From 1d0cb86eb9d6c278d1491fb822c60b9ac695d2b8 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 24 Apr 2018 13:00:34 +0200 Subject: ARM: rmobile: Enable HS200 support on M3N Salvator-X Enable the HS200 support on M3N Salvator-X . Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- configs/r8a77965_salvator-x_defconfig | 3 +++ 1 file changed, 3 insertions(+) (limited to 'configs') diff --git a/configs/r8a77965_salvator-x_defconfig b/configs/r8a77965_salvator-x_defconfig index 986c076d518..fdce7f7c652 100644 --- a/configs/r8a77965_salvator-x_defconfig +++ b/configs/r8a77965_salvator-x_defconfig @@ -39,6 +39,9 @@ CONFIG_RCAR_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_RCAR_IIC=y CONFIG_DM_MMC=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS200_SUPPORT=y CONFIG_RENESAS_SDHI=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y -- cgit v1.2.3 From e6027e6f45ff6924ee5b068f3fff628ecaacadc9 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 23 Apr 2018 20:24:06 +0200 Subject: ARM: rmobile: Update H2 Lager The H2 Lager port was broken since some time. This patch updates the H2 Lager port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- arch/arm/dts/r8a7790-lager-u-boot.dts | 4 + arch/arm/mach-rmobile/Kconfig.32 | 3 + board/renesas/lager/Makefile | 6 +- board/renesas/lager/lager.c | 206 +++++------------- board/renesas/lager/lager_spl.c | 396 ++++++++++++++++++++++++++++++++++ configs/lager_defconfig | 49 ++++- include/configs/lager.h | 65 ++---- 7 files changed, 526 insertions(+), 203 deletions(-) create mode 100644 board/renesas/lager/lager_spl.c (limited to 'configs') diff --git a/arch/arm/dts/r8a7790-lager-u-boot.dts b/arch/arm/dts/r8a7790-lager-u-boot.dts index a3f15777a6d..a42d61c450c 100644 --- a/arch/arm/dts/r8a7790-lager-u-boot.dts +++ b/arch/arm/dts/r8a7790-lager-u-boot.dts @@ -8,3 +8,7 @@ #include "r8a7790-lager.dts" #include "r8a7790-u-boot.dtsi" + +&scif0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32 index a8835f6571c..d8c6a8bac92 100644 --- a/arch/arm/mach-rmobile/Kconfig.32 +++ b/arch/arm/mach-rmobile/Kconfig.32 @@ -55,6 +55,9 @@ config TARGET_LAGER bool "Lager board" select DM select DM_SERIAL + select SUPPORT_SPL + select USE_TINY_PRINTF + select SPL_TINY_MEMSET config TARGET_KZM9G bool "KZM9D board" diff --git a/board/renesas/lager/Makefile b/board/renesas/lager/Makefile index 0e44c69fd6a..379368fdfce 100644 --- a/board/renesas/lager/Makefile +++ b/board/renesas/lager/Makefile @@ -6,4 +6,8 @@ # SPDX-License-Identifier: GPL-2.0 # -obj-y := lager.o qos.o ../rcar-common/common.o +ifdef CONFIG_SPL_BUILD +obj-y := lager_spl.o +else +obj-y := lager.o qos.o +endif diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c index 3566bcc7889..505efb5bc46 100644 --- a/board/renesas/lager/lager.c +++ b/board/renesas/lager/lager.c @@ -57,105 +57,60 @@ void s_init(void) qos_init(); } -#define TMU0_MSTP125 (1 << 25) -#define SCIF0_MSTP721 (1 << 21) -#define ETHER_MSTP813 (1 << 13) -#define MMC1_MSTP305 (1 << 5) +#define TMU0_MSTP125 BIT(25) -#define MSTPSR3 0xE6150048 -#define SMSTPCR3 0xE615013C -#define SDHI0_MSTP314 (1 << 14) -#define SDHI1_MSTP313 (1 << 13) -#define SDHI2_MSTP312 (1 << 12) - -#define SD2CKCR 0xE6150078 -#define SD2_97500KHZ 0x7 +#define SD1CKCR 0xE6150078 +#define SD2CKCR 0xE615026C +#define SD_97500KHZ 0x7 int board_early_init_f(void) { - /* TMU0 */ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); - /* SCIF0 */ - mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); - /* ETHER */ - mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); - /* eMMC */ - mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC1_MSTP305); - /* SDHI0, 2 */ - mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI0_MSTP314 | SDHI2_MSTP312); /* * SD0 clock is set to 97.5MHz by default. - * Set SD2 to the 97.5MHz as well. + * Set SD1 and SD2 to the 97.5MHz as well. */ - writel(SD2_97500KHZ, SD2CKCR); + writel(SD_97500KHZ, SD1CKCR); + writel(SD_97500KHZ, SD2CKCR); return 0; } -DECLARE_GLOBAL_DATA_PTR; +#define ETHERNET_PHY_RESET 185 /* GPIO 5 31 */ + int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - /* Init PFC controller */ - r8a7790_pinmux_init(); - - /* ETHER Enable */ - gpio_request(GPIO_FN_ETH_CRS_DV, NULL); - gpio_request(GPIO_FN_ETH_RX_ER, NULL); - gpio_request(GPIO_FN_ETH_RXD0, NULL); - gpio_request(GPIO_FN_ETH_RXD1, NULL); - gpio_request(GPIO_FN_ETH_LINK, NULL); - gpio_request(GPIO_FN_ETH_REF_CLK, NULL); - gpio_request(GPIO_FN_ETH_MDIO, NULL); - gpio_request(GPIO_FN_ETH_TXD1, NULL); - gpio_request(GPIO_FN_ETH_TX_EN, NULL); - gpio_request(GPIO_FN_ETH_MAGIC, NULL); - gpio_request(GPIO_FN_ETH_TXD0, NULL); - gpio_request(GPIO_FN_ETH_MDC, NULL); - gpio_request(GPIO_FN_IRQ0, NULL); - - gpio_request(GPIO_GP_5_31, NULL); /* PHY_RST */ - gpio_direction_output(GPIO_GP_5_31, 0); - mdelay(20); - gpio_set_value(GPIO_GP_5_31, 1); - udelay(1); + /* Force ethernet PHY out of reset */ + gpio_request(ETHERNET_PHY_RESET, "phy_reset"); + gpio_direction_output(ETHERNET_PHY_RESET, 0); + mdelay(10); + gpio_direction_output(ETHERNET_PHY_RESET, 1); return 0; } -#define CXR24 0xEE7003C0 /* MAC address high register */ -#define CXR25 0xEE7003C8 /* MAC address low register */ -int board_eth_init(bd_t *bis) +int dram_init(void) { - int ret = -ENODEV; - -#ifdef CONFIG_SH_ETHER - u32 val; - unsigned char enetaddr[6]; + if (fdtdec_setup_memory_size() != 0) + return -EINVAL; - ret = sh_eth_initialize(bis); - if (!eth_env_get_enetaddr("ethaddr", enetaddr)) - return ret; - - /* Set Mac address */ - val = enetaddr[0] << 24 | enetaddr[1] << 16 | - enetaddr[2] << 8 | enetaddr[3]; - writel(val, CXR24); - - val = enetaddr[4] << 8 | enetaddr[5]; - writel(val, CXR25); + return 0; +} -#endif +int dram_init_banksize(void) +{ + fdtdec_setup_memory_banksize(); - return ret; + return 0; } -/* lager has KSZ8041NL/RNL */ -#define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +/* KSZ8041NL/RNL */ +#define PHY_CONTROL1 0x1E +#define PHY_LED_MODE 0xC0000 #define PHY_LED_MODE_ACK 0x4000 int board_phy_config(struct phy_device *phydev) { @@ -167,97 +122,44 @@ int board_phy_config(struct phy_device *phydev) return 0; } -int board_mmc_init(bd_t *bis) +const struct rmobile_sysinfo sysinfo = { + CONFIG_ARCH_RMOBILE_BOARD_STRING +}; + +void reset_cpu(ulong addr) { - int ret = -ENODEV; - -#ifdef CONFIG_SH_MMCIF - gpio_request(GPIO_FN_MMC1_D0, NULL); - gpio_request(GPIO_FN_MMC1_D1, NULL); - gpio_request(GPIO_FN_MMC1_D2, NULL); - gpio_request(GPIO_FN_MMC1_D3, NULL); - gpio_request(GPIO_FN_MMC1_D4, NULL); - gpio_request(GPIO_FN_MMC1_D5, NULL); - gpio_request(GPIO_FN_MMC1_D6, NULL); - gpio_request(GPIO_FN_MMC1_D7, NULL); - gpio_request(GPIO_FN_MMC1_CLK, NULL); - gpio_request(GPIO_FN_MMC1_CMD, NULL); - - ret = mmcif_mmc_init(); -#endif - -#ifdef CONFIG_SH_SDHI - gpio_request(GPIO_FN_SD0_DAT0, NULL); - gpio_request(GPIO_FN_SD0_DAT1, NULL); - gpio_request(GPIO_FN_SD0_DAT2, NULL); - gpio_request(GPIO_FN_SD0_DAT3, NULL); - gpio_request(GPIO_FN_SD0_CLK, NULL); - gpio_request(GPIO_FN_SD0_CMD, NULL); - gpio_request(GPIO_FN_SD0_CD, NULL); - gpio_request(GPIO_FN_SD2_DAT0, NULL); - gpio_request(GPIO_FN_SD2_DAT1, NULL); - gpio_request(GPIO_FN_SD2_DAT2, NULL); - gpio_request(GPIO_FN_SD2_DAT3, NULL); - gpio_request(GPIO_FN_SD2_CLK, NULL); - gpio_request(GPIO_FN_SD2_CMD, NULL); - gpio_request(GPIO_FN_SD2_CD, NULL); + struct udevice *dev; + const u8 pmic_bus = 2; + const u8 pmic_addr = 0x58; + u8 data; + int ret; - /* - * SDHI 0 - * need JP3 set to pin-1 side on board. - */ - gpio_request(GPIO_GP_5_24, NULL); - gpio_request(GPIO_GP_5_29, NULL); - gpio_direction_output(GPIO_GP_5_24, 1); /* power on */ - gpio_direction_output(GPIO_GP_5_29, 1); /* 1: 3.3V, 0: 1.8V */ + ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev); + if (ret) + hang(); - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0, - SH_SDHI_QUIRK_16BIT_BUF); + ret = dm_i2c_read(dev, 0x13, &data, 1); if (ret) - return ret; + hang(); - /* SDHI 2 */ - gpio_request(GPIO_GP_5_25, NULL); - gpio_request(GPIO_GP_5_30, NULL); - gpio_direction_output(GPIO_GP_5_25, 1); /* power on */ - gpio_direction_output(GPIO_GP_5_30, 1); /* 1: 3.3V, 0: 1.8V */ + data |= BIT(1); - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 2, 0); -#endif - return ret; + ret = dm_i2c_write(dev, 0x13, &data, 1); + if (ret) + hang(); } - -int dram_init(void) +enum env_location env_get_location(enum env_operation op, int prio) { - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + const u32 load_magic = 0xb33fc0de; - return 0; -} + /* Block environment access if loaded using JTAG */ + if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) && + (op != ENVOP_INIT)) + return ENVL_UNKNOWN; -const struct rmobile_sysinfo sysinfo = { - CONFIG_ARCH_RMOBILE_BOARD_STRING -}; - -void reset_cpu(ulong addr) -{ - u8 val; + if (prio) + return ENVL_UNKNOWN; - i2c_set_bus_num(3); /* PowerIC connected to ch3 */ - i2c_init(400000, 0); - i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); - val |= 0x02; - i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); + return ENVL_SPI_FLASH; } - -static const struct sh_serial_platdata serial_platdata = { - .base = SCIF0_BASE, - .type = PORT_SCIF, - .clk = 14745600, - .clk_mode = EXT_CLK, -}; - -U_BOOT_DEVICE(lager_serials) = { - .name = "serial_sh", - .platdata = &serial_platdata, -}; diff --git a/board/renesas/lager/lager_spl.c b/board/renesas/lager/lager_spl.c new file mode 100644 index 00000000000..5730eb2f1ef --- /dev/null +++ b/board/renesas/lager/lager_spl.c @@ -0,0 +1,396 @@ +/* + * board/renesas/lager/lager_spl.c + * + * Copyright (C) 2018 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define TMU0_MSTP125 BIT(25) +#define SCIF0_MSTP721 BIT(21) +#define QSPI_MSTP917 BIT(17) + +#define SD2CKCR 0xE615026C +#define SD_97500KHZ 0x7 + +struct reg_config { + u16 off; + u32 val; +}; + +static void dbsc_wait(u16 reg) +{ + static const u32 dbsc3_0_base = DBSC3_0_BASE; + + while (!(readl(dbsc3_0_base + reg) & BIT(0))) + ; +} + +static void spl_init_sys(void) +{ + u32 r0 = 0; + + writel(0xa5a5a500, 0xe6020004); + writel(0xa5a5a500, 0xe6030004); + + asm volatile( + /* ICIALLU - Invalidate I$ to PoU */ + "mcr 15, 0, %0, cr7, cr5, 0 \n" + /* BPIALL - Invalidate branch predictors */ + "mcr 15, 0, %0, cr7, cr5, 6 \n" + /* Set SCTLR[IZ] */ + "mrc 15, 0, %0, cr1, cr0, 0 \n" + "orr %0, #0x1800 \n" + "mcr 15, 0, %0, cr1, cr0, 0 \n" + "isb sy \n" + :"=r"(r0)); +} + +static void spl_init_pfc(void) +{ + static const struct reg_config pfc_with_unlock[] = { + { 0x0090, 0x00000000 }, + { 0x0094, 0x00000000 }, + { 0x0098, 0xc0000000 }, + { 0x0020, 0x00000000 }, + { 0x0024, 0x00000000 }, + { 0x0028, 0x00000000 }, + { 0x002c, 0x20000000 }, + { 0x0030, 0x00001249 }, + { 0x0034, 0x00000278 }, + { 0x0038, 0x00000841 }, + { 0x003c, 0x00000000 }, + { 0x0040, 0x00000000 }, + { 0x0044, 0x10000000 }, + { 0x0048, 0x00000001 }, + { 0x004c, 0x0004aab0 }, + { 0x0050, 0x37301b00 }, + { 0x0054, 0x00048da3 }, + { 0x0058, 0x089044a1 }, + { 0x005c, 0x2a3a55b4 }, + { 0x0160, 0x00000003 }, + { 0x0004, 0xffffffff }, + { 0x0008, 0x2aef3fff }, + { 0x000c, 0x3fffffff }, + { 0x0010, 0xff7fc07f }, + { 0x0014, 0x7f3ff3f8 }, + { 0x0018, 0x1cfdfff7 }, + }; + + static const struct reg_config pfc_without_unlock[] = { + { 0x0100, 0x1fffffff }, + { 0x0104, 0xffff0318 }, + { 0x0108, 0x387fffe1 }, + { 0x010c, 0x00803f80 }, + { 0x0110, 0x1520009f }, + { 0x0114, 0x00000000 }, + { 0x0118, 0x00000000 }, + }; + + static const u32 pfc_base = 0xe6060000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) { + writel(~pfc_with_unlock[i].val, pfc_base); + writel(pfc_with_unlock[i].val, + pfc_base | pfc_with_unlock[i].off); + } + + for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++) + writel(pfc_without_unlock[i].val, + pfc_base | pfc_without_unlock[i].off); +} + +static void spl_init_gpio(void) +{ + static const u16 gpio_offs[] = { + 0x1000, 0x3000, 0x4000, 0x5000 + }; + + static const struct reg_config gpio_set[] = { + { 0x4000, 0x00c00000 }, + { 0x5000, 0x63020000 }, + }; + + static const struct reg_config gpio_clr[] = { + { 0x1000, 0x00000000 }, + { 0x3000, 0x00000000 }, + { 0x4000, 0x00c00000 }, + { 0x5000, 0xe3020000 }, + }; + + static const u32 gpio_base = 0xe6050000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x20 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x00 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_set); i++) + writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off); + + for (i = 0; i < ARRAY_SIZE(gpio_clr); i++) + writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); +} + +static void spl_init_lbsc(void) +{ + static const struct reg_config lbsc_config[] = { + { 0x00, 0x00000020 }, + { 0x08, 0x00002020 }, + { 0x30, 0x02150326 }, + { 0x38, 0x077f077f }, + }; + + static const u16 lbsc_offs[] = { + 0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8, 0x180 + }; + + static const u32 lbsc_base = 0xfec00200; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) { + writel(lbsc_config[i].val, + lbsc_base | lbsc_config[i].off); + writel(lbsc_config[i].val, + lbsc_base | (lbsc_config[i].off + 4)); + } + + for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++) + writel(0, lbsc_base | lbsc_offs[i]); +} + +static void spl_init_dbsc(void) +{ + static const struct reg_config dbsc_config1[] = { + { 0x0018, 0x21000000 }, + { 0x0018, 0x11000000 }, + { 0x0018, 0x10000000 }, + { 0x0280, 0x0000a55a }, + { 0x0290, 0x00000001 }, + { 0x02a0, 0x80000000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config4[] = { + { 0x0290, 0x00000010 }, + { 0x02a0, 0xf004649b }, + { 0x0290, 0x0000000f }, + { 0x02a0, 0x00181ee4 }, + { 0x0290, 0x00000060 }, + { 0x02a0, 0x330657b2 }, + { 0x0290, 0x00000001 }, + { 0x02a0, 0x00000071 }, + { 0x0020, 0x00000007 }, + { 0x0024, 0x10030a02 }, + { 0x0030, 0x00000001 }, + { 0x00b0, 0x00000000 }, + { 0x0040, 0x0000000b }, + { 0x0044, 0x00000008 }, + { 0x0048, 0x00000000 }, + { 0x0050, 0x0000000b }, + { 0x0054, 0x000c000b }, + { 0x0058, 0x00000027 }, + { 0x005c, 0x0000001c }, + { 0x0060, 0x00000005 }, + { 0x0064, 0x00000018 }, + { 0x0068, 0x00000008 }, + { 0x006c, 0x0000000c }, + { 0x0070, 0x00000009 }, + { 0x0074, 0x00000012 }, + { 0x0078, 0x000000d0 }, + { 0x007c, 0x00140005 }, + { 0x0080, 0x00050004 }, + { 0x0084, 0x70233005 }, + { 0x0088, 0x000c0000 }, + { 0x008c, 0x00000300 }, + { 0x0090, 0x00000040 }, + { 0x0100, 0x00000001 }, + { 0x00c0, 0x00020001 }, + { 0x00c8, 0x20082008 }, + { 0x0380, 0x00020002 }, + { 0x0390, 0x0000000f }, + }; + + static const struct reg_config dbsc_config5[] = { + { 0x0244, 0x00000011 }, + { 0x0290, 0x00000006 }, + { 0x02a0, 0x0005c000 }, + { 0x0290, 0x00000003 }, + { 0x02a0, 0x0300c481 }, + { 0x0290, 0x00000023 }, + { 0x02a0, 0x00fdb6c0 }, + { 0x0290, 0x00000011 }, + { 0x02a0, 0x1000040b }, + { 0x0290, 0x00000012 }, + { 0x02a0, 0x9d5cbb66 }, + { 0x0290, 0x00000013 }, + { 0x02a0, 0x1a868300 }, + { 0x0290, 0x00000014 }, + { 0x02a0, 0x300214d8 }, + { 0x0290, 0x00000015 }, + { 0x02a0, 0x00000d70 }, + { 0x0290, 0x00000016 }, + { 0x02a0, 0x00000006 }, + { 0x0290, 0x00000017 }, + { 0x02a0, 0x00000018 }, + { 0x0290, 0x0000001a }, + { 0x02a0, 0x910035c7 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config6[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x00000181 }, + { 0x0018, 0x11000000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config7[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x0000fe01 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config8[] = { + { 0x0304, 0x00000000 }, + { 0x00f4, 0x01004c20 }, + { 0x00f8, 0x014000aa }, + { 0x00e0, 0x00000140 }, + { 0x00e4, 0x00081860 }, + { 0x00e8, 0x00010000 }, + { 0x0014, 0x00000001 }, + { 0x0010, 0x00000001 }, + { 0x0280, 0x00000000 }, + }; + + static const u32 dbsc3_0_base = DBSC3_0_BASE; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++) + writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++) + writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off); + + dbsc_wait(0x240); + + for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++) + writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++) + writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++) + writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++) + writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off); + +} + +static void spl_init_qspi(void) +{ + mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); + + static const u32 qspi_base = 0xe6b10000; + + writeb(0x08, qspi_base + 0x00); + writeb(0x00, qspi_base + 0x01); + writeb(0x06, qspi_base + 0x02); + writeb(0x01, qspi_base + 0x0a); + writeb(0x00, qspi_base + 0x0b); + writeb(0x00, qspi_base + 0x0c); + writeb(0x00, qspi_base + 0x0d); + writeb(0x00, qspi_base + 0x0e); + + writew(0xe080, qspi_base + 0x10); + + writeb(0xc0, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x08); + writeb(0x48, qspi_base + 0x00); +} + +void board_init_f(ulong dummy) +{ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); + + /* + * SD0 clock is set to 97.5MHz by default. + * Set SD2 to the 97.5MHz as well. + */ + writel(SD_97500KHZ, SD2CKCR); + + spl_init_sys(); + spl_init_pfc(); + spl_init_gpio(); + spl_init_lbsc(); + spl_init_dbsc(); + spl_init_qspi(); +} + +void spl_board_init(void) +{ + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); +} + +void board_boot_order(u32 *spl_boot_list) +{ + const u32 jtag_magic = 0x1337c0de; + const u32 load_magic = 0xb33fc0de; + + /* + * If JTAG probe sets special word at 0xe6300020, then it must + * put U-Boot into RAM and SPL will start it from RAM. + */ + if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { + printf("JTAG boot detected!\n"); + + while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) + ; + + spl_boot_list[0] = BOOT_DEVICE_RAM; + spl_boot_list[1] = BOOT_DEVICE_NONE; + + return; + } + + /* Boot from SPI NOR with YMODEM UART fallback. */ + spl_boot_list[0] = BOOT_DEVICE_SPI; + spl_boot_list[1] = BOOT_DEVICE_UART; + spl_boot_list[2] = BOOT_DEVICE_NONE; +} + +void reset_cpu(ulong addr) +{ +} diff --git a/configs/lager_defconfig b/configs/lager_defconfig index 86fab8c0141..17fc8ae06e6 100644 --- a/configs/lager_defconfig +++ b/configs/lager_defconfig @@ -1,17 +1,37 @@ CONFIG_ARM=y +CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_RMOBILE=y -CONFIG_SYS_TEXT_BASE=0xE8080000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SYS_TEXT_BASE=0x50000000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_R8A7790=y CONFIG_TARGET_LAGER=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="r8a7790-lager-u-boot" +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 +CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y @@ -19,22 +39,43 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_CLK=y +CONFIG_CLK_RENESAS=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_RCAR_IIC=y +CONFIG_DM_MMC=y CONFIG_SH_MMCIF=y +CONFIG_RENESAS_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHY_MICREL=y -CONFIG_NETDEVICES=y +CONFIG_DM_ETH=y CONFIG_SH_ETHER=y -CONFIG_BAUDRATE=38400 +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_PFC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_SCIF_CONSOLE=y CONFIG_SH_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_PCI=y CONFIG_USB_STORAGE=y diff --git a/include/configs/lager.h b/include/configs/lager.h index 97f7b2c7e78..3bd4d51fc30 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -15,14 +15,9 @@ #include "rcar-gen2-common.h" -/* STACK */ -#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT) -#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC -#else -#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC -#endif -#define STACK_AREA_SIZE 0xC000 -#define LOW_LEVEL_MERAM_STACK \ +#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 +#define STACK_AREA_SIZE 0x00100000 +#define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ @@ -32,60 +27,38 @@ /* SCIF */ -/* SPI */ +/* FLASH */ #define CONFIG_SPI /* SH Ether */ #define CONFIG_SH_ETHER_USE_PORT 0 #define CONFIG_SH_ETHER_PHY_ADDR 0x1 #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_RCAR -#define CONFIG_SYS_RCAR_I2C0_SPEED 400000 -#define CONFIG_SYS_RCAR_I2C1_SPEED 400000 -#define CONFIG_SYS_RCAR_I2C2_SPEED 400000 -#define CONFIG_SYS_RCAR_I2C3_SPEED 400000 -#define CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS 4 - -#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ - /* Board Clock */ #define RMOBILE_XTAL_CLK 20000000u #define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK -#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ -#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) -#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2) -#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15) -#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12) +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) #define CONFIG_SYS_TMU_CLK_DIV 4 -/* USB */ -#define CONFIG_USB_EHCI_RMOBILE -#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 - -/* MMC */ -#define CONFIG_SH_MMCIF_ADDR 0xEE220000 -#define CONFIG_SH_MMCIF_CLK 97500000 - -/* Module stop status bits */ -/* INTC-RT */ -#define CONFIG_SMSTP0_ENA 0x00400000 -/* MSIF */ -#define CONFIG_SMSTP2_ENA 0x00002000 -/* INTC-SYS, IRQC */ -#define CONFIG_SMSTP4_ENA 0x00000180 -/* SCIF0 */ -#define CONFIG_SMSTP7_ENA 0x00200000 - -/* SDHI */ -#define CONFIG_SH_SDHI_FREQ 97500000 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" + +/* SPL support */ +#define CONFIG_SPL_TEXT_BASE 0xe6300000 +#define CONFIG_SPL_STACK 0xe6340000 +#define CONFIG_SPL_MAX_SIZE 0x4000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_CONS_SCIF0 +#define CONFIG_SH_SCIF_CLK_FREQ 65000000 +#endif #endif /* __LAGER_H */ -- cgit v1.2.3 From 49aefe300a6f52e49eeb66c9edbc45b688518fdd Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 23 Apr 2018 20:24:10 +0200 Subject: ARM: rmobile: Update M2-N Gose The M2-N Gose port was broken since some time. This patch updates the M2-N Gose port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- arch/arm/dts/r8a7793-gose-u-boot.dts | 4 + arch/arm/mach-rmobile/Kconfig.32 | 3 + board/renesas/gose/Makefile | 8 +- board/renesas/gose/gose.c | 190 +++++----------- board/renesas/gose/gose_spl.c | 408 +++++++++++++++++++++++++++++++++++ configs/gose_defconfig | 49 ++++- include/configs/gose.h | 64 ++---- 7 files changed, 545 insertions(+), 181 deletions(-) create mode 100644 board/renesas/gose/gose_spl.c (limited to 'configs') diff --git a/arch/arm/dts/r8a7793-gose-u-boot.dts b/arch/arm/dts/r8a7793-gose-u-boot.dts index 0c16dde4c73..ed6f391c62c 100644 --- a/arch/arm/dts/r8a7793-gose-u-boot.dts +++ b/arch/arm/dts/r8a7793-gose-u-boot.dts @@ -8,3 +8,7 @@ #include "r8a7793-gose.dts" #include "r8a7793-u-boot.dtsi" + +&scif0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32 index d8c6a8bac92..176f9a62962 100644 --- a/arch/arm/mach-rmobile/Kconfig.32 +++ b/arch/arm/mach-rmobile/Kconfig.32 @@ -42,6 +42,9 @@ config TARGET_GOSE bool "Gose board" select DM select DM_SERIAL + select SUPPORT_SPL + select USE_TINY_PRINTF + select SPL_TINY_MEMSET config TARGET_KOELSCH bool "Koelsch board" diff --git a/board/renesas/gose/Makefile b/board/renesas/gose/Makefile index e09ae1e4143..c6a1dc21cda 100644 --- a/board/renesas/gose/Makefile +++ b/board/renesas/gose/Makefile @@ -1,9 +1,13 @@ # -# board/renesas/alt/Makefile +# board/renesas/gose/Makefile # # Copyright (C) 2014 Renesas Electronics Corporation # # SPDX-License-Identifier: GPL-2.0 # -obj-y := gose.o qos.o ../rcar-common/common.o +ifdef CONFIG_SPL_BUILD +obj-y := gose_spl.o +else +obj-y := gose.o qos.o +endif diff --git a/board/renesas/gose/gose.c b/board/renesas/gose/gose.c index 99d4ba6fd8b..c9209701dd3 100644 --- a/board/renesas/gose/gose.c +++ b/board/renesas/gose/gose.c @@ -46,13 +46,7 @@ void s_init(void) qos_init(); } -#define TMU0_MSTP125 (1 << 25) -#define SCIF0_MSTP721 (1 << 21) -#define ETHER_MSTP813 (1 << 13) - -#define SDHI0_MSTP314 (1 << 14) -#define SDHI1_MSTP312 (1 << 12) -#define SDHI2_MSTP311 (1 << 11) +#define TMU0_MSTP125 BIT(25) #define SD1CKCR 0xE6150078 #define SD2CKCR 0xE615026C @@ -60,143 +54,59 @@ void s_init(void) int board_early_init_f(void) { - /* TMU0 */ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); - /* SCIF0 */ - mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); - - /* ETHER */ - mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); - - /* SDHI */ - mstp_clrbits_le32(MSTPSR3, SMSTPCR3, - SDHI0_MSTP314 | SDHI1_MSTP312 | SDHI2_MSTP311); + /* + * SD0 clock is set to 97.5MHz by default. + * Set SD1 and SD2 to the 97.5MHz as well. + */ writel(SD_97500KHZ, SD1CKCR); writel(SD_97500KHZ, SD2CKCR); return 0; } -#define PUPR5 0xE6060114 -#define PUPR5_ETH 0x3FFC0000 -#define PUPR5_ETH_MAGIC (1 << 27) +#define ETHERNET_PHY_RESET 176 /* GPIO 5 22 */ int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - /* Init PFC controller */ - r8a7793_pinmux_init(); - - /* ETHER Enable */ - gpio_request(GPIO_FN_ETH_CRS_DV, NULL); - gpio_request(GPIO_FN_ETH_RX_ER, NULL); - gpio_request(GPIO_FN_ETH_RXD0, NULL); - gpio_request(GPIO_FN_ETH_RXD1, NULL); - gpio_request(GPIO_FN_ETH_LINK, NULL); - gpio_request(GPIO_FN_ETH_REFCLK, NULL); - gpio_request(GPIO_FN_ETH_MDIO, NULL); - gpio_request(GPIO_FN_ETH_TXD1, NULL); - gpio_request(GPIO_FN_ETH_TX_EN, NULL); - gpio_request(GPIO_FN_ETH_TXD0, NULL); - gpio_request(GPIO_FN_ETH_MDC, NULL); - gpio_request(GPIO_FN_IRQ0, NULL); - - mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH & ~PUPR5_ETH_MAGIC); - gpio_request(GPIO_GP_5_22, NULL); /* PHY_RST */ - mstp_clrbits_le32(PUPR5, PUPR5, PUPR5_ETH_MAGIC); - - gpio_direction_output(GPIO_GP_5_22, 0); - mdelay(20); - gpio_set_value(GPIO_GP_5_22, 1); - udelay(1); + /* Force ethernet PHY out of reset */ + gpio_request(ETHERNET_PHY_RESET, "phy_reset"); + gpio_direction_output(ETHERNET_PHY_RESET, 0); + mdelay(10); + gpio_direction_output(ETHERNET_PHY_RESET, 1); return 0; } -#define CXR24 0xEE7003C0 /* MAC address high register */ -#define CXR25 0xEE7003C8 /* MAC address low register */ - -int board_eth_init(bd_t *bis) +int dram_init(void) { - int ret = -ENODEV; - u32 val; - unsigned char enetaddr[6]; - -#ifdef CONFIG_SH_ETHER - ret = sh_eth_initialize(bis); - if (!eth_env_get_enetaddr("ethaddr", enetaddr)) - return ret; - - /* Set Mac address */ - val = enetaddr[0] << 24 | enetaddr[1] << 16 | - enetaddr[2] << 8 | enetaddr[3]; - writel(val, CXR24); + if (fdtdec_setup_memory_size() != 0) + return -EINVAL; - val = enetaddr[4] << 8 | enetaddr[5]; - writel(val, CXR25); -#endif - - return ret; + return 0; } -int board_mmc_init(bd_t *bis) +int dram_init_banksize(void) { - int ret = -ENODEV; - -#ifdef CONFIG_SH_SDHI - gpio_request(GPIO_FN_SD0_DATA0, NULL); - gpio_request(GPIO_FN_SD0_DATA1, NULL); - gpio_request(GPIO_FN_SD0_DATA2, NULL); - gpio_request(GPIO_FN_SD0_DATA3, NULL); - gpio_request(GPIO_FN_SD0_CLK, NULL); - gpio_request(GPIO_FN_SD0_CMD, NULL); - gpio_request(GPIO_FN_SD0_CD, NULL); - gpio_request(GPIO_FN_SD2_DATA0, NULL); - gpio_request(GPIO_FN_SD2_DATA1, NULL); - gpio_request(GPIO_FN_SD2_DATA2, NULL); - gpio_request(GPIO_FN_SD2_DATA3, NULL); - gpio_request(GPIO_FN_SD2_CLK, NULL); - gpio_request(GPIO_FN_SD2_CMD, NULL); - gpio_request(GPIO_FN_SD2_CD, NULL); - - /* SDHI 0 */ - gpio_request(GPIO_GP_7_17, NULL); - gpio_request(GPIO_GP_2_12, NULL); - gpio_direction_output(GPIO_GP_7_17, 1); /* power on */ - gpio_direction_output(GPIO_GP_2_12, 1); /* 1: 3.3V, 0: 1.8V */ - - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0, - SH_SDHI_QUIRK_16BIT_BUF); - if (ret) - return ret; - - /* SDHI 1 */ - gpio_request(GPIO_GP_7_18, NULL); - gpio_request(GPIO_GP_2_13, NULL); - gpio_direction_output(GPIO_GP_7_18, 1); /* power on */ - gpio_direction_output(GPIO_GP_2_13, 1); /* 1: 3.3V, 0: 1.8V */ - - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0); - if (ret) - return ret; - - /* SDHI 2 */ - gpio_request(GPIO_GP_7_19, NULL); - gpio_request(GPIO_GP_2_26, NULL); - gpio_direction_output(GPIO_GP_7_19, 1); /* power on */ - gpio_direction_output(GPIO_GP_2_26, 1); /* 1: 3.3V, 0: 1.8V */ + fdtdec_setup_memory_banksize(); - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 2, 0); -#endif - return ret; + return 0; } -int dram_init(void) +/* KSZ8041RNLI */ +#define PHY_CONTROL1 0x1E +#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE_ACK 0x4000 +int board_phy_config(struct phy_device *phydev) { - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1); + ret &= ~PHY_LED_MODE; + ret |= PHY_LED_MODE_ACK; + ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret); return 0; } @@ -207,22 +117,38 @@ const struct rmobile_sysinfo sysinfo = { void reset_cpu(ulong addr) { - u8 val; + struct udevice *dev; + const u8 pmic_bus = 6; + const u8 pmic_addr = 0x58; + u8 data; + int ret; + + ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev); + if (ret) + hang(); + + ret = dm_i2c_read(dev, 0x13, &data, 1); + if (ret) + hang(); + + data |= BIT(1); - i2c_set_bus_num(2); /* PowerIC connected to ch2 */ - i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); - val |= 0x02; - i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); + ret = dm_i2c_write(dev, 0x13, &data, 1); + if (ret) + hang(); } -static const struct sh_serial_platdata serial_platdata = { - .base = SCIF0_BASE, - .type = PORT_SCIF, - .clk = 14745600, - .clk_mode = EXT_CLK, -}; +enum env_location env_get_location(enum env_operation op, int prio) +{ + const u32 load_magic = 0xb33fc0de; -U_BOOT_DEVICE(gose_serials) = { - .name = "serial_sh", - .platdata = &serial_platdata, -}; + /* Block environment access if loaded using JTAG */ + if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) && + (op != ENVOP_INIT)) + return ENVL_UNKNOWN; + + if (prio) + return ENVL_UNKNOWN; + + return ENVL_SPI_FLASH; +} diff --git a/board/renesas/gose/gose_spl.c b/board/renesas/gose/gose_spl.c new file mode 100644 index 00000000000..17b9da69d03 --- /dev/null +++ b/board/renesas/gose/gose_spl.c @@ -0,0 +1,408 @@ +/* + * board/renesas/gose/gose_spl.c + * + * Copyright (C) 2018 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define TMU0_MSTP125 BIT(25) +#define SCIF0_MSTP721 BIT(21) +#define QSPI_MSTP917 BIT(17) + +#define SD2CKCR 0xE615026C +#define SD_97500KHZ 0x7 + +struct reg_config { + u16 off; + u32 val; +}; + +static void dbsc_wait(u16 reg) +{ + static const u32 dbsc3_0_base = DBSC3_0_BASE; + + while (!(readl(dbsc3_0_base + reg) & BIT(0))) + ; +} + +static void spl_init_sys(void) +{ + u32 r0 = 0; + + writel(0xa5a5a500, 0xe6020004); + writel(0xa5a5a500, 0xe6030004); + + asm volatile( + /* ICIALLU - Invalidate I$ to PoU */ + "mcr 15, 0, %0, cr7, cr5, 0 \n" + /* BPIALL - Invalidate branch predictors */ + "mcr 15, 0, %0, cr7, cr5, 6 \n" + /* Set SCTLR[IZ] */ + "mrc 15, 0, %0, cr1, cr0, 0 \n" + "orr %0, #0x1800 \n" + "mcr 15, 0, %0, cr1, cr0, 0 \n" + "isb sy \n" + :"=r"(r0)); +} + +static void spl_init_pfc(void) +{ + static const struct reg_config pfc_with_unlock[] = { + { 0x0090, 0x60000000 }, + { 0x0094, 0x60000000 }, + { 0x0098, 0x00800200 }, + { 0x009c, 0x00000000 }, + { 0x0020, 0x00000000 }, + { 0x0024, 0x00000000 }, + { 0x0028, 0x000244c8 }, + { 0x002c, 0x00000000 }, + { 0x0030, 0x00002400 }, + { 0x0034, 0x01520000 }, + { 0x0038, 0x00724003 }, + { 0x003c, 0x00000000 }, + { 0x0040, 0x00000000 }, + { 0x0044, 0x00000000 }, + { 0x0048, 0x00000000 }, + { 0x004c, 0x00000000 }, + { 0x0050, 0x00000000 }, + { 0x0054, 0x00000000 }, + { 0x0058, 0x00000000 }, + { 0x005c, 0x00000000 }, + { 0x0160, 0x00000000 }, + { 0x0004, 0xffffffff }, + { 0x0008, 0x00ec3fff }, + { 0x000c, 0x3bc001e7 }, + { 0x0010, 0x5bffffff }, + { 0x0014, 0x1ffffffb }, + { 0x0018, 0x01bffff0 }, + { 0x001c, 0xcf7fffff }, + { 0x0074, 0x0381fc00 }, + }; + + static const struct reg_config pfc_without_unlock[] = { + { 0x0100, 0xffffffdf }, + { 0x0104, 0xc883c3ff }, + { 0x0108, 0x1201f3c9 }, + { 0x010c, 0x00000000 }, + { 0x0110, 0xffffeb04 }, + { 0x0114, 0xc003ffff }, + { 0x0118, 0x0800000f }, + { 0x011c, 0x001800f0 }, + }; + + static const u32 pfc_base = 0xe6060000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) { + writel(~pfc_with_unlock[i].val, pfc_base); + writel(pfc_with_unlock[i].val, + pfc_base | pfc_with_unlock[i].off); + } + + for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++) + writel(pfc_without_unlock[i].val, + pfc_base | pfc_without_unlock[i].off); +} + +static void spl_init_gpio(void) +{ + static const u16 gpio_offs[] = { + 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x5400, 0x5800 + }; + + static const struct reg_config gpio_set[] = { + { 0x2000, 0x04381000 }, + { 0x5000, 0x00000000 }, + { 0x5800, 0x000e0000 }, + }; + + static const struct reg_config gpio_clr[] = { + { 0x1000, 0x00000000 }, + { 0x2000, 0x04381010 }, + { 0x3000, 0x00000000 }, + { 0x4000, 0x00000000 }, + { 0x5000, 0x00400000 }, + { 0x5400, 0x00000000 }, + { 0x5800, 0x000e0380 }, + }; + + static const u32 gpio_base = 0xe6050000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x20 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x00 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_set); i++) + writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off); + + for (i = 0; i < ARRAY_SIZE(gpio_clr); i++) + writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); +} + +static void spl_init_lbsc(void) +{ + static const struct reg_config lbsc_config[] = { + { 0x00, 0x00000020 }, + { 0x08, 0x00002020 }, + { 0x30, 0x2a103320 }, + { 0x38, 0xff70ff70 }, + }; + + static const u16 lbsc_offs[] = { + 0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8, 0x180 + }; + + static const u32 lbsc_base = 0xfec00200; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) { + writel(lbsc_config[i].val, + lbsc_base | lbsc_config[i].off); + writel(lbsc_config[i].val, + lbsc_base | (lbsc_config[i].off + 4)); + } + + for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++) + writel(0, lbsc_base | lbsc_offs[i]); +} + +static void spl_init_dbsc(void) +{ + static const struct reg_config dbsc_config1[] = { + { 0x0280, 0x0000a55a }, + { 0x0018, 0x21000000 }, + { 0x0018, 0x11000000 }, + { 0x0018, 0x10000000 }, + { 0x0290, 0x00000001 }, + { 0x02a0, 0x80000000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config2[] = { + { 0x0290, 0x00000006 }, + { 0x02a0, 0x0001c000 }, + }; + + static const struct reg_config dbsc_config4[] = { + { 0x0290, 0x00000010 }, + { 0x02a0, 0xf00464db }, + { 0x0290, 0x00000061 }, + { 0x02a0, 0x0000006d }, + { 0x0290, 0x00000001 }, + { 0x02a0, 0x00000073 }, + { 0x0020, 0x00000007 }, + { 0x0024, 0x0f030a02 }, + { 0x0030, 0x00000001 }, + { 0x00b0, 0x00000000 }, + { 0x0040, 0x0000000b }, + { 0x0044, 0x00000008 }, + { 0x0048, 0x00000000 }, + { 0x0050, 0x0000000b }, + { 0x0054, 0x000c000b }, + { 0x0058, 0x00000027 }, + { 0x005c, 0x0000001c }, + { 0x0060, 0x00000006 }, + { 0x0064, 0x00000020 }, + { 0x0068, 0x00000008 }, + { 0x006c, 0x0000000c }, + { 0x0070, 0x00000009 }, + { 0x0074, 0x00000012 }, + { 0x0078, 0x000000d0 }, + { 0x007c, 0x00140005 }, + { 0x0080, 0x00050004 }, + { 0x0084, 0x70233005 }, + { 0x0088, 0x000c0000 }, + { 0x008c, 0x00000200 }, + { 0x0090, 0x00000040 }, + { 0x0100, 0x00000001 }, + { 0x00c0, 0x00020001 }, + { 0x00c8, 0x20042004 }, + { 0x0380, 0x00020002 }, + { 0x0390, 0x0000001f }, + }; + + static const struct reg_config dbsc_config5[] = { + { 0x0244, 0x00000011 }, + { 0x0290, 0x00000003 }, + { 0x02a0, 0x0300c561 }, + { 0x0290, 0x00000023 }, + { 0x02a0, 0x00fcdb60 }, + { 0x0290, 0x00000011 }, + { 0x02a0, 0x1000040b }, + { 0x0290, 0x00000012 }, + { 0x02a0, 0x9d9cbb66 }, + { 0x0290, 0x00000013 }, + { 0x02a0, 0x1a868400 }, + { 0x0290, 0x00000014 }, + { 0x02a0, 0x300214d8 }, + { 0x0290, 0x00000015 }, + { 0x02a0, 0x00000d70 }, + { 0x0290, 0x00000016 }, + { 0x02a0, 0x00000006 }, + { 0x0290, 0x00000017 }, + { 0x02a0, 0x00000018 }, + { 0x0290, 0x0000001a }, + { 0x02a0, 0x910035c7 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config6[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x00000181 }, + { 0x0018, 0x11000000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config7[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x0000fe01 }, + { 0x0304, 0x00000000 }, + { 0x00f4, 0x01004c20 }, + { 0x00f8, 0x014000aa }, + { 0x00e0, 0x00000140 }, + { 0x00e4, 0x00081860 }, + { 0x00e8, 0x00010000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config8[] = { + { 0x0014, 0x00000001 }, + { 0x0010, 0x00000001 }, + { 0x0280, 0x00000000 }, + }; + + static const u32 dbsc3_0_base = DBSC3_0_BASE; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++) + writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config2); i++) + writel(dbsc_config2[i].val, dbsc3_0_base | dbsc_config2[i].off); + + for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++) + writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off); + + dbsc_wait(0x240); + + for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++) + writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++) + writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++) + writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++) + writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off); + +} + +static void spl_init_qspi(void) +{ + mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); + + static const u32 qspi_base = 0xe6b10000; + + writeb(0x08, qspi_base + 0x00); + writeb(0x00, qspi_base + 0x01); + writeb(0x06, qspi_base + 0x02); + writeb(0x01, qspi_base + 0x0a); + writeb(0x00, qspi_base + 0x0b); + writeb(0x00, qspi_base + 0x0c); + writeb(0x00, qspi_base + 0x0d); + writeb(0x00, qspi_base + 0x0e); + + writew(0xe080, qspi_base + 0x10); + + writeb(0xc0, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x08); + writeb(0x48, qspi_base + 0x00); +} + +void board_init_f(ulong dummy) +{ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721); + + /* + * SD0 clock is set to 97.5MHz by default. + * Set SD2 to the 97.5MHz as well. + */ + writel(SD_97500KHZ, SD2CKCR); + + spl_init_sys(); + spl_init_pfc(); + spl_init_gpio(); + spl_init_lbsc(); + spl_init_dbsc(); + spl_init_qspi(); +} + +void spl_board_init(void) +{ + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); +} + +void board_boot_order(u32 *spl_boot_list) +{ + const u32 jtag_magic = 0x1337c0de; + const u32 load_magic = 0xb33fc0de; + + /* + * If JTAG probe sets special word at 0xe6300020, then it must + * put U-Boot into RAM and SPL will start it from RAM. + */ + if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { + printf("JTAG boot detected!\n"); + + while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) + ; + + spl_boot_list[0] = BOOT_DEVICE_RAM; + spl_boot_list[1] = BOOT_DEVICE_NONE; + + return; + } + + /* Boot from SPI NOR with YMODEM UART fallback. */ + spl_boot_list[0] = BOOT_DEVICE_SPI; + spl_boot_list[1] = BOOT_DEVICE_UART; + spl_boot_list[2] = BOOT_DEVICE_NONE; +} + +void reset_cpu(ulong addr) +{ +} diff --git a/configs/gose_defconfig b/configs/gose_defconfig index baa8d85e48f..8edb9a83456 100644 --- a/configs/gose_defconfig +++ b/configs/gose_defconfig @@ -1,17 +1,37 @@ CONFIG_ARM=y +CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_RMOBILE=y -CONFIG_SYS_TEXT_BASE=0xE6304000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SYS_TEXT_BASE=0x50000000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_R8A7793=y CONFIG_TARGET_GOSE=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="r8a7793-gose-u-boot" +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 +CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y @@ -19,21 +39,42 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_CLK=y +CONFIG_CLK_RENESAS=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_RCAR_IIC=y +CONFIG_DM_MMC=y +CONFIG_RENESAS_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHY_MICREL=y -CONFIG_NETDEVICES=y +CONFIG_DM_ETH=y CONFIG_SH_ETHER=y -CONFIG_BAUDRATE=38400 +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_PFC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_SCIF_CONSOLE=y CONFIG_SH_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_PCI=y CONFIG_USB_STORAGE=y diff --git a/include/configs/gose.h b/include/configs/gose.h index 3531621910e..af6189e4c1f 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -14,21 +14,15 @@ #include "rcar-gen2-common.h" -/* STACK */ -#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT) -#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC -#else -#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC -#endif - -#define STACK_AREA_SIZE 0xC000 -#define LOW_LEVEL_MERAM_STACK \ - (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) +#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 +#define STACK_AREA_SIZE 0x00100000 +#define LOW_LEVEL_MERAM_STACK \ + (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) /* MEMORY */ #define RCAR_GEN2_SDRAM_BASE 0x40000000 -#define RCAR_GEN2_SDRAM_SIZE 0x40000000 -#define RCAR_GEN2_UBOOT_SDRAM_SIZE 0x20000000 +#define RCAR_GEN2_SDRAM_SIZE (1048u * 1024 * 1024) +#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512u * 1024 * 1024) /* SCIF */ @@ -41,45 +35,29 @@ #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 /* Board Clock */ #define RMOBILE_XTAL_CLK 20000000u #define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) -#define CONFIG_SYS_TMU_CLK_DIV 4 -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SH -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 -#define CONFIG_SYS_I2C_SH_SPEED0 400000 -#define CONFIG_SYS_I2C_SH_SPEED1 400000 -#define CONFIG_SYS_I2C_SH_SPEED2 400000 -#define CONFIG_SH_I2C_DATA_HIGH 4 -#define CONFIG_SH_I2C_DATA_LOW 5 -#define CONFIG_SH_I2C_CLOCK 10000000 - -#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ - -/* USB */ -#define CONFIG_USB_EHCI_RMOBILE -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* Module stop status bits */ -/* INTC-RT */ -#define CONFIG_SMSTP0_ENA 0x00400000 -/* MSIF */ -#define CONFIG_SMSTP2_ENA 0x00002000 -/* INTC-SYS, IRQC */ -#define CONFIG_SMSTP4_ENA 0x00000180 -/* SCIF0 */ -#define CONFIG_SMSTP7_ENA 0x00200000 +#define CONFIG_SYS_TMU_CLK_DIV 4 -/* SDHI */ -#define CONFIG_SH_SDHI_FREQ 97500000 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" + +/* SPL support */ +#define CONFIG_SPL_TEXT_BASE 0xe6300000 +#define CONFIG_SPL_STACK 0xe6340000 +#define CONFIG_SPL_MAX_SIZE 0x4000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_CONS_SCIF0 +#define CONFIG_SH_SCIF_CLK_FREQ 65000000 +#endif #endif /* __GOSE_H */ -- cgit v1.2.3 From bb6d2ff2ac96a6b3d83f7f65483a2f8087d1f902 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 23 Apr 2018 20:24:16 +0200 Subject: ARM: rmobile: Update E2 Alt The E2 Alt port was broken since some time. This patch updates the E2 Alt port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu --- arch/arm/dts/r8a7794-alt-u-boot.dts | 4 + arch/arm/mach-rmobile/Kconfig.32 | 3 + board/renesas/alt/Makefile | 6 +- board/renesas/alt/alt.c | 209 +++++------------- board/renesas/alt/alt_spl.c | 411 ++++++++++++++++++++++++++++++++++++ configs/alt_defconfig | 49 ++++- include/configs/alt.h | 71 ++----- 7 files changed, 547 insertions(+), 206 deletions(-) create mode 100644 board/renesas/alt/alt_spl.c (limited to 'configs') diff --git a/arch/arm/dts/r8a7794-alt-u-boot.dts b/arch/arm/dts/r8a7794-alt-u-boot.dts index 8a14e46a7ab..e179335d3a4 100644 --- a/arch/arm/dts/r8a7794-alt-u-boot.dts +++ b/arch/arm/dts/r8a7794-alt-u-boot.dts @@ -8,3 +8,7 @@ #include "r8a7794-alt.dts" #include "r8a7794-u-boot.dtsi" + +&scif2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-rmobile/Kconfig.32 b/arch/arm/mach-rmobile/Kconfig.32 index 176f9a62962..84c1a6d07bd 100644 --- a/arch/arm/mach-rmobile/Kconfig.32 +++ b/arch/arm/mach-rmobile/Kconfig.32 @@ -69,6 +69,9 @@ config TARGET_ALT bool "Alt board" select DM select DM_SERIAL + select SUPPORT_SPL + select USE_TINY_PRINTF + select SPL_TINY_MEMSET config TARGET_SILK bool "Silk board" diff --git a/board/renesas/alt/Makefile b/board/renesas/alt/Makefile index 22ab1f43d96..53418699b27 100644 --- a/board/renesas/alt/Makefile +++ b/board/renesas/alt/Makefile @@ -6,4 +6,8 @@ # SPDX-License-Identifier: GPL-2.0 # -obj-y := alt.o qos.o ../rcar-common/common.o +ifdef CONFIG_SPL_BUILD +obj-y := alt_spl.o +else +obj-y := alt.o qos.o +endif diff --git a/board/renesas/alt/alt.c b/board/renesas/alt/alt.c index f2200ef0810..7598b1a4b92 100644 --- a/board/renesas/alt/alt.c +++ b/board/renesas/alt/alt.c @@ -43,176 +43,65 @@ void s_init(void) qos_init(); } -#define TMU0_MSTP125 (1 << 25) -#define SCIF2_MSTP719 (1 << 19) -#define ETHER_MSTP813 (1 << 13) -#define IIC1_MSTP323 (1 << 23) -#define MMC0_MSTP315 (1 << 15) -#define SDHI0_MSTP314 (1 << 14) -#define SDHI1_MSTP312 (1 << 12) +#define TMU0_MSTP125 BIT(25) +#define MMC0_MSTP315 BIT(15) #define SD1CKCR 0xE6150078 -#define SD1_97500KHZ 0x7 +#define SD_97500KHZ 0x7 int board_early_init_f(void) { /* TMU */ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); - /* SCIF2 */ - mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719); + /* Set SD1 to the 97.5MHz */ + writel(SD_97500KHZ, SD1CKCR); - /* ETHER */ - mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); - - /* IIC1 / sh-i2c ch1 */ - mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323); - -#ifdef CONFIG_SH_MMCIF - /* MMC */ - mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315); -#endif - -#ifdef CONFIG_SH_SDHI - /* SDHI0, 1 */ - mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI0_MSTP314 | SDHI1_MSTP312); - - /* - * SD0 clock is set to 97.5MHz by default. - * Set SD1 to the 97.5MHz as well. - */ - writel(SD1_97500KHZ, SD1CKCR); -#endif return 0; } +#define ETHERNET_PHY_RESET 56 /* GPIO 1 24 */ + int board_init(void) { /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - /* Init PFC controller */ - r8a7794_pinmux_init(); - - /* Ether Enable */ -#if defined(CONFIG_R8A7794_ETHERNET_B) - gpio_request(GPIO_FN_ETH_CRS_DV_B, NULL); - gpio_request(GPIO_FN_ETH_RX_ER_B, NULL); - gpio_request(GPIO_FN_ETH_RXD0_B, NULL); - gpio_request(GPIO_FN_ETH_RXD1_B, NULL); - gpio_request(GPIO_FN_ETH_LINK_B, NULL); - gpio_request(GPIO_FN_ETH_REFCLK_B, NULL); - gpio_request(GPIO_FN_ETH_MDIO_B, NULL); - gpio_request(GPIO_FN_ETH_TXD1_B, NULL); - gpio_request(GPIO_FN_ETH_TX_EN_B, NULL); - gpio_request(GPIO_FN_ETH_MAGIC_B, NULL); - gpio_request(GPIO_FN_ETH_TXD0_B, NULL); - gpio_request(GPIO_FN_ETH_MDC_B, NULL); -#else - gpio_request(GPIO_FN_ETH_CRS_DV, NULL); - gpio_request(GPIO_FN_ETH_RX_ER, NULL); - gpio_request(GPIO_FN_ETH_RXD0, NULL); - gpio_request(GPIO_FN_ETH_RXD1, NULL); - gpio_request(GPIO_FN_ETH_LINK, NULL); - gpio_request(GPIO_FN_ETH_REFCLK, NULL); - gpio_request(GPIO_FN_ETH_MDIO, NULL); - gpio_request(GPIO_FN_ETH_TXD1, NULL); - gpio_request(GPIO_FN_ETH_TX_EN, NULL); - gpio_request(GPIO_FN_ETH_MAGIC, NULL); - gpio_request(GPIO_FN_ETH_TXD0, NULL); - gpio_request(GPIO_FN_ETH_MDC, NULL); -#endif - gpio_request(GPIO_FN_IRQ8, NULL); - - /* PHY reset */ - gpio_request(GPIO_GP_1_24, NULL); - gpio_direction_output(GPIO_GP_1_24, 0); + /* Force ethernet PHY out of reset */ + gpio_request(ETHERNET_PHY_RESET, "phy_reset"); + gpio_direction_output(ETHERNET_PHY_RESET, 0); mdelay(20); - gpio_set_value(GPIO_GP_1_24, 1); + gpio_direction_output(ETHERNET_PHY_RESET, 1); udelay(1); return 0; } -#define CXR24 0xEE7003C0 /* MAC address high register */ -#define CXR25 0xEE7003C8 /* MAC address low register */ -int board_eth_init(bd_t *bis) +int dram_init(void) { -#ifdef CONFIG_SH_ETHER - int ret = -ENODEV; - u32 val; - unsigned char enetaddr[6]; - - ret = sh_eth_initialize(bis); - if (!eth_env_get_enetaddr("ethaddr", enetaddr)) - return ret; + if (fdtdec_setup_memory_size() != 0) + return -EINVAL; - /* Set Mac address */ - val = enetaddr[0] << 24 | enetaddr[1] << 16 | - enetaddr[2] << 8 | enetaddr[3]; - writel(val, CXR24); - - val = enetaddr[4] << 8 | enetaddr[5]; - writel(val, CXR25); - - return ret; -#else return 0; -#endif } -int board_mmc_init(bd_t *bis) +int dram_init_banksize(void) { - int ret = -ENODEV; - -#ifdef CONFIG_SH_MMCIF - gpio_request(GPIO_GP_4_31, NULL); - gpio_set_value(GPIO_GP_4_31, 1); - - ret = mmcif_mmc_init(); -#endif - -#ifdef CONFIG_SH_SDHI - gpio_request(GPIO_FN_SD0_DATA0, NULL); - gpio_request(GPIO_FN_SD0_DATA1, NULL); - gpio_request(GPIO_FN_SD0_DATA2, NULL); - gpio_request(GPIO_FN_SD0_DATA3, NULL); - gpio_request(GPIO_FN_SD0_CLK, NULL); - gpio_request(GPIO_FN_SD0_CMD, NULL); - gpio_request(GPIO_FN_SD0_CD, NULL); - gpio_request(GPIO_FN_SD1_DATA0, NULL); - gpio_request(GPIO_FN_SD1_DATA1, NULL); - gpio_request(GPIO_FN_SD1_DATA2, NULL); - gpio_request(GPIO_FN_SD1_DATA3, NULL); - gpio_request(GPIO_FN_SD1_CLK, NULL); - gpio_request(GPIO_FN_SD1_CMD, NULL); - gpio_request(GPIO_FN_SD1_CD, NULL); - - /* SDHI 0 */ - gpio_request(GPIO_GP_2_26, NULL); - gpio_request(GPIO_GP_2_29, NULL); - gpio_direction_output(GPIO_GP_2_26, 1); - gpio_direction_output(GPIO_GP_2_29, 1); - - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0, - SH_SDHI_QUIRK_16BIT_BUF); - if (ret) - return ret; + fdtdec_setup_memory_banksize(); - /* SDHI 1 */ - gpio_request(GPIO_GP_4_26, NULL); - gpio_request(GPIO_GP_4_29, NULL); - gpio_direction_output(GPIO_GP_4_26, 1); - gpio_direction_output(GPIO_GP_4_29, 1); - - ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0); -#endif - return ret; + return 0; } -int dram_init(void) +/* KSZ8041RNLI */ +#define PHY_CONTROL1 0x1E +#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE_ACK 0x4000 +int board_phy_config(struct phy_device *phydev) { - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + int ret = phy_read(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1); + ret &= ~PHY_LED_MODE; + ret |= PHY_LED_MODE_ACK; + ret = phy_write(phydev, MDIO_DEVAD_NONE, PHY_CONTROL1, (u16)ret); return 0; } @@ -223,22 +112,38 @@ const struct rmobile_sysinfo sysinfo = { void reset_cpu(ulong addr) { - u8 val; + struct udevice *dev; + const u8 pmic_bus = 1; + const u8 pmic_addr = 0x58; + u8 data; + int ret; - i2c_set_bus_num(1); /* PowerIC connected to ch1 */ - i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); - val |= 0x02; - i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1); + ret = i2c_get_chip_for_busnum(pmic_bus, pmic_addr, 1, &dev); + if (ret) + hang(); + + ret = dm_i2c_read(dev, 0x13, &data, 1); + if (ret) + hang(); + + data |= BIT(1); + + ret = dm_i2c_write(dev, 0x13, &data, 1); + if (ret) + hang(); } -static const struct sh_serial_platdata serial_platdata = { - .base = SCIF2_BASE, - .type = PORT_SCIF, - .clk = 14745600, - .clk_mode = EXT_CLK, -}; +enum env_location env_get_location(enum env_operation op, int prio) +{ + const u32 load_magic = 0xb33fc0de; -U_BOOT_DEVICE(alt_serials) = { - .name = "serial_sh", - .platdata = &serial_platdata, -}; + /* Block environment access if loaded using JTAG */ + if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) && + (op != ENVOP_INIT)) + return ENVL_UNKNOWN; + + if (prio) + return ENVL_UNKNOWN; + + return ENVL_SPI_FLASH; +} diff --git a/board/renesas/alt/alt_spl.c b/board/renesas/alt/alt_spl.c new file mode 100644 index 00000000000..f893a49257d --- /dev/null +++ b/board/renesas/alt/alt_spl.c @@ -0,0 +1,411 @@ +/* + * board/renesas/alt/alt_spl.c + * + * Copyright (C) 2018 Marek Vasut + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define TMU0_MSTP125 BIT(25) +#define SCIF2_MSTP719 BIT(19) +#define QSPI_MSTP917 BIT(17) + +#define SD1CKCR 0xE6150078 +#define SD_97500KHZ 0x7 + +struct reg_config { + u16 off; + u32 val; +}; + +static void dbsc_wait(u16 reg) +{ + static const u32 dbsc3_0_base = DBSC3_0_BASE; + + while (!(readl(dbsc3_0_base + reg) & BIT(0))) + ; +} + +static void spl_init_sys(void) +{ + u32 r0 = 0; + + writel(0xa5a5a500, 0xe6020004); + writel(0xa5a5a500, 0xe6030004); + + asm volatile( + /* ICIALLU - Invalidate I$ to PoU */ + "mcr 15, 0, %0, cr7, cr5, 0 \n" + /* BPIALL - Invalidate branch predictors */ + "mcr 15, 0, %0, cr7, cr5, 6 \n" + /* Set SCTLR[IZ] */ + "mrc 15, 0, %0, cr1, cr0, 0 \n" + "orr %0, #0x1800 \n" + "mcr 15, 0, %0, cr1, cr0, 0 \n" + "isb sy \n" + :"=r"(r0)); +} + +static void spl_init_pfc(void) +{ + static const struct reg_config pfc_with_unlock[] = { + { 0x0090, 0x00000000 }, + { 0x0094, 0x00000000 }, + { 0x0098, 0x00000000 }, + { 0x0020, 0x00000000 }, + { 0x0024, 0x00000000 }, + { 0x0028, 0x40000000 }, + { 0x002c, 0x00000155 }, + { 0x0030, 0x00000002 }, + { 0x0034, 0x00000000 }, + { 0x0038, 0x00000000 }, + { 0x003c, 0x00000000 }, + { 0x0040, 0x60000000 }, + { 0x0044, 0x36dab6db }, + { 0x0048, 0x926da012 }, + { 0x004c, 0x0008c383 }, + { 0x0050, 0x00000000 }, + { 0x0054, 0x00000140 }, + { 0x0004, 0xffffffff }, + { 0x0008, 0x00ec3fff }, + { 0x000c, 0x5bffffff }, + { 0x0010, 0x01bfe1ff }, + { 0x0014, 0x5bffffff }, + { 0x0018, 0x0f4b200f }, + { 0x001c, 0x03ffffff }, + }; + + static const struct reg_config pfc_without_unlock[] = { + { 0x0100, 0x00000000 }, + { 0x0104, 0x4203fc00 }, + { 0x0108, 0x00000000 }, + { 0x010c, 0x159007ff }, + { 0x0110, 0x80000000 }, + { 0x0114, 0x00de481f }, + { 0x0118, 0x00000000 }, + }; + + static const struct reg_config pfc_with_unlock2[] = { + { 0x0060, 0xffffffff }, + { 0x0064, 0xfffff000 }, + { 0x0068, 0x55555500 }, + { 0x006c, 0xffffff00 }, + { 0x0070, 0x00000000 }, + }; + + static const u32 pfc_base = 0xe6060000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(pfc_with_unlock); i++) { + writel(~pfc_with_unlock[i].val, pfc_base); + writel(pfc_with_unlock[i].val, + pfc_base | pfc_with_unlock[i].off); + } + + for (i = 0; i < ARRAY_SIZE(pfc_without_unlock); i++) + writel(pfc_without_unlock[i].val, + pfc_base | pfc_without_unlock[i].off); + + for (i = 0; i < ARRAY_SIZE(pfc_with_unlock2); i++) { + writel(~pfc_with_unlock2[i].val, pfc_base); + writel(pfc_with_unlock2[i].val, + pfc_base | pfc_with_unlock2[i].off); + } +} + +static void spl_init_gpio(void) +{ + static const u16 gpio_offs[] = { + 0x1000, 0x2000, 0x3000, 0x4000, 0x5000 + }; + + static const struct reg_config gpio_set[] = { + { 0x2000, 0x24000000 }, + { 0x4000, 0xa4000000 }, + { 0x5000, 0x0004c000 }, + }; + + static const struct reg_config gpio_clr[] = { + { 0x1000, 0x01000000 }, + { 0x2000, 0x24000000 }, + { 0x3000, 0x00000000 }, + { 0x4000, 0xa4000000 }, + { 0x5000, 0x0084c380 }, + }; + + static const u32 gpio_base = 0xe6050000; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x20 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_offs); i++) + writel(0, gpio_base | 0x00 | gpio_offs[i]); + + for (i = 0; i < ARRAY_SIZE(gpio_set); i++) + writel(gpio_set[i].val, gpio_base | 0x08 | gpio_set[i].off); + + for (i = 0; i < ARRAY_SIZE(gpio_clr); i++) + writel(gpio_clr[i].val, gpio_base | 0x04 | gpio_clr[i].off); +} + +static void spl_init_lbsc(void) +{ + static const struct reg_config lbsc_config[] = { + { 0x00, 0x00000020 }, + { 0x08, 0x00002020 }, + { 0x30, 0x2a103320 }, + { 0x38, 0xff70ff70 }, + }; + + static const u16 lbsc_offs[] = { + 0x80, 0x84, 0x88, 0x8c, 0xa0, 0xc0, 0xc4, 0xc8 + }; + + static const u32 lbsc_base = 0xfec00200; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(lbsc_config); i++) { + writel(lbsc_config[i].val, + lbsc_base | lbsc_config[i].off); + writel(lbsc_config[i].val, + lbsc_base | (lbsc_config[i].off + 4)); + } + + for (i = 0; i < ARRAY_SIZE(lbsc_offs); i++) + writel(0, lbsc_base | lbsc_offs[i]); +} + +static void spl_init_dbsc(void) +{ + static const struct reg_config dbsc_config1[] = { + { 0x0018, 0x21000000 }, + { 0x0018, 0x11000000 }, + { 0x0018, 0x10000000 }, + { 0x0280, 0x0000a55a }, + { 0x0290, 0x00000001 }, + { 0x02a0, 0x80000000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config2[] = { + { 0x0290, 0x00000006 }, + { 0x02a0, 0x0005c000 }, + }; + + static const struct reg_config dbsc_config4[] = { + { 0x0290, 0x00000010 }, + { 0x02a0, 0xf00464db }, + { 0x0290, 0x00000061 }, + { 0x02a0, 0x0000006d }, + { 0x0290, 0x00000001 }, + { 0x02a0, 0x00000073 }, + { 0x0020, 0x00000007 }, + { 0x0024, 0x0f030a02 }, + { 0x0030, 0x00000001 }, + { 0x00b0, 0x00000000 }, + { 0x0040, 0x00000009 }, + { 0x0044, 0x00000007 }, + { 0x0048, 0x00000000 }, + { 0x0050, 0x00000009 }, + { 0x0054, 0x000a0009 }, + { 0x0058, 0x00000021 }, + { 0x005c, 0x00000018 }, + { 0x0060, 0x00000005 }, + { 0x0064, 0x0000001b }, + { 0x0068, 0x00000007 }, + { 0x006c, 0x0000000a }, + { 0x0070, 0x00000009 }, + { 0x0074, 0x00000010 }, + { 0x0078, 0x000000ae }, + { 0x007c, 0x00140005 }, + { 0x0080, 0x00050004 }, + { 0x0084, 0x50213005 }, + { 0x0088, 0x000c0000 }, + { 0x008c, 0x00000200 }, + { 0x0090, 0x00000040 }, + { 0x0100, 0x00000001 }, + { 0x00c0, 0x00020001 }, + { 0x00c8, 0x20082008 }, + { 0x0380, 0x00020003 }, + { 0x0390, 0x0000001f }, + }; + + static const struct reg_config dbsc_config5[] = { + { 0x0244, 0x00000011 }, + { 0x0290, 0x00000003 }, + { 0x02a0, 0x0300c4e1 }, + { 0x0290, 0x00000023 }, + { 0x02a0, 0x00fcb6d0 }, + { 0x0290, 0x00000011 }, + { 0x02a0, 0x1000040b }, + { 0x0290, 0x00000012 }, + { 0x02a0, 0x85589955 }, + { 0x0290, 0x00000013 }, + { 0x02a0, 0x1a852400 }, + { 0x0290, 0x00000014 }, + { 0x02a0, 0x300210b4 }, + { 0x0290, 0x00000015 }, + { 0x02a0, 0x00000b50 }, + { 0x0290, 0x00000016 }, + { 0x02a0, 0x00000006 }, + { 0x0290, 0x00000017 }, + { 0x02a0, 0x00000010 }, + { 0x0290, 0x0000001a }, + { 0x02a0, 0x910035c7 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config6[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x00000181 }, + { 0x0018, 0x11000000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config7[] = { + { 0x0290, 0x00000001 }, + { 0x02a0, 0x0000fe01 }, + { 0x0304, 0x00000000 }, + { 0x00f4, 0x01004c20 }, + { 0x00f8, 0x014000aa }, + { 0x00e0, 0x00000140 }, + { 0x00e4, 0x00081450 }, + { 0x00e8, 0x00010000 }, + { 0x0290, 0x00000004 }, + }; + + static const struct reg_config dbsc_config8[] = { + { 0x0014, 0x00000001 }, + { 0x0010, 0x00000001 }, + { 0x0280, 0x00000000 }, + }; + + static const u32 dbsc3_0_base = DBSC3_0_BASE; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(dbsc_config1); i++) + writel(dbsc_config1[i].val, dbsc3_0_base | dbsc_config1[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config2); i++) + writel(dbsc_config2[i].val, dbsc3_0_base | dbsc_config2[i].off); + + for (i = 0; i < ARRAY_SIZE(dbsc_config4); i++) + writel(dbsc_config4[i].val, dbsc3_0_base | dbsc_config4[i].off); + + dbsc_wait(0x240); + + for (i = 0; i < ARRAY_SIZE(dbsc_config5); i++) + writel(dbsc_config5[i].val, dbsc3_0_base | dbsc_config5[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config6); i++) + writel(dbsc_config6[i].val, dbsc3_0_base | dbsc_config6[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config7); i++) + writel(dbsc_config7[i].val, dbsc3_0_base | dbsc_config7[i].off); + + dbsc_wait(0x2a0); + + for (i = 0; i < ARRAY_SIZE(dbsc_config8); i++) + writel(dbsc_config8[i].val, dbsc3_0_base | dbsc_config8[i].off); + +} + +static void spl_init_qspi(void) +{ + mstp_clrbits_le32(MSTPSR9, SMSTPCR9, QSPI_MSTP917); + + static const u32 qspi_base = 0xe6b10000; + + writeb(0x08, qspi_base + 0x00); + writeb(0x00, qspi_base + 0x01); + writeb(0x06, qspi_base + 0x02); + writeb(0x01, qspi_base + 0x0a); + writeb(0x00, qspi_base + 0x0b); + writeb(0x00, qspi_base + 0x0c); + writeb(0x00, qspi_base + 0x0d); + writeb(0x00, qspi_base + 0x0e); + + writew(0xe080, qspi_base + 0x10); + + writeb(0xc0, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x18); + writeb(0x00, qspi_base + 0x08); + writeb(0x48, qspi_base + 0x00); +} + +void board_init_f(ulong dummy) +{ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719); + + /* Set SD1 to the 97.5MHz */ + writel(SD_97500KHZ, SD1CKCR); + + spl_init_sys(); + spl_init_pfc(); + spl_init_gpio(); + spl_init_lbsc(); + spl_init_dbsc(); + spl_init_qspi(); +} + +void spl_board_init(void) +{ + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); +} + +void board_boot_order(u32 *spl_boot_list) +{ + const u32 jtag_magic = 0x1337c0de; + const u32 load_magic = 0xb33fc0de; + + /* + * If JTAG probe sets special word at 0xe6300020, then it must + * put U-Boot into RAM and SPL will start it from RAM. + */ + if (readl(CONFIG_SPL_TEXT_BASE + 0x20) == jtag_magic) { + printf("JTAG boot detected!\n"); + + while (readl(CONFIG_SPL_TEXT_BASE + 0x24) != load_magic) + ; + + spl_boot_list[0] = BOOT_DEVICE_RAM; + spl_boot_list[1] = BOOT_DEVICE_NONE; + + return; + } + + /* Boot from SPI NOR with YMODEM UART fallback. */ + spl_boot_list[0] = BOOT_DEVICE_SPI; + spl_boot_list[1] = BOOT_DEVICE_UART; + spl_boot_list[2] = BOOT_DEVICE_NONE; +} + +void reset_cpu(ulong addr) +{ +} diff --git a/configs/alt_defconfig b/configs/alt_defconfig index 19ae070895b..9867a5f4d5c 100644 --- a/configs/alt_defconfig +++ b/configs/alt_defconfig @@ -1,17 +1,37 @@ CONFIG_ARM=y +CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y +# CONFIG_SPL_USE_ARCH_MEMCPY is not set +# CONFIG_SPL_USE_ARCH_MEMSET is not set CONFIG_ARCH_RMOBILE=y -CONFIG_SYS_TEXT_BASE=0xE6304000 -CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SYS_TEXT_BASE=0x50000000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_R8A7794=y CONFIG_TARGET_ALT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="r8a7794-alt-u-boot" +CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000 +CONFIG_FIT=y CONFIG_BOOTDELAY=3 CONFIG_VERSION_VARIABLE=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_IMI is not set # CONFIG_CMD_XIMG is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y CONFIG_CMD_SDRAM=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y @@ -19,22 +39,43 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_CLK=y +CONFIG_CLK_RENESAS=y +CONFIG_DM_GPIO=y +CONFIG_RCAR_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_RCAR_IIC=y +CONFIG_DM_MMC=y CONFIG_SH_MMCIF=y +CONFIG_RENESAS_SDHI=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHY_MICREL=y -CONFIG_NETDEVICES=y +CONFIG_DM_ETH=y CONFIG_SH_ETHER=y -CONFIG_BAUDRATE=38400 +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_PFC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_SCIF_CONSOLE=y CONFIG_SH_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_PCI=y CONFIG_USB_STORAGE=y diff --git a/include/configs/alt.h b/include/configs/alt.h index d6236870b9d..619660b2bd8 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -15,12 +15,8 @@ #include "rcar-gen2-common.h" -#if defined(CONFIG_ARCH_RMOBILE_EXTRAM_BOOT) -#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC -#else -#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC -#endif -#define STACK_AREA_SIZE 0xC000 +#define CONFIG_SYS_INIT_SP_ADDR 0x4f000000 +#define STACK_AREA_SIZE 0x00100000 #define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) @@ -41,52 +37,29 @@ #define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII #define CONFIG_SH_ETHER_CACHE_WRITEBACK #define CONFIG_SH_ETHER_CACHE_INVALIDATE -#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 +#define CONFIG_SH_ETHER_ALIGNE_SIZE 64 #define CONFIG_BITBANGMII #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK -#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */ -#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2) -#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24) - -#define CONFIG_SYS_TMU_CLK_DIV 4 - -/* i2c */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SH -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3 -#define CONFIG_SYS_I2C_SH_SPEED0 400000 -#define CONFIG_SYS_I2C_SH_SPEED1 400000 -#define CONFIG_SYS_I2C_SH_SPEED2 400000 -#define CONFIG_SH_I2C_DATA_HIGH 4 -#define CONFIG_SH_I2C_DATA_LOW 5 -#define CONFIG_SH_I2C_CLOCK 10000000 - -#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ - -/* USB */ -#define CONFIG_USB_EHCI_RMOBILE -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* MMCIF */ -#define CONFIG_SH_MMCIF_ADDR 0xee200000 -#define CONFIG_SH_MMCIF_CLK 48000000 - -/* Module stop status bits */ -/* INTC-RT */ -#define CONFIG_SMSTP0_ENA 0x00400000 -/* MSIF */ -#define CONFIG_SMSTP2_ENA 0x00002000 -/* INTC-SYS, IRQC */ -#define CONFIG_SMSTP4_ENA 0x00000180 -/* SCIF2 */ -#define CONFIG_SMSTP7_ENA 0x00080000 - -/* SDHI */ -#define CONFIG_SH_SDHI_FREQ 97500000 +#define RMOBILE_XTAL_CLK 20000000u +#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK +#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) + +#define CONFIG_SYS_TMU_CLK_DIV 4 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" + +/* SPL support */ +#define CONFIG_SPL_TEXT_BASE 0xe6300000 +#define CONFIG_SPL_STACK 0xe6340000 +#define CONFIG_SPL_MAX_SIZE 0x4000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x140000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_CONS_SCIF2 +#define CONFIG_SH_SCIF_CLK_FREQ 65000000 +#endif #endif /* __ALT_H */ -- cgit v1.2.3