From 4c531d9f58b19442780f9b209ab4ec23addd044a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 11 Jun 2021 04:09:56 +0200 Subject: fit: Load DTO into temporary buffer and ignore load address The current fitImage DTO implementation expects each fitImage image subnode containing DTO to have 'load' property, pointing somewhere into memory where the DTO will be loaded. The address in the 'load' property must be different then the base DT load address and there must be sufficient amount of space between those two addresses. Selecting and using such hard-coded addresses is fragile, error prone and difficult to port even across devices with the same SoC and different DRAM sizes. The DTO cannot be applied in-place because fdt_overlay_apply_verbose() modifies the DTO when applying it onto the base DT, so if the DTO was used in place within the fitImage, call to fdt_overlay_apply_verbose() would corrupt the fitImage. Instead of copying the DTO to a specific hard-coded load address, allocate a buffer, copy the DTO into that buffer, apply the DTO onto the base DT, and free the buffer. The upside of this approach is that it is no longer necessary to select and hard-code specific DTO load address into the DTO. The slight downside is the new malloc()/free() overhead for each DTO, but that is negligible (*). (*) on iMX8MM/MN and STM32MP1 Signed-off-by: Marek Vasut Cc: Pantelis Antoniou Cc: Simon Glass Reviewed-by: Simon Glass [trini: Add ] Signed-off-by: Tom Rini --- common/image-fit.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) (limited to 'common') diff --git a/common/image-fit.c b/common/image-fit.c index 0c5a05948d1..e9b455deadb 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -17,6 +17,7 @@ #include #else #include +#include #include #include #include @@ -2267,10 +2268,10 @@ int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, ulong load, len; #ifdef CONFIG_OF_LIBFDT_OVERLAY ulong image_start, image_end; - ulong ovload, ovlen; + ulong ovload, ovlen, ovcopylen; const char *uconfig; const char *uname; - void *base, *ov; + void *base, *ov, *ovcopy = NULL; int i, err, noffset, ov_noffset; #endif @@ -2360,7 +2361,7 @@ int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, addr, &uname, &uconfig, arch, IH_TYPE_FLATDT, BOOTSTAGE_ID_FIT_FDT_START, - FIT_LOAD_REQUIRED, &ovload, &ovlen); + FIT_LOAD_IGNORED, &ovload, &ovlen); if (ov_noffset < 0) { printf("load of %s failed\n", uname); continue; @@ -2369,6 +2370,21 @@ int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, uname, ovload, ovlen); ov = map_sysmem(ovload, ovlen); + ovcopylen = ALIGN(fdt_totalsize(ov), SZ_4K); + ovcopy = malloc(ovcopylen); + if (!ovcopy) { + printf("failed to duplicate DTO before application\n"); + fdt_noffset = -ENOMEM; + goto out; + } + + err = fdt_open_into(ov, ovcopy, ovcopylen); + if (err < 0) { + printf("failed on fdt_open_into for DTO\n"); + fdt_noffset = err; + goto out; + } + base = map_sysmem(load, len + ovlen); err = fdt_open_into(base, base, len + ovlen); if (err < 0) { @@ -2376,14 +2392,18 @@ int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, fdt_noffset = err; goto out; } + /* the verbose method prints out messages on error */ - err = fdt_overlay_apply_verbose(base, ov); + err = fdt_overlay_apply_verbose(base, ovcopy); if (err < 0) { fdt_noffset = err; goto out; } fdt_pack(base); len = fdt_totalsize(base); + + free(ovcopy); + ovcopy = NULL; } #else printf("config with overlays but CONFIG_OF_LIBFDT_OVERLAY not set\n"); @@ -2400,6 +2420,10 @@ out: if (fit_uname_configp) *fit_uname_configp = fit_uname_config; +#ifdef CONFIG_OF_LIBFDT_OVERLAY + if (ovcopy) + free(ovcopy); +#endif if (fit_uname_config_copy) free(fit_uname_config_copy); return fdt_noffset; -- cgit v1.2.3