From 54e3316ffa46bd81e55216cd5aa5f087e9de9f8f Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Sun, 3 Jun 2018 16:21:27 +1200 Subject: ARM: kirkwood: SBx81LIFKW: Enable network hardware The SBx81LIFKW boards connect to the internal chassis management network via a Marvell 88e6097 L2 switch. The chassis connections are direct serdes on ports 8 and 9 with a RGMII interface on port 10 connected to the CPU MAC. For debugging purposes ports 0 and 1 are also taken out to headers on the board. Because the debug interfaces are sometimes connected to with straight ribbon cables we need to run them at 10Mbps. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- configs/SBx81LIFKW_defconfig | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'configs/SBx81LIFKW_defconfig') diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index ec9df1ac691..348f861a143 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_SF=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_NTPSERVER=y +CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_SNTP=y CONFIG_OF_CONTROL=y @@ -29,5 +30,10 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_MV88E61XX_SWITCH=y +CONFIG_MV88E61XX_CPU_PORT=10 +CONFIG_MV88E61XX_PHY_PORTS=0x003 +CONFIG_MV88E61XX_FIXED_PORTS=0x300 CONFIG_SPI=y CONFIG_KIRKWOOD_SPI=y -- cgit v1.2.3