From 3ceecef14e2258157c846b3aaa26d7cdcd833b05 Mon Sep 17 00:00:00 2001 From: Stephan Linz Date: Sat, 25 Feb 2012 00:48:34 +0000 Subject: microblaze: Wire up LL_TEMAC driver initialization Initialize ll_temac driver. Reported-by: Michal Simek Signed-off-by: Stephan Linz --- .../xilinx/microblaze-generic/microblaze-generic.c | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'board') diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index c4c13a66827..a1e2bfee872 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -90,5 +90,41 @@ int board_eth_init(bd_t *bis) ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, txpp, rxpp); #endif + +#ifdef CONFIG_XILINX_LL_TEMAC +# ifdef XILINX_LLTEMAC_BASEADDR +# ifdef XILINX_LLTEMAC_FIFO_BASEADDR + ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR, + XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR); +# elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR +# if XILINX_LLTEMAC_SDMA_USE_DCR == 1 + ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR, + XILINX_LL_TEMAC_M_SDMA_DCR, + XILINX_LLTEMAC_SDMA_CTRL_BASEADDR); +# else + ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR, + XILINX_LL_TEMAC_M_SDMA_PLB, + XILINX_LLTEMAC_SDMA_CTRL_BASEADDR); +# endif +# endif +# endif +# ifdef XILINX_LLTEMAC_BASEADDR1 +# ifdef XILINX_LLTEMAC_FIFO_BASEADDR1 + ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1, + XILINX_LL_TEMAC_M_FIFO, XILINX_LLTEMAC_FIFO_BASEADDR1); +# elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1 +# if XILINX_LLTEMAC_SDMA_USE_DCR == 1 + ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1, + XILINX_LL_TEMAC_M_SDMA_DCR, + XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1); +# else + ret |= xilinx_ll_temac_eth_init(bis, XILINX_LLTEMAC_BASEADDR1, + XILINX_LL_TEMAC_M_SDMA_PLB, + XILINX_LLTEMAC_SDMA_CTRL_BASEADDR1); +# endif +# endif +# endif +#endif + return ret; } -- cgit v1.2.3