From 10c7382bc5d5e64c47f94ac2ca78cc574442e82d Mon Sep 17 00:00:00 2001
From: Marcel Ziswiler
Date: Sun, 30 Dec 2007 03:30:56 +0100
Subject: fix various comments

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
 cpu/pxa/start.S | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

(limited to 'cpu/pxa')

diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index b922485ed33..31f408dfa72 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -57,7 +57,7 @@ _fiq:			.word fiq
  * Startup Code (reset vector)
  *
  * do important init only if we don't start from RAM!
- * - relocate armboot to ram
+ * - relocate armboot to RAM
  * - setup stack
  * - jump to second stage
  */
@@ -90,7 +90,7 @@ IRQ_STACK_START:
 .globl FIQ_STACK_START
 FIQ_STACK_START:
 	.word 0x0badc0de
-#endif
+#endif /* CONFIG_USE_IRQ */
 
 
 /****************************************************************************/
@@ -100,18 +100,18 @@ FIQ_STACK_START:
 /****************************************************************************/
 
 reset:
-	mrs	r0,cpsr			/* set the cpu to SVC32 mode	    */
+	mrs	r0,cpsr			/* set the CPU to SVC32 mode	    */
 	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
 	orr	r0,r0,#0x13
 	msr	cpsr,r0
 
 	/*
 	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
+	 * not when booting from RAM!
 	 */
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	bl	cpu_init_crit		/* we do sys-critical inits	    */
-#endif
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
 
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
 relocate:				/* relocate U-Boot to RAM	    */
@@ -130,7 +130,7 @@ copy_loop:
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
+#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
 stack_setup:
@@ -139,7 +139,7 @@ stack_setup:
 	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
+#endif /* CONFIG_USE_IRQ */
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
 
 clear_bss:
@@ -172,11 +172,11 @@ _start_armboot: .word start_armboot
 #undef OSCR
 #undef OWER
 #undef OIER
-#endif
+#endif /* CONFIG_PXA250 || CONFIG_CPU_MONAHANS */
 #ifdef CONFIG_PXA250
 #undef RCSR
 #undef CCCR
-#endif
+#endif /* CONFIG_PXA250 */
 
 /* Interrupt-Controller base address					    */
 IC_BASE:	   .word	   0x40d00000
@@ -197,18 +197,18 @@ OSTIMER_BASE:	.word	0x40a00000
 #ifdef CONFIG_CPU_MONAHANS
 # ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
 #  error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif
+# endif /* !CFG_MONAHANS_RUN_MODE_OSC_RATIO */
 # ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
 #  define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif
-#else /* ! CONFIG_CPU_MONAHANS */
+# endif /* !CFG_MONAHANS_TURBO_RUN_MODE_RATIO */
+#else /* !CONFIG_CPU_MONAHANS */
 #ifdef CFG_CPUSPEED
 CC_BASE:	.word	0x41300000
 #define CCCR	0x00
 cpuspeed:	.word	CFG_CPUSPEED
-#else
+#else /* !CFG_CPUSPEED */
 #error "You have to define CFG_CPUSPEED!!"
-#endif
+#endif /* CFG_CPUSPEED */
 #endif /* CONFIG_CPU_MONAHANS */
 
 	/* takes care the CP15 update has taken place */
@@ -225,7 +225,7 @@ cpu_init_crit:
 	ldr	r0, IC_BASE
 	mov	r1, #0x00
 	str	r1, [r0, #ICMR]
-#else
+#else /* CONFIG_CPU_MONAHANS */
 	/* Step 1 - Enable CP6 permission */
 	mrc	p15, 0, r1, c15, c1, 0	@ read CPAR
 	orr	r1, r1, #0x40
@@ -244,14 +244,14 @@ cpu_init_crit:
 	ldr	r1, =CKENB
 	ldr	r2, =(CKENB_6_IRQ)
 	str	r2, [r1]
-#endif
+#endif /* !CONFIG_CPU_MONAHANS */
 
 	/* set clock speed */
 #ifdef CONFIG_CPU_MONAHANS
 	ldr	r0, =ACCR
 	ldr	r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
 	str	r1, [r0]
-#else /* ! CONFIG_CPU_MONAHANS */
+#else /* !CONFIG_CPU_MONAHANS */
 #ifdef CFG_CPUSPEED
 	ldr	r0, CC_BASE
 	ldr	r1, cpuspeed
@@ -451,7 +451,7 @@ fiq:
 	bl	do_fiq			/* effiction fiq_save_user_regs	    */
 	irq_restore_user_regs
 
-#else
+#else /* !CONFIG_USE_IRQ */
 
 	.align	5
 irq:
@@ -465,7 +465,7 @@ fiq:
 	bad_save_user_regs
 	bl	do_fiq
 
-#endif
+#endif /* CONFIG_USE_IRQ */
 
 /****************************************************************************/
 /*									    */
-- 
cgit v1.2.3