From 7b8a96e57e1db60f742184822a7d8dc508605f1f Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Thu, 17 Mar 2022 12:03:41 -0500 Subject: dt-bindings: memory-controller: Add information about ECC bindings Add DT binding documentation for enabling ECC in the DDR sub system present on AM64 device. Signed-off-by: Dave Gerlach --- doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'doc') diff --git a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt index dd0260b3940..df3290a6b9d 100644 --- a/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt +++ b/doc/device-tree-bindings/memory-controller/k3-j721e-ddrss.txt @@ -13,6 +13,7 @@ Required properties: "ti,am64-ddrss" for am642 - reg-names cfg - Map the controller configuration region ctrl_mmr_lp4 - Map LP4 register region in ctrl mmr + ss - Map the DDRSS configuration region - reg: Contains the register map per reg-names. - power-domains: Should contain two entries: - an entry to TISCI DDR CFG device @@ -32,6 +33,13 @@ Required properties: - ti,pi-data: An array containing the phy independent block settings - ti,phy-data: An array containing the ddr phy settings. +Optional properties: +-------------------- +- reg-names ss - Map the DDRSS configuration region +- reg: Must add "ss" to list if the above ss region is included. +- ti,ecc-enable: Boolean flag to enable ECC. This will reduce available DDR + by 1/9. + Example (J721E): ================ -- cgit v1.2.3