From 793e6230118032a099ec42a1ea67f434721edcc0 Mon Sep 17 00:00:00 2001 From: Weijie Gao Date: Wed, 19 Jul 2023 17:15:54 +0800 Subject: spi: mtk_spim: get spi clk rate only once We don't really need to switch clk rate during operating SPIM controller. Get clk rate only once at driver probing. Signed-off-by: SkyLake.Huang Signed-off-by: Weijie Gao Reviewed-by: Jagan Teki --- drivers/spi/mtk_spim.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/mtk_spim.c b/drivers/spi/mtk_spim.c index ebb8ee8ef43..3a742d160c2 100644 --- a/drivers/spi/mtk_spim.c +++ b/drivers/spi/mtk_spim.c @@ -137,6 +137,8 @@ struct mtk_spim_capability { * @state: Controller state * @sel_clk: Pad clock * @spi_clk: Core clock + * @pll_clk_rate: Controller's PLL source clock rate, which is different + * from SPI bus clock rate * @xfer_len: Current length of data for transfer * @hw_cap: Controller capabilities * @tick_dly: Used to postpone SPI sampling time @@ -149,6 +151,7 @@ struct mtk_spim_priv { void __iomem *base; u32 state; struct clk sel_clk, spi_clk; + u32 pll_clk_rate; u32 xfer_len; struct mtk_spim_capability hw_cap; u32 tick_dly; @@ -253,11 +256,10 @@ static int mtk_spim_hw_init(struct spi_slave *slave) static void mtk_spim_prepare_transfer(struct mtk_spim_priv *priv, u32 speed_hz) { - u32 spi_clk_hz, div, sck_time, cs_time, reg_val; + u32 div, sck_time, cs_time, reg_val; - spi_clk_hz = clk_get_rate(&priv->spi_clk); - if (speed_hz <= spi_clk_hz / 4) - div = DIV_ROUND_UP(spi_clk_hz, speed_hz); + if (speed_hz <= priv->pll_clk_rate / 4) + div = DIV_ROUND_UP(priv->pll_clk_rate, speed_hz); else div = 4; @@ -404,7 +406,7 @@ static int mtk_spim_transfer_wait(struct spi_slave *slave, { struct udevice *bus = dev_get_parent(slave->dev); struct mtk_spim_priv *priv = dev_get_priv(bus); - u32 sck_l, sck_h, spi_bus_clk, clk_count, reg; + u32 sck_l, sck_h, clk_count, reg; ulong us = 1; int ret = 0; @@ -413,12 +415,11 @@ static int mtk_spim_transfer_wait(struct spi_slave *slave, else clk_count = op->data.nbytes; - spi_bus_clk = clk_get_rate(&priv->spi_clk); sck_l = readl(priv->base + SPI_CFG2_REG) >> SPI_CFG2_SCK_LOW_OFFSET; sck_h = readl(priv->base + SPI_CFG2_REG) & SPI_CFG2_SCK_HIGH_MASK; - do_div(spi_bus_clk, sck_l + sck_h + 2); + do_div(priv->pll_clk_rate, sck_l + sck_h + 2); - us = CLK_TO_US(spi_bus_clk, clk_count * 8); + us = CLK_TO_US(priv->pll_clk_rate, clk_count * 8); us += 1000 * 1000; /* 1s tolerance */ if (us > UINT_MAX) @@ -662,6 +663,10 @@ static int mtk_spim_probe(struct udevice *dev) clk_enable(&priv->sel_clk); clk_enable(&priv->spi_clk); + priv->pll_clk_rate = clk_get_rate(&priv->spi_clk); + if (priv->pll_clk_rate == 0) + return -EINVAL; + return 0; } -- cgit v1.2.3