From 107c3391b95bcc2ba09a876da4fa0c31b6c1e460 Mon Sep 17 00:00:00 2001 From: Pali Rohár Date: Tue, 2 Mar 2021 11:17:41 +0100 Subject: ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repository This syncs drivers/ddr/marvell/a38x/ with the master branch of repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git up to the commit 7c351731d196 ("Merge pull request #29 from pali/sync-a38x-uboot"). This patch was created by following steps: 1. Replace all a38x files in U-Boot tree by files from upstream github Marvell mv-ddr-marvell repository. 2. Run following command to omit portions not relevant for a38x and ddr3: files=drivers/ddr/marvell/a38x/* sed 's/#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)/#ifdef TRUE/' -i $files unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 -UCONFIG_APN806 \ -UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \ -UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DTRUE $files 3. Manually omit SPDX-License-Identifier changes from this patch as upstream license in upstream github repository contains long license texts and U-Boot is using just SPDX-License-Identifier. After applying this patch, a38x ddr3 code in upstream Marvell github repository and in U-Boot would be fully identical. So in future applying above steps could be used to sync code again. The only change in this patch is removal of dead code and some fixes with include files. Signed-off-by: Pali Rohár Tested-by: Chris Packham Reviewed-by: Stefan Roese --- drivers/ddr/marvell/a38x/ddr3_debug.c | 1 - drivers/ddr/marvell/a38x/ddr3_init.c | 3 --- drivers/ddr/marvell/a38x/ddr3_training.c | 11 +---------- drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c | 8 +++----- drivers/ddr/marvell/a38x/ddr3_training_leveling.c | 1 - drivers/ddr/marvell/a38x/ddr_ml_wrapper.h | 2 -- drivers/ddr/marvell/a38x/mv_ddr_plat.c | 1 - drivers/ddr/marvell/a38x/mv_ddr_plat.h | 2 ++ drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h | 15 --------------- drivers/ddr/marvell/a38x/xor.c | 2 -- 10 files changed, 6 insertions(+), 40 deletions(-) (limited to 'drivers/ddr') diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c index 22e0cc4d917..f5fc964d6f8 100644 --- a/drivers/ddr/marvell/a38x/ddr3_debug.c +++ b/drivers/ddr/marvell/a38x/ddr3_debug.c @@ -6,7 +6,6 @@ #include "ddr3_init.h" #include "mv_ddr_training_db.h" #include "mv_ddr_regs.h" -#include u8 is_reg_dump = 0; u8 debug_pbs = DEBUG_LEVEL_ERROR; diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c index 7488770268c..f878b4512bf 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.c +++ b/drivers/ddr/marvell/a38x/ddr3_init.c @@ -77,9 +77,6 @@ int ddr3_init(void) return status; } -#if defined(CONFIG_PHY_STATIC_PRINT) - mv_ddr_phy_static_print(); -#endif /* Post MC/PHY initializations */ mv_ddr_post_training_soc_config(ddr_type); diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c index 2b3af23202b..2512b58cb7b 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training.c +++ b/drivers/ddr/marvell/a38x/ddr3_training.c @@ -7,8 +7,6 @@ #include "mv_ddr_common.h" #include "mv_ddr_training_db.h" #include "mv_ddr_regs.h" -#include -#include #define GET_CS_FROM_MASK(mask) (cs_mask2_num[mask]) #define CS_CBE_VALUE(cs_num) (cs_cbe_reg[cs_num]) @@ -207,7 +205,6 @@ static int ddr3_tip_pad_inv(void) if (tm->interface_params[0].as_bus_params[sphy]. is_ck_swap == 1 && sphy == 0) { /* TODO: move this code to per platform one */ -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) /* clock swap for both cs0 and cs1 */ data = (INVERT_PAD << INV_PAD2_OFFS | INVERT_PAD << INV_PAD6_OFFS | @@ -219,9 +216,6 @@ static int ddr3_tip_pad_inv(void) DDR_PHY_CONTROL, PHY_CTRL_PHY_REG, data, data); -#else /* !CONFIG_ARMADA_38X && !CONFIG_ARMADA_39X */ -#pragma message "unknown platform to configure ddr clock swap" -#endif } } @@ -2014,9 +2008,7 @@ int ddr3_tip_adll_regs_bypass(u32 dev_num, u32 reg_val1, u32 reg_val2) static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) { /* TODO: enable this functionality for other platforms */ -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) struct init_cntr_param init_cntr_prm; -#endif int ret = MV_OK; int adll_bypass_flag = 0; u32 if_id; @@ -2050,7 +2042,6 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) } /* TODO: enable this functionality for other platforms */ -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) if (is_adll_calib_before_init != 0) { DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("with adll calib before init\n")); @@ -2081,7 +2072,6 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) return MV_FAIL; } } -#endif ret = adll_calibration(dev_num, ACCESS_TYPE_MULTICAST, 0, freq); if (ret != MV_OK) { @@ -2905,3 +2895,4 @@ unsigned int mv_ddr_misl_phy_odt_n_get(void) return odt_n; } + diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c index 5fd9a052fa0..102f9bd633f 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c @@ -6,8 +6,6 @@ #include "ddr3_init.h" #include "mv_ddr_regs.h" #include "ddr_training_ip_db.h" -#include -#include #define PATTERN_1 0x55555555 #define PATTERN_2 0xaaaaaaaa @@ -614,9 +612,9 @@ int ddr3_tip_load_pattern_to_odpg(u32 dev_num, enum hws_access_type access_type, MASK_ALL_BITS)); } - CHECK_STATUS(ddr3_tip_if_write(dev_num, access_type, if_id, - ODPG_DATA_BUFFER_OFFS_REG, - load_addr, MASK_ALL_BITS)); + CHECK_STATUS(ddr3_tip_if_write + (dev_num, access_type, if_id, + ODPG_DATA_BUFFER_OFFS_REG, load_addr, MASK_ALL_BITS)); return MV_OK; } diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c index dadb06b3181..7f7df6794a9 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c @@ -7,7 +7,6 @@ #include "mv_ddr_training_db.h" #include "ddr_training_ip_db.h" #include "mv_ddr_regs.h" -#include #define WL_ITERATION_NUM 10 diff --git a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h index ac9250f74ed..73573119658 100644 --- a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h +++ b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h @@ -13,9 +13,7 @@ #include #include -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) #define INTER_REGS_BASE SOC_REGS_PHY_BASE -#endif /* * MV_DEBUG_INIT need to be defines, otherwise the output of the diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c index 0d1df189e82..da0d63d4f7a 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c @@ -8,7 +8,6 @@ #include "mv_ddr_training_db.h" #include "mv_ddr_regs.h" #include "mv_ddr_sys_env_lib.h" -#include #define DDR_INTERFACES_NUM 1 #define DDR_INTERFACE_OCTETS_NUM 5 diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.h b/drivers/ddr/marvell/a38x/mv_ddr_plat.h index 281d4c23013..44998847c25 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.h @@ -6,6 +6,8 @@ #ifndef _MV_DDR_PLAT_H #define _MV_DDR_PLAT_H +#include + #define MAX_DEVICE_NUM 1 #define MAX_INTERFACE_NUM 1 #define MAX_BUS_NUM 5 diff --git a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h index dc6977c3345..cf5142094d3 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_sys_env_lib.h @@ -78,20 +78,6 @@ enum suspend_wakeup_status { * set '-2' * If suspend to RAM is not supported set '-1' */ -#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT -#ifdef CONFIG_ARMADA_38X -#define MV_BOARD_WAKEUP_GPIO_INFO { \ - {A38X_CUSTOMER_BOARD_ID0, -1 }, \ - {A38X_CUSTOMER_BOARD_ID0, -1 }, \ -}; -#else -#define MV_BOARD_WAKEUP_GPIO_INFO { \ - {A39X_CUSTOMER_BOARD_ID0, -1 }, \ - {A39X_CUSTOMER_BOARD_ID0, -1 }, \ -}; -#endif /* CONFIG_ARMADA_38X */ - -#else #ifdef CONFIG_ARMADA_38X #define MV_BOARD_WAKEUP_GPIO_INFO { \ @@ -109,7 +95,6 @@ enum suspend_wakeup_status { {A39X_DB_69XX_ID, -1 }, \ }; #endif /* CONFIG_ARMADA_38X */ -#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */ enum suspend_wakeup_status mv_ddr_sys_env_suspend_wakeup_check(void); u32 mv_ddr_sys_env_get_cs_ena_from_reg(void); diff --git a/drivers/ddr/marvell/a38x/xor.c b/drivers/ddr/marvell/a38x/xor.c index 98fb39eaf0f..7bc6268293e 100644 --- a/drivers/ddr/marvell/a38x/xor.c +++ b/drivers/ddr/marvell/a38x/xor.c @@ -347,10 +347,8 @@ void ddr3_new_tip_ecc_scrub(void) for (cs_c = 0; cs_c < max_cs; cs_c++) cs_ena |= 1 << cs_c; -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) /* all chip-selects are of same size */ ddr3_calc_mem_cs_size(0, &cs_mem_size_mb); -#endif cs_mem_size = cs_mem_size_mb * _1M; mv_sys_xor_init(max_cs, cs_ena, cs_mem_size, 0); total_mem_size = max_cs * cs_mem_size; -- cgit v1.2.3