From 4d555ae3f5805f354060c7b0be0557e7ed92c26a Mon Sep 17 00:00:00 2001 From: Philipp Tomsich Date: Wed, 22 Feb 2017 19:46:41 +0100 Subject: sun8i_emac: configure PHY reset GPIO via DM This ports the support for configuring a GPIO for resetting the Ethernet PHY (incl. such details as the reset polarity and pulse-length) from the Designware driver. X-AffectedPlatforms: A64-uQ7 Signed-off-by: Philipp Tomsich Reviewed-by: Jagan Teki --- drivers/net/sun8i_emac.c | 86 ++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 80 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index abdfada6461..a3dbe2823b0 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -21,6 +21,9 @@ #include #include #include +#ifdef CONFIG_DM_GPIO +#include +#endif #define MDIO_CMD_MII_BUSY BIT(0) #define MDIO_CMD_MII_WRITE BIT(1) @@ -128,11 +131,22 @@ struct emac_eth_dev { phys_addr_t sysctl_reg; struct phy_device *phydev; struct mii_dev *bus; +#ifdef CONFIG_DM_GPIO + struct gpio_desc reset_gpio; +#endif +}; + + +struct sun8i_eth_pdata { + struct eth_pdata eth_pdata; + u32 reset_delays[3]; }; + static int sun8i_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) { - struct emac_eth_dev *priv = bus->priv; + struct udevice *dev = bus->priv; + struct emac_eth_dev *priv = dev_get_priv(dev); ulong start; u32 miiaddr = 0; int timeout = CONFIG_MDIO_TIMEOUT; @@ -164,7 +178,8 @@ static int sun8i_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) static int sun8i_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, u16 val) { - struct emac_eth_dev *priv = bus->priv; + struct udevice *dev = bus->priv; + struct emac_eth_dev *priv = dev_get_priv(dev); ulong start; u32 miiaddr = 0; int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; @@ -604,7 +619,41 @@ static void sun8i_emac_board_setup(struct emac_eth_dev *priv) setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC)); } -static int sun8i_mdio_init(const char *name, struct emac_eth_dev *priv) +#if defined(CONFIG_DM_GPIO) +static int sun8i_mdio_reset(struct mii_dev *bus) +{ + struct udevice *dev = bus->priv; + struct emac_eth_dev *priv = dev_get_priv(dev); + struct sun8i_eth_pdata *pdata = dev_get_platdata(dev); + int ret; + + if (!dm_gpio_is_valid(&priv->reset_gpio)) + return 0; + + /* reset the phy */ + ret = dm_gpio_set_value(&priv->reset_gpio, 0); + if (ret) + return ret; + + udelay(pdata->reset_delays[0]); + + ret = dm_gpio_set_value(&priv->reset_gpio, 1); + if (ret) + return ret; + + udelay(pdata->reset_delays[1]); + + ret = dm_gpio_set_value(&priv->reset_gpio, 0); + if (ret) + return ret; + + udelay(pdata->reset_delays[2]); + + return 0; +} +#endif + +static int sun8i_mdio_init(const char *name, struct udevice *priv) { struct mii_dev *bus = mdio_alloc(); @@ -617,6 +666,9 @@ static int sun8i_mdio_init(const char *name, struct emac_eth_dev *priv) bus->write = sun8i_mdio_write; snprintf(bus->name, sizeof(bus->name), name); bus->priv = (void *)priv; +#if defined(CONFIG_DM_GPIO) + bus->reset = sun8i_mdio_reset; +#endif return mdio_register(bus); } @@ -696,7 +748,7 @@ static int sun8i_emac_eth_probe(struct udevice *dev) sun8i_emac_board_setup(priv); sun8i_emac_set_syscon(priv); - sun8i_mdio_init(dev->name, priv); + sun8i_mdio_init(dev->name, dev); priv->bus = miiphy_get_dev_by_name(dev->name); return sun8i_phy_init(priv, dev); @@ -713,11 +765,16 @@ static const struct eth_ops sun8i_emac_eth_ops = { static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) { - struct eth_pdata *pdata = dev_get_platdata(dev); + struct sun8i_eth_pdata *sun8i_pdata = dev_get_platdata(dev); + struct eth_pdata *pdata = &sun8i_pdata->eth_pdata; struct emac_eth_dev *priv = dev_get_priv(dev); const char *phy_mode; int node = dev_of_offset(dev); int offset = 0; +#ifdef CONFIG_DM_GPIO + int reset_flags = GPIOD_IS_OUT; + int ret = 0; +#endif pdata->iobase = dev_get_addr_name(dev, "emac"); priv->sysctl_reg = dev_get_addr_name(dev, "syscon"); @@ -762,6 +819,23 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) if (!priv->use_internal_phy) parse_phy_pins(dev); +#ifdef CONFIG_DM_GPIO + if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset, + "snps,reset-active-low")) + reset_flags |= GPIOD_ACTIVE_LOW; + + ret = gpio_request_by_name(dev, "snps,reset-gpio", 0, + &priv->reset_gpio, reset_flags); + + if (ret == 0) { + ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset, + "snps,reset-delays-us", + sun8i_pdata->reset_delays, 3); + } else if (ret == -ENOENT) { + ret = 0; + } +#endif + return 0; } @@ -782,6 +856,6 @@ U_BOOT_DRIVER(eth_sun8i_emac) = { .probe = sun8i_emac_eth_probe, .ops = &sun8i_emac_eth_ops, .priv_auto_alloc_size = sizeof(struct emac_eth_dev), - .platdata_auto_alloc_size = sizeof(struct eth_pdata), + .platdata_auto_alloc_size = sizeof(struct sun8i_eth_pdata), .flags = DM_FLAG_ALLOC_PRIV_DMA, }; -- cgit v1.2.3