE_WINDOW_MMC; + host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); + host->clock_max = ARM_MCLK / 2; + host->clock_in = ARM_MCLK; + host->version2 = 1; + + return arm_pl180_mmci_init(host); +} + +/* + * mmc_host_init - initialize the external mmc controller. + * Configure GPIO settings, set initial clock and power for mmc slot. + * Initialize mmc struct and register with mmc framework. + */ +static int mmc_host_init(void) +{ + struct pl180_mmc_host *host; + u32 sdi_u32; + + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + host->base = (struct sdi_registers *)CFG_MMC_BASE; + sdi_u32 = 0xBF; + writel(sdi_u32, &host->base->power); + host->pwr_init = 0xBF; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | + SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN; + strcpy(host->name, "MMC"); + host->caps = MMC_MODE_8BIT; + host->b_max = 0; + host->voltages = VOLTAGE_WINDOW_SD; + host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2); + host->clock_max = ARM_MCLK / 2; + host->clock_in = ARM_MCLK; + host->version2 = 1; + + return arm_pl180_mmci_init(host); +} + +/* + * board_mmc_init - initialize all the mmc/sd host controllers. + * Called by generic mmc framework. + */ +int board_mmc_init(bd_t *bis) +{ + int error; + + (void) bis; + + error = emmc_host_init(); + if (error) { + printf("emmc_host_init() %d\n", error); + return -1; + } + u8500_mmc_power_init(); -#endif /* CONFIG_MMC */ + + error = mmc_host_init(); + if (error) { + printf("mmc_host_init() %d\n", error); + return -1; + } return 0; } +#endif /* CONFIG_MMC */ diff --git a/board/st-ericsson/u8500/u8500_href.c b/board/st-ericsson/u8500/u8500_href.c index 3de80dfd691..ec559e33e00 100644 --- a/board/st-ericsson/u8500/u8500_href.c +++ b/board/st-ericsson/u8500/u8500_href.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -374,12 +375,27 @@ static int u8500_mmci_board_init(void) int board_mmc_init(bd_t *bd) { + struct pl180_mmc_host *host; + if (u8500_mmci_board_init()) return -ENODEV; - if (arm_pl180_mmci_init()) - return -ENODEV; - return 0; + host = malloc(sizeof(struct pl180_mmc_host)); + if (!host) + return -ENOMEM; + memset(host, 0, sizeof(*host)); + + strcpy(host->name, "MMC"); + host->base = (struct sdi_registers *)CONFIG_ARM_PL180_MMCI_BASE; + host->pwr_init = INIT_PWR; + host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN; + host->voltages = VOLTAGE_WINDOW_MMC; + host->caps = 0; + host->clock_in = ARM_MCLK; + host->clock_min = ARM_MCLK / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1)); + host->clock_max = CONFIG_ARM_PL180_MMCI_CLOCK_FREQ; + + return arm_pl180_mmci_init(host); } #endif -- cgit v1.2.3